CONTENTS Butt-Welding Fittings... Inspection Procedure... Wall Thickness Schedules... Butt-Welding Fittings Weight and Volume... 9 Long and Short Radius Elbows... Straight and Reducing Tees... Concentric and Eccentric Reducers... Caps... 7 Stainless Steel Lap Joint Stub Ends... Material Specification for Butt-Welding Fittings... 9
Butt-Welding Fittings Wrought Steel Butt-Welding Fittings (Carbon and Alloy Steel) Elbow (Long) Cap 90 Elbow (Long) 0 Elbow (Long) T (Straight) Reducer (Concentric) 90 Elbow (Short) 0 Elbow (Short) T (Reducing) Reducer (Eccentric) Large Diameter Wrought Steel Butt-Welding Fittings (Carbon, Alloy and Stainless Steel) Elbow (Long) 90 Elbow (Long) T (Straight) Reducer (Concentric) Cap 90 Elbow (Short) T (Reducing) Reducer (Eccentric)
Stainless Steel Butt-Welding Fittings Elbow (Long) Cap 90 Elbow (Long) T (Straight) Reducer (Concentric) Lap Joint Stub End 90 Elbow (Short) T (Reducing) Reducer (Eccentric) Items Material Carbon and Alloy Steel Stainless Steel Coating Making Rust-resistant paint (black) Die stamping Passivity treatment Electrolysis etching
Inspection Procedures butt-welding fittings are subjected to strict in-process inspection at each stage of the production process - from starting materials handling to finished product shipping. They are visually examined for conformity to company specifications and tested under the applicable ASTM, ASME, MSS and JIS codes and standards. They are also tested to make sure they conform to their intended use. Upon request, we call in officially certified test agents to witness the inspection procedures. butt-welding fittings are manufactured in conformity with the following standards. APPLICABLE STANDARDS ASTM A Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperatures Service ASTM A0 Wrought Austenitic Stainless Steel Piping Fittings ASTM A Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service ASME B.9 F actory-made Wrought Steel Butt-Welding Fittings ASME B. Wrought Steel Buttwelding Short Radius Elbows and Returns MSS SP- Wrought Stainless Steel Butt-Welding Fittings MSS SP-7 High Test Wrought Butt Welding Fittings JIS B9 Butt-Welding Pipe Fittings for Light Gauge Stainless Steel Tubes for Ordinary Use JIS B Steel Butt-Welding Pipe Fittings for Ordinary Use JIS B Steel Butt-Welding Pipe Fittings JIS B Steel Plate Butt-Welding Pipe Fittings JIS B Steel Socket-Welding Pipe Fittings JIS B Aluminum and Aluminum Alloy Butt-Welding Pipe Fittings STARTING MATERIAL RECEIVING INSPECTION butt-welding fittings are made of materials which meet ASTM and intracompany specifications. Starting material inspection is carried out as follows: ) Dimensional Inspection Dimensions are inspected at each end of the purchased material. ) Visual Inspection Inspection is performed according to BENKAN's "acceptable surface condition" standard. ) Collating Judgement is made as to whether it is worthy of the inspection by computorised collating the described items with the materials certificates. The following other inspections are performed if necessary. Ultrasonic Examination Magnetic Particle Examination Radiographic Examination Liquid Penetrant Examination Ultrasonic Thickness Inspection Mechanical Test Others IN-PROCESS INSPECTION butt-welding fittings are manufactured with carefully selected materials of the finest metallurgical quality on well-controlled jigs, tools or molds based on BENKAN's various working standards. Meeting quality specifications is a key feature of butt-welding fittings. The following are the major in-process inspection items. Visual Inspection Dimensional Inspection Shape Inspection Hardness Test Temperature Check Processing Conditions Check Material Identification (by marking) Others FINAL INSPECTION The final inspection of butt-welding fittings is performed as follows: ) Standard Product Inspection Applicable for butt-welding fittings produced under ASME B.9, B. and other specifications. VISUAL INSPECTION butt-welding fittings are visually inspected to confirm that both internal and external surfaces are smooth and without harmful defects. BENKAN's "acceptable surface condition" standard is used as the standard for visual tests.
DIMENSIONAL INSPECTION butt-welding fittings are inspected for conformity with ASME or MSS dimensional tolerances (see table on page -7). ) Special Product Inspection Applicable for every products manufactured to meet specifications requested by customers. VISUAL INSPECTION butt-welding fittings are visually inspected. Criteria are based on those of the standard product. Special specifications are determined by agreement between the customer and BENKAN. DIMENSIONAL INSPECTION The inspection is usually based on specifications stipulated by the customer. SPECIAL INSPECTION In the case of "special requirements" specified by the customer, nondestructive examinations and mechanical tests are performed. ) Inspection Certificates BENKAN certificates are issued in the following form unless otherwise requested by the customer. INSPECTION BY VARIOUS AUTHORITIES ) Inspection by a Bureau of Shipping Products subject to this inspection are made from starting materials stipulated by the regulations of the bureau. The starting materials and products are inspected for appearance, dimensions, and conformity to designated specifications. The Bureau of Shipping witnesses and certifies inspection, and certificates from them are forwarded to the customer. butt-welding fittings are inspected by the following Bureaus of Shipping: ABS (ABS PACIFIC DIVISION) B.V (Bureau Veritas) LRS (Lloyd's Register ASIA) NK (Nippon Kaiji Kyokai) DNV (Det Norske Veritas) ) Inspection by Other Organizations JIC (Japan Inspection Co.,Ltd.) SGS (SGS FAR EAST LTD.) MOODY INTERNATIONAL LTD.
Wall Thickness Schedules (ASME) Outside Wall Thickness Diameter A B SchS SchS Sch0S Sch0S Sch Sch Sch Sch /.7...0..9 / 7......9 /.....7... /.7...9.9..........9 -/....9...0 0 -/...7.... 0...9.... -/..0. 7.0..0. 0..0. 7...0. 90 -/..0.7...0. 0...0.0...0..... 9... 0... 7..0.. 0...... 7.0 0.. 9.... 7. 0.0. 9..0... 0.0. 9..0. 7.9 9. 00.. 9... 7.9 9. 0.. 9... 7.9. 00.. 9... 9. 0.... 9. 00.. 9... 9.. 0 7.9 700 7.9.9 70. 7.9. 7.9.9 00 7.9.9 0 7.9.9 900 9. 7.9.9 90 9. 00 0.0 0. 0 7. 0. 9. * Figures are converted from inch to mm (inch=.mm)
ASME B. ASME B.9 Wall Thickness STD Sch0 Sch0 XS Sch0 Sch0 Sch Sch0 Sch0 XXS...0.0.......7.7. 7..9.9.9.9. 7...... 9....9.9. 9.7.7.7.. 7...9.9...7... 7.0 7.0 9..0.. 7. 7....7.7...0.0.... 7... 9. 9..9 9. 7. 7..0.0...9.......0. 9. 9....... 9... 7...... 9... 9.. 7...7 9..7...0. 0. 9.. 9.. 9..9 9.7. 9...... 0.0 9....9. 7..0 9. 7...0.9.0. 9. 9. 9. 9. 9. 7. 9. 7. 9. 9. 9. 9. 9. 9. 9. 9. (mm) A B / / / / -/ 0 -/ 0 -/ 0 90 -/ 0 0 0 0 0 0 00 0 00 0 00 0 700 70 00 0 900 90 00 0 0 0 0
Wall Thickness Schedules (JIS) Outside Wall Thickness Diameter A B SchS SchS SchS FSGP LG Sch Sch Sch /....0. / 7....0. /.7.... / 7......0...0. -/.7...0. 0 -/....0. 0 0...... -/ 7...0... 0 9...0.0.. 90 -/..0.0.. 0...0.0..9 9....0.. 0....0.0.0. 7 7 90.7. 0...0.... 7.0 9.. 0 7...0.... 7. 0..0...9.9.. 0.0.0.0 7.9 7.9. 7.9 9. 00..0.0 7.9 7.9. 7.9 9. 0..0.0 7.9 7.9. 7.9. 00.0. 9. 7.9 7.9. 9. 0.0. 9. 7.9. 9. 00.. 9. 7.9. 9.. 0..0 7.9 7.9 700..0 7.9 7.9.9 70..0 7.9 7.9.9 00.0 7.9 7.9.9 0.0 7.9 7.9.9 900 9..0 7.9 7.9.9 90 9. 7.9 00 0.0 9.. 7.9 0. 7.9 0 7. 7.9 0. 7.9 9. 7.9 *: No standard in JIS. However, needs by customer, it is applied from ASME B.. 7
Wall Thickness JIS G JIS G JIS G JIS G JIS G9 JIS G0 JIS G STD Sch0 Sch0 XS Sch0 Sch0 Sch Sch0 Sch0 XXS A B *... *.0.0 / *... *.. / *... *.7.7.7 *7. / *.9.9. *.9.9. *7. / *...9 *... *9. *... *.9.9. *9.7 -/ *.7.7. *.. 7. *. 0 -/ *.9.9.9 *...7 *. 0 *...0 *7.0 7.0 9. *.0 -/ *... *7. 7.. *. 0 *.7.7 7.0 *.. 90 -/ *.0.0 7. *.... *7. 0 *... *9. 9..9 *9.0 *7. 7. 9. *.0.0.. *.9 0 7 7 *... *....0 *. 0 9 *9. 9. *..... *. 0 *9... * 7..... *. 0 9... 9.0. 7...7 0 9..7...9. 0. 00 9.. 9.0. 9..9 9.7. 0 9...... 0.0 00 9..9...9. 7..0 0 9. 7...0.9.0. 9. 00 9..9..0. 9... 0 9. 700 9. 70 9. 00 9. 0 9. 900 9. 90 9. 00 0 9. 0 9. 0 9. 0 9. (mm)
9 / / -/ -/ -/ -/ 0 STD XS 90 LONG WEIGHT (Kg) 0.0 0. 0. 0. 0.7 0...0....... 7.9 9.0.9 9.7 9..7 7.0 7.. 0. 0.. 0.7.9.0.9 7.7. 0. 0. 0.9 0. 0.9 0.9.70.7.9. 9...9.7 9.9 9.9.0 9...0....9 79..7 07. 77. 7. 9.0 9. 99.,0. 0. 0.7 0. 0. 0.7....7.7.... 9. 7. 9....0.. 0.0 7.. 7.0.7. 0. 0. 0. 0.9....7..... 9.9 7. 99.9.7 0.0 7... 0. 9.. 0. 0.0.7 0.9 7.9 0.0 0. 0. 0. 0.0 0.7.7..7..0 9.7..9....9.. 9. 7. 9.. 0. 9..0 9... 7... 0. 0. 0. 0. 0.0.9.9..9.7 9..7 7..7. 70.9 7.7. 7. 7.....9.7 9. 0.9 9.... 9. 77.9 0.0 0.0 0. 0. 0.7 0. 0.0 0. 0.9.7.9.9. 9.7..9.0...7.0 0..0.9. 7..7 9....9.7. 0.0 0.07 0. 0.9 0. 0. 0. 0.9...77..0. 7.7..7...7 0. 7. 7.. 9. 0.0 9... 7..9 7.7 9.0 0.0 0. 0. 0. 0.7 0.70 0.9...0..7 9..7..9 7.7... 9. 9...0... 0.0 7... 97. 0.07 0. 0. 0. 0.0 0.9..77.....0...0 0.0 7.7. 90.9.7. 7. 7. 7. 7.9. 9..0..9 BUTT-WELDING FITTINGS WEIGHT AND VOLUME STD XS 90 SHORT STD XS TEE STD XS CAP STD XS REDUCER * Weight and volume are according to theoretical calculation. * Figures of tees are on equal tees and figures of reducers are on one size reduction reducers.
90 LONG VOLUME (m ) 0.00 0.00 0.00 0.00 0.00 0.0 0.0 0.07 0.070 0. 0. 0. 0.9 0.79 0. 0..0...9..79...0...7 0.00 0.00 0.00 0.00 0.00 0.007 0.0 0.0 0.0 0.079 0.9 0. 0. 0.9 0. 0. 0.700 0.7.07...9.7.0.9.9.79.07 0.00 0.00 0.00 0.00 0.00 0.007 0.0 0.0 0.00 0.07 0.09 0. 0.79 0. 0.7 0. 0.0 0.9 0.00 0.97.70.9.9.9.0.00.7. 0.00 0.00 0.00 0.00 0.00 0.009 0.0 0.0 0.09 0.0 0.09 0.0 0.0 0.0 0. 0. 0. 0.0 0. 0. 0. 0. 0. 0. 0.9 0.00 0.00 0.00 0.00 0.00 0.00 0.007 0.0 0.0 0.0 0.09 0.00 0. 0.9 0.9 0. 0. 0. 0.0 0. 0. 0. 0.9 0.9 0.7 0.97.07 / / -/ -/ -/ -/ 0 90 SHORT TEE CAP REDUCER
Long and Short Radius Elbows Pipe Size Outside Diameter OD Center-to-End ASME B.9 B. *BENKAN's Standards (mm) Long Radius Elbow 90 Deg. A Deg. B Short Radius Elbow 90 Deg. A Deg.* B / / -/ -/ -/ -/ 0 * * * 0* * 7* 0*..7... 9. 9..0. 7.. 9.. 7...0 7...0 7. 7. 9.. 90....0.. 9. 990...0 9. 9. 7. 7..0 00. 7. 7.. 7...0. 7..7 9...... 0. 7.. 79. 9. 7.0. 90...0. 7..9.0. 9.9 0.7. 99.9.0 9. 7.9 79.0.. 9.9.... 0.. 7.0..0. * * * * * 9.* 9.*.0*.* 7.* 9.*. 7..0.0........ 7.. 9.... 7. 9...7 7.7 7. 99...9.9 0.0 7....7
Pipe Size Long and Short Radius Return Elbows Outside Diameter OD Long Radius ASME B.9 ASME B. (mm) Center-to- Center Back-to- Face O K / / -/ -/ -/ -/..7... 9.. 90...7..0 7. 0.. 9.9..... 9..9. 7. 0.. 7.0 77...0....0.0 0..7 9.7. 9.9. 90.7 Short Radius Center-to- Center Back-to- Face O K
Straight and Reducing Tees MSS SP-7 ASME B.9 *BENKAN's Standards (mm) Outside Diameter OD Run Outlet Center-to-End Run C Outlet ()() M Outside Diameter OD Run Outlet Center-to-End Run C Outlet ()() M / x / / / / x / / / x / / -/ x -/ / / -/ x -/ -/ / / x -/ -/ / /* -/ x -/ -/ -/ x -/ -/ -/ * -/ x -/ -/ -/ x -/ -/ -/ -/* *..7.. 7..7.7. 7..7..7..7..7..... 7. 7...9 9........ 7. 7. 7. 7. 7. 7. 7. 7. 7.. 0. 7. 0.. 9.9.. 7..9. 7. 9.9 9. 9.9. 79.. 9. 9..9 x -/ -/ -/* x -/ -/ * x -/ * x x x x x............. 7......0.7 77..9.0 79...9.0 7....0..7.7.0 7.0.0.7 77.....9. 9. 90...0...9.9 79. 9.7 7.0 7.7... 9.. 7..7.9... 7. 9. Note () Outlet dimension "M" for NPS and larger is recommended but not required. Note () Outlet dimension "M" for run sizes NPS and larger is recommended but not required.
Straight and Reducing Tees MSS SP-7 ASME B.9 *BENKAN's Standards (mm) Outside Diameter OD Run Outlet Center-to-End Run C Outlet ()() M Outside Diameter OD Run Outlet Center-to-End Run C Outlet ()() M x x x x x x.0 9.. 9..7.0..9..9 9. 9.7.0.0 7..... 9. 9.7.0 9.. 9.9.....7.7 9.. 9.9 7....7 9... x x x x x 9. 9. 9. 9. 9. 9.9.0 7. 7. 0. 9.9. 7. 7...7.0. 9.9 9.9. 7.. 7. 7.7.0.. 9.9. 7. 9.. 7. 7.7 7.7.0. 9.9
Straight and Reducing Tees MSS SP-7 ASME B.9 *BENKAN's Standards (mm) Outside Diameter OD Run Outlet Center-to-End Run C Outlet ()() M Outside Diameter OD Run Outlet Center-to-End Run C Outlet ()() M 0 x 0 x 0 x 0 x 0.0. 7...0 9. 9...0 9. 9. 7...0 9. 9.. 7...0 9. 9. 79. 0.9 79. 79. 7. 7.9 9. 7. 7. 7.7.0. 9. 9. 7.7.0 79. 7. 7.9 7.9 9. 9. 9... 00. 00. 77. 77.7 79. 79. 7. 7. x * x 0 x * * * 0* x * * * * 0* * * x * * * * 0* * * 0 x 0* * * * 0* * * x *. 9.. 7...0 7. 9.. 7...0 9. 9.. 9. 7..0 7.. 9. 7..0.. 9. 7..0.0.. 9..0 7. 0.9 9.0 9. 0.. 7. 9. 7. 7.9 7.9 7.9... 77. 77. 77. 7. 7. 9. 9. 9. 77. 77. 9. 9..0 9. 9..
Concentric and Eccentric Reducers / x / / x / / -/ x / / -/ x -/ / / x -/ -/ / -/ x -/ -/ x -/ -/ -/ -/ x -/ -/ -/ x -/ -/ -/ x -/ -/ x -/ -/ x -/ Outside Diameter Large Small End End OD OD.7.... 7..7..7..7..7...... End-to- End H 0. 0.. 7.0 9.7 x x x x x x x x x x x x Outside Diameter Large Small End End OD OD...... End-to- End H 77....0 x x x 0 x x 0 x 0 x 0 x 0 MSS SP-7 ASME B.9 *BENKAN's Standards (mm) Outside Diameter Large Small End End OD OD 9. 9. 9..0 9. 9...0 9. 9. 7...0 9. 9.. 7...0 9. 9.. 7...0 End-to- End H Note () The shape of Reducer sizes " and larger may be manufactured to conical type without the tangent. () " and larger can be manufactured. Please contact us for size capability.
Caps MSS SP-7 ASME B.9 (mm) Pipe Size / / -/ -/ Outside Diameter OD..7 Length () E.. Limiting Wall Thickness for Length E..... Length () E.. Pipe Size Outside Diameter OD Length E.7.7.7.7.7 -/ -/. 0.... 7. 7.... 0.. 0 9. 9..0. 7..7....9.. 7.0 9.7.9 7.0 77.. 9..9.9. 77....0 90....0.0.7. Specifications for wall thicknesses of ". These are BENKAN Standards as no Internationally Recognized Standards have been set for such large size wall thickness. () The shape of these caps shall be ellipsoidal and shall conform to the shape requirements as given in the ASME Boiler and Pressure Vessel Code. () Length E applies for thickness not exceeding that given in column "Limiting wall Thickness for Length E". () Length E applies for thickness greater than that given in column "Limiting wall Thickness" for NPS and smaller. For NPS and larger, Length E shall be by agreement between manufacturer and purchaser. () " and larger can be manufactured. Please contact us for size capability. 7
Stainless Steel Lap Joint Stub Ends ASME B.9 MSS SP- (mm) NPS Outside Diameter / / -/ -/ -/ -/..7... Outside Diameter of Barrel min max..9.. 7. 9. 7.. 0.. 0. 7.. 7... 0.. 07..0 0....0. 9.9. 7. 9..0.7. 7.. 77..0 9.9.0.0..9.7....0.0...... 0. 0. 0. 0. 0.... 7.0.0.0.0.. 7.9 7.9 9.7 9.7.. Length F ASME (Long) ASME (Short)&MSS Radius of Fillet R Diameter of Lap G ASME & MSS Type A 0. 0. 0. 0. 0. 0. 0. 0. 0. 0............ MSS Type B..9 0.. 7. 9.9. 7.0 9.7 7..7.9 9.7.9.0. 9.9.. 9.
Material Specification for Butt-Welding Fittings ASTM A/AM Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service Grade and Marking Symbol WPB, WPC, WP, WP CL, WP CL, WP CL, WP CL, WP CL, WP CL, WP CL, WP CL, WP CL, WP9 CL, WP9 CL, WPR, WP9, WP9, WP9 ASTM A/AM Standard Specification for Piping Fittings of Wrought Carbon and Alloy Steel for Low-Temperature Service WPL, WPL9, WPL, WPL Grade and Marking Symbol ASTM A0/A0M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings Grade and Marking Symbol WPXM-9, WP, WPL, WPH, WPL, WP9, WPS, WPS, WP, WPL, WPH, WPN, WPLN, WP7, WP7L, WPS7, WP7, WP, WPH, WPS, WPS, WP7, WP7H, WP, WPH, WPS ASTM A/AM Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Grade and Marking Symbol (extract) Ferritic/Austenitic Stainless Steel WPS, WPS, WPS70, WPS90, WPS70, WPS97, WPS0 WPS 9
ASTM A0/A0M Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings Grade and Marking Symbol WPHY, WPHY, WPHY, WPHY0, WPHY, WPHY70 ASTM B Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings Grade and Marking Symbol (extract) WPN, WPNL, WPNC, WPHX, WPHG, WPHC, WPHG, WPHC, WPNC, WPNCMC, WPHG, WPCB, WPNIC, WPNIC, WPNIC, WPNICMC, WP90L, WPHB, WPHC7, WPHB- MSS SP-7 Standard Specification for High-Test, Wrought, Butt-Welding Fittings Grade and Marking Symbol WPHY-, WPHY-, WPHY-, WPHY-, WPHY-0, WPHY-, WPHY-70
TOKYO OFFICE HEAD OFFICE -, -chome, Sanno, Ota-ku, Tokyo, -7, Japan T e l: --777- Fax: --777-7 -, Rokusengoku-cho, Ota-city, Gunma, 79-, Japan T e l: -77-7- Fax: -77-7-0