VialSafe DHL VialSafe UN3373 Packaging Solutions
The DHL VialSafe pack is a complete packaging system certified to meet the strict requirements of ICAO/IATA packing instructions PI650 for the safe transportation of UN3373 classified substances. At DHL we understand the importance of ensuring the safe shipping of biological samples such as human or animal materials, including excreta, secreta, blood, tissue and tissue fluids. Our objective is to deliver these special shipments safely to their destinations in the same good condition as we receive them from you. A key element in successfully doing so, is ensuring that the packaging used is compliant to the regulations governing the transport of these substances, the International Air Transport Association (IATA) and the International Civil Aviation Organisation (ICAO) regulations. Regulatory requirements, ICAO/IATA packing instructions PI650, liquid substances. The Primary receptacle must be leakproof and must not contain more than 1L substance. The secondary packaging must be leakproof. The outer packaging must be rigid and at least one surface of the outer packaging must have a minimum dimension of 100 mm x 100 mm (4 in x 4 in). It must not contain more than 4L substance (quantity excludes ice, dry ice or liquid nitrogen when used for cooling purposes.) Generally, if multiple fragile primary receptacles are placed in a single secondary packaging, they must be either individually wrapped or separated to prevent contact between them. Absorbent material must be placed between primary and secondary packaging. An itemized list of contents must be enclosed between the secondary packaging and the outer packaging. Regarding tests, the primary receptacle or the secondary packaging must be capable of withstanding, without leakage, an internal pressure of 95 kpa in the range of -40 C to +55 C (-40 F to +130 F). The complete package must be capable of successfully passing the drop test described in 6.6.1 of the IATA Instructions and the height of the drop must not be less than 1.2 m (4 ft). Compliance The complete DHL VialSafe packs successfully passed the required drop test and their secondary packaging successfully passed the 95kPa hydraulic pressure test at -40 C and +55 C. These tests were performed by the UN approved Belgian Packaging Institute (BVI) and conformity is guaranteed under test number DHL/IBE-BVI G-06.090, printed on the packaging.
VialSafe Features The DHL VialSafe packs contain sturdy corrugated outer packaging 95 kpa tested plastic bags featuring strong adhesive closure and continuous seal, making it ideal for critical liquid and substance containment multi-compartmentalized absorbent sleeves (capacity of 6 vials per sleeve) itemized list of contents tamper evident seal proper marking and labeling DHL Medical Express Flyer (optional) Dimensions Small VialSafe: Solution 1.1 Large VialSafe: Solution 1.2 Components Outer carton 95 kpa bag Absorbent sleeves Itemized list of contents Air pillows Tamper evident seal DHL Medical Express Flyer (optional) 1 1 2 1 2 1 1 1 2 4 1 4 1 1 Capacity 12 vials 24 vials Size of outer carton L: 220 x H: 160 x B: 80 mm L: 220 x H: 200 x B: 110 mm Volumetric weight < 0.5 kg < 1 kg Reorder number P93011SB P93012SB
Solutions 3.2 Softbox SB 1.0 2-8 C for 48 hours DHL packaging Solution 3.2 provides a temperature controlled environment of between 2-8 C for up to 48 hours. Solution 3.2 consists of a square DHL Softbox SB 1.0, different flexible Gel Ice Packs. After preparation of the packaging and ice packs in accordance with instructions (summer or winter configuration) the solution will maintain the temperature of your goods between 2-8 C for up to 48 hours. DHL Solution 3.2 Winter Profile DHL Solution 3.2 Summer Profile 20 38 18 36 34 16 32 Temperature Degrees c 14 12 10 8 6 ai pp Temperature Degrees c 30 28 26 24 22 20 18 16 14 ai pp 4 12 2 10 8 0 6-2 4 2-4 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 TIME (Hours) 0 0 4 8 12 16 20 24 28 32 36 40 44 48 TIME (Hours) The graphs above demonstrate how packed products maintain a temperature range of 2-8 C for 48 hours under controlled test conditions designed to simulate summer or winter enviroment. The tests were conducted using calibrated temperature recording devices placed inside the primary packaging.
Solutions 3.2 Solution 3.2 constists of the following 1 Softbox SB 1.0 (square box) 2 x 1000g single pocket gel ice pack 3 x 500g single gel pack Unique outer packaging system into which your products or trial supplies are placed. Flexible gel based different sized ice packs, which when frozen or chilled provide an optimal cooling or isolation mechanism for this solution. Packaging Dimensions: Solution 3.2 External dimensions Available product space L = B = H = 28.5cm 23.0cm 27.0cm 14.0cm 6.0cm 4.0cm Once packed, remaining space should be filled with pre-cooled bubble wrap sheet. There are alternative packaging sizes with varying product available spaces. All solutions are available with clear packing and shipping instructions. Please contact your DHL sales representative for further details on how to order.
Solutions 6.6 Softbox 30 15-25 C for 120 hours DHL s packaging Solution 6.6 provides a temperature controlled environment of between 15-25 C for up to 120 hours. Solution 6.6 consists of an oval DHL Softbox 30 and Pharmcool 1000g Gel Ice Packs. After preparation of the packaging and the gel packs in accordance with the instructions (summer or winter configuration) the solution will maintain the temperature of your goods between 15-25 C for up to 120 hours. DHL Solution 6.6 Winter Profile DHL Solution 6.6 Summer Profile 22 40 20 18 35 16 14 ai to 30 ai to Temperature Degrees c 12 10 8 6 4 mi bt Temperature Degrees c 25 20 15 mi bt 2 0 10-2 5-4 -6 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 TIME (Hours) 0 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100 104 108 112 116 120 TIME (Hours) The graphs above demonstrate how packed products maintain a temperature range of 15-25 C for 96 hours under controlled test conditions designed to simulate winter environment. The graphs above demonstrate how packed products maintain a temperature range of 15-25 C for 120 hours under controlled test conditions designed to simulate summer environment. The tests were conducted using calibrated temperature recording devices placed inside the primary packaging.
Solutions 6.6 Solution 6.6 consists of the following 1 Softbox 30 (oval box) 18 x PharmaCool 1000g Gel Ice Packs Unique outer packaging system into which products or trial supplies are placed. The flexible gel packs are chilled to provide an optimal isolation mechanism. Packaging Dimensions: Solution 6.6 External dimensions Available product space L = B = H = 51.9cm 37.4cm 43.8cm 18.0cm 10.0cm 12.0cm Once packed, remaining space should be filled with pre-cooled bubble wrap sheet. There are alternative packaging sizes with varying product available spaces. All solutions are available with clear packing and shipping instructions. Please contact your DHL sales representative for further details on how to order.
1 3
0
0
0 Product Ambient
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 81 84 87 90 93 96 99 102 105 108 111 114 117 Time (Hours) Temperature Degrees c air top mid btm -8-6 -4-2 0 2 4 6 8 10 12 14 16 18 20 22 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100 104 Time (Hours) Temperature Degrees c AIR TOP MID BTM
Solutions 12.6 Softbox QB50-20 C for 100 hours DHL s packaging Solution 12.6 provides a temperature controlled environment of -20 C for up to 100 hours. Solution 12.6 consists of a square DHL Softbox QB50 (winding and outside cartoon) which after preparation with 35 kg of dry ice (not supplied) will maintain the temperature of your goods below -20 C for up to 100 hours Temperature Degrees c DHL Solution 12.6 40 35 30 25 20 15 10 5 0-5 -10-15 -20-25 -30-35 -40-45 -50-55 -60-65 -70-75 -80 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100 TIME (Hours) ai to mi The graph above demonstrates the performance of Solution 12.6 against alternating ambient temperature, indicating the internal temperature below -20 C for up to 100 hours under controlled test conditions. The tests were conducted using calibrated temperature recording devices placed inside the primary packaging.
Solutions 12.6 Solution 12.6 consists of the following 1 Softbox QB 50 (square box) Unique insulation system and outer carton into which your products or trial supplies are placed and surrounded with 35 kilograms of Dry Ice Pellets (not supplied). Packaging Dimensions: Solution 12.6 External dimensions Internal dimensions L = B = H = 52.5cm 44.0cm 48.5cm The test results given are based on the use of a simulated life science product measuring 38.5 cm x 28.5 cm x 25.0 cm. Remaining space of the Styropack is taken by 35 kg of Dry Ice Pallets. Use of larger products will result in less space for dry ice pallets and therefore reduce duration of the temperature -20 C. There are alternative packaging sizes with varying product available spaces. All solutions are available with clear packing and shipping instructions. Please contact your DHL sales representative for further details on how to order.
Solutions 12.7 Softbox QB50 15-25 C for 72 hours DHL s packaging solution 12.7 enables goods to be maintained between 15-25 C for a period up to 72 hours. Solution 12.7 consists of Softbox QB50 including coolants and a protective wrap for summer use. After preparation of the packaging and ice packs in accordance with instruction, the solution will maintain your products between 15-25 C for up to 72 hours. Solution 12.7 is using the same components as Solution 12.5 in ambient temperature environment. Temperature Degrees c DHL Solution 12.7 Summer Profile 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100 104 108 112 116 120 TIME (Hours) AIR TOP MID BTM Temperature Degrees c DHL Solution 12.7 Winter Profile 24 22 20 18 16 14 12 10 8 6 4 2 0-2 -4-6 -8 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 TIME (Hours) AIR TOP MID BTM This graph above demonstrates how packed products are maintained within a temperature range of 15-25 C for 120 hours under controlled test conditions designed to simulate summer environment. This graph above demonstrates how packed products are maintained within a temperature range of 15-25 C for 80 hours under controlled test conditions designed to simulate winter environment. The tests were conducted using calibrated temperature recording devices placed inside the primary packaging.
Solutions 12.7 Solution 12.7 consists of the following 1 Softbox QB50 1 Inner Carton 4 Pharmacool 3000 Ice Packs 2 Pharmacool 2000 Ice Packs Protective wrap Unique insulation system and outer carton into which your products or trial supplies are placed. Protective packaging for your products or trial supplies to hold them in position within Pharmacool Ice Packs. Primary cooling medium. Secondary cooling medium. Additional insulation to prevent freezing of products. Packaging Dimensions: Solution 12.7 External dimensions Available product space L = B = H = 52.5cm 44.0cm 48.5cm 38.5cm 28.5cm 25.0cm There are alternative packaging sizes with varying product space available. All solutions are available with clear packing and shipping instructions. Please contact your DHL sales representative for further details on how to order.
Solutions 13.1 Softbox Styropack 20L -20 C for 72 hours DHL s packaging Solution 13.1 provides a temperature controlled environment of -20 C for up to 72 hours. Solution 13.1 consists of a square DHL Softbox Styropack 20L, a 95 kpa bag large for 36 vials and absorbent sleeves. After preparation with 9.5 kg of Dry Ice (not supplied) this solution will maintain the temperature of your goods below -20 C for up to 72 hours. DHL Solution 13.1 Temperature Degrees c 45 40 35 30 25 20 15 10 5 0-5 -10-15 -20-25 -30-35 -40-45 -50-55 -60-65 -70-75 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 TIME (Hours) Air Lower Left Phial Sleeve Lower Middle Phial Sleeve Lower Right Phial Sleve Upper Left Phial Sleeve Upper Middle Phial Sleeve Upper Right Phial Sleve The graph above demonstrates the performance of Solution 13.1 against alternating ambient temperature, indicating the internal temperature below -20 C for up to 72 hours under controlled test conditions. The tests were conducted using calibrated temperature recording devices placed inside the primary packaging.
Solutions 13.1 Solution 13.1 consists of the following 1 Styropack 20L (square) box 6 x absorbent sleeves holding 6 vials each Unique packaging system into which your products or trial supplies are placed and surrounded with 9.5 kilograms of Dry Ice Pellets (not supplied) which is required to maintain the temperature of -20 C for up to 72 hours. 1 x 95 kpa speciment transport bag, large for 36 vials. Packaging Dimensions: Solution 13.1 External dimensions Internal dimensions L = B = H = 39.0cm 35.0cm 31.0cm The test results given are based on the use of a simulated life science product measuring 30.5 cm x 26.0 cm x 10.0 cm. Remaining space of the Styropack is taken by 9.5 kg of dry ice pallets. Use of larger products will result in less space for dry ice pallets and therefore reduce duration of the temperature -20 C. There are alternative packaging sizes with varying product available spaces. All solutions are available with clear packing and shipping instructions. Please contact your DHL sales representative for further details on how to order.
Solutions 13.2 Softbox Styropack 20L -20 C for 96 hours DHL s packaging Solution 13.2 provides a temperature controlled environment of -20 C for up to 96 hours. Solution 13.2 consists of a square DHL Styropack 20L box, a 95 kpa bag large for 36 vials and absorbent sleeves. After preparation with 14 kg of dry ice (not supplied) this solution will maintain the temperature of your goods below -20 C for up to 96 hours. DHL Solution 13.2 Temperature Degrees c 45 40 35 30 25 20 15 10 5 0-5 -10-15 -20-25 -30-35 -40-45 -50-55 -60-65 -70-75 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 TIME (Hours) Air Lower Left Phial Sleeve Lower Middle Phial Sleeve Lower Right Phial Sleve Upper Left Phial Sleeve Upper Middle Phial Sleeve Upper Right Phial Sleeve The graph above demonstrates the performance of solution 13.2. against alternating ambient temperature, indicating the internal temperature below -20 C for up to 96 hours under controlled test conditions. The tests were conducted using calibrated temperature recording devices placed inside the primary packaging.
Solutions 13.2 Solution 13.2 consists of the following 1 Styropack Softbox 1020L Unique (square) box 6 x absorbent sleeves holding 6 vials Unique packaging system into which your products or trial supplies are placed and surrounded with 14 kgs of Dry Ice Pellets (not supplied). 1 x large 95 kpa speciment transport bag large for 36 vials. Packaging Dimensions: Solution 10.0 External dimensions Available product space L = B = H = 39cm 35cm 31cm The test results given are based on the use of a simulated life science product measuring 30.5 cm x 26.0 cm x 4.0 cm. Remaining space of the Styropack is taken by 9.5 kg of dry ice pallets. Use of larger products will result in less space for dry ice pallets and therefore reduce duration of the temperature -20 C. There are alternative packaging sizes with varying product available spaces. All solutions are available with clear packing and shipping instructions. Please contact your DHL sales representative for further details on how to order.