Wireless Security System

Wireless Security System 2GIG-CNTRL2 Z-Wave Home Services Operation & User s Guide

The Go!Control Security System Congratulations on your ownership of an Go!Control Security System! This wireless system offers protection for your property against burglary, protection for yourself and family with 24-hour emergency monitoring, and optionally fire and carbon monoxide detection for your home. With the system s built-in Z-Wave home automation capability, you can control your Z-Wave enabled household lights and appliances from the Control Panel or from a portable Z-Wave remote controller. An exciting feature of the Go!Control Security System is the capability to remotely control your Z-Wave network of devices from your own computer using a Web browser over the Internet. This provides you with home automation control from anywhere in the world... even through your Web enabled cell phone or PDA! (Web remote control is an optional feature, check with your security professional for availability with your system.)

Home Control Network Overview The Z-Wave Network............... 2 Home Services Access Home Services Button.............. 3 Device Management................ 3 Toolbox........................... 3 Network Setup Adding Devices.................... 4 Naming Devices.................... 5 Basic Operation Binary Switches.................... 6 Multi-level Switches................ 7 Viewing Thermostats............... 8 Controlling Thermostats............. 9 Setting the Mode................. 9 Setting the Temperature........... 9 Setting the Fan Mode.............. 9 Scenes & Rules Controlling Multiple Devices........ 10 Creating Scenes.................. 10 Z-Wave Switches................ 10 Z-Wave Thermostats............. 10 Editing Scenes.................... 11 Changing a Device s Action....... 11 Removing a Device s Action....... 11 Renaming a Scene............... 11 Running Scenes................... 12 Deleting Scenes................... 12 Triggering Devices from Events..... 13 Creating Rules.................... 13 Editing Rules...................... 14 Changing a Rule s Action.......... 14 Deleting Rules.................... 14 Network Maintenance Removing Devices................. 15 Network Diagnostics.............. 16 Checking the Network............ 16 Table of Contents Advanced Setup Advanced Toolbox................. 17 Learn Controller................. 17 Reset Controller................. 17 View Controllers................. 18 View All Devices................. 18 Rediscover Network.............. 19 Index.............................. 20 Important Information Limited Warranty.................. 21 FCC Regulatory Information......... 21 IC Regulatory Information.......... 21 Radio Compatibility................ 21 1

Home Control Network Overview The Z-Wave Network Z-Wave is interoperable, two-way RF mesh networking technology. In plain English, Z-Wave allows you to remotely control Z-Wave enabled devices in your home. Z-Wave is a registered trademark of Zensys Inc. and/or its subsidiaries. Z-Wave enabled devices are remote control modules that lights or appliances plug into or accessories with built-in Z-Wave capabilities that are designed to work with all other Z-Wave enabled devices in a home control network. Each module can act as a wireless repeater that extends the range of the system and insures that commands intended for another device in the network are received. The wireless range of Z-Wave devices have a standard, open-air, line-of-sight distance of 65 feet. The actual performance in a home will depend on the type on construction, amount of metal between devices, and the number of Z-Wave devices that are repeating the wireless signals. Beyond simple controlling of a single device, multiple device control commands can be assigned using a Scene. A Scene can be run on its own, or Rules can be assigned to trigger a Scene after a Control Panel event such as arming your system or when an alarm occurs. The Go!Control Security System s Z-Wave Home Services has been designed to operate with Z-Wave certified binary (on/off) switches, multi-level (dimmer) switches, thermostats, and portable controllers available from a variety of equipment manufacturers. CONTROL PANEL NETWORK SIGNALS TRAVEL BETWEEN THE CONTROL PANEL AND Z-WAVE DEVICES Z-WAVE THERMOSTAT WIRELESS NETWORK SIGNALS NETWORK SIGNALS ALSO TRAVEL DIRECTLY BETWEEN Z-WAVE DEVICES Z-WAVE SWITCHES THE Z-WAVE NETWORK AUTOMATICALLY ADJUSTS THE NETWORK SIGNAL PATHS DEPENDING ON SIGNAL CONDITIONS 2 Typical Z-Wave Network

Home Services Button Home Services are accessed through the system s Home Screen. The Home Screen shows the system status with icons to indicate system conditions. It also displays the time and date. The Home Screen displays the SECURITY and HOME SERVICES buttons. The Home Screen is normally displayed when the system is disarmed. If it is not currently being displayed, pressing the button on the Control Panel will display the Home Screen. Home Services Access The Home Screen Home Services button Device Management Setup and control of Z-Wave devices is accessed by pressing the HOME SERVICES button and using the Manage Z-Wave Devices Screen. This screen displays buttons for Switches, Thermostats, Rules, Scenes, and access to the Z-Wave toolbox (Some Home Services buttons may or may not display depending on options selected by your Installer). The SWITCHES button will display the currently included binary and multi-level switches. The THERMOSTATS button will display the currently included thermostat devices. The RULES button (if enabled) will display the currently programmed Rules that run Scenes after events. The SCENES button will display currently programmed Scenes that run device actions. The TOOLBOX button allows access to the Z-Wave toolbox for setup of devices (requires entry of the Master User Code). Toolbox Z-Wave setup is performed using the Toolbox. Access the Toolbox using the following steps. 1. From the Manage Z-Wave Devices Screen, press the TOOLBOX button. 2. Enter the Master User Code. Only the Master User Code (or the Installer Code) can be used to access the Z-Wave Toolbox. NOTE: Some Z-Wave display screens will time-out after 30 seconds of inactivity and the system will return to the Home Screen. Manage Z-Wave Devices Screen Master Code Entry Screen Z-Wave Toolbox Screen 3

Network Setup Adding Devices Before a device will work in the home control network, it must be added (also called included) into the network. To add one or more switch or thermostat devices into the network, use the following steps: 1. Install the Z-Wave Device as directed by the device s instructions. If it is a lamp or appliance module, connect the lamp or load to the module and be sure the power switch on the lamp or load is ON. 2. From the Toolbox Screen, press the ADD DEVICES button. The Control Panel will display Discovering devices and wait for a signal from a device. 3. Press and quickly release the program button on the device. (This button may also be called bind, learn, or may not be labeled.) 4. When the device is discovered, the display will show its kind, type, manufacturer, and network node information assigned to the device. 5. Repeat Steps 3 and 4 for any additional devices that need to be added to the network at this time. 6. Press BACK when finished. If additional Z-Wave compatible devices are purchased, and your home control network expands, these steps can be used at any time to add additional devices. Devices can only be included once in the network. The system will not allow a device to be added multiple times to the same network. Add Z-Wave Devices Screen PRESS Z-WAVE DEVICE BUTTON Pressing the Device s Programming Button New device shows on screen Added Devices Shown 4

Naming Devices Devices in the home control network can be named to make it easy to identify the individual lamp or appliance being controlled. The custom name will show on the Control Panel s display. To name each installed switch or thermostat device, use the following steps: 1. From the Manage Z-Wave Devices Screen, press the SWITCHES or THERMOSTATS button. 2. A list of installed devices will display. If there are more than three devices, use the or arrows to scroll the list. 3. Press the display where the device is listed to display the current switch settings for the device. 4. Press the RENAME button to display the alphanumeric keyboard used to name the device. 5. Use the alphanumeric keyboard to assign a name (up to 40 characters) to the device. Use the arrow key to shift to capital letters. Use the arrow key to shift to lower case letters. Press the 0-9 key to access numeric and symbol characters. Press the a-z key to access alphabetic characters. Use the DEL key to delete characters to the right of the cursor or delete highlighted text. Use the BKSP key to delete characters to the right of the cursor. Use the or arrows to move the cursor along the text. 6. Press OK when you are finished naming the device. 7. Press BACK. 8. Repeat Steps 2 through 7 to name additional devices. 9. Press BACK when fi nished. Network Setup Manage Z-Wave Devices Screen Push device button to rename Installed Devices Shown Switch Settings Display Push RENAME button to rename device Thermostat Settings Display Push RENAME button to rename device Alphanumeric Keyboard Display 5

Basic Operation Binary Switches Binary switch modules can be turned ON or OFF. They cannot be set to in-between levels as multi-level (dimmer) switch modules can. To control a binary switch module, use the following steps: 1. From the Home Screen press the HOME SERVICES button. 2. From the Manage Z-Wave Devices Screen, press the SWITCHES button. 3. A list of all installed switches will be displayed. If there are more than three switches, use the or arrows to scroll the list. On the right side of the switch button, binary switches will display the current status of the switch (OFF or ON). NOTE: If the light or load is controlled at the module while the Control Panel is showing this display, press the REFRESH button to update the display. 4. Press the display where the device is listed to display the control buttons for the switch. 5. A check box indicates if the switch is OFF or ON. Press the desired action for the switch (OFF or ON). The lamp or load connected to the selected binary switch module will follow your command. 6. Press the BACK button three times or the button on the Control Panel to exit Home Services. Manage Z-Wave Devices Screen Press device button Press SWITCHES button Installed Switches Shown Check box for On or Off Binary Switch Settings Display 6

Basic Operation Multi-level Switches Multi-level (dimmer) switch modules can be turned ON, OFF, or set to 12 different dimming levels. To control a multi-level switch module, use the following steps: 1. From the Home Screen press the HOME SERVICES button. 2. From the Manage Z-Wave Devices Screen, press the SWITCHES button. 3. A list of all installed switches will be displayed. If there are more than three switches, use the or arrows to scroll the list. On the right side of the switch button, multi-level switches will display the current status of the switch (OFF or bars showing the dimming level). NOTE: If the light is controlled at the module while the Control Panel is showing this display, press the REFRESH button to update the display. 4. Press the display where the device is listed to display the control buttons for the switch. 5. A check box indicates if the switch is OFF or ON. If the switch is ON, the dimming level with a number 1-12 will be shown below the check boxes. Press the desired action for the switch; OFF, ON, or adjust the dimming level using the brightness buttons at each end of the dimming level display. The lamp connected to the selected multi-level switch module will follow your command. 6. Press the BACK button three times or the button on the Control Panel to exit Home Services. Press SWITCHES button Manage Z-Wave Devices Screen Press device button Installed Switches Shown Set device Off or On Choose dimmer level Multi-level Switch Settings Display 7

Basic Operation Viewing Thermostats Z-Wave compatible thermostats can be controlled using the Home Services feature. NOTE: Several types of Z-Wave compatible thermostats are available. Each type provides different features. The Control Panel s Home Services Z-Wave control will adjust to the thermostat model type, but may not support all of the thermostat s features. To view the thermostat control, use the following steps: 1. From the Home Screen press the HOME SERVICES button. 2. From the Manage Z-Wave Devices Screen, press the THERMOSTATS button. 3. A list of all installed thermostats will be displayed. If there are more than three thermostats, use the or arrows to scroll the list. On the bottom line of the thermostat button, the fan status, current mode, and current room temperature will be displayed. NOTE: If the controls at a thermostat are adjusted while the Control Panel is showing this display, press the REFRESH button to update the display. 4. Press the display where the thermostat is listed to display the control buttons for the thermostat. 5. The display shows the current temperature, the thermostat setpoint, the thermostat mode, and the fan mode (if supported). NOTE: Thermostats can be powered by the HVAC system s 24-volt AC power source (called a C-wire or common wire system) or be independently powered by batteries. To save power, battery powered thermostats send signals to the Control Panel at intervals and may not update the Control Panel s display for a short period of time. Manage Z-Wave Devices Screen Current setpoint Press THERMOSTATS button Press thermostat s device button Thermostats Screen Current temperature Current mode Thermostat Settings Screen 8

Controlling Thermostats To adjust a thermostat s settings, use the following steps. NOTE: Several types of Z-Wave compatible thermostats are available. Each type will display different supported options. Setting the Mode 1. Use the or arrows on each side of the mode display to choose between OFF, HEAT, COOL, ENERGY SAVE HEAT, or ENERGY SAVE COOL modes. 2. The thermostat will immediately switch to the mode selected. Setting the Temperature 1. Each thermostat mode (except OFF) can be set to a temperature setpoint. Use the or arrows to choose a temperature setpoint for the current mode displayed. 2. The temperature setpoint is immediately transmitted to the thermostat. Setting the Fan Mode If the thermostat supports Z-Wave fan control, the fan mode selector will be displayed. 1. Use the or arrows on each side of the fan mode display to choose between MANUAL, AUTO, MANUAL HIGH, MANUAL LOW, AUTO HIGH, or AUTO LOW (NOTE: Only modes supported by the thermostat will be displayed). 2. The thermostat will set the system s fan to the selected mode. Manual modes are displayed in yellow to indicate that the fan will remain on and will not be automatically controlled by the heating or cooling system. Basic Operation Thermostat Settings Screen Use arrows to select setpoint Selecting a Mode Selecting a Setpoint Use arrows to select mode Use arrows to select fan mode Selecting the Fan Mode 9

Scenes & Rules Controlling Multiple Devices Beyond simple controlling of a single device, multiple device control commands can be assigned using a Scene. A Scene can be run on its own, or Rules can be assigned to trigger a Scene after a Control Panel event such as arming your system or when an alarm occurs. Creating Scenes Scenes are created by assigning one or more device actions to the Scene. The multi-function Scene can then be easily executed by pressing the Scene s RUN button. To create a Scene, use the following steps: 1. From the Home Screen press the HOME SERVICES button. 2. From the Manage Z-Wave Devices Screen, press the SCENES button. 3. From the Z-Wave Scenes Screen press the ADD SCENE button. 4. Use the alphanumeric keypad displayed to enter a name for the new Scene. Press OK when finished. 5. Press the ADD button. 6. Press Z-WAVE SWITCH or Z-WAVE THERMOSTAT to add one of these device types as an action to the Scene. Z-Wave Switches 7A. Use the or arrows to choose a switch device (if there is more than one device), then select an ON, OFF, or a dimming level for the switch. Press OK. Z-Wave Thermostats 7B. Use the or arrows to choose a thermostat device (if there is more than one device), then select a mode, setpoint, and fan setting for the thermostat. Press OK. NOTE: The device will not activate while setting Steps 7A & 7B. The scene must be run or triggered by an event with a rule. 8. The assigned action(s) for the Scene will be displayed. Repeat Steps 5 through 7 to add additional actions to the Scene. Press BACK when finished. NOTE: Only one action per device can be assigned per Scene. 9. Test the Scene by pressing RUN. A Scene execution confi rmation screen will be displayed, press OK. 10 Press a device type for the action Create Action Screen Choose setpoints and modes New Thermostat Action Screen New Scene with Actions Screen Press RUN button to run the scene Press ADD SCENE button Z-Wave Scenes Screen Choose a device, then set the action New Switch Action Screen Scenes Screen with RUN Button

Editing Scenes Scenes can be edited to change a device s action, remove a device s action, or rename the Scene. To edit a Scene, use the following steps. Changing a Device s Action 1. From the Home Screen press the HOME SERVICES button. 2. From the Manage Z-Wave Devices Screen, press the SCENES button. 3. A list of programmed Scenes will be displayed. Press the name of the Scene to edit. 4. Press the desired device s button to select it. 5. Change the confi guration for the device and press OK, then press BACK. 6. Test the Scene by pressing the RUN button. A Scene execution confirmation screen will be displayed, press OK. Removing a Device s Action 1. From the Home Screen press the HOME SERVICES button. 2. From the Manage Z-Wave Devices Screen, press the SCENES button. 3. A list of programmed Scenes will be displayed. Press the name of the Scene to edit. 4. Press the desired device s button to select it. 5. Press DELETE ACTION. A confirmation screen will be displayed, press DELETE ACTION to confi rm, or CANCEL to quit without deleting. Renaming a Scene 1. From the Home Screen press the HOME SERVICES button. 2. From the Manage Z-Wave Devices Screen, press the SCENES button. 3. A list of programmed Scenes will be displayed. Press the name of the Scene to rename. 4. Press RENAME. Use the alphanumeric keypad displayed to rename the Scene. 5. Press OK to confi rm the name change or CANCEL to quit. Scenes & Rules Press scene button Scenes Screen with RUN Button Scene Action Screen Delete Actions Screen Press RENAME button Scene Action Screen Press action to edit Press DELETE ACTION button 11

Scenes & Rules Running Scenes Scenes can be run by hand manually, or be automatically run when triggered by a Rule. To run a Scene manually, use the following steps: 1. From the Home Screen press the HOME SERVICES button. 2. From the Manage Z-Wave Devices Screen, press the SCENES button. 3. A list of programmed Scenes will be displayed. 4. Press the RUN button next to the desired Scene. 5. A Scene execution confi rmation screen will be displayed, press OK. Deleting Scenes Scenes can be deleted individually. NOTE: Deleting a Scene will also delete any Rule associated with the Scene. To delete a Scene, use the following steps. 1. From the Home Screen press the HOME SERVICES button. 2. From the Manage Z-Wave Devices Screen, press the SCENES button. 3. A list of programmed Scenes will be displayed. Press the name of the Scene to delete. 4. Press DELETE. A confi rmation screen will be displayed, press DELETE SCENE to confirm, or CANCEL to quit without deleting. 5. A Scene Deleted confi rmation screen will be displayed, press OK. Press ADD SCENE button RUN Button on Scenes Screen Scene Executed Screen Delete scene button Scene Action Screen Press to confirm Scene Delete Confirmation Screen 12 Scene Deleted Screen

Triggering Devices from Events A Scene can be run on its own, or Rules can be assigned to trigger a Scene after a Control Panel event such as arming your system or when an alarm occurs. Creating Rules Rules are created by assigning a Scene to run for an event that occurs. To create a Rule, use the following steps: 1. From the Home Screen press the HOME SERVICES button. 2. From the Manage Z-Wave Devices Screen, press the RULES button. 3. From the Event Rules Screen press the ADD RULE button. 4. Use the or arrows to choose a system event to trigger the Scene. The events available are: System Armed Away System Armed Stay System Disarmed Exit Delay Started Entry Delay Started Fire or CO Alarm Alarm Audible Alarm Auxiliary Alarm Non-response Zone Opened Non-response Zone Closed 5. Use the or arrows to choose a Scene to run when the selected event occurs. 6. Press OK to create the Rule or CANCEL to quit. 7. Repeat Steps 3 through 6 to create additional Rules, or press BACK to quit. Scenes & Rules Press RULES button Manage Z-Wave Devices Screen Press ADD RULE button Add Event Rules Screen New Event Rules Screen Use arrows to select an event to trigger the scene Selecting an Event Use arrows to select a scene that the event triggers Selecting a Scene New rule Event Rules Screen Showing New Rule 13

Scenes & Rules Editing Rules Rules can be edited to change an event that triggers the Rule or to change the Scene that the Rule runs. Changing a Rule s Action To change a Rule s action, use the following steps: 1. From the Home Screen press the HOME SERVICES button. 2. From the Manage Z-Wave Devices Screen, press the RULES button. 3. A list of programmed Rules will be displayed. Press the name of the Rule to edit. 4. Use the or arrows to choose a system event to trigger the Scene. The events available are: System Armed Away System Armed Stay System Disarmed Exit Delay Started Entry Delay Started Fire or CO Alarm Alarm Audible Alarm Auxiliary Alarm Non-response Zone Opened Non-response Zone Closed 5. Use the or arrows to choose a Scene to run when the selected event occurs (the scene can also be edited here by pressing the Run this Scene button). 6. Press OK to change the Rule or CANCEL to quit. Deleting Rules Rules can be deleted individually. To delete a Rule, use the following steps: 1. From the Home Screen press the HOME SERVICES button. 2. From the Manage Z-Wave Devices Screen, press the RULES button. 3. A list of programmed Rules will be displayed. Press the name of the Rule to delete. 4. Press DELETE RULE. A confi rmation screen will be displayed, press DELETE RULE to confirm, or CANCEL to quit without deleting. 5. A Rule Deleted confi rmation screen will be displayed, press OK. Manage Z-Wave Devices Screen Push rule button to edit Event Rules Screen Press rules button Use arrows to select a different event to trigger the scene Editing the Selected Event Use arrows to select a different scene that the event triggers Editing the Selected Scene Push to delete a rule 14 Deleting a Rule

Removing Devices When a device will no longer be used in the home control network, it should be removed (also called excluded) from the network so the system will not try to communicate with the missing device. To remove one or more devices from the network, use the following steps: 1. From the Toolbox Screen, press the REMOVE DEVICES button. The Control Panel will display Discovering devices and wait for a signal from a device. 2. Press and release the program button on the device. (This button may also be called bind, learn, or may not be labeled.) 3. When the device is discovered, the display will show A device has been removed from the network.... 4. Repeat Steps 2 and 3 for any additional devices that need to be removed from the network at this time. 5. Press BACK when fi nished. These steps can be used at any time to remove devices from the home control network. Network Maintenance Remove Z-Wave Devices Screen PRESS Z-WAVE DEVICE BUTTON Pressing the Device s Programming Button Removed device indication Removed Devices Display 15

Network Maintenance Network Diagnostics The Home Services Z-Wave network periodically checks to determine if a network device has become un-plugged, has failed, or is missing. The network can also be checked manually by pressing the CHECK NETWORK button on the Home Services Toolbox screen. If there is a network issue, the HOME SERVICES button on the Home Screen will display as orange instead of blue. The TOOLBOX button and the CHECK NETWORK button will also display as orange instead of blue if there is a network issue. Use the following steps to correct a network issue. 1. Press the orange HOME SERVICES button. The Manage Home Automation screen will be displayed. 2. The Z-Wave logo will be displayed, along with the trouble alert icon. The trouble alert icon displays a number in the upper right corner that is the number of devices the network has detected trouble with. 3. Press the trouble alert icon to display the device(s) the network has detected trouble with. 4. Go to the displayed devices location(s) and inspect for un-plugged or missing devices. Either correct the devices installation, or remove the device from the network using the following steps. Press BACK to exit without making any changes. 5. To remove a failed device, press the device s button on the Failed Devices Screen. Press REMOVE FAILED DEVICE. A confirmation screen will be displayed, press OK. Checking the Network The Z-Wave network can be checked manually using the CHECK NETWORK button. Use the following steps: 1. From the Z-Wave toolbox, press the CHECK NETWORK button. 2. Wait while the system checks the network. THIS MAY TAKE SEVERAL MINUTES. 3. Any new or failed network nodes will be displayed. Home Services button turns orange Home Screen with Orange Button Z-Wave trouble icon Trouble Alert Screen Push device button to remove Delete Failed Devices Screen Device Removed Confirmation Screen 16 Checking Network Screen

Advanced Toolbox The Advanced Toolbox is used to add a secondary controller, reset and view installed controllers, view the currently installed network devices, or rediscover the network devices. On the Z-Wave Toolbox Screen, press ADVANCED TOOLBOX to access the Advanced Toolbox functions. Learn Controller The Control Panel can be added to an existing Z-Wave network as a secondary controller. When the Control Panel acts as a secondary controller, devices will only be able to be added and removed by the primary controller. Other than that, all functions are available to either controller. Use the following steps to add the Control Panel as a secondary controller: 1. From the Advanced Toolbox Screen, press the LEARN CONTROLLER button. The Control Panel will display Learning Z-Wave Controller and wait for a signal from the primary controller. 2. Press and release the include button on the primary controller. (This button may also be called bind, learn, or may not be labeled.) 3. A confi rmation screen will be displayed, press OK. Reset Controller Resetting the controller will remove all Z-Wave devices from the network and controller. The network node information will also be reset. Reset the controller only after removing all the devices one at a time using the REMOVE DEVICES button. Use the following steps to reset the controller: 1. From the Advanced Toolbox Screen, press the RESET CONTROLLER button. 2. A reset confi rmation screen will be displayed, press RESET Z-WAVE CONTROLLER to continue or CANCEL to exit. 3. A completion confirmation screen will be displayed, press OK. To re-build the Z-Wave network, use the Add Devices function. Advanced Setup Advanced Z-Wave Toolbox Learn Controller Screen Reset Controller Screen 17

Advanced Setup Advanced Toolbox (cont.) View Controllers The Control Panel can display each Z-Wave controller programmed into the network. Use the following steps to display the controllers. 1. From the Advanced Toolbox Screen, press the VIEW CONTROLLERS button. 2. Each programmed controller will be displayed. Use the or arrows to scroll the display if more than three controllers are listed. The controller listings will show the controller s name, manufacturer, and network node number. 3. Press BACK to quit. View All Devices Use the following steps to display all the devices programmed into the network. 1. From the Advanced Toolbox Screen, press the VIEW ALL DEVICES button. 2. Each programmed device will be displayed. Use the or arrows to scroll the display if more than three devices are listed. The controller listings will show the device s name, type/id number, manufacturer, and network node number. 3. Press BACK to quit. View Controllers Screen Z-Wave Devices Screen 18

Advanced Toolbox (cont.) Rediscover Network During normal operation the network decides the best path to route signals from one device to another. If devices are moved to different positions in the installation, it is recommended to rediscover the network so the routing path will be re-configured. Use the following steps to rediscover the network: 1. From the Advanced Toolbox Screen, press the REDISCOVER NETWORK button. The Control Panel will display Rediscovering Z-Wave devices. 2. The system will pause, then return to the Advanced Toolbox. Advanced Setup Rediscovering Network Screen 19

Index A B C D E F H I L M N O Adding devices 4 ADD RULE button 13 ADD SCENES button 10 Advanced setup 17, 18, 19 Advanced toolbox 17, 18, 19 ADVANCED TOOLBOX button 17 Basic operation 6, 7, 8, 9 Binary switches 2, 6 Changing a devices action 11 Changing a rules action 14 Checking the network 16 CHECK NETWORK button 16 Controlling multiple devices 10 Controlling thermostats 9 Creating rules 13 Creating scenes 10 DELETE ACTION button 11 DELETE RULE button 14 DELETE SCENE button 12 Deleting rules 14 Deleting scenes 12 Device management 3 Editing rules 14 Editing scenes 11 Event 2 20 FCC regulatory information 21 Home Services button 3 IC regulatory information 21 Learn Controller 17 LEARN CONTROLLER button 17 Limited warranty 21 Multi-level switches 2, 7 Naming devices 5 Network diagnostics 16 Network maintenance 15, 16 Network setup 4, 5 Orange buttons 16 R S T U V W Z Radio compatibility 21 Rediscover network 19 REDISCOVER NETWORK button 19 Refresh button 6 REFRESH button 7, 8 REMOVE DEVICES button 15, 17 REMOVE FAILED DEVICE button 16 Removing a device s action 11 Removing devices 15 RENAME button 5, 11 Repeater 2 Reset controller 17 RESET CONTROLLER button 17 RESET Z-WAVE CONTROLLER button 17 Rules 2, 10, 13 RULES button 3, 13, 14 RUN button 10, 11, 12 Running scenes 12 Scene 2, 10, 13 Scenes and rules 10, 11, 12, 13, 14 SCENES button 3, 10, 11, 12 Screen timeout 3 Secondary controller 17 Setpoint 9 Switches button 6 SWITCHES button 3, 7 Thermostat fan mode 9 Thermostat mode 9 THERMOSTATS button 3, 8 Thermostat setpoint 8 Thermostat temperature 9 Toolbox 3 TOOLBOX button 3 Triggering devices from events 13 Trouble alert icon 16 Un-plugged device 16 View all devices 18 VIEW ALL DEVICES button 18 View controllers 18 VIEW CONTROLLERS button 18 Viewing thermostats 8 Warranty service 21 Z-Wave devices 2 Z-Wave network 2 Z-Wave switches 10 Z-Wave thermostats 10 Z-Wave wireless range 2

Important Information Limited Warranty This 2gig Technologies Inc. product is warranted against defects in material and workmanship for twelve (12) months. This warranty extends only to wholesale customers who buy through 2gig Technologies Inc. authorized distribution channels. 2gig Technologies Inc. does not warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer s warranty, if any. There are no obligations or liabilities on the part of 2gig Technologies Inc. for consequential damages arising out of or in connection with use or performance of this product or other indirect damages with respect to loss of property, revenue, or profit, or cost of removal, installation, or reinstallation. All implied warranties, including implied warranties for merchantability and implied warranties for fi tness, are valid only until the warranty expires. This 2gig Technologies Inc. Warranty is in lieu of all other warranties express or implied. For warranty service call your local alarm installation and service professional at the contact information shown on the back cover of this User s Guide. FCC Regulatory Information This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer s instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance with Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Relocate the Console away from the TV/radio receiver. Plug the Console into a different wall outlet so that the Console is on a different branch circuit. Re-orient the TV/radio antenna. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. IC Regulatory Information This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Cet appareillage numérique de la classe B répond a toutes les exigences de l interferérence canadienne causant des règlements d équipment. L opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l interférence nocive, et (2) ce dispositif doit accepter n importe quelle interférence reçue, y compris l interférence qui peut causer l opération peu désirée. WARNING: Changes or modifications to this receiver not expressly approved by 2gig Technologies Inc. could void the user s authority to operate this equipment. Radio Compatibility Z-Wave home control networks are designed to work properly alongside 802.11 wireless computer networks, Bluetooth and other 2.4 GHz or 5.8 GHz devices. Some baby cams, wireless video devices and older cordless phones using the 900 MHz frequency range may cause interference and limit the Z-Wave functionality. 21

YOUR LOCAL ALARM INSTALLATION AND SERVICE PROFESSIONAL: Copyright 2010 230786 A