PCM-9382 Intel Core 2 Duo 3.5" SBC with 48-bit LVDS/USB/ LAN/SATAII Startup Manual Packing List Before installation, please make sure that you have received the following: 1 PCM-9382 SBC 1 Startup Manual 1 Utility CD 1 ATX Power cable p/n: 1700000265 2 SATA DATA Cable p/n: 1700006291 1 Keyboard/Mouse Cable p/n: 1700060202 1 Dual Part USB Cables p/n: 1700006292 1 2nd serial cable for p/n: 1701140201 RS232/422/485 1 ATX Power cable p/n: 1700000265 Mini Jumper pack p/n: 9689000002 1 CPU Cooler for Socket type model If anything is missing or damaged, contact your distributor or sales representative immediately. Note 1: For detailed contents or the PCM-9382, please refer to the enclosed CD Disc (in PDF format). Note 2: Acrobat Reader is required to view any PDF file. Acrobat Reader can be downloaded at: http://www.adobe.com/products/acrobat/ readerstep2.html(acrobat is a trademark of Adobe). For more information on this and other Advantech products, please visit our websites at: http://www.advantech.com http://www.advantech.com/eplatform For technical support and service, please visit our support website at: http://www.advantech.com/support/ This startup manual is for PCM-9382 Series Rev.A1 Part No. 2006938200 1st Edition Mar. 2008 Specifications General CPU: - Intel Socket 478 Mobile Core 2 Duo/Core Duo FSB 533/667 MHz and Celeron M 533 MHz. - Embedded Intel Celeron M 423 1.06 G on board CPU System Chipset: Intel 945GM GMCH/ICH7M Chipset BIOS: AWARD 4-Mbit Flash BIOS System Memory: 200-pin DDR2 SODIMM socket 128 MB to 1 GB, accepts 128/256/512/ 1 G (DDR2) 400/533/667 DRAM Power Management: APM1.2, ACPI support S1, S5 SSD: CompactFlash type I Watchdog: Timer Single chip Watchdog 255- level interval timer, setup by software Expansion: MIO interface Battery: 2-pin wafer box for external battery I/O Interface: 2 x SATAII, 1 x KB/MS, 1 x RS-232, 1 x RS-232/422/485, USB: 5 x USB 2.0 compliant ports (1 port on board connector, 4 ports pinhead) Audio: HD Audio Supports Line -in, Line-out, Microphone-in IrDA: N/A GPIO: 8-bit general purpose input/output Ethernet Chipset: - Intel 82551QM (10/100 Mbps) - Intel 82541PI (10/100/1000Mbps) (Optional) Interface: 1 x RJ45 Display Chipset: Intel 945GM chip integrated Memory Size: Optimized Shared Memory Architecture, supports up to 64 MB frame buffer using system memory PCM-9382 Core 2 Duo 3.5" SBC with 48-bit LVDS/USB/LAN/SATA PCM-9382 Startup Manual 1
Specifications Resolution: CRT Display mode: pixel resolution up to 1600 x 1200 at 85-Hz and 2048 x 1536 at 75-Hz LCD Display mode: Dual channel LVDS panel supports up to UXGA panel resolution with frequency range from 25 MHz to 112 MHz LVDS: Hirose connector support up to 2 channel (2 x 24-bit) LVDS LCD Panel Dual Independent CRT + 48-bit Mechanical Environment Dimensions: 146 x 102 mm (5.7" x 4") Power Supply Type: AT or ATX Power Supply Voltage: AT/ATX, 5 V/12 V, single 5V support by fanless model Power Consumption: (Core Duo 2.16 GHz with 512 MB DDR2 memory) Typical: 4.64 A @ 5 V, 0.09 A @ 12 V Max: 5.14 A @ 5 V, 0.16 A @ 12 V Operating Humidity: 0% ~ 90% relative humidity, non-condensing Operating Temperature: 0 ~ 60 C (32 ~ 140 F) Weight: 340g (with Heatsink) Storage Temperature: : Standard products (0 ~ 60 C) Storage temperature: -20 ~ 70 C Storage Relative Humidity: Standard products (0 ~ 60 C) Relative Humidity: 95% @ 60 C Jumpers and Connectors The board has a number of jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the jumpers and connectors. Jumpers Label J1 J2 J3 J4 Clear CMOS LCD Power COM2 Audio Power PCM-9382 Connector List Label CN1 ATX Power Input CN2 CPU FAN CN3 DDR2 SODIMM CN4 External Battery CN5 CRT CN6 LVDS Panel CN7 Inverter Power CN8 SATA0 CN9 CompactFlash CN10 SATA1 CN11 HDD & PWR LED CN12 Power Switch CN13 GPIO CN14 COM1 CN15 COM2 CN17 Internal USB1/2 CN18 PS2 (KB & MS) CN19 External USB CN20 Audio CN21 LAN1 CN22 MIO 2.0 CN23 Internal USB3/4 CN24 SMBus 2 PCM-9382 Startup Manual
Jumpers and Connectors J1 Clear CMOS (1-2) Normal (2-3) Clear CMOS S2 COM2 S2(1 ON) RS-232 S2(2 ON) RS-485 S2(3 ON) RS-422 J2 LCD Power (1-2) +5V (2-3) +3.3V J3 COM2 (1-2) RS-232 (3-4) RS-485 (5-6) RS-422 J4 Audio Power (1-2) +12 V to +5 V LDO (2-3) +5 V PCM-9382 Startup Manual 3
PCM-9382 Connectors (component side) PCM-9382 Connectors (solder side) 4 PCM-9382 Startup Manual
PCM-9382 Mechanical Drawing (component side) PCM-9382 Mechanical Drawing (solder side) PCM-9382 Startup Manual 5