The complete system Infusion
Infusion Systems Universal spike Vent with CODAN Check Valve Safe by experience For over 50 years, the name CODAN has stood for reliable and universally applicable infusion systems. Our innovative development and production, subject to the most stringent quality criteria, guarantees that it will stay that way in the future. Spike for semi-rigid containers and bags Drip chamber Spike for bags Level ring Fluid filter Drip chambers Full of expertise: Our drip chambers consist of precisely matched high tech components. This starts with the spikes whose differently shaped tips cleanly and safely penetrate all common infusion containers with ease and fit securely. If a vent is required, a valve-controlled vent can be selected, which protects the sterile air filter against wetting or clogging with the fluid. The vent always works whatever your needs. Two versions are available: For the standard model 20 drops per ml, for the micro drip, it is 60 drops per ml. The level indicator helps set the fluid level; the flexible and non-reflective material of the chamber ensure that the filling and reading are user-friendly both under artificial and daylight conditions. The fluid filter at the system outlet fulfils another safety function. It prevents particles larger than 15 µm from flowing through.
Tubing 3-way stopcock with Female Luer-Lock adapter Safety first: CODAN has completely ceased using the contentious plasticiser DEHP. The PVC tubing with plasticiser TOTM for gravity and pump-driven sets is used by CODAN as standard for all PVC tubing products. Transparent but still green: green line products from CODAN contain no PVC and plasticisers. They are also universally applicable. Besides the important medical aspects, there are also significant advantages in terms of environmentally-friendly disposal. 3-way stopcock with needle-free adapter needle-free Y-injection site Precision roller clamp Roller clamp Regulation rather than trial and error: With the precision roller clamp, the administration of the infusion solution is not only quicker but permanently more precise for the clinician to adjust. The end of the set can be fixed in a holder on the side during preparation. During ongoing infusion, a clamping device on the roller clamp can be used for temporary interruption. When the system is disposed of after use, the clamp housing serves as stab protection for the spike.
Adapters There is a way without needles: 3-way stopcocks, latex-free and needle-free Y-sites are used whenever an additional transfer system has to be connected or an additional medication has to be administrated. The new generation of SWAN-LOCK components are particularly safe and userfriendly, because they work according to the needle-free principle. Access can be activated with a adapter. There is therefore no risk of injury and contamination for clinician or the patient. Another advantage of the SWAN adapters: They can be disinfected and do not require an additional cap. Y-injection site Y-injection site with CODAN Check Valve FlowStop protection cap Rotating adapter Rotating adapter with CODAN Check Valve Connections It depends on the turn: All lockable connections from CODAN are designed according to the Luer-Lock standard. The connection to the catheter can be made safely and sealed in just a few easy steps. If the connectors have a rotating Luer thread, this is especially easy on the patient. With all versions including an integrated CODAN Check Valve, the backflow of infusion fluid or blood is prevented. adapter adapter with CODAN Check Valve The adapters have a FlowStop protection cap with filter. This allows air to escape in a controlled manner, but no fluids. The infusion system can therefore be vented in a simple and safe way.
Sets for infusion pumps Every drip counts: CODAN Infusion systems are ideally suited for use in volumetric infusion pumps that do not require specific or complex special sets. So comparatively inexpensive, pressure-tight standard sets can be used in pumps, such as the A707 V from CODAN ARGUS. It does not require expensive components like silicone segments or pump cartridges. There is a broad selection available: all the tubing used in pressure-tight infusion systems from CODAN, whether PVC (TOTM) or green line (PVC-free), can be used in the A707 V thereby offering flexibility in selection. Of course, we also offer infusion systems equipped with our patented Anti-Free-Flow clamp. These products are specifically for use in the A708 V infusion pump from CODAN ARGUS. The clamp automatically closes the flow when the pump door is opened or the set is removed from the pump which prevents Free-Flow. The IVIP 708 infusion systems are available in various configurations and also with the various tubing materials. Both the A707 V and A708 V volumetric infusion pumps from CODAN ARGUS not only work with high precision, they are also valued by virtue of their easy operation and safe use. Safety first: The Anti-Free-Flow system of the CODAN ARGUS 708 V. The patented Anti-Free- Flow clamp on IVIP 708 sets automatically blocks the flow of fluid on opening the pump door and removal of the set from the pump.
CODAN Worldwide CODAN is internationally known as a manufacturer and supplier of disposable medical administration systems. The CODAN Companies worldwide employ more than 1,500 people. The name CODAN represents reliability, quality and precision supported by the knowledge and experience of more than 50 years of research and development. Our worldwide production facilities and sales organisations deliver first class service to all our customers in the healthcare sector. CODAN Companies CODAN Medizinische Geräte GmbH & Co KG Deutschland CODAN pvb Critical Care GmbH Deutschland CODAN pvb Medical GmbH Deutschland CODAN PORTUGAL, S.A. Portugal CODAN 11, S.A. Portugal CODAN US Corporation California USA CODAN Inc. California USA CODAN NORGE AS Norge CODAN TRIPLUS AB Sverige CODAN Limited Great Britain CODAN FRANCE Sarl France CODAN Medical AG Schweiz CODAN ARGUS AG Schweiz CODAN BV Nederland CODAN s.r.l. Italia CODAN Medical GmbH Österreich CODAN Steritex ApS Danmark CODAN Medical ApS Danmark CODAN DEHA ApS Danmark CODAN Product range Infusion sets Transfusion sets Extension lines and Manifold connectors I.V. accessories I.V. filters and filter systems Neonatology/Paediatric products Withdrawal, preparation and administration sets CODAN CYTO Chemoprotect products CODAN ENTERAL Syringes Invasive bloodpressure monitoring systems I.V. pumps Continence care products Other CODAN Sets Compliance of the established quality management systems with the provisions of EN ISO 13485 and the European Directive 93/42/EEC was certified by the competent notified bodies. Thus we are entitled to mark our products with: TÜV Product Service CODAN Medizinische Geräte GmbH & Co KG D-23738 Lensahn Presafe Denmark A/S CODAN Steritex ApS DK-3060 Espergærde Presafe Denmark A/S CODAN Medical ApS DK-4970 Rødby TÜV Product Service CODAN pvb Critical Care GmbH D-85661 Forstinning CODAN Medizinische Geräte GmbH & Co KG Stig Husted-Andersen Straße 11 D-23738 Lensahn Tel. +49 (0) 43 63 51 11 Fax +49 (0) 43 63 51 12 14 www.codan.de The decisive connection