CLUX-M x.3 with Multi-channels Splitter Operation Manual CLUX-M
Revision History Version No Date Summary of Change V 20080 Preliminary Release Precaution Failure to follow the precautions described below may cause damage to multi channel splitter and void the warranty. DO NOT open the case. Doing so will void the warranty. If you find problem with it, please return back to your retailer or seller who will assist you or provide you with solution. DO NOT use third-party AC adapter or power cord. Doing so may damage multi channel splitter. DO NOT bump, jar or drop contents of the products as it may damage it and result in warranty void. DO NOT set any liquids or beverages on the drive as they may damage multi channel splitter.
Table of Contents. Introduction.... 2. Application.... 3. Contents.... System Require..... 5. Features...... 6. Operation Controls and Functions. 6. Front Panel... 6.2 Rear Panel..... 7. Connection and Installation..... 8. Specifications..... 2 3 3
. Introduction The v.3 Multi-Channels Splitter the most advanced solution for signal distribution. It is compatible to v.3 specifications, a cutting-age technology which defines the support to transfer Deep Color (0-bit and 2- bit) video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a high bandwidth up to 225MHz (6.75Gbps). Besides splitting and distributing, it also does signal amplification and equalization to provide high performance I/O of audio and video. Furthermore, it support up to different output displays simultaneously with a reset bottom for back up the image unity when in disorder. Please follow this manual to begin enjoying the benefit of your.3 DA. We suggest keeping it in a safe place for future reference. 2. Application Connect one source equipment to input and four /DVI displayers to output for Multi-display instantly. For Multi-levels displays, just connect extra splitter. Back up display image 3. Contents v.3 DA Operation Manual 5V DC power supply adaptor. System Require input source equipment and output HDTVs.
5. Features.3, HDCP. and DVI.0 compliant Receiver. Deep color video up to 2bit, 080p@(2/60)Hz. One source to connect up to four displays simultaneously. HDCP keysets allows each output to work independently when connecting to a display. Splits a source up to four outputs without signal loss. Supports DVI source and DVI display by using to/from DVI adaptor cable. Dolby Digital, DTS digital audio transmission (32-92 khz Fs sample rate). Supports a wide range of PC and HDTV resolutions from VGA to UXGA and 80i to 080p. cable distance test with 080p/8bits resolution the, Input/Output source can run up to 5/5 meters. If 080p/2bits the Input/Output source can run up to 0/5 meters. Can selected EDID source from TV or this splitter. Support CEC bypass. Support system reset function. 2
6. Operation Controls and Functions 6. Front Panel INPUT EDID SYS. Reset SYNC DC 5V POWER STD TV ON OFF CLUX-M V.3 Splitter 2 3 5 6 7 Outputs : Connect each of the output ports to the display. When more than one output connected, the outputs play identical video signal simultaneously. 2 Input: Connect input port to the or DVI output of your source equipment such as DVD player or set-top-box. 3 EDID Control switch: STD(INT) and TV (EXT), default setting is TV. When EDID is on TV: Leave as it is if display is properly, unit will detect the first output source's EDID and record in the unit. If the first detected output source is DVI it will pass to next source until the fist is been detected. The detection priority is v.3 > v.2 > DVI. System Reset: Switch to ON stage, the system will send the internal CEC to the display within 8~0 minutes to force all the displays switch to port. Meanwhile, the source CEC will not functional to the system. When switch to OFF stage, the system reset function will terminate. 5 Sync LED: The LED will illuminate when the source signal is connected to the input port. 6 Power LED Indicator: The LED will illuminate when the power is connected. 7 Power: Plug the 5V DC power supply into the splitter and connect the adaptor to AC wall outlet. 3
6. Rear Panel 3 2 Outputs 2/3/: Connect each of the output ports to the display. When more than one output connected, the outputs play identical video signal simultaneously. 7. Connection and Installation Cable DVD or Set-Top-Box 8. Specifications HDTV OR display LCD TV Frequency bandwidth 2.25Gbps (single link) Input port x female port (Type A connector) Output ports x female ports (signal link) Power Supply 5VDC/2.6A (US/EU standards, CE/FCC/UL certified) Dimensions (mm) 02(W) x (D) x 38(H) Weight(g) 550 Chassis Material Metal Silk Skin Color Black Operating Temperature Operating from 0 C ~ 0 C Power Consumption 0.5w(max) OR