EVAL6230QR. Demonstration board mounting the L6230Q three-phase brushless DC motor driver. Features. Description

Similar documents
BD238. Low voltage PNP power transistor. Features. Applications. Description. Low saturation voltage PNP transistor

ULN2801A, ULN2802A, ULN2803A, ULN2804A

2STBN15D100. Low voltage NPN power Darlington transistor. Features. Application. Description

L6234. Three phase motor driver. Features. Description

BD241A BD241C. NPN power transistors. Features. Applications. Description. NPN transistors. Audio, general purpose switching and amplifier transistors

LM337. Three-terminal adjustable negative voltage regulators. Features. Description

TN0023 Technical note

Single LNB supply and control IC DiSEqC 1.X compliant with EXTM based on the LNBH29 in a QFN16 (4x4) Description

DDSL01. Secondary protection for DSL lines. Features. Description

ST High voltage fast-switching NPN power transistor. Features. Applications. Description

EVL185W-LEDTV. 185 W power supply with PFC and standby supply for LED TV based on the L6564, L6599A and Viper27L. Features.

AN3332 Application note

ULN2001, ULN2002 ULN2003, ULN2004

BD135 - BD136 BD139 - BD140

L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description

AN2389 Application note

Description. Table 1. Device summary

EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.

Description. Table 1. Device summary. Order codes. TO-220 (single gauge) TO-220 (double gauge) D²PAK (tape and reel) TO-220FP

BZW50. Transil, transient voltage surge suppressor (TVS) Features. Description

AN3353 Application note

ETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards

TDA W CAR RADIO AUDIO AMPLIFIER

AN2604 Application note

MC Low noise quad operational amplifier. Features. Description

DSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards

AN2680 Application note

AN3110 Application note

STP60NF06. N-channel 60V Ω - 60A TO-220 STripFET II Power MOSFET. General features. Description. Internal schematic diagram.

ESDLIN1524BJ. Transil, transient voltage surge suppressor diode for ESD protection. Features. Description SOD323

LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description

Order code Temperature range Package Packaging

STP60NF06FP. N-channel 60V Ω - 30A TO-220FP STripFET II Power MOSFET. General features. Description. Internal schematic diagram.

AN4108 Application note

UA741. General-purpose single operational amplifier. Features. Applications. Description. N DIP8 (plastic package)

UM1613 User manual. 16-pin smartcard interface ST8034P demonstration board. Introduction

STN3NF06L. N-channel 60 V, 0.07 Ω, 4 A, SOT-223 STripFET II Power MOSFET. Features. Application. Description

STTH2R06. High efficiency ultrafast diode. Features. Description

SPC5-FLASHER. Flash management tool for SPC56xx family. Description. Features

AN3354 Application note

STTH1R04-Y. Automotive ultrafast recovery diode. Features. Description

LM135-LM235-LM335. Precision temperature sensors. Features. Description

AN3265 Application note

TDA2004R W stereo amplifier for car radio. Features. Description

AN4156 Application note

Description SO-8. series. Furthermore, in the 8-pin configuration Very low-dropout voltage (0.2 V typ.)

AN2866 Application note

AN3998 Application note

STCS A max constant current LED driver. Features. Applications. Description

Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking

Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO C = 330 pf, R = 330 Ω : Contact discharge Air discharge

VN05N. High side smart power solid state relay PENTAWATT. Features. Description

STCS1A. 1.5 A max constant current LED driver. Features. Applications. Description

VN03. ISO high side smart power solid state relay PENTAWATT. Features. Description.

AN2703 Application note

P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards

STP55NF06L STB55NF06L - STB55NF06L-1

AN3359 Application note

STEVAL-IEG001V2. Smart real-time vehicle tracking system. Features

MC34063AB, MC34063AC, MC34063EB, MC34063EC

STGB10NB37LZ STGP10NB37LZ

Obsolete Product(s) - Obsolete Product(s)

STOD2540. PMOLED display power supply. Features. Application. Description

STP10NK80ZFP STP10NK80Z - STW10NK80Z

AN4368 Application note

UM0985 User manual. Developing your STM32VLDISCOVERY application using the IAR Embedded Workbench software. Introduction

Obsolete Product(s) - Obsolete Product(s)

STB75NF75 STP75NF75 - STP75NF75FP

STB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP

AN2760 Application note

STCS2A. 2 A max constant current LED driver. Features. Applications. Description

UM1676 User manual. Getting started with.net Micro Framework on the STM32F429 Discovery kit. Introduction

How To Write To An Eeprom Memory On A Flash Memory On An Iphone Or Ipro Memory On Microsoft Flash Memory (Eeprom) On A Microsoft Microsoft Powerbook (Ai) 2.2.2

Description. IO and RF AGC. ASIC controller and power management. Carrier recovery loop. GPIO switch matrix. Lock indicator and monitoring DVBS2 FEC

ST19NP18-TPM-I2C. Trusted Platform Module (TPM) with I²C Interface. Features

AN4128 Application note

STLM20. Ultra-low current 2.4 V precision analog temperature sensor. Features. Applications

M24LRxx/CR95HF application software installation guide

LM2901. Low-power quad voltage comparator. Features. Description

STTH110. High voltage ultrafast rectifier. Description. Features

TDA2822 DUAL POWER AMPLIFIER SUPPLY VOLTAGE DOWN TO 3 V LOW CROSSOVER DISTORSION LOW QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION

AN2557 Application note

AN2824 Application note

Low power offline switched-mode power supply primary switcher. 60kHz OSCILLATOR PWM LATCH Q R4 S FF R3 R1 R2 + BLANKING + OVERVOLTAGE LATCH

.OPERATING SUPPLY VOLTAGE UP TO 46 V

Getting started with DfuSe USB device firmware upgrade STMicroelectronics extension

STB60N55F3, STD60N55F3, STF60N55F3 STI60N55F3, STP60N55F3, STU60N55F3

AN3252 Application note

SPC5-CRYP-LIB. SPC5 Software Cryptography Library. Description. Features. SHA-512 Random engine based on DRBG-AES-128

STTH3R02QRL. Ultrafast recovery diode. Main product characteristics. Features and benefits. Description. Order codes DO-15 STTH3R02Q DO-201AD STTH3R02

UM1790 User manual. Getting started with STM32L053 discovery kit software development tools. Introduction

AN820 APPLICATION NOTE INPUT/OUTPUT PROTECTION FOR AUTOMOTIVE COMPUTER

UM1727 User manual. Getting started with STM32 Nucleo board software development tools. Introduction

Description. Table 1. Device summary. Order code Package Packing

BTW N. 50 A 1200 V non insulated SCR thyristor. Description. Features. Applications

AN3270 Application note

L4940 series VERY LOW DROP 1.5 A REGULATORS

STP62NS04Z N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET

VN5R003H-E. 3 mω reverse battery protection switch. Features. Description. Application

TDA4605 CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS

Transcription:

Demonstration board mounting the L6230Q three-phase brushless DC motor driver Data brief Features Operating supply voltage from 8 to 52 V 2.8 A output peak current (1.4 A r.m.s. ) R DS(on) 0.73 Ω typ. value @ T J = 25 C Integrated fast freewheeling diodes Operating frequency up to 100 khz Non-dissipative overcurrent detection and protection Cross conduction protection Diagnostic output Uncommitted comparator Thermal shutdown Undervoltage lockout Description The L6230Q is a DMOS fully integrated threephase motor driver with overcurrent protection, optimized for FOC applications thanks to the independent current sensing. Realized in BCD multipower technology, the L6230Q features a non-dissipative overcurrent protection on the high-side power MOSFETs and thermal shutdown. An uncommitted comparator with open-drain output is available. January 2013 Doc ID 022836 Rev 1 1/8 For further information contact your local STMicroelectronics sales office. www.st.com 8

Board description EVAL6230QR 1 Board description Table 1. EVAL6230QR: electrical specifications (recommended values) Parameter Value Supply voltage range (VS) Output current rating (OUTx) Switching frequency Input and enable voltage range Comparator input voltage range L6230Q thermal resistance junction-to-ambient 8 to 52 Vdc up to 1.4 A r.m.s. up to 100 khz 0 to + 5 V 0 to + 5 V 42 C/W Figure 1. EVAL6230QR connector description 2/8 Doc ID 022836 Rev 1

Board description Table 2. EVAL6230QR: pin connections Name Type Function VS Power supply Power supply voltage PGND Ground Power ground terminal VS_FB Analog output Supply voltage feedback (1/115 divider ratio) EN Logic input IN1 Logic input Logic input half-bridge 1 EN1 Logic input Enable input half-bridge 1 IN2 Logic input Logic input half-bridge 2 EN2 Logic input Enable input half-bridge 2 IN3 Logic input Logic input half-bridge 3 EN3 Logic input Enable input half-bridge 3 DIAG Open-drain output Chip enable (active H ). When L switches OFF all power DMOS. Diagnostic pin. When L signals an overcurrent or overtemperature event. CPOUT Open-drain output Open-drain output of internal comparator CP- Analog input Inverting input of internal comparator CP+ Analog input Non-inverting input of internal comparator SENSE1 Analog output Half-bridge 1 source pin SENSE2 Analog output Half-bridge 2 source pin SENSE3 Analog output Half-bridge 3 source pin OUT1 Power output Output half-bridge 1 OUT2 Power output Output half-bridge 2 OUT3 Power output Output half-bridge 3 Doc ID 022836 Rev 1 3/8

Schematic and bill of material EVAL6230QR 2 Schematic and bill of material Figure 2. EVAL6230QR schematic diagram 4/8 Doc ID 022836 Rev 1

Schematic and bill of material Table 3. EVAL6230QR part list Part reference Part value Part description C1 220 nf/100 V Capacitor C2 100 µf/63 V Capacitor C3 10 nf/25 V Capacitor C4 220 nf/25 V Capacitor C5 5.6 nf Capacitor D1 BAT46SW Diodes R1 to R8 100 kω 5 % 0.25 W Resistor R9, R10, R11 0.47 Ω - 0.5 W Resistor R12, R13 470 kω 5 % 0.25 W Resistor R14 8.2 kω 5 % 0.25 W Resistor U1 L6230Q Three-phase BLDC motor driver in VFQFPN5x5 Figure 3. EVAL6230QR component placement 32 mm 31 mm AM16556v1 Doc ID 022836 Rev 1 5/8

Schematic and bill of material EVAL6230QR Figure 4. EVAL6230QR top layer layout Figure 5. Bottom layer layout 6/8 Doc ID 022836 Rev 1

Revision history 3 Revision history Table 4. Document revision history Date Revision Changes 15-Jan-2013 1 Initial release. Doc ID 022836 Rev 1 7/8

Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. 2013 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8 Doc ID 022836 Rev 1