2010 MACK LUBRICANT PROGRAM Bulldog Product Information
Bulldog Engine Oil Bulldog EO-O Premium Plus oils with their unique and optimized formulation are designed to provide exceptional performance in both newer and older engines. Bulldog EO-O Premium Plus oils are formulated for superior soot-viscosity control for long engine and oil life They also reduce low temperature sludge and high temperature deposits by having balanced thermal and oxidative stability They will maintain their viscosity in severe, high temperature service and promote long engine and component life
Bulldog EO-O Premium Plus 10W-30 & 15W-40 Extra high performance diesel engine oil that helps extend engine life in some of the most severe on and off-highway applications while delivering outstanding performance in modern, high-output, low-emission engines Excellent soot-viscosity control Outstanding thermal/oxidative stability Excellent oil consumption control Key Product Benefit Greater engine efficiency, long engine/oil life Reduced low temp sludge and high temp deposits Less make-up oil * Excellent low temperature pumpability Improved cold start performance * Compared to mineral oils
Bulldog EO-O Premium Plus 10W-30 Fuel Efficiency Having the optimum viscosity at each operating condition will minimize overall engine friction and reduce fuel consumption. Two things are important: viscosity itself as well as viscosity retention Viscosity A multigrade lubricant with a lower viscosity grade could provide improved savings For example, using a Bulldog EO-O Premium Plus 10W-30 compared to Bulldog EO-O Premium Plus 15W-40 would provide a better chance of capturing the potential fuel savings Viscosity Retention Viscosity can increase over time because of lubricant break-down and contamination. Soot particles, contaminants, and by-products of oil break-down can lead to oil thickening, leading to reduced fuel economy and compromise wear protection Mack 10W-30 products provide outstanding protection against lubricant break-down and contamination that promotes the potential for improved fuel savings from the outstanding viscosity retention side as well as from its lower viscosity grade
Bulldog GO-J SAE 80W-90 & 85W-140 Extra high performance heavy-duty gear lubricants formulated from select base oils and an advanced additive system. These lubricants are engineered for performance in heavy-duty commercial transmissions, axles, and final drives where extreme pressures and shock loading are expected. Outstanding thermal/oxidative stability Good protection against low speed/high torque wear and high speed scoring Excellent low temperature pumpability Wide multi-purpose capability Key Product Benefit Extended gear and bearing life due to minimal deposits and longer seal life Increased load carrying capability and reduced operating costs Reduced wear and ease of start-up Reduced number of gear lubricants to simplify inventory and minimize misapplication * * Compared to mineral oils ** Bulldog GO-J SAE 85W-140 is not available in Canada
Bulldog Synthetic Gear Lubricant 75W-90 Synthetic drivetrain lubricants engineered to meet some of the most demanding extended drain requirements. These products are designed for use in heavy-duty drivetrains that require gear lubricants with excellent loadcarrying capability and where extreme pressures and shock loading are expected Outstanding thermal/oxidative stability Outstanding protection against low speed/high torque wear and high speed scoring Exceptional shear stability Excellent low temperature fluidity vs. mineral oils Key Product Benefit Extended gear and bearing life due to minimal deposits and longer seal life Increased load carrying capability and longer equipment life resulting in lower maintenance costs Retains viscosity and film strength under severe operating conditions to prevent wear Reduced wear and ease of start-up * * Compared to mineral oils
Bulldog Synthetic Transmission Fluid Fully synthetic, manual transmission lubricant engineered to meet some of the most demanding extended drain requirements. It is recommended for year-round lubrication of manual transmissions in light to severe duty on- and off-highway equipment operating in a wide range of environments Excellent load carrying, anti-wear, and EP performance Outstanding protection against deposit formation Key Product Benefit Extends transmission life and reduces cost of operation Longer seal life, extended drain and service intervals * Outstanding thermal/oxidative stability Extends component life and improves efficiency Exceptional shear stability Excellent low temperature fluidity vs. mineral oils * Compared to mineral oils Minimizes wear during severe operation Reduces wear during cold temperatures and improves shifting with quicker starts
Bulldog High Performance Grease NLGI 2 Extended service lithium complex greases intended for a wide variety of applications and severe operating conditions. These greases were designed to outperform conventional products by applying cutting edge,lithium complex manufacturing technology Superb resistance to water washout and spray-off Key Product Benefit* Assures proper lubrication and protection even in some of the most severe water exposure conditions Highly adhesive and cohesive structure Excellent grease tenacity, reduced leakage and extended relubrication intervals for reduced maintenance requirements Resistance to thermal, oxidative and structural degradation at high temperature Anti-wear and EP performance Extended grease life and enhanced bearing protection in high temperature applications offers reduced maintenance and replacement cost benefits Reliable protection of lubricated equipment, even under conditions of high sliding and shock loading with potential for extended equipment life and reduced unanticipated downtime * Compared to mineral oils
Bulldog Synthetic ATF Enhanced, long-term frictional properties Fully synthetic fluid with proprietary formulation approved by Allison Transmission, Inc. for the Allison TES-295 Specification (approval number = AN-1010007*) Key Product Benefit Improves and extends transmission efficiency, smooth shifting performance and fuel economy ** Outstanding thermal/oxidative stability Outstanding film-strength and anti-wear properties Excellent low-temperature fluidity Keeps transmissions clean to extend life and performance even under severe driving conditions Significant wear reduction and longer transmission life Provides prompt and reliable lubrication under extreme conditions Compatible with mineral ATF fluids * http://www.allisontransmission.com/service/autoapp/172/viewpage.jsp?thispage=3 ** Compared to mineral oils Reduced concern in top-off situations and excellent seal materials leakage control
Bulldog All-Weather Hydraulic Oil 32 & 68 Excellent Hydraulic Efficiency High performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high pressure, industrial and mobile equipment hydraulic systems. These oils are constructed from selected base oils and a proprietary additive system to provide well balanced performance in a range of applications Key Product Benefit Potentially reduced energy consumption or increased system responsiveness * Ultra Keep Clean Performance Shear Stable, High Viscosity Index Oxidation and Thermal Stability Reduced system deposits leading to reduced machine maintenance and increased component life Sustained component protection over a wide temperature (i.e. All-Weather ) Extends fluid life even under harsh operating conditions Anti-wear properties Helps reduce wear and protects pumps and components for extended equipment life * Compared to mineral oils ** Bulldog GO-J SAE 85W-140 is not available in Canada
US Mack Bulldog Lubricant Part Numbers
Canada Mack Bulldog Lubricant Part Numbers