GEOTECHNICAL SPECIALTY SERVICES SPECIALIZED ENGINEERING SOLUTIONS FOR STRUCTURES
02/03 FES engineers provide a range of specialized geotechnical services, from design to construction and beyond, which offers clients sustainable, economic solutions tailored to meet their specific requirements.
A TEAM YOU CAN TRUST FES provides specialized geotechnical engineering and construction services to the private, commercial and public sectors. Extensive experience gained in the fields of geotechnical engineering and construction, enables FES to determine the most appropriate solution and tailor it to the client s requirements. The knowledge and expertise of its engineers, project managers, skilled and general labors ensure the company can provide solutions for structures and site improvements that can be built economically and efficiently. SPECIALTY SERVICES FES offers a wide range of specialty geotechnical services designed by FES engineers. CONTRACTING (NEW AND REPAIR) Foundation Support Retaining Walls Slopes Stabilized Vertical Cuts Ground Improvements CONSULTING AND VALUE ENGINEERING Geotechnical Design and Engineering Value Engineering Repair Solutions Certification of Construction
04/05 FOUNDATION SUPPORT REPAIR SOLUTIONS Structures are supported on shallow, site improvement, mat, or deep foundations. FES provides a complete foundation support service which includes design and construction. Alternatively FES engineers can value engineer an existing design before constructing the foundation to insure that the most economical and efficient solution is implemented. Helical Piers or Piles Push Piers FES engineers have extensive experience in developing design solutions that can be quickly and efficiently constructed. The company s specialist teams carry out repair solutions for failed structures and site improvements using the latest products and equipment. Foundations and Structural Slabs Walls Slopes and Vertical Cuts Utility and Communication Towers Micro Piles CFA Piles Grouted Piers Stone Piers Dynamic Compaction Underpinning FES uses helical piers and piles for deep foundation applications. Used to support new structures or foundation systems that have settled, shifted or failed, helical piers and piles can provide both compression and tension-bearing capacity and lateral resistance. They can also be used as anchors to provide long-term sustainable solutions. Helical piers and piles are widely utilized in a variety of sectors including utilities, solar energy and telecommunications.
RETAINING WALLS FES offers complete retaining wall solutions from design to construction. Modular/Segmental retaining walls are used to retain earth and provide a solid aesthetically pleasing vertical face. They are effective in both large-scale applications and smaller residential projects. The modular block used to build the wall allows flexibility of design, rapid construction and maximum utilization of the land area. Gravity retaining walls are constructed using natural stone or concrete and depend on their weight and setback to retain the earth. To increase their strength and allow for the construction of higher elevations these natural stone walls can be dry stacked or grouted. Cantilever and tied-back retaining walls utilize a variety of materials such as concrete, wood, steel, vinyl or a combination of these in order to support vertical cuts and earth. Higher walls may require tie-backs to increase their stability. SLOPES AND VERTICAL CUTS FES engineers design and construct new slopes and offer a variety of solutions to repair or stabilize failing or failed slopes, using helical anchors, tie backs and other engineered products. Steepened slopes are normally constructed using anchoring systems to allow for the design of long or short-term solutions. Vertical cuts can be designed by FES using soil or rock anchors and stabilized face areas which utilize wire or fabric and shotcrete. These solutions are particularly suitable for highways and deep excavations in urban areas and for sites where space is limited.
06/07 GROUND IMPROVEMENTS FES engineers and project managers have designed and constructed projects where ground improvements are required because of fills, poor soil conditions and the need to accommodate high loads. Ground improvement techniques include: Dynamic Compaction Helical Piers and Piles Grouted Piers Stone Columns Geotextile/Geogrid Undercut and Replacement CONSULTING In conjunction with contracting activities, FES offers a wide range of consulting and value engineering services. This complete solution enables FES to provide project continuity and achieve potential value engineering benefits, which can result in cost savings and efficiencies for clients. DESIGN AND ENGINEERING FES engineers have gained a wealth of experience in geotechnical design and construction over many years enabling them to create new designs and to value engineer existing schemes for foundation support, retaining walls, slopes, vertical cuts and site improvements. SHOP DRAWINGS FES can produce shop drawings for new and existing designs and submit these to the engineer of record for approval. Once approved they are used by FES project managers to carry out construction services. PERMITS FES is a licensed contractor in several states with the ability to apply for and secure construction permits prior to beginning construction. Shop drawings are utilized to apply for and secure the required permits. CERTIFICATION OF CONSTRUCTION As part of its total solution, FES provides certifications for all projects designed and constructed by FES. The company can also provide as-built drawings and data records.
Regional Headquarters: Americas 8296 Sherwick Court, Jessup, MD 20794, United States T: +1 (301) 490 8427 E: cclus@cclint.com F: +1 (301) 490 8497 8752 DESIGNED AND PRODUCED BY Grey Matter www.usegreymatter.com Europe Unit 8, Millennium Drive, Leeds, LS11 5BP, United Kingdom T: +44 (0) 113 270 1221 E: cclgb@cclint.com Gulf Detroit House Building, Flat No. 201, Motorcity, Nad Al Sheba, Dubai, United Arab Emirates T: +971 (4) 454 2342 E: cclgulf@cclint.com F: +971 (4) 454 2343 MENA/Africa Derviche Haddad Building, Zouk Mosbeh, Beirut, Lebanon T: +961 (9) 22 60 44 E: cclme@cclint.com F: +961 (9) 22 60 77 FES makes no representations or warranties as to the completeness or accuracy of the information contained within this brochure. Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use. In no event will FES be responsible for damages of any nature whatsoever resulting from the use of, or reliance upon, information contained in this document. FES accepts no liability for any errors or omissions therein. CCL.09/2015