2.5 IDE / SATA / SATA+USB FLASH DISK 2.5 SATA IDE 2.5 SATA+USB FEATURES: IDE : o Industry ATAPI-5 Standard Compliant. o Max Capacity supported: 32GByte. o Optional designs for vertical type and horizontal type o High reliability assured based on the internal ECC (Error Correcting Code) function. o Reliable wear-leveling algorithm to ensure the best of flash endurance. o Auto Standby and Sleep Mode supported. o Automatic Recognition and Initialization of flash devices. o Excellent performance supporting Ultra DMA Mode 4. o Capacity supported: 128MB, 256MB, 512MB, 1GB, 2GB, 4GB, 8GB, 16GB and 32GB. SATA : o Serial ATA 1.0a Specification compliant. o SATA 7+15 pins combo connector. o Low Power Consumption. o Optional designs for 2.5 inch and 1.8 inch.
o o o o High reliability assured based on the internal Error Correcting Code function. Reliable wear-leveling algorithm to ensure the best of flash endurance. Excellent performance supporting Ultra DMA Mode. Capacity supported: 128MB, 256MB, 512MB, 1GB, 2GB, 4GB, 8GB, 16GB and 32GB (unformatted). SATA + USB: o Fully compatible with devices and OS that support the SATAⅡ 3.0Gbps standard o Supports BCH ECC 8 bits or 15bits in 512 bytes. o Max Capacity supported: 256GByte. o Integrated 1-port USB2.0, 1-port SATA II and 8-channel Flash controller. o Reliable wear-leveling algorithm to ensure the best of flash endurance. o Auto Standby and Sleep Mode supported. o Supports dynamic power management. o Capacity supported: 32GB 64GB 128GB and 256GB(unformatted). SPECIFICATION: IDE : Compatibility ATAPI-5 Standard Flash Technology NAND Type Flash Memory Base Form Factor 2.5 inch or 1.8 inch Connector Types Standard 44pin male IDE connector System Performance Data Transfer Mode UDMA Mode Sequential Read Max up to 29Mbytes / sec Sequential Write Max up to 19Mbytes / sec Average Access Time 1ms Environmental Specification Standard Temperature Operation 0 ~ +70 Non-operation -20 ~ +80 Wide Temperature Operation -40 ~ +85 Non-operation -50 ~ +95 Vibration Humidity
Shock Reliability MTBF > 2,000,000 hours Error Code Correction 4 bits ECC Code Endurance Greater than 1,000,000 cycles logically contributed by Wear-leveling and advanced bad sector management algorithms Data Reliability < 1 non-recoverable error 10 14 bits read Data Retention 10 years Power Consumption Power Voltage +5V ± 10% Read 85mA (Typ.) Write 90mA (Typ.) Standby Mode 2mA (Typ.) SATA : Compatibility Serial ATA 1.0a Specification Flash Technology NAND Type SLC Flash Memory Base Form Factor 2.5 inch or 1.8 inch Connector Types Standard 7+15-pin male Serial ATA connector System Performance Data Transfer Mode UDMA Mode Sequential Read Max up to 30Mbytes / sec Sequential Write Max up to 20Mbytes / sec Average Access Time 1ms Environmental Specification Standard Temperature Operation 0 ~ +70 Non-operation -20 ~ +80 Wide Temperature Operation -40 ~ +85 Non-operation -50 ~ +95 Vibration Humidity Shock Reliability MTBF > 2,000,000 hours Error Code Correction 4 bits ECC Code
Endurance Greater than 2,000,000 cycles logically contributed by Wear-leveling and advanced bad sector management algorithms Data Reliability < 1 non-recoverable error 10 14 bits read Data Retention 10 years Power Consumption Power Voltage +5V ± 10% Read 190 ma (Typ.) Write 220 ma (Typ.) Standby Mode 130 ma (Typ.) SATA + USB : Compatibility Serial ATA 2.0 Specification Flash Technology NAND Type Flash Memory Base Form Factor Horizontal Type in Rightwards Connector Types Standard 7+15 pins female Serial ATA connector Standard Mini 5-pin female USB connector System Performance Data Transfer Mode Serial ATA Mini USB Sequential Read SLC Type 170 Mbytes/sec Max. 30 Mbytes/sec Max. MLC Type 145 Mbytes/sec Max. 30 Mbytes/sec Max. Sequential Write SLC Type 140 Mbytes/sec Max. 25 Mbytes/sec Max. MLC Type 90 Mbytes/sec Max. 25 Mbytes/sec Max. Access Time 0.2ms Environmental Specification Standard Temperature Operation 0 ~ +70 Non-operation -20 ~ +80 Wide Temperature Operation -40 ~ +85 Non-operation -50 ~ +95 Vibration Humidity Shock Reliability MTBF > 2,000,000 hours Error Correction Code BCH 8 can correct up to 8 random error bits within 512 data bytes Endurance (SLC) Greater than 1,000,000 cycles logically contributed by Wear-leveling and advanced bad sector management algorithms Endurance (MLC) Greater than 10,000 cycles logically contributed by Wear-leveling and advanced bad sector management
Data Reliability < 1 non-recoverable error 10 14 bits read Data Retention 10 years Power Consumption Power Voltage +5V ± 10% Read 550mA Write 500mA Sleep Mode 210mA ORDERING INFORMATION: IDE Flash Disk: 2.5-inch Form Factor Product Model Name: Capacity Standard Temperature ( 0 ~ +70 ) Wide Temperature ( -40 ~ +85 ) 128MB IFD-25SU128MBPCF IFD-25SU128MBPIF 256MB IFD-25SU256MBPCF IFD-25SU256MBPIF 512MB IFD-25SU512MBPCF IFD-25SU512MBPIF 1GB IFD-25SU001GBPCF IFD-25SU001GBPIF 2GB IFD-25SU002GBPCF IFD-25SU002GBPIF 4GB IFD-25SU004GBPCF IFD-25SU004GBPIF 8GB IFD-25SU008GBPCF IFD-25SU008GBPIF SATA Flash Disk: 2.5-inch Form Factor Product Model Name: Capacity Standard Temperature ( 0 ~ +70 ) Wide Temperature ( -40 ~ +85 ) 128MB SFD-25SU128MBPCF SFD-25SU128MBPIF 256MB SFD-25SU256MBPCF SFD-25SU256MBPIF 512MB SFD-25SU512MBPCF SFD-25SU512MBPIF 1GB SFD-25SU001GBPCF SFD-25SU001GBPIF 2GB SFD-25SU002GBPCF SFD-25SU002GBPIF 4GB SFD-25SU004GBPCF SFD-25SU004GBPIF 8GB SFD-25SU008GBPCF SFD-25SU008GBPIF 16GB SFD-25SU016GBPCF SFD-25SU016GBPIF 32GB SFD-25SU032GBPCF SFD-25SU032GBPIF
SATA + USB Flash Disk : 2.5-inch Form Factor Product Model Name: Capacity Standard Temperature ( 0 ~ +70 ) 32GB SUD-25JM32GBCFX 1 64GB SUD-25JM64GBCFX 1 128GB SUD-25JM128GBCFX 1 256GB SUD-25JM256GBCFX 1