The complete system Infusion
Infusion Systems Universal spike Safe from experience For over 50 years, the name CODAN has stood for reliable and universally applicable infusion systems. Our innovative development and production, subject to the most stringent quality criteria, guarantees that it will stay that way in the future. Sterile vent with valve Spike for semi-rigid containers and bags Drip chamber Spike for bags Level ring Fluid filter Drip chambers Full of expertise: Our drip chambers consist of precisely matched high tech components. This starts with the spikes whose differently shaped tips cleanly and safely penetrate all common infusion containers with ease and fit securely. If a vent is required, a valve-controlled vent can be selected, which protects the sterile air filter against wetting or clogging with the fluid. The vent always works whatever your needs. Two versions are available: For the standard model 20 drops per ml, for the mini drip, it s 60 drops per ml. The level indicator helps set the fluid level; the flexible and non-reflective material of the chamber ensure that the filling and reading are user-friendly both under artificial and daylight conditions. The fluid filter at the system outlet fulfils another safety function. It prevents particles larger than 15 µm from flowing through.
Tubing Safety first: CODAN has completely ceased using the contentious plasticiser DEHP. The NO DEHP tubing for gravity and pump-driven sets is used by CODAN as standard for all PVC tubing products. PVC tubing is DEHP-free and is suitable for all applications. Three-way tap with Luer-Lock connector Three-way tap with SWAN-LOCK connector Transparent but still green: green line products from CODAN contain no PVC and plasticisers. They are also universally applicable. Besides the important medical aspects, there are also significant advantages in terms of environmentally-friendly disposal. Y-SWAN-LOCK injection adapter Precision roller clamp Roller clamp Regulation rather than trial and error: With the precision roller clamp, the administration of the infusion solution is not only quicker but permanently more precise for the clinician to adjust. The end piece of the set can be fixed in a holder on the side during preparation. During ongoing infusion a clamping device on the roller clamp can be used for temporary interruption. When the system is disposed of after use, the clamp housing serves as stab protection for the spike.
Adapters It also works without needles: Three-way taps and latex-free adapters are used whenever an additional transfer system has to be connected or an additional medication administrated. The new generation of SWAN-LOCK components are particularly safe and userfriendly, because they work according to the needle-free principle. Access can be activated with a positive Luer- Lock connector. There is therefore no risk of injury and contamination for clinician or the patient. Another advantage of the SWAN adapters: They can be disinfected and do not require an additional cap. Y injection adapter Y injection adapter with check valve FlowStop protective cap Connection piece with rotating lock-thread Connection piece with rotating lock-thread and check valve Connections It depends on the turn: All lockable connections from CODAN are designed according to the Luer-Lock standard. The connection to the catheter can be made safely and sealed in just a few easy steps. If the connectors have a rotating Luer thread this is especially easy on the patient. With all versions including an integrated check valve, the return flow of infusion fluid or blood is prevented. Standard connection piece Connection piece with check valve The connection pieces have a FlowStop protective cap with filter. This allows the air to escape in a controlled manner, but not fluids. The infusion system can therefore be vented simply and safely.
Sets for infusion pumps Every drip counts: CODAN infusion systems are ideally suited for use in volumetric infusion pumps that do not require specific or complex special sets. So comparatively inexpensive, pressure-tight standard sets, such as the A 707 V from CODAN ARGUS, can be used in pumps. It does not require expensive components like silicone segments or pump cartridges. There is a broad selection available: all the tubing used in pressure-tight infusion systems from CODAN, whether PVC/NO DEHP or green line (PVCfree), can be used in the A 707 V thereby offering flexibility in selection. Of course we also offer infusion systems equipped with our patented Anti Free-Flow clamp. These products are specifically for use in the A 708 V infusion pump from CODAN ARGUS. The clamp automatically closes the flow when the pump door is opened and the set is removed from the pump and this prevents Free-Flow. The IVIP 708 infusion systems are available in various configurations and also with the various tubing materials. Both the A 707 V and A 708 V volumetric infusion pumps from CODAN ARGUS not only work with high precision, they are also valued by virtue of their easy operation and safe use. Safety first: The Anti Free-Flow system of the ARGUS 708 V. The patented Anti Free-Flow clamp on IVIP 708 sets automatically blocks the flow of fluid on opening the pump door and removal of the set from the pump.
CODAN Worldwide CODAN is internationally known as a manufacturer and supplier of disposable medical administration systems. The CODAN Companies worldwide employs more than 1,500 people. The name CODAN represents reliability, quality and precision supported by the knowledge and experience of more than 50 years of research and development. Our worldwide production facilities and sales organisations deliver first class service to all our customers in the healthcare sector. CODAN Companies CODAN Medizinische Geräte GmbH & Co KG BRD CODAN pvb Critical Care GmbH BRD CODAN pvb Medical GmbH BRD CODAN PORTUGAL SA Portugal CODAN 11 SA Portugal CODAN US Corporation California USA CODAN Inc. California USA CODAN NORGE A/S Norge CODAN TRIPLUS AB Sverige CODAN Limited Great Britain CODAN FRANCE Sarl France CODAN Medical AG Schweiz CODAN ARGUS AG Schweiz CODAN BV Nederland CODAN s.r.l. Italia CODAN Medical GmbH Österreich CODAN Steritex ApS Danmark CODAN Medical ApS Danmark CODAN DEHA ApS Danmark The CODAN range of products Infusion Sets Transfusion Sets Extension Lines and Manifold Connectors I.V. Accessories I.V. Filters and Filter Systems Paediatric Products Withdrawal, Preparation and Administration Sets CODAN CYTO Chemoprotect Products Syringes Invasive Bloodpressure Monitoring Systems I.V. Pumps Continence Care Products Other CODAN Sets Compliance of the established quality management systems with the provisions of EN ISO 13485 and the European Directive 93/42/EEC was certified by the competent Notified Bodies. Thus we are entitled to mark our products with: TÜV Product Service for CODAN Medizinische Geräte GmbH & Co KG D-23738 Lensahn Lloyd's Register Quality Assurance for CODAN Steritex ApS DK-3060 Espergærde Danish Medical Devices Certification for CODAN Medical ApS DK-4970 Rødby TÜV Product Service for CODAN pvb Critical Care GmbH D-85661 Forstinning CODAN Medizinische Geräte GmbH & Co KG Stig Husted-Andersen Straße 11 D-23738 Lensahn Tel. +49 (0) 43 63 51 11 Fax +49 (0) 43 63 51 12 14 www.codan.de The decisive connection 94.2656.01