JÄSPI - Solar Powered Equipment

JÄSPI - Solar Powered Equipment

JÄSPI SOLAR ECONOMY JÄSPI SOLAR ECONOMY is designed to provide the most user-friendly and costeffective solar power solution. The system is perfectly suitable to be combined with both new and used diesel, gas, or pellet boilers, as well as to provide hot water in houses that use direct electrical heating, e.g. in combination with an existing Tehowatti water heater or electric boiler. The Economy's tank is made of acid-resistant stainless steel and is 290 l in volume. It can be connected e.g. with a diesel or gas boiler. You will only require automatic solar charging equipment and solar panels additionally. JÄSPI SOLAR ECONOMY РАК supply includes: - Solar Economy water heater - 3 panels (З х 1.9 m 2 ) = 5.7 m 2 - Solar charge pack (incl. automatic equipment, pump, sensors, and charging valve) - Sensor and sensor connections for panels - Connecting pipes and mounting kit for panels - Set of fasteners for roof mounting (indicate your roofing type in the order - tile/tin or felt) - 18 l expansion tank - 20 l heat medium - Automatic deaeration - 6 bar safety valve - 40 m, Ø 18 mm pipe insulation РАК supply Solar Economy JÄSPI SOLAR ECONOMY TECHNICAL DATA Volume 290 l Weight 100 kg Design pressure 10 bar LVI-No. 5260096 PARTS: 1. Ø22 to solar panels 2. Ø22 return from solar panels 3. Ø18 system cold water 4. Ø18 domestic hot water outlet 5. Ø18 charging pump inlet 6. Cleanout / tubular electric heater flange 7. Solar coil 8. Removable front bottom plate 9. Removable side bottom plates 10. Adjustable legs (20 to 40 mm) OPTIONAL: 3 kw tubular electric heater pack (when higher capacities are ordered) We reserve the right to modify design and dimensions

JÄSPI SOLAR ECONOMY РАК with a diesel/gas boiler JÄSPI SOLAR ECONOMY РАК with a water heater e.g. in electrically heated houses JÄSPI SOLAR ECONOMY РАК with a TEHOWATTI electric heater JÄSPI SOLAR 300 РАК (e.g. in new houses that use direct electrical heating if available space is not sufficient for Economy РАК) Solar-powered heat storage (most of Jäspi batteries have solar-powered coil connections) Solar 3 / Solar 5 solar panel system The solar panel system includes 3 or 5 solar panels, automatic chargers, necessary fasteners for roof mounting (tile/tin/felt), heat medium, and expansion tank. The system additionally requires a solar-powered coil. Solar-powered system connection examples Not to be used as detailed installation layouts. Solar 3 panel pack LVI-No. 5290200 Solar 5 panel pack LVI-No. 5290201

JÄSPI SOLAR 300 JÄSPI SOLAR 300 is a water heater designed to provide effective use of solar power by private houses and cottages. The JÄSPI SOLAR 300 includes a tank made of acid-resistant ferrite stainless steel and high-quality heat insulation of cast polyurethane. A solar coil provides effective heat transfer from solar panels to domestic water. The JÄSPI SOLAR 300 features two tubular electric heaters 3 kw each. The solar tubular electric heater located on top of the water heater ensures sufficient heat (min. 60 С) and thereby prevents bacteria from possible formation. The standard lower heater is used to heat domestic water in winter when solar radiation is low. The JÄSPI SOLAR 300 can be charged by nearly all factory-made solar panels available in the market. Suitable total area of panels is 4 to 6 m 2. The JÄSPI SOLAR 300 water heater can be also complete with РАК supply (see on page 2). JÄSPI SOLAR 300 TECHNICAL DATA Volume 290 l Weight 105 kg Design pressure 10 bar LVI-No. 5260097 PARTS: KV Ø22 cold water from the system LV Ø22 domestic hot water outlet АР Ø22 return from solar panels AL Ø22 to solar panels 1. Removable front bottom plate 2. Removable side bottom plates 3. Acid-resistant steel inner pipe 4. Mixing/safety valve block 5. Electric plug 6. 3 kw winter/lower tubular electric heater 7. 3 kw summer/upper tubular electric heater 8. Solar coil 9. Adjustable legs (20 to 40 mm) 10. Lower tubular electric heater control board - temperature limiter - main switch - heating indicator lamp - control thermostat 11. Upper tubular electric heater control board - temperature limiter - main switch - heating indicator lamp - control thermostat 12. Upper sensor pocket for automatic charger equipment 13. Lower sensor pocket for automatic charger equipment We reserve the right to modify design and dimensions

JÄSPI Solar Powered Equipment With the cost of all kinds of utilities constantly growing, effective use of solar power is becoming increasingly popular in both domestic hot water production and house heating. Solar applications can be used practically free of charge (the automatic charging pump is the only component requiring some electricity). Solar power also benefits from being environmentally clean and friendly. In the northwest of Russia, for example, solar power can be used efficiently nine months a year on the average. The highest efficiency can be achieved by using solar power in hot water production, exceeding a half of yearly consumption. Should solar power alone be not sufficient to produce hot water, it can be effectively used as a pre-heat system. Solar power is an excellent solution for both new projects and houses under reconstruction. Employing JÄSPI's solar-powered heating solutions saves you operating expenses for a heating system and reduces environmental impact. Solar power Another kind of energy Average domestic hot water demand Month A wide range of JÄSPI solar systems includes various solutions to connect solar power to an existing heating system or a new house: Jäspi Solar Economy is an ideal choice for houses under reconstruction. It can be connected to an existing Jäspi gas, diesel, pellet, combined, or electric boiler. Jäspi Solar Economy is also perfectly suitable to be connected to an installed Tehowatti water heater or heating system. Jäspi Solar 300 can be employed in both new projects and houses under reconstruction for domestic hot water production. Jäspi Solar Economy РАК and Jäspi Solar 300 РАК include automatic charging equipment, solar panels, panel connecting pipes, sensor connections, and roof mounting kits. Jäspi Solar 3 and Solar 5 are solar panel packs to be connected e.g. to existing heat storages installed in combination with solid fuel boilers. They are also suitable for various heating hybrid solutions such as earth heat and electricity. A heat storage, when used, is to be additionally fitted with a solar and hot water pre-heat coil. For batteries exceeding 700 l, the Solar 5 panel pack is recommended.

JÄSPI MAKES HEAT HEAT TECHNOLOGY PL 21, Tuotekatu 11, 21201 RAISIO Tel. +358 2 4374600, Fax +358 2 4374650 www.kaukora.fi kaukora@kaukora.fi