IPMIP-GS Series Motherboard layout reference Contents Specifications summary Motherboard layout Rear panel s Internal s This manual is meant as a general reference guide. Refer to the product itself for actual specifications.
Specifications summary * The following components may be available depending on model. Model HDMI Audio Channel Super model Optional 8-channel or 6-channel H55 No HDMI 5.1 channel H57/Q57 No HDMI 8-channel or 6-channel CPU Socket : Intel Socket 1156 Sups : Clarkdale Chipset Memory Expansion slots Audio LAN USB Rear panel I/O s Internal s BIOS Form factor North Bridge : Ibex peak (H55/H57/Q57) Dual-channel, 4 slots, Non-ECC, Unbuffered, 240 pin DDR3, Max. 16GB Types: 1066/PC3-8500, 1333/PC3-10600 1x PCI Express slot (x16) 1x PCI Express slot (x4) 1x PCI Express slot (x1) 1x PCI slot ALC888S-VC2 (8-channel) or ALC662 (6-channel) Gigabit: Intel hanksville (PHY) 14x USB 2.0 s, 12/480Mbps (12 s on H55 sku) 1x Mouse (PS/2) + 1x Keyboard (PS/2) 1x Display (VGA) + 1x Display (DVI-I) * Display (HDMI) 1x LAN (RJ-45) + 2x USB 2.0 s 2x USB 2.0 s + 1x e-sata 6x Audio jacks (* Audio Channel) 1x ATX CPU power 1x ATX power 1x CPU fan 1x System fan 5x SATA s 1x Front panel audio 2x Internal SPDIF output s 1x CD in 1x Internal serial 5x USB 2.0 s 1x TPM 1x Chassis intrusion alarm 1x Front panel SPI 64Mb for H/Q SKU (AMI) microatx, 9.6 inches x 9.6 inches 2
Motherboard layout Keyboard Power selecter System Fan KB PWR ATX CPU Power CPU Fan Keyboard & mouse (PS/2) s KB +MS SYSTEM FAN CPU FAN Display s (DVI)(VGA) DVI+VGA Memory sockets *HDMI (Depending on Model) LAN & USB s HDMI LAN + USB ATX_CPU Intel LGA1156 socket XIMM2 XIMM1 XIMM4 XIMM3 ATXPOWER ATX power esata & USB s esata + USB Audio s AUDIO BATTERY TPM Chassis Intrusion Alarm PCIE X16 SLOT TPM PCIE16 slot CD in PCIE4 slot Front panel audio PCIE1 slot PCI slot Internal SPDIF output CD F_AUDIO INTRUDER PCIE X4 SLOT PCIE X1 SLOT1 SPDIF_OUT2 SPDIF_OUT1 PCI SLOT FLASH_OVERRIDE F_USB5 F_USB4 F_USB2 ROM_RECOVERY SATA0 F_USB3 SATA BUZZER BUZZER_HEADER SATA3SATA1 SATA4 SATA2 SERIAL_A F_USB1 CMOS +PW SW51 F_PANEL Buzzer header ROM recovery SATA s Internal serial Clear CMOS & password selectors Clear ME data selector Internal SPDIF output FLASH override selecter USB 2.0 s USB 2.0 s Front panel 3
Rear panel s Super model: Mouse (PS/2) Display (VGA) LAN (RJ-45) (Audio Channel: 8 or 6 channels) s Black: Side Surround L/R Out Orange: Center/Subwoofer Blue: Line In Lime: Front L/R Out Pink: Mic In Keyboard (PS/2) Display (DVI-I) Mouse (PS/2) Display (VGA) Display (HDMI) (optional) s e-sata Gray: Rear Surround L/R Out H55: LAN (RJ-45) s (Audio Channel: 5.1 channels) Blue: Line In Green: Front-L/R out Pink: Mic In Keyboard (PS/2) Display (DVI-I) s e-sata Display (VGA) LAN (RJ-45) s H57/Q57: Mouse (PS/2) (Audio Channel: 8 or 6 channels) Black: Side Surround L/R Out Orange: Center/Subwoofer Blue: Line In Lime: Front L/R Out Pink: Mic In Keyboard (PS/2) 4 Display (DVI-I) s e-sata Gray: Rear Surround L/R Out
LAN LED indications Left (ACTIVITY) Orange : Activity Off : No Link LAN Right (LINK) Green : 1G Link Orange : 100M Link Off : 10M Link Function Selectors CMOS PW 5 6 3 4 1 2 5 6 3 4 1 2 Clear CMOS 5 3 1 6 4 2 5 3 1 6 4 2 Clear Password CLEAR CMOS SELECTOR CLEAR PASSWORD SELECTOR To erase the CMOS RTC RAM user settings: 1. Turn OFF the computer and unplug the power cord. 2. Move the cap to clear for 5 to 10 secs, then move cap back to default. 3. Plug the power cord and turn ON the computer. 4. During the boot process, enter BIOS setup to re-enter user settings. To erase the CMOS RTC RAM password: 1. Turn OFF the computer. 2. Move the cap to Clear, then turn ON the computer to POST screen. 3. Press the power button to turn OFF the computer. 4. Move the cap back to Default. 5. Turn ON the computer. 6. Enter BIOS setup to verify or configure new settings. KBPWR +5VSB +5V_DUAL FLASH_OVERRIDE Flash override KEYBOARD & MOUSE POWER SELECTOR FLASH OVERRIDE (Intel Management Engine) SELECTOR SW51 CLEAR ME DATA SELECTOR Normal Clear 5
Internal s ATXPOWER ATX_CPU 5 Volts PSON# 12 Volts +12V DC +12V DC +12 Volts +12 Volts +5V Standby Power OK ATX CPU POWER CONNECTOR ATX POWER CONNECTOR CPU_FAN SYSTEM_FAN CPUFAN_PWM CPUFAN_TACH +12V +12V Rotation SYSTEM FAN CONNECTOR F_AUDIO SATA 0 SATA 3 SATA 1 SATA_TX(+) SATA_TX(-) SATA_RX(-) SATA_RX(+) GROUND F_AUDIO_DET# MIC_JD MIC*_L MIC*_R LINE*_R JACK_SENSE LINE*_L SATA_RX(+) SATA_RX(-) SATA_TX(-) SATA_TX(+) SATA 4 SATA 2 SATA CONNECTORS LINE_JD CPU FAN CONNECTOR FRONT PANEL AUDIO CONNECTOR CD1 SPDIF out +5V SPDIF out +5V SPDIF_OUT1 SPDIF_OUT2 INTERNAL SPDIF OUTPUT CONNECTORS Left Audio Channel Right Audio Channel CD IN CONNECTOR RRXD* DDTR*# DDSR*# CCTS*# SERIAL_A INTERNAL SERIAL PORT CONNECTORS 6 F_USB2 F_USB3 SBV USB*(-) USB*(+) DDC*# TTXD* RRTS*# RRT*# F_USB5 F_USB4 SBV USB*(-) USB*(+) NC F_USB1 USB CONNECTORS
Internal s (cont.) TPM SMB_CLK_M CLKRUN# LPCPD# SERIRQ +3P3VSB +BATT LDRQ1# LAD1 LAD2 LAD0 +3P3V LAD3 SMB_DATA_M S_PLTRST# NC LFRAME# CK_33M_TPM INTRUDER R_INTRUDER# NC +5VSB TPM (Trusted Platform Module) CONNECTOR CHASSIS INTRUSION ALARM CONNECTOR F_PANEL PWR_LED PWR_BTN HDLED(+) HDLED(-) Reset NC PLED(+) PLED(-) PWR HD_LED RESET FRONT PANEL CONNECTOR 7