Applicable standards in HS Rolling stock subsystem TSI (2008/232/EC) ERA 1.0 Page 1/17
Standards or other documents referred to in the rolling stock TSI ( and therefore mandatory) 4.2.2.3.3 Strength of vehicle structure Specifications EN 12663:2000 Railway applications - Structural requirements of railway vehicle bodies Longitudinal and vertical static loads of category P II 4.2.3.1 Kinematic gauge pren 50367:2006 Clause 5.2 4.2.3.3.2.3.2 Axle bearing health monitoring Functional requirements for the vehicle 4.2.3.3.2.3.6 Axle bearing health monitoring Emmissivity 4.2.3.4.1 Rolling stock dynamic behaviour General 4.2.3.4.2 Rolling stock dynamic behaviour Limit values for running safety 4.2.3.4.3 Rolling stock dynamic behaviour Track loading limit values EN 12082: 1998 Railway applications - Axle boxes Performance testing Annex 6 EN ISO 2813: 1998 Paints and varnishes Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees Clause 3.1 EN 14363: 2005 Railway applications - Testing for the acceptance of running characteristics of railway vehicles Testing of running behaviour and stationary tests Clauses 5.2.2, and annex C EN 14363: 2005 Railway applications - Testing for the acceptance of running characteristics of railway vehicles Testing of running behaviour and stationary tests Clauses 4.1.3, 5.5.1, 5.5.2, and appropriate sections of 5.3.2, 5.5.3, 5.5.4, 5.5.5 and 5.6 EN 14363: 2005 Testing for the acceptance of running characteristics of railway vehicles Testing of running behaviour and stationary tests Clauses 5.5.1, 5.5.2 and appropriate sections of clauses 5.3.2, 5.5.3, 5.5.4, 5.5.5 and 5.6 ERA 1.0 Page 2/17
4.2.3.4.7 Rolling stock dynamic behaviour Design values for wheel profiles 4.2.3.4.7 Rolling stock dynamic behaviour Design values for wheel profiles EN 13674-1: 2003 Railway applications - Track Rail Part 1: Vignole railway rails 46kg/m and above Rail section 60 E 1 pren 13715: 2006 Railway applications - Wheelsets and bogies Wheels Tread profile S1002 and GV1/40 profiles 4.2.4.3 Brake system requirements EN 50163: 2004 Railway applications - Supply voltage of traction systems Clause 4.1 4.2.5.2 Passenger information signs ISO 3864-1: 2002 4.2.6.1 Environmental conditions EN 50125-1: 1999 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs in workplaces and public areas Railway applications - Environmental conditions for equipment Part 1: Equipment on board rolling stock 4.2.6.4 Maximum pressure variations in tunnels EN 14067-5 : 2006 Railway applications - Aerodynamics Part 5: Requirements and test procedures for aerodynamics in tunnels 4.2.6.5.2 Exterior noise Limits for stationary noise 4.2.6.5.3 Exterior noise Limits for starting noise EN ISO 3095: 2005 Acoustics Measurement of noise emitted by railbound vehicles EN ISO 3095: 2005 Acoustics Measurement of noise emitted by railbound vehicles 4.2.6.5.4 Exterior noise EN ISO 3095: 2005 ERA 1.0 Page 3/17
Limits for pass-by noise 4.2.6.6.2 Electromagnetic interference EN 50121-3-1: 2000 Acoustics Measurement of noise emitted by rail bound vehicles Electromagnetic compatibility Part 3-1: Rolling stock train 4.2.6.6.2 Electromagnetic interference EN 50121-3-2: 2000 Electromagnetic compatibility Part 3-2: Apparatus 4.2.7.2.3.2 Fire extinguisher EN 3-3:1994 Portable fire extinguishers Construction, resistance to pressure, mechanical tests EN 3-6:1995 amended in 1999 Portable fire extinguishers Part 6: Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 part 1 to part 5 4.2.7.2.3.3 Fire resistance EN 1363-1: 1999 EN 3-7:2004 Portable fire extinguishers Part 7: Characteristics, performance requirements and test methods Fire resistance tests Part 1:General requirements 4.2.7.2.5 Specific measures for tanks containing flammable liquids EN ISO 2719 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2002) ISO 11014-1 Safety data sheet for chemical products -- Part 1: Content and order of sections 4.2.7.3 Protection against electric shock EN 50153: 2002 4.2.7.12 Emergency lighting system EN 13272 : 2001 Railway applications - Rolling stock Protective provisions relating to electric hazards Railway applications - Electrical lighting for rolling stock in public transport systems ERA 1.0 Page 4/17
Clause 5.3 4.2.7.13 Software EN 50128 : 2001 EN 50155 : 2001/A1 : 2002 4.2.8.3.1.1 Voltage and frequency of the electricity supply Energy supply 4.2.8.3.1.2 Voltage and frequency of the electricity supply Energy recuperation 4.2.8.3.2 Maximum power and maximum current that it is permissible to draw from the catenary EN 50163: 2004 Railway applications - Supply voltage of traction systems Clause 4 EN 50388: 2005 Railway applications - Power supply and rolling stock Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability Clauses 12.1.1 and 14.7.1 EN 50388: 2005 Railway applications - Power supply and rolling stock Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability Clauses 7 and 14.3 4.2.8.3.3 Power factor EN 50388: 2005 Railway applications - Power supply and rolling stock Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability Clauses 6 and 14.2 4.2.8.3.4.1 Harmonic characteristics and related over-voltages on the EN 50388: 2005 ERA 1.0 Page 5/17
overhead contact line Railway applications - Power supply and rolling stock Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability Clause 10 4.2.8.3.6.3 Insulation of pantograph from the vehicle EN 50163: 2004 Railway applications - Supply voltage of traction systems Clause 4 4.2.8.3.6.3 Insulation of pantograph from the vehicle EN 50124-1: 2001 Railway applications - Insulation coordination Part 1: Basic requirements Clearance and creepage distances for all electrical and electronic equipment Table A2 4.2.8.3.6.4 Pantograph lowering EN 50206-1: 1998 Railway applications - Rolling stock Pantographs: characteristics and tests Part 1: Pantographs for main line vehicles Clauses 4.8, 4.9, 6.3.2, 6.3.3 4.2.8.3.6.4 Pantograph lowering EN50119:2001 Railway applications Fixed installations Electric traction overhead contact lines Table 9 4.2.8.3.6.6 Electrical protection coordination EN 50388: 2005 Railway applications - Power supply and rolling stock Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability Clauses 11, 14.6 4.2.8.3.7.1 Overall Design (Pantograph) EN 50206-1: 1998 Railway applications - Rolling stock Pantographs: characteristics and tests Part 1: Pantographs for main line vehicles ERA 1.0 Page 6/17
Clause 4 4.2.8.3.7.2 Pantograph head geometry EN 50367: 2006 Railway applications - Current collection systems Technical criteria for the interaction between pantograph and overhead line (to achieve free access) Clause 5.2 4.2.8.3.7.3 Pantograph static contact force EN 50206-1: 1998 Railway applications - Rolling stock Pantographs: characteristics and tests Part 1: Pantographs for main line vehicles Clauses 3.3.5, 6.3.1 4.2.8.3.7.4 Working range of pantographs EN 50206-1: 1998 Railway applications - Rolling stock Pantographs: characteristics and tests Part 1: Pantographs for main line vehicles Clauses 4.2, 6.2.3 4.2.8.3.7.5 Current capacity EN 50206-1: 1998 Railway applications - Rolling stock Pantographs: characteristics and tests Part 1: Pantographs for main line vehicles Clauses 6.13. 4.2.8.3.8.1 General (Contact strip) EN 50405: 2006 Railway applications - Current collection systems Pantographs, testing methods for carbon contact strips Clauses 5.2.2 to 5.2.4 and 5.2.6 and 5.2.7 4.2.8.3.8.3 Material (Contact strip) 4.2.8.3.8.4 Detection of contact strip breakage EN 50367: 2006 Railway applications - Current collection systems Technical criteria for the interaction between pantograph and overhead line (to achieve free access) Clause 6.2 EN 50405: 2006 Railway applications - Current collection systems ERA 1.0 Page 7/17
Pantographs, testing methods for carbon contact strips Clause 5.2.5 4.2.8.3.8.5 Current capacity EN 50405: 2006 Railway applications - Current collection systems Pantographs, testing methods for carbon contact strips Clause 5.2 4.2.9.4.2 Electrical Sockets (Train interior cleaning) 7.1.4 Rolling stock being upgraded or renewed A.1.1 Detailed mechanical boundary characteristics for the static resistance CEE 7 Standard Sheet VII EN 14363: 2005 Railway applications - Testing for the acceptance of running characteristics of railway vehicles Testing of running behaviour and stationary tests Clause 5.5.5 and table 3 EN 12663: 2000 Railway applications - Structural requirements of railway vehicle bodies A.3.4 Protection against a low obstacle EN 12663: 2000 Railway applications - Structural requirements of railway vehicle bodies Clause 3.4.2 F Modules for the EC Verification of Subsystems EN/ISO 9001: 2000 Quality management systems Requirements G.5.1.1 Assessment of Characteristic Wind Curves Aerodynamic determination properties G.5.4.3 Assessment of Characteristic Wind Curves Vehicle dynamics determination EN 14067-1: 2003 Railway applications - Aerodynamics Part 1: Symbols and units EN 14363: 2005 Railway applications - Testing for the acceptance of running characteristics of railway vehicles Testing of running behaviour and stationary tests Clauses 5, 5.5 ERA 1.0 Page 8/17
G.8 Effects of Cross Winds Required Documentation H.1 Definitions (Front and rear lamps) EN 14363: 2005 Railway applications - Testing for the acceptance of running characteristics of railway vehicles Testing of running behaviour and stationary tests Clause 5.6 CIE Publication No2 15.2-1986 CIE1931 (CIE means International Commission on Illumination ) H.2 Front Lamps CIE S004/E-2001 Colours of light signals H.3 Rear Lamps CIE S004/E-2001 Colours of light signals H.4 Conformity type testing of interoperability constituents (lamps) H.4 Conformity type testing of interoperability constituents (lamps) H.4 Conformity type testing of interoperability constituents (lamps) CIE Publication No. 15.2 CIE 69:1987 Methods for characterising illuminance meters and luminance meters; performance, characteristics and specifications ISO/CIE CD 10527 CIE standard colorimetric observers (under development; stage CD = study/ballot initiated) J.1.1 J.1.1 J.1.3 Optical Distortion (Windscreens) Optical distortion (Windscreens) Haze (Windscreens) ECE R 43 A3/9.2 ISO 3538:1997 Road vehicles -- Safety glazing materials -- Test methods for optical properties Section 5.3 ECE R 43 A3/4 ERA 1.0 Page 9/17
J.1.4 J.1.4 N1 Transmittance (Windscreens) Transmittance (Windscreens) Measuring Conditions for Noise Deviations ECE R 43 A3/9.1 ISO 3568:1997 Road vehicles -- Safety glazing materials -- Test methods for optical properties Clause 5.1 EN ISO 3095: 2005 Acoustics Measurement of noise emitted by railbound vehicles (ISO/FDIS 3095:2005) N2.2 Measuring Conditions for Noise Measurement system N2.4 Measuring Conditions for Noise Test report N2.4 Measuring Conditions for Noise Test report pren ISO/IEC 17025:2000 General requirements for the competence of testing and calibration laboratories IEC 60263: 1982 Scales and sizes for plotting frequency characteristics and polar diagrams EN ISO 3740: 2000 Acoustics Determination of sound power levels of noise sources guidelines for the use of basic standards P.2.2 Rig test for determining the effects of reduced friction (Brakes) pren15328:2005 Railway applications Braking Brake pads Annexes A, B ERA 1.0 Page 10/17
Standards or other documents not referred in the rolling stock TSI (and therefore voluntary) Interoperability constituents Revised TSI sections Characteristics Relevant standards or other documents 4.2.2.2.2.2 Buffing and draw gear components 4.2.2.2.2.3 Towing coupler for recovery and rescue pren 15566:2008 Railway applications - Railway rolling stock - Draw gear and screw coupling pren 15551:2008 Railway applications - Railway rolling stock - Buffers EN 15020:2006 Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods 4.2.2.7 Wind screen EN 15152:2007 4.2.3.4.9.2 Wheels EN 13262:2004 Railway applications Front windscreen for trains cab Railway applications - Wheelsets and bogies - Wheels - Product requirements 4.2.7.4 Lights and horn: Devices EN 15153-1:2007 Railway applications - External visible and audible warning devices for high speed trains - Part 1: Head, marker and tail lamps EN 15153-2:2007 Railway applications - External visible and audible warning devices for high speed trains - Part 2: Warning horns Parameters of the rolling stock subsystem Revised TSI section Characteristics Relevant standards or other documents 4.2.2.3.3 Strength of vehicle structure. Specification EN 15227:2008 Railway applications - Crashworthiness requirements for ERA 1.0 Page 11/17
Revised TSI section Characteristics Relevant standards or other documents railway vehicle bodies pren 12663-1:2007 Structural requirements of railway vehicle bodies. Part 1 Railway vehicles other than Freight wagons pren 15663:2008 4.2.2.4.2 External access door EN 14752 Definition of vehicle reference masses Railway applications - Bodyside entrance systems 4.2.2.6 Driver s cab b External visibility 4.2.2.7 Wind screen -optical quality -ability to resist to impacts EN 15152:2007 Cab windscreens of high speed trains EN 15152:2007 Railway applications Front windscreen for trains cab 4.2.3.2 Static axle load EN 50215:1999 4.2.3.3.1 Electrical resistance EN 13260:2003 pren 15663:2008- Definition of reference vehicle masses Wheelsets and bogies - Wheelsets - Products requirements pren 15313:2008 Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance 4.2.3.3.2.2 Axle bearing health monitoring. Class2 train 4.2.3.3.2.3 Hot axle box detection for Class 2 trains 4.2.3.4.1 Rolling stock dynamic behaviour General pren 15437-1:2008 Railway applications - Axlebox condition monitoring - Performance requirements - Part 1: Track side equipment EN 12082:2007 Railway applications - Axle boxes- Performance testing EN 13103:2001 Railway applications- Wheelsets and bogies - Nonpowered axles - Design method ERA 1.0 Page 12/17
Revised TSI section Characteristics Relevant standards or other documents EN 13104:2001 Railway applications - Wheelsets and bogies - Powered axles - Design method EN13260:2003 Railway applications - Wheelsets and bogies - Wheelsets - Products requirements EN13261:2003 Railway applications - Wheelsets and bogies - Axles - Product requirements pren 15313:2008 4.2.3.4.4 Wheel/rail interface EN 13715:2006 4.2.3.4.6 Definition of equivalent conicity EN 15302:2008 4.2.3.4.9.1 Wheelsets EN 13260:2003 Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance Railway applications - Wheelsets and bogies - Wheels Wheel tread Railway applications - Method for determining the equivalent conicity Railway applications - Wheelsets and bogies - Wheelsets - Products requirements pren 15313:2008 Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance 4.2.3.4.9.2 Interoperability Constituent Wheels EN 13262:2004 Railway applications - Wheelsets and bogies - Wheels - Product requirements 4.2.3.8 Flange lubrication EN 15427 :2008 Wheel/Rail Friction Management - Flange Lubrication 4.2.3.9 Suspension coefficient EN 14363: 2005 Railway applications - Testing for the acceptance of ERA 1.0 Page 13/17
Revised TSI section Characteristics Relevant standards or other documents running characteristics of railway vehicles Testing of running behaviour and stationary tests Clauses 4.3 4.2.4.1 Minimum braking Characteristics EN 14531-1 :2005 Railway applications - Methods for calculation of stopping distances, slowing distances and immobilization braking - Part 1: General algorithms pren14531-6:2008 Methods for calculation of stopping distances, slowing distances and immobilization braking - Part 6: Step by step calculations for train sets or single vehicles 4.2.4.1.c Minimum deceleration Maximum braking distance EN50215:1999 pren 15663:2008 Definition of vehicle reference masses Trains UIC 544-1 Brakes- Braking power UIC 544-2 Brakes- Dynamic brake 4.2.4.3 Brake system requirements EN 14198 :2004 Railway applications - Braking Requirements for the brake system of trains hauled by a locomotive Trains EN 15179:2007 Railway applications - Braking- Requirements for the brake system of coaches EN 15220-1:2008 Railway applications - Brake indicators- Part 1: Pneumatically operated brake indicators EN 15355:2008 Railway applications - Braking Distributor valves and distributor isolating devices pren 15595:2008 ERA 1.0 Page 14/17
Revised TSI section Characteristics Relevant standards or other documents Braking Wheel slip prevention equipment EN 15611:2008 Railway applications - Braking- Relay valves EN 15612:2008 Railway applications - Braking- Brake pipe accelerator valve EN 15625:2008 Railway applications - Braking- Automatic variable load sensing devices 4.2.4.4 Service braking performance EN50215 :1999 (FprEN 50215:2008 under vote) 4.2.4.8 Brake requirements for rescue purposes EN 15220-1:2008 Railway applications - Brake indicators- Part 1: Pneumatically operated brake indicators EN 15355 :2008 Railway applications - Braking Distributor valves and distributor isolating devices EN 15611:2008 Railway applications - Braking- Relay valves EN 15612:2008 Railway applications -Braking- Brake pipe accelerator valve 4.2.5.3 Passenger alarm EN 15327-1 :2008 Railway applications - Passenger alarm subsystem Part 1: General requirements and passenger interface for the passenger emergency brake system 4.2.6.2 Train aerodynamic load in open air EN 14067-2:2003 Railway applications - Aerodynamics Part 2: Aerodynamics on open track EN 14067-4:2005/prA1:2008 Railway applications - Aerodynamics Part 4: Requirements and test procedures for aerodynamics on open track ERA 1.0 Page 15/17
Revised TSI section Characteristics Relevant standards or other documents 4.2.6.4 Maximum pressure variation in tunnels 4.2.6.5.4 Exterior noise Limits for pass-by noise EN 14067-3 :2003 Railway applications - Aerodynamics Part 3 : Aerodynamics in tunnels EN 14067-5 :2006 Railway applications - Aerodynamics Part 4: Requirements and test procedures for aerodynamics in tunnels EN 15461:2008 Railway applications - Characterisation of the dynamic properties of track sections for pass by noise measurements pren 15610 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation (foreseen date of availability 2009-05) 4.2.7.2 Fire safety TS 45545-1 to 4, 6&7:2008 and TS 45545-5:2005 Fire protection of railway vehicles 4.2.7.6 Interior noise EN ISO 3381: 2005 Acoustics Measurement of noise inside rail bound vehicles 4.2.7.7 Boundary characteristics linked to air conditioning EN 14813-1 :2006 Railway applications - Air conditioning for driving cabs Part 1: Comfort parameters EN 14813-2 :2006 Railway applications - Air conditioning for driving cabs Part 2: Type tests EN13129-1 :2002 Railway applications - Air conditioning for main line rolling stock Part 1: Comfort parameters EN13129-2 :2002 Railway applications - Air conditioning for main line rolling stock Part 2 : Type tests 4.2.7.8 Driver vigilance device UIC 641 Conditions to be fulfilled by automatic vigilance devices ERA 1.0 Page 16/17
Revised TSI section Characteristics Relevant standards or other documents used in international traffic 4.2.8.1 Traction and electrical equipment. Traction performance requirements pren 15663:2008 Definition of vehicle reference masses 4.2.8.3.4 Short over-voltages generated EN50124-2:2001 Railway Applications Insulation Coordination Part 2 : Overvoltages and related protections 4.2.8.3.6.8 Running through system separations EN 50119:2001 Will be superseded by revised version EN 50119:200x; voted, to be ratified in 2008-10 ERA 1.0 Page 17/17