1 st step of any repair process.

0

Product Name Comment 1 st step of any repair process. 965-89784 PREPWASH 20L Developed for the pre cleaning of surfaces prior to sanding and paint application. Removes waxes, oil, dirt and silicone based products. 1

Product Name Hardener Mix Comment 485-S0015 Adhesion Promoter 4L Thinner Not Applicable RFU Applied over sound painted surfaces for adhesion. Colour can be applied directly over after 5 minutes flash off. 2

Product Name Mix Comment 488-S0014 2K Epoxy Primer 4L 4 : 1 : 10-20% Excellent rust inhibiting properties. Use as a adhesion primer for substrates such as panel steel. Can be used as Wet on Wet for whole panels. Can apply Plastic filler over. Use hardener according to size and temperature of job 980-89794 RP Hardener or 980-89291 Normal Hardener <20 0 920 89819 RP THINNER FAST 20L 20 0 to 30 0 920 89292 2K THINNER NORMAL 1L + 4L + 20L >30 920 89847 2K THINNER High Temp(slow) 20L 3

Product Name Mix Comment 488-S0042 DP 42 Epoxy Primer Pt A 4L 4 : 1 Excellent adhesion to metal surfaces. Very good rust inhibiting properties. Excellent Flexibility, Chemical and water resistance. Apply topcoat after 2hour without sanding. 980-S0043 DP 42 Pt B 1L 980-S0046 DP 42 Fast Pt B 1L <20 0 920 89819 RP THINNER FAST 20L 20 0 to 30 0 920 89292 2K THINNER NORMAL 1L + 4L + 20L >30 920 89847 2K THINNER High Temp(slow) 20L 4

Product Name Hardener Mix Comment 485-S0040 CV Ultraetch Primer 4L Thinner No Hardener required Thin up to 50% 920-S0003 Autosolv GP thinner. Single Pack ISO Free product for mild steel, Aluminum, and Stainless Steel 316. Dry time 25 o 45mins. Sand P600-P800 5

Product Name Mix Comment Use hardener according to size and temperature of job 488-89287 2K HS Primer 4L 980-89794 RP Hardener 1L or 980-89291 Normal Hardener 1L 4 : 1 : 5-10% High Build 2-Pack Primer. Apply maximum 3 coats. 5min flash between coats. Can be baked and Infra Red. <20 0 920 89819 RP THINNER FAST 20L 20 0 to 30 0 920 89292 2K THINNER NORMAL 1L + 4L + 20L >30 0 920 89847 2K THINNER High Temp(slow) 20L 6

Product Name Mix Comment 488-89907 Miracle HB Primer 5 : 1 : 10% High Build Polyurethane Primer. Easy sanding properties. Better in cold Temperatures. Can be baked and Infra Red. 980-89906 HB 5:1 Multi Hardener 0.95L <20 0 920 89819 RP THINNER FAST 20L 20 0 to 30 0 920 89292 2K THINNER NORMAL 1L + 4L + 20L >30 0 920 89847 2K THINNER High Temp(slow) 20L 7

Product Name Hardener Mix Comment 485-S0024 High Build 1K Primer 4L Thinner No Hardener required Thin up to 50% 920-89292 2K Normal thinner. Single Pack ISO Free product for mild steel, Aluminum, and Fiberglass Alternative to using 2-Pack Primer fillers 8

Product Name Mix Comment 965-S0017 Plastic Cleaner 4L 485-89943 Plastic Primer 5L RFU RFU Removes release agents and contaminations. Wipe on wipe off method. Don t allow to dry on plastic surface. Use prior to sanding and again prior to painting. Primer for plastic substrates such as bumper bars or spoilers. Colour can then be directly applied without further priming. 9

Product Name Hardener Mix Comment 485-S0048 Bumper Bar Primer 1L Thinner No Hardener required Thin up to 50% 920-S0003 Autosolv GP thinner. Single Pack Product for repairs to most plastic substrates offering excellent adhesion, Flexibility and is fast drying 10

Product Name Mix Comment 488 89288 2K 2:1 HS Clearcoat 1L & 5L 2 : 1 : 0-5% Premium quality high gloss two pack clear top coat. 2 coats Application. 5min flash between coats. Bake 30mins @ 60 C Use 485-89930 Flex Additive for Bumper Bars. 980-89790 RP HARDENER FAST 1L & 2.5L Use hardener according to size and temperature of job 980-89290 2K HARDENER Normal 0.5L & 1L & 2.5L 980-S0028 2K HARDENER Slow 1L & 2.5L <20 0 920 89819 RP THINNER FAST 20L 20 0 to 30 0 920 89292 2K THINNER NORMAL 1L + 4L + 20L >30 920 89847 2K THINNER High Temp(slow) 20L >35 0 920 89963 X Slow Thinner 4L 11

Product Name Hardener Thinner Mix Comment 488 S0025 3:1 Hyper Clear 4.08L 980-S0026 or 980-S0033 920-89909 or 920-89908 or 920-89910 3 : 1 : 10-35% Premium quality high gloss two pack clear top coat. 2 coats Application. 5min flash between coats. Bake 30mins @ 60 C Can be matted down with 485-89915 MT Flat Base. 980 S0026 HC 3:1 STD Hardener 0.96L 980 S0033 HC 3:1 FAST Hardener 0.96L <20 0 920 89819 RP THINNER FAST 20L 20 0 to 30 0 920 89292 2K THINNER NORMAL 1L + 4L + 20L >30 920 89847 2K THINNER High Temp(slow) 20L >35 0 920 89963 X Slow Thinner 4L 12

Product Name Mix Comment 488 S0016 2K MS Clearcoat 20L 2 : 1 : 0-5% Premium quality high gloss two pack clear top coat. 2 coats Application. 5min flash between coats. Bake 30mins @ 60 C Can be matted down with 485-89915 MT Flat Base. 980-89790 RP HARDENER FAST 1L & 2.5L Use hardener according to size and temperature of job 980-89290 2K HARDENER NORMAL 0.5L & 1L & 2.5L 980-S0028 2K HARDENER SLOW 1L & 2.5L <20 0 920 89819 RP THINNER FAST 20L 20 0 to 30 0 920 89292 2K THINNER NORMAL 1L + 4L + 20L >30 920 89847 2K THINNER High Temp(slow) 20L >35 0 920 89963 X Slow Thinner 4L 13

Product Name Mix Comment 488 89917 MT 10:1 Clear 4.26L 10:1:10-20% High quality two pack clear Coat for rapid handling of small repairs and touch up work. 1 2 panels recommended. 2 single wet coats. 5 minutes air flash Bake 30 minutes @ 60 C 485-89930 Flex Additive. 485-89915 Flat base 980-89916 MT 10:1 STANDARD HARDENER 0.9L <20 0 920 89819 RP THINNER FAST 20L 20 0 to 30 0 920 89292 2K THINNER NORMAL 1L + 4L + 20L >30 920 89847 2K THINNER High Temp(slow) 20L >35 0 920 89963 X Slow Thinner 4L 14

Product Name Mix Comment 427 Line PR 2K 10 : 1 0.9L & 3.7L 980-89290 MT 10:1 STANDARD HARDENER 0.9L 10:1:40-60% High quality two pack direct gloss solid colour tinters. Single wet coats till coverage. 5-10min flash off between Coats. Bake 20mins @ 60 o C Range of thinners to suit size and temperature of job <20 0 920 89819 RP THINNER FAST 20L 20 0 to 30 0 920 89292 2K THINNER NORMAL 1L + 4L + 20L >30 920 89847 2K THINNER High Temp(slow) 20L >35 0 920 89963 X Slow Thinner 4L 15

Product Name Hardener Thinner Mix Comment 440 Line PT Solid, Metallic & Pearlescent Basecoat Tinters 0.9L+3.7L+ 0.3L 480 Line PT Exotica Special Effect Base Coat Tinters 0.3L Optional 980 89920 5% 920-89908 (Low Temp) 920-89909 (STD) 920-89910 (High Temp) 1 : 1 Premium range of high quality single pack metallic, pearlescent and solid colour basecoat tinters. Maximum 5% hardener. 485-89898 PT Flat Base 3.7L PT Flat base is added in colour Formulations. Hardener, thinner and mix info N/A Enables a reorientation of metallic and pearl particles to produce a darker face colour effect, high lighting the coarseness of the metallic or pearl particle side view. 16

Product Name Hardener Thinner Mix Comment 485 89914 PT Flip Flop Adjuster 0.3L PT Flip Flop is added in colour Formulations and for colour matching. Hardener, thinner and mix info N/A Enables a reorientation of metallic and pearl particles to produce a brighter colour effect, without highlighting the coarseness of the metallic or pearl particle. 485-89918 PT Blending Clear 3.7L 485 89913 PT Universal Blender 3.7L Not Applicable 920-89908 (Low Temp) 920-89909 (STD) 920-89910 (High Temp) (Blending Clear) 20% to 80% (Universal Blender) PT Blending Clear used in 3 Layer Pearl Formulations Mixing Blending Clear and Universal Thinner to achieve a consistent, even blend out of colours. Also fills fine sand scratch marks and prevents metallic Profiling. 17

Product Below 20 o 20 30 o Above 30 o Use With 920 89908 LOW TEMP THINNER FAST 20L 920 89909 STANDARD THINNER NORMAL 20L 920 89910 HIGH TEMP THINNER SLOW 20L 440 Line PT Solid, Metallic & Pearlescent Basecoat Tinters 480 Line PT Exotica Special Effect Base Coat Tinters 920-S0027 High Solids Thinner 5L Use with existing basecoat technology. Improves coverage on poor covering basecoat colours Reduces number of coats. Thin as low as 40% Excellent for bumper bars, single panels. Excellent mottle control. 920-S0045 Ecco Thinner 20L Use with existing basecoat technology. Temp range 20 0 30 0 Turns Dulux PT basecoat Into a VOC compliant paint system. As approved by the APMF. 18

Product Name Hardener Thinner Mix Comment 485 89915 MT Flat Base 0.9L 485 89919 PR 2K Flat Base Refer to Dulux Autospeed MT 10:1 Clear 488-89917 Technical Data Sheets For mixing Add after hardener Refer to Dulux Autospeed PR Tinters 427 Line (2K Direct Gloss Tinters) Technical Data Sheets For mixing Add after hardener MT Flat Base is a gloss reducing additive. The gloss level obtained is dependent on the amount used and on the application of the clear coat. PR 2K Flat Base is gloss reducing additive for the Dulux Autospeed PR Tinters 427 Line. The gloss level obtained is dependent on the amount. 19

Product Name Hardener Thinner Mix Comment 485 89930 Flex Additive Refer to the respective TDS for addition recommendations to the various systems in the Dulux Autospeed range. Used as an additive for 2K coatings for flexible substrates such as bumper bars, spoilers, All plastic parts and surfaces that require flexibility 980 S0031 2K Accelerator 1L Add 30ml to 1L of RFU Autospeed 2K product Developed to improve the drying time of Dulux Autospeed 2K products. 20

Product Name Mix Comment 980-89790 RP HARDENER FAST 1L & 2.5L Use hardener according to size and temperature of job 488 89289 2K 2:1 HS White 4L & 20L OBSOLETED FleetShield 428-S0204 4L & 20L 980-89290 2K HARDENER Normal 0.5L & 1L & 2.5L 980-S0028 2K HARDENER Slow 1L & 2.5L 2 : 1 : 0-5% Premium quality high gloss two pack clear top coat. 2 coats Application. 5min flash between coats. Bake 30mins @ 60 C Use 485-89930 Flex Additive for Bumper Bars. <20 0 920 89819 RP THINNER FAST 20L 20 0 to 30 0 920 89292 2K THINNER NORMAL 1L + 4L + 20L >30 920 89847 2K THINNER High Temp(slow) 20L >35 0 920 89963 X Slow Thinner 4L 21

Product Name Mix Comment 488 89843 2K 2:1 Black 4L & 20L OBSOLETED FleetShield 428-89843 4L & 20L 2 : 1 : 0-5% Premium quality high gloss two pack clear top coat. 2 coats Application. 5min flash between coats. Bake 30mins @ 60 C Use 485-89930 Flex Additive for Bumper Bars. 980-89790 RP HARDENER FAST 1L & 2.5L Use hardener according to size and temperature of job 980-89290 2K HARDENER Normal 0.5L & 1L & 2.5L 980-S0028 2K HARDENER Slow 1L & 2.5L <20 0 920 89819 RP THINNER FAST 20L 20 0 to 30 0 920 89292 2K THINNER NORMAL 1L + 4L + 20L >30 920 89847 2K THINNER High Temp(slow) 20L >35 0 920 89963 X Slow Thinner 4L 22

Etch Primer Lacquer Primer 482-S2551 Etch Primer Grey Spraypak. 400G 482-S25701 Lacquer Primer Grey Spraypak. 400G Chromate free 1K etch primer. Maybe topcoated with most single and two pack products. A high build acrylic primer that can be used as a filler or surfacer. Maybe topcoated with most single and two pack products. 23

Acrylic Jet Black GMH BLACK 482-S2535 Acrylic Jet Black Spraypak. 400G 482-S2575 GMH Black Spraypak. 400G 1K Acrylic Gloss Black Aerosol 1K Acrylic GMH Black Matt Aerosol 24

Clear White 482-S2598 Lacquer Clear Spraypak. 400G 482-S2545 Acrylic White Spraypak. 400G Premium quality acrylic clear coat. It produces a high gloss flexible film with excellent durability and adhesion. Hold can upright 20-25cm From surface. Use smooth even strokes parallel to the surface. Apply light mist coats rather Than 1 heavy coat to avoid Sags and runs 25

Product Name Mix Comment Aerosol Base 482-S2525 200g Shake can 2 min Used to spray out mixed colour from The Dulux range. Approximately 100ml of Mixed colour is added to the spray pack. Older stock to be phased out 482S2530 212g. While stocks last. Hold can upright 20-25cm From surface. Use smooth even strokes parallel to the surface. Apply light mist coats rather Than 1 heavy coat to avoid Sags and runs 26

Spray Suits N5210301-unit - Small N5210302-unit Medium N5210303-unit - Large N5210304-unit X Large N5210305-unit XX Large N5210306-unit XXX Large Paint Strainers N5210312-unit Paint Strainer CTN 1000 190 micron synthetic filter mesh 27

Double & Triple Tight Plain Can & Lids N5210310 Unit 500ml DT plain lid and can N5210309 Unit 1L TT plain lid and can N5210308 Unit 2L DT plain lid and can N5210307 Unit 4L DT plain lid and can 28

This range of product contains Isocyanates and Solvents. Toxic fumes and vapours can be harmful. Always wear PPE equipment. Always refer back to Technical Data Sheets & Material Safety Data Sheets. 29

30