Sulzer Chemtech Structured Packings for Distillation, Absorption and Reactive Distillation 699 25
Structured packings for separation and reactive distillation This brochure was reviewed and provides a complete, up-to-date overview of packings available from Sulzer Chemtech. Also included is a summary covering the essential column internals and our technical services. load our brochures as well as design tools, please refer to www.sulzerchemtech.com you will find in the following brochures: - Internals for Packed Columns The brochure contains a comprehensive summary of the selection of internals supplied by Sulzer Chemtech, and a description of the most important features of the distributor technology. - Gas Processing - Chemical Processing Industry - Process Technology and and Crude Oil Production Three brochures which illustrate the wide spectrum of application of structured packings. Sulcol Design Program A program that enables users to carry out hydraulic design of columns featuring every type of packing Sulzer Chemtech offers. The program is based on our experience with several thousand industrial columns and from experimental data measured in our own test column with a diameter of m. Considering the broad selection of products and widely proven application know-how, Sulzer Chemtech is in a position to offer the suitable solution even for the Contents Structured packings -2 8 9 Internals and erection Test facilities 693 254-4 Column design 2
5 years of experience in mass transfer technology Sulzer Chemtech has been active as equipment supplier to the chemical activities laid the corner stone for sustained innovation by establishing an in-house development group and a well equipped pilot facility. Gauze packings The invention of the gauze packings BX and CY in the early sixties resulted in a decisive breakthrough in distillation technology. The special advantages of these packings to be accomplished for the very substances to be separated by means of distillation. rison to conventional technology, in many process applications. of columns, originally equipped with trays or random packings, have order to improve yield or purity or to test data gathered in our process engineering laboratory as well as experience gained in numerous industrial applications, we are able to offer the best possible solution for your application requirements. Column Internals With the concept of advanced internals, Sulzer Chemtech has and liquid distribution in packed for a wide range of applications and operating conditions. 63 256 678 257 Mellapak A further milestone was the development of the structured packings conceived to cover the moderate vacuum range up to atmospheric and unforeseen perspectives in all areas of thermal mass transfer. Applications The eighties were marked by the widening of the application range oil and gas industries as well as in exhaust air cleaning and in the strippping of volatile constituents from wastewater. Typical examples high-pressure absorption columns 693 255 4588 33 MellapakPlus novel, high capacity structured more capacity compared with conventional structured packing) lower range of technical and commercial advantages low vacuum up to high pressure applications
Structured packings from Sulzer Chemtech Type of packing from plastics from plastics Material Stainless steels Carbon steel Hastelloy, monel, aluminum, copper-bronze, brass, titanium, nickel Stainless steels Carbon steel Hastelloy, monel, aluminum, copper-bronze, brass, titanium, nickel, Stainless steels Carbon steel BX gauze packing CY gauze packing BX gauze packing from plastics Stainless steels Copper-bronze, monel, hastelloy, nickel, titanium Stainless steel, carbon steel, Hastelloy, copper, aluminium, titan, niobium from sheet metal Alloy C22 Stainless steels
Applications Diameter and operation range Characteristics Basic chemicals and petrochemicals, natural gas drying Basic chemicals and petrochemicals, natural gas drying (depending on type) 2 m 2 h (depending on type) 2 m 2 h Universal packing type, suitable for a wide range of applications Universal packing type Boosts useful capacity (depending on type) max. o C, o C Small made from metal Crude oil distillation Quench columns Smooth surface caustic solutions optimum: - mbar material) Temperature max. 8 o C Temperatures up to more o C Self-wetting, even with aqueous solutions even with small liquid loads High separation performance Best chemical resistance and thermal stability Alcohols, esters, fatty acids and derivatives Solvent recovery streamlined lamellas Unique distribution effect for the liquid and good Constant separation performance independent of vapor load Smallest hydraulic diameter stages per meter, low Acetates, methyl acetate hydrolysis, fatty acid esters Acetals trickle-bed reactors reaction capacity
Laboratory packing Highest number of theoretical stages per unit height..8.6.4 69 2532-2.2 Standard structured packings are hardly suitable for Sulzer laboratory packings are especially designed for this purpose..5.5 2 2.5 3 Preferred applications: 2 EX DX Special features: Small even with very low liquid loadings BX packing This packing has a coarser structure and hence a lower number of theoretical stages. Suitable for laboratory columns where a modest number of theoretical stages is required, together with low and high capacity. These packing types, made of sheet metal, have a 2 3 Laboratory packings
Rombopak The packing with the unique structure and performance.7.6.5.4.3 developed for the ambitious distillation requirements of the most diverse applications and has become a well established preferred choice of the pharmaceutical industry and specialty chemistry..2. 2 3 4 5 6 Special features streamlined lamellas resulting in a reduced vapor load Rombopak 9M 67 96 parameter = head pressure p mbar Rombopak S4M 67 96 Preferred applications minimum regulated processes Typical product applications Rombopak types Rombopak S4M 9M 2.4 6. 8.. Rombopak 2 3 4 5 6
Mellapak 25.Y/X A highly versatile packing type.8.6.4.2 62 25 sheet metal thicknesses from. mm up. 96 4 5 2 3 4 5 6 Mellapak 25.Y Mellapak 25.X parameter = head pressure p mbar 96 4 5 Special features 2 h 2 h (typically in desorption columns) Preferred applications columns Typical applications industry: C - and C - splitters, xylene splitters 2 - and H 2 S-absorbers and strippers, ethyleneoxide absorbers and strippers, acrylonitrile absorbers. 2 3 4 5 6 Mellapak 25.Y Mellapak 25.X 8
Mellapak A solution available for any application.5...8.8..5.6.4.6.4.2.2 2 3 4 5 6 2 3 4 5 6 2 3 4 5 6 Mellapak 25.Y Mellapak 25.X 96 5 96 5 parameter = head pressure p mbar Mellapak 7.Y Mellapak 7.X 96 4 5 96 4 5 parameter = head pressure p mbar Mellapak 2Y 96 4 5 Mellapak 2X 96 4 5 parameter = head pressure p mbar. 2 3 4 5 6 Mellapak 25.Y Mellapak 25.X. 2 3 4 5 6 Mellapak 7.Y Mellapak 7.X. 2 3 4 5 6 Mellapak 2Y Mellapak 2X 9
Mellapak A solution available for any application.5.5.5.4.4.4.3.2.3.2.3.2... 2 3 4 2 3 4 2 3 Mellapak 35.Y 96 4 5 parameter = head pressure p mbar Mellapak 5.Y Mellapak 5.X 96 4 5 96 4 5 parameter = head pressure p mbar Mellapak 75.Y 96 5 parameter = head pressure p mbar. 2 3 4. 2 3 4 Mellapak 35.Y Mellapak 5.Y Mellapak 5.X. 2 3 Mellapak 75.Y
MellapakPlus A new generation of structured packings.6.5.4.3.2. 699 2522 4 all advantages of the metal sheet metrical features. Features of MellapakPlus At the lower and upper end of each packing element, the orientation of the corrugation gradually approaches the vertical axis. Advantages of this geometrical ges direction at the interface between two packing elements nearly parallel to the vertical axis of the column. The gas velocity is therefore reduced by about inside the packing element Both factors reduce the pressure drop and the shear forces, which are especially critical at the interface due to the presence of thicker interface is no longer of concern. element the geometrical features are identical. Hence, separation and a reduction in. mechanical strength and corrosion Internals The close resemblance between rantees continued use of the whole range of well known and reliable to handle the increased gas load typical for the high capacity of committed to the on-going, focused development of novel designs. 2 3 4 5 6 MellapakPlus 252.Y Mellapak 25.Y 96 4 96 4 parameter = head pressure p mbar. 2 3 4 5 6 MellapakPlus 252.Y vs. Mellapak 25.Y
MellapakPlus A new generation of structured packings.7.5.6.4.5.4.3.3.2.2.. 2 3 4 5 6 2 3 4 5 MellapakPlus 22.Y 96 parameter = head pressure p mbar parameter = head pressure p mbar MellapakPlus 452.Y 96 4 MellapakPlus 752.Y 96 4 parameter = head pressure p mbar. 2 3 4 5 6 MellapakPlus 22.Y MellapakPlus 352.Y MellapakPlus 62.Y. 2 3 4 5 MellapakPlus 452.Y MellapakPlus 752.Y 2
Gauze packings.5.4.3.2 682 27 This packing has been successfully employed in the Special features 2 h Preferred applications is important. 2 3 4 5 6 BX 96 4 5 parameter = head pressure p mbar separation effciency of BX and BXPlus is identical 96 5 BXPlus Product applications column diameter ID = 25 mm BXPlus for gentle distillation at higher capacity.. 2 3 4 5 6 Gauze packing BX Gauze packing BXPlus
Gauze packings Sulzer metal gauze packing, type CY.3.2. 4588 343 2 3 4 This packing was developed for separations that diameter supplied to date:.8 m. Special features 2 h Preferred applications Product applications 96 4 5 25 parameter = head pressure p mbar. 2 3 4 Gauze packing CY
Mellapak and MellapakPlus from plastics 2 (-2 m 2 h) 2 2 2 h) 682 22 operational record in various types of absorption and desorption columns. 2 h) Special features depending on the system approx. o C for polypropylene o Product applications 2 absorbers. dry 252.Y PP 25.X PP 25.Y PP.. Mellapak PP atmospheric pressure
Gauze packings Sulzer plastic gauze packing, type BX 682 22 The plastic gauze packing has been used industrially with great success for many years. The special gauze structure provides a very good wettability, even in aqueous systems. This packing is used primarily for columns with low liquid loads. Special features depending on the system 2 h solutions o C, depending on the chemical components parameter = liquid load l m 2 h Preferred applications Product applications Plastic gauze packing BX
Mellacarbon pure carbon.4.3.2. 697 2522 2 3 4 Mellacarbon 5.Y Mellacarbon 35.Y Mellacarbon 25.Y head pressure p mbar 96 Carbon does not react with most solvents, acids or lyes. 5 acid and carboxylic acids 2 o C) Product applications (typically in the production of polycarbonate).5 2 3 4 Mellacarbon
Mellagrid Sulzer structured grid packings capacity 694 256 tured packings with the mechanical resistance of a grid. mechanical strength of structured packings is a concern or where coking is likely to occur. Technical Data 694 256 load factor c 2 2 2 2 Surface structure smooth Special features fouling due to its smooth surface and geometrical structure temperature traditional grid structure allow for easy cleaning. and cleaned with a water jet Applications Wash section Slurry pumparound section Wash section Mellagrid o C, atmospheric pressure 8
Katapak-SP Sulzer reactive distillation packing.6.5.4.3.2. 6 27-6 2 3 4 This packing was developed to be applied in reactive distillation processes. With the modular concept sepa- diameter supplied to date: 2 m. Katapak-SP 2 96 4 parameter = head pressure p mbar Special features: Product applications:. Katapak 2 3 4 9
Column internals Liquid distributors High-Liquid-Load 6 25-6 25-3 6 25-2 l [m 2 h] 6 257-6 Standard-Load 69 25-5 6 25-4 69 25-69 25-4 69 25-6 Low Liquid-Load 69 25-7 69 25-2 6 25-5 69 25-3.8 2 2
Column internals Collector support grids Type Column diameter 6 259-4 support and a vane collector. As a packing support, it can support the direct load of packings with 2. plates are used. often used in applications where space between packed beds is limited. This collector requires a support ring inside the column. Collectors separate unit to accumulate liquids from packed sections within a column. This collector requires a ring channel welded to the column wall. 6 259-2 be installed between the column Chimney trays and versatile tray design, available either in bolted or seal-welded large diameter columns with high liquid loads. 6 256- from m 2
Column internals Collector-distributor systems/vapor distributor Type Column diameter 62 25-2 whenever collection and redistribution of liquid is required at very a chimney tray; however the chimney arrangement is custom liquid distribution and pressure drop requirements. cations, where liquid mixing is important, a separate accumulator tray must collect the liquid and feed it to a liquid distributor located below it. at increased pressures or - in conjunction with highly corrosion-resistant packings - in processes with agressive media. Supplementary information Support grids 6 253-4 structured packings. Both require support rings to be welded to the grids of the TSB pass through manholes and are clamped together for convenient installation. ideal for applications requiring expensive high-alloys. Certain high performance packings require additional drip plates. 6 253-2 from. m tured packings with surface area 2 packing volume. They are designed with drip plates the packing. These support grids rest on support rings or gussets welded to the beams may be required. 22
Revamping of existing columns Repacking the entire column cross-section Along with other aspects, this throughput. Repacking with column sleeve To improve product purity without good hydraulic performance of the Sulzer structured packings, the entire column cross-section is often not needed. The Sulzer smaller diameter. 8 9 8 9 Chemtech tomer with Sulzer advising or complete installation service by Sulzer as the customer wishes. Sulzer packing 2 Support grid 3 Support beam 4 Collector 5 Support lugs (welded-in) 6 Ring channel 7 Liquid distributor 8 Locating grid (hold-down grid) 9 Existing trays (incl. support rings) 682 244 682 245 Installation The new column internals are installed through the manholes: support beam, support grid, packing, locating grid, distributor and collector. 2 Installation The column head is taken off and the pre-assembled and pre-packed sleeves are lowered by crane onto column. The annular spaces are sealed off to prevent gas and liquid by-passing. 2 Repacking work (when required - depending upon the installation method of the packing) tie-bars and ring channels for the liquid collectors glasses at the level of each liquid distributor connections, if necessary Repacking time to the existing column may take one to four weeks, and several days to
Installation 695 25-3 Installation of packing 692 252-8 Revamping of a vacuum column with Mellapak 6 255-2 Inspecting packings after installation 62 259-39 Installation of the liquid distributor 683 26-2 The packing is fitted inside the column sleeves at the preassembly site 683 26- The column sleeve is lowered into the column with two cranes. Weight: tons
Sulzer columns your solution Sulzer columns of sectional design All internals can be installed through Welded column, monoblock type All internals in segments for installation and removal through to mm Sulzer packing in various types and different materials Support grid 2 for the packing from condenser 5 Liquid collector 3 Feed pipe 4 to distributor from condenser 6 Liquid distributor 5 mounted on locating grid Locating grid 6 Steam inlet pipe 7 3 4 5 3 Column sump 8 4 Circulation pipe 9 to reboiler Skirt 2 Anchorage 7 2 Variations on the above design Side stream: 8 9 Bottom product Bottom product 694 25 694 25
Separation technology laboratory Comprehensive customer service Distributor test facility Uniform liquid distribution is decisive in securing good sepa- rating structured packings especially for columns of large diameter. This requirement was recognized early on in the development of the Sulzer structured packings. Hence packings promotes liquid stream intersections and thus intermixing. distributors has been developed, which are optimally matched for column diameter, packing type and operating conditions. The distributor test facility has provided results which have con- struction of large distributors with control, all distributor types are fully tested before delivery to customers. Sulzer Chemtech is Laboratories Sulzer Chemtech has set up a process engineering laboratory in Winterthur, Switzerland for development and testing of structured packings, column internals and trays. At Sulzer Chemtech Allschwil customer trials and pilot tests. Also an analytical laboratory and trained personnel are available. 6 2566-682 226 Distributors on the Sulzer Chemtech distributor test facility Multi-purpose pilot plant for the separation of mixtures by distillation, using Sulzer structured packings of various design
Formula notation 2 2 h (related to empty column) l 2 (related to empty column) - - per meter packed height - - per meter packed height theoretical plate c ρ (ρ - ρ ). ρ w (related to empty column) ρ ρ ΔΔ 2 A c Column cross-section m 2 2 d c ψ. ρ ρ to US Units multiply by
www.sulzer.com Please check for your local contact Sulzer Chemtech Ltd, a member of the Sulzer Corporation, with headquarters in Winterthur, Switzerland, is active in the field of process engineering and employs some 4 persons worldwide. Sulzer Chemtech is represented in all important industrial countries and sets standards in the field of mass transfer and static mixing with its advanced and economical solutions. The activity program comprises: random packings, liquid and gas distributors, gas-liquid separators, and internals for separation columns conceptual process design, feasibilities studies, plant optimizations including process validation in the test center chemical industry, or difficult separations requiring the combination of special technologies, such as thin film/short-path evaporation, distillation under high vacuum, liquid-liquid extraction, membrane technology or crystallization. (skids) maintenance, welding, and plant turnaround projects disposable mixers for reactive multi-component material Distributed by: 22.3.6.4 - XI.3-5 - Printed in Switzerland Legal Notice: The information contained in this publication is believed to be accurate and reliable, but is not to be construed as implying any warranty or guarantee of performance. Sulzer Chemtech waives any liability and indemnity for effects resulting from its application.