<< Grass Tiomos Soft & Self-Close H-2 << Grass Nexis & Impresso H-16 << Grass Unisoft Soft-Close H-29 << Grass Soft & Self-Close Face Frame H-30 << Grass Institutional Barrel H-36 << RPC 5-Knuckle Institutional H-37 << Sugatsune Elan Door Lifter Systems H-40 << EPCO Glass Door H-54 section H Table of contents Starting Page Grass Tiomos Soft & Self-Close H-2 Grass Nexis & Impresso H-16 Grass Soft-Close H-28 Grass Face Frame H-30 Grass Institutional Barrel H-36 5-Knuckle Institutional H-37 Flap H-38 Sugatsune Door Lifter Systems H-40 Amerock Decorative H-45 Amerock Full Inset Finial Tip H-50 Terry Continuous/Piano H-52 Glass Door H-53 Hinge, Hardware & Slide Screws H-55 & Lid A B C D E F G H I J K L M N Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p 800.236.0188 f 920.494.9410 SUN PRAIRIE p 877.942.4400 f 608.834.2243 WEST SALEM p 800.879.8123 f 608.786.4044 PEKIN, IL p 800.879.9123 f 309.347.1133 www.amerhart.com H-1
H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS TIOMOS HINGE SYSTEM Tiomos Integrated Soft-Close, Self-Close and Free-Swing Hinge Soft-close inside. The entire damper technology is concealed inside the hinge arm. A completely new hinge system. Tiomos is a completely new hinge concept. The product range provides perfect movement for virtually every application, from standard doors to wide angle doors, from frameless to face frame applications. Tiomos offers an adjustable soft close mechanism, which is fully integrated and concealed in the hinge arm. The closing process is extremely smooth from the degree that the Soft-close is activated until the door is completely shut. The cabinet door pulls open with ease and minimal gaps can be achieved. Tool-less Soft-close adjustment Soft-closing performance can be regulated for any door size and weight with the Tiomos adjustable, integrated Soft-Close. Each hinge can be adjusted differently with a 2 hinge install giving you 6 Soft-close settings. Light setting Adjustment lever points toward the cabinet wall. Appropriate for: Small, light doors Adjustments The options for height adjustment depend on the type of base plate. All adjustments can be made independent of one another. For height adjustment, select base plates have worm gear adjustment access through the hinge arm. Medium setting (factory setting) Adjustment lever is parallel to the cabinet wall. This setting covers 80% of door applications. Side adjustment Appropriate for: Standard doors Depth adjustment via worm gear Strong setting Adjustment lever points toward the cabinet interior. Appropriate for: Large, heavy doors Height adjustment via base plate H-2 MILWAUKEE p 800.642.1733 f 414.351.1668 MINNESOTA p 877.588.3192 f 877.588.3193 TRAVERSE CITY, MI p 877.700.5190 f 231.267.5329 ST LOUIS, MO p 800.533.7557 f 314.533.5730
Tiomos Technical Information Reveal The reveal (R) is the distance required between two doors or between the door and sidewall of the cabinet to allow sufficient space for opening the door. The required reveal width (R) depends on the thickness of the door. Most cabinet makers prefer a reveal (R) of between 3mm and 6mm. Reveal for full overlay, overlay, & half overlay doors The table shows the reveal necessary between two doors or between door and side wall to allow enough space for opening the door. Example: For a door thickness of 19mm and a drilling distance (DD) of 6mm a (R) reveal of 0.9mm is needed. Full Overlay/Overlay Door Note: Reveal dimensions were determined with a door edge radius of 1mm. Hinge dimensions and calculation of reveal with factory setting. Drilling Distance Cup Center Number of hinges per door The number of hinges required depends on the size and weight of the door. The distance between the hinges should be spaced as wide as possible. Use the diagram to determine the number of hinges needed. These recommendations are for doors without any accessory attachments. Reveal Overlay Base Plate Centerline Inset Reveal Reveal GRASS TIOMOS HINGE SYSTEM Half Overlay Door Reveal for inset doors The table shows the minimum reveal for an inset door, depending on the drilling distance (DD) and the base plate height (BPH). Example: A drilling distance (DD) of 6mm results from using a base plate with height of 3mm and a reveal (R) of 1.0mm Inset Door IMPORTANT: To determine the correct application, Grass strongly recommends a trial mounting for all hinges and base plates. Twin Application Reveal A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p 800.236.0188 f 920.494.9410 SUN PRAIRIE p 877.942.4400 f 608.834.2243 WEST SALEM p 800.879.8123 f 608.786.4044 PEKIN, IL p 800.879.9123 f 309.347.1133 www.amerhart.com H-3
H GRASS TIOMOS IMPRESSO TOOL-LESS HINGES Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband H-4 Installation 1 2 3 Tiomos Impresso - Quick, simple and reliable hinge mounting without tools. The Tiomos Impresso hinge series is designed to assemble quickly and easily without tools. This is especially useful in cabinetry that is flat-packed and shipped unassembled with pre-drilled doors. The Tiomos Impresso hinge can MILWAUKEE p 800.642.1733 f 414.351.1668 be installed quickly and accurately on site. Simply insert the Tiomos Impresso hinge into the bored door and close the hinge flap to engage. The hinge sits firmly and securely in the door and does not allow for twisting due to a 3 point connection of the hinge cup to the door. The Tiomos Impresso is perfect for door material such as particleboard, MINNESOTA p 877.588.3192 f 877.588.3193 solid wood, and MDF board. Hinge cup with combination drilling pattern. All Impresso hinges are offered in a combination drilling pattern 42mm / 45mm. This combination fits all of the most popular boring patterns offered in today s market. Tool-Less Standard - Available Free-Swing, Soft-Close and Self-Close (Fits 42 and 45mm Pattern) Description Qty Less Full FREE-SWING # Less Full 110 OPENING - IMPRESSO TOOL-LESS HINGES 19mm Overlay 150 EA GRAF035139443228 Half Overlay 150 EA GRAF035139444228 SOFT-CLOSE # SELF-CLOSE # Full+ 22mm Overlay 150 EA GRAF017139414228 GRAF034139385228 19mm Overlay 150 EA GRAF017139415228 GRAF034139386228 Half Overlay 150 EA GRAF017139416228 GRAF034139387228 Inset Hinge 150 EA GRAF017139417228 GRAF034139388228 120 OPENING - IMPRESSO TOOL-LESS HINGES Full+ 22mm Overlay 150 EA GRAF017139428228 GRAF034139399228 19mm Overlay 150 EA GRAF017139429228 GRAF034139400228 Half Overlay 150 EA GRAF017139430228 GRAF034139401228 160 OPENING - IMPRESSO TOOL-LESS HINGES Full+ 25mm Overlay 50 EA GRAF017139435217 GRAF034139406217 22mm Overlay 50 EA GRAF017139436217 GRAF034139407217 Half Overlay 50 EA GRAF017139437217 GRAF034139408217 95 OPENING - THINK DOOR - IMPRESSO TOOL-LESS HINGES Full+ 22mm Overlay 150 EA GRAF017139438228 GRAF034139409228 19mm Overlay 150 EA GRAF017139439228 GRAF034139410228 Half Overlay 150 EA GRAF017139440228 GRAF034139411228 Inset Hinge 150 EA GRAF017139441228 GRAF034139412228 Tool-Less Specialty - Available Soft-Close and Self-Close (Fits 42 and 45mm Pattern) Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 110 OPENING - BLIND CORNER - IMPRESSO TOOL-LESS HINGES Full+ 22mm Overlay 100 EA GRAF017139426223 GRAF034139397223 Inset Hinge 100 EA GRAF017139427223 GRAF034139398223 110 OPENING - +30 ANGLE - IMPRESSO TOOL-LESS HINGES 20.5mm Overlay 100 EA GRAF017139420223 GRAF034139391223 Inset Hinge 100 EA GRAF017139421223 GRAF034139392223 110 OPENING - +37 ANGLE - IMPRESSO TOOL-LESS HINGES 21.5mm Overlay 100 EA GRAF017139422223 GRAF034139393223 Inset Hinge 100 EA GRAF017139423223 GRAF034139394223 110 OPENING - +45 ANGLE - IMPRESSO TOOL-LESS HINGES 19.5mm Overlay 100 EA GRAF017139424223 GRAF034139395223 Inset Hinge 100 EA GRAF017139425223 GRAF034139396223 120 OPENING - -15 ANGLE - IMPRESSO TOOL-LESS HINGES 18mm Overlay 100 EA GRAF017139432223 GRAF034139403223 120 OPENING - -30 ANGLE - IMPRESSO TOOL-LESS HINGES 19mm Overlay 100 EA GRAF017139433223 GRAF034139404223 120 OPENING - -45 ANGLE - IMPRESSO TOOL-LESS HINGES 12mm Overlay 100 EA GRAF017139434223 GRAF034139405223 Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H-15 Download a Grass Tiomos catalog at http://www.grassusa.com/catalog_downloads.html TRAVERSE CITY, MI p 877.700.5190 f 231.267.5329 ST LOUIS, MO p 800.533.7557 f 314.533.5730
Tiomos 110 Snap-On Free-Swing, Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns Door thickness up to 24mm (15/16") Accommodates overlays up to 22mm (7/8") Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Free-Swing, Soft-Close with 3 adjustable closing levels or Self-Close Installation lnformation Full+ overlay Overlay Half overlay Inset GRASS TIOMOS 110 OPENING HINGES Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Screw-On Impresso & Doweled Description Qty Less Full FREE-SWING # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES 19mm Overlay 150 EA GRAF035139443228 Half Overlay 150 EA GRAF035139444228 SOFT-CLOSE # SELF-CLOSE # Full+ 22mm Overlay 150 EA GRAF017139414228 GRAF034139385228 19mm Overlay 150 EA GRAF017139415228 GRAF034139386228 Half Overlay 150 EA GRAF017139416228 GRAF034139387228 Inset Hinge 150 EA GRAF017139417228 GRAF034139388228 42MM BORE DOWELED HINGES (GRASS PATTERN) Full+ 22mm Overlay 150 EA GRAF028138341228 GRAF045138279228 19mm Overlay 150 EA GRAF028138342228 GRAF045138280228 Half Overlay 150 EA GRAF028138343228 GRAF045138281228 Inset Hinge 150 EA GRAF028138344228 GRAF045138282228 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full+ 22mm Overlay 150 EA GRAF028138523228 GRAF045138461228 19mm Overlay 150 EA GRAF028138524228 GRAF045138462228 Half Overlay 150 EA GRAF028138525228 GRAF045138463228 Inset Hinge 150 EA GRAF028138526228 GRAF045138464228 45MM BORE SCREW-ON HINGES Full+ 22mm Overlay 150 EA GRAF028138519228 GRAF045138457228 19mm Overlay 150 EA GRAF028138520228 GRAF045138458228 Half Overlay 150 EA GRAF028138521228 GRAF045138459228 Inset Hinge 150 EA GRAF028138522228 GRAF045138460228 ACCESSORIES Qty Item # Less Full 85 Opening Angle Reduction Clip 50 EA GRAF072135751517 Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p 800.236.0188 f 920.494.9410 SUN PRAIRIE p 877.942.4400 f 608.834.2243 WEST SALEM p 800.879.8123 f 608.786.4044 PEKIN, IL p 800.879.9123 f 309.347.1133 www.amerhart.com H-5
H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS TIOMOS 120 OPENING HINGES Tiomos 120 Snap-On Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns Door thickness up to 24mm (15/16") Accommodates overlays up to 22mm (7/8") Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Installation lnformation Full+ overlay Overlay Half overlay Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Download a Grass Tiomos catalog at http://www.grassusa.com/catalog_downloads.html Minimum Reveal Screw-On Impresso & Doweled Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full+ 22mm Overlay 150 EA GRAF017139428228 GRAF034139399228 19mm Overlay 150 EA GRAF017139429228 GRAF034139400228 Half Overlay 150 EA GRAF017139430228 GRAF034139401228 42MM BORE DOWELED HINGES (GRASS PATTERN) Full+ 22mm Overlay 150 EA GRAF028138369228 GRAF045138307228 19mm Overlay 150 EA GRAF028138370228 GRAF045138308228 Half Overlay 150 EA GRAF028138371228 GRAF045138309228 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full+ 22mm Overlay 150 EA GRAF028138551228 GRAF045138489228 19mm Overlay 150 EA GRAF028138552228 GRAF045138490228 Half Overlay 150 EA GRAF028138553228 GRAF045138491228 45MM BORE SCREW-ON HINGES Full+ 22mm Overlay 150 EA GRAF028138547228 GRAF045138485228 19mm Overlay 150 EA GRAF028138548228 GRAF045138486228 Half Overlay 150 EA GRAF028138549228 GRAF045138487228 ACCESSORIES Qty Item # Less Full 85 Opening Angle Reduction Clip 50 EA GRAF072135751517 Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 H-6 MILWAUKEE p 800.642.1733 f 414.351.1668 MINNESOTA p 877.588.3192 f 877.588.3193 TRAVERSE CITY, MI p 877.700.5190 f 231.267.5329 ST LOUIS, MO p 800.533.7557 f 314.533.5730
Tiomos 160 Snap-On Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns Door thickness up to 32mm (1-1/4") Accommodates overlays up to 25.4mm (1") Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Shallow (10mm) cup depth Zero protrusion when door is opened 90 Available Soft-Close with 3 adjustable closing levels or Self-Close Installation lnformation Full+ overlay GREEN BAY p 800.236.0188 f 920.494.9410 Overlay SUN PRAIRIE p 877.942.4400 f 608.834.2243 Half overlay Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Note: Standard cup distance is 3mm. Larger overlays are accomplished by increasing the cup distance. Download a Grass Tiomos catalog at http://www.grassusa.com/catalog_downloads.html WEST SALEM p 800.879.8123 f 608.786.4044 GRASS TIOMOS 160 OPENING HINGES PEKIN, IL p 800.879.9123 f 309.347.1133 Minimum Reveal Screw-On Impresso & Doweled Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full+ 25mm Overlay 50 EA GRAF017139435217 GRAF034139406217 22mm Overlay 50 EA GRAF017139436217 GRAF034139407217 Half Overlay 50 EA GRAF017139437217 GRAF034139408217 42MM BORE DOWELED HINGES (GRASS PATTERN) Full+ 25mm Overlay 50 EA GRAF028138382217 GRAF045138320217 22mm Overlay 50 EA GRAF028138383217 GRAF045138321217 Half Overlay 50 EA GRAF028138384217 GRAF045138322217 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full+ 25mm Overlay 50 EA GRAF028138564217 GRAF045138502217 22mm Overlay 50 EA GRAF028138565217 GRAF045138503217 Half Overlay 50 EA GRAF028138566217 GRAF045138504217 45MM BORE SCREW-ON HINGES Full+ 25mm Overlay 50 EA GRAF028138561217 GRAF045138499217 22mm Overlay 50 EA GRAF028138562217 GRAF045138500217 Half Overlay 50 EA GRAF028138563217 GRAF045138501217 ACCESSORIES Qty Item # Less Full 120 Opening Angle Reduction Clip 50 EA GRAF072135753117 Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 www.amerhart.com A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-7
H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband H-8 GRASS TIOMOS 95 OPENING THICK DOOR HINGES Tiomos 95 Snap-On Thick Door Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns Door thickness up to 36mm (1-7/16") Accommodates overlays up to 22mm (7/8") Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Installation lnformation Full+ overlay Overlay Half overlay Inset Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Set mounting plate back by door thickness +1.5 mm Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full+ 22mm Overlay 150 EA GRAF017139438228 GRAF034139409228 19mm Overlay 150 EA GRAF017139439228 GRAF034139410228 Half Overlay 150 EA GRAF017139440228 GRAF034139411228 Inset Hinge 150 EA GRAF017139441228 GRAF034139412228 42MM BORE DOWELED HINGES (GRASS PATTERN) Full+ 22mm Overlay 150 EA GRAF028138389228 GRAF045138327228 19mm Overlay 150 EA GRAF028138390228 GRAF045138328228 Half Overlay 150 EA GRAF028138391228 GRAF045138329228 Inset Hinge 150 EA GRAF028138392228 GRAF045138330228 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full+ 22mm Overlay 150 EA GRAF028138571228 GRAF045138509228 19mm Overlay 150 EA GRAF028138572228 GRAF045138510228 Half Overlay 150 EA GRAF028138573228 GRAF045138511228 Inset Hinge 150 EA GRAF028138574228 GRAF045138512228 45MM BORE SCREW-ON HINGES Full+ 22mm Overlay 150 EA GRAF028138567228 GRAF045138505228 19mm Overlay 150 EA GRAF028138568228 GRAF045138506228 Half Overlay 150 EA GRAF028138569228 GRAF045138507228 Inset Hinge 150 EA GRAF028138570228 GRAF045138508228 ACCESSORIES Qty Item # Less Full 85 Opening Angle Reduction Clip 50 EA GRAF072135751517 Download a Grass Tiomos catalog at http://www.grassusa.com/catalog_downloadshtml MILWAUKEE p 800.642.1733 f 414.351.1668 MINNESOTA p 877.588.3192 f 877.588.3193 TRAVERSE CITY, MI p 877.700.5190 f 231.267.5329 Screw-On ST LOUIS, MO p 800.533.7557 f 314.533.5730 Impresso & Doweled Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15
GREEN BAY p 800.236.0188 f 920.494.9410 SUN PRAIRIE p 877.942.4400 f 608.834.2243 GRASS TIOMOS 110 OPENING BLIND CORNER HINGES Tiomos 110 Snap-On Blind Corner Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns For use on Overlay or Inset Blind Corner Doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Installation lnformation Overlay Inset Screw-On Mounting plate height 3 Mounting plate height 3 Impresso Drilling distance (x) Download a Grass Tiomos catalog at http://www.grassusa.com/catalog_downloads.html Drilling distance (x) WEST SALEM p 800.879.8123 f 608.786.4044 Cup distance PEKIN, IL p 800.879.9123 f 309.347.1133 Drilling distance (x) Cup distance Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full+ 22mm Overlay 100 EA GRAF017139426223 GRAF034139397223 Inset Hinge 100 EA GRAF017139427223 GRAF034139398223 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full+ 22mm Overlay 100 EA GRAF028138545223 GRAF045138483223 Inset Hinge 100 EA GRAF028138546223 GRAF045138484223 45MM BORE SCREW-ON HINGES Full+ 22mm Overlay 100 EA GRAF028138535223 GRAF045138473223 Inset Hinge 100 EA GRAF028138536223 GRAF045138474223 Doweled Drilling distance (x) Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 www.amerhart.com A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-9
H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS TIOMOS 110 OPENING SPECIAL ANGLE CABINET HINGES Tiomos 110 Snap-On +30 Soft-Close and Self-Close Available Screw-On and Tool-Less in 42 & 45mm Patterns For use on overlay or inset 30 positive angle cabinet doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Overlay Mounting plate height 0 Tiomos 110 Snap-On +37 Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns For use on overlay or inset 37 positive angle cabinet doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Overlay Mounting plate height 0 Screw-On Download a Grass Tiomos catalog at http://www.grassusa.com/catalog_downloads.html Impresso Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES 20.5mm Overlay 100 EA GRAF017139420223 GRAF034139391223 Inset Hinge 100 EA GRAF017139421223 GRAF034139392223 45MM BORE SCREW-ON HINGES 20.5mm Overlay 100 EA GRAF028138529223 GRAF045138467223 Inset Hinge 100 EA GRAF028138530223 GRAF045138468223 Screw-On Impresso Doweled Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES 21.5mm Overlay 100 EA GRAF017139422223 GRAF034139393223 Inset Hinge 100 EA GRAF017139423223 GRAF034139394223 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) 21.5mm Overlay 100 EA GRAF028138541223 GRAF045138479223 45MM BORE SCREW-ON HINGES 21.5mm Overlay 100 EA GRAF028138531223 GRAF045138469223 Inset Hinge 100 EA GRAF028138532223 GRAF045138470223 Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 H-10 MILWAUKEE p 800.642.1733 f 414.351.1668 MINNESOTA p 877.588.3192 f 877.588.3193 TRAVERSE CITY, MI p 877.700.5190 f 231.267.5329 ST LOUIS, MO p 800.533.7557 f 314.533.5730
GRASS TIOMOS 110-120 OPENING SPECIAL ANGLE CABINET HINGES Tiomos 110 Snap-On +45 Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns For use on overlay or inset 45 positive angle cabinet doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Overlay Mounting plate height 0 Tiomos 120 Snap-On -15 Soft-Close and Self-Close Available Screw-On and Tool-Less in 42 & 45mm Patterns For use on overlay -15 negative angle cabinet doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Overlay Mounting plate height 0 Screw-On Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES 19.5mm Overlay 100 EA GRAF017139424223 GRAF034139395223 Inset Hinge 100 EA GRAF017139425223 GRAF034139396223 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) 19.5mm Overlay 100 EA GRAF028138543223 GRAF045138481223 Inset Hinge 100 EA GRAF028138544223 GRAF045138482223 45MM BORE SCREW-ON HINGES 19.5mm Overlay 100 EA GRAF028138533223 GRAF045138471223 Inset Hinge 100 EA GRAF028138534223 GRAF045138472223 Screw-On Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES 18mm Overlay 100 EA GRAF017139432223 GRAF034139403223 45MM BORE SCREW-ON HINGES 18mm Overlay 100 EA GRAF028138555223 GRAF045138493223 Impresso Download a Grass Tiomos catalog at go to: http://www.grassusa.com/catalog_downloads.html Impresso Doweled Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p 800.236.0188 f 920.494.9410 SUN PRAIRIE p 877.942.4400 f 608.834.2243 WEST SALEM p 800.879.8123 f 608.786.4044 PEKIN, IL p 800.879.9123 f 309.347.1133 www.amerhart.com H-11
H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS TIOMOS 120 OPENING SPECIAL ANGLE CABINET HINGES Tiomos 120 Snap-On -30 Soft-Close and Self-Close Available Screw-On and Tool-Less in 42 & 45mm Patterns For use on overlay -30 negative angle cabinet doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Overlay Tiomos 120 Snap-On -45 Soft-Close and Self-Close Available Screw-On and Tool-Less in 42 & 45mm Patterns For use on overlay -45 negative angle cabinet doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Overlay Mounting plate height 2 Mounting plate height 2 Screw-On Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES 19mm Overlay 100 EA GRAF017139433223 GRAF034139404223 45MM BORE SCREW-ON HINGES 19mm Overlay 100 EA GRAF028138556223 GRAF045138494223 Screw-On Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Half-12mm Overlay 100 EA GRAF017139434223 GRAF034139405223 45MM BORE SCREW-ON HINGES Half-12mm Overlay 100 EA GRAF028138557223 GRAF045138495223 Download a Grass Tiomos catalog at http://www.grassusa.com/catalog_downloads.html Impresso Impresso Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 H-12 MILWAUKEE p 800.642.1733 f 414.351.1668 MINNESOTA p 877.588.3192 f 877.588.3193 TRAVERSE CITY, MI p 877.700.5190 f 231.267.5329 ST LOUIS, MO p 800.533.7557 f 314.533.5730
Tiomos 65 Snap-On Pie-Cut Corner Self-Close Available Screw-On or Doweled in 42 & 45mm Patterns For use on 2 folding doors in a corner cabinet Convenient depth adjustment via worm gear For door thicknesses 14-22 mm 3-dimensional adjustment with appropriate mounting plate Available Self-Closing Used with Tiomos 160 16mm door thickness with base plate height 0 Tiomos 160 Hinge GRASS TIOMOS 65 OPENING PIE-CUT CORNER HINGES 19mm door thickness with base plate height 0 Tiomos PCC Hinge Screw-On Description Qty SELF-CLOSE # Less Full 42MM BORE DOWELED HINGES (GRASS PATTERN) Pie Cut Corner Hinge 150 EA GRAF045138336228 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Pie Cut Corner Hinge 150 EA GRAF045138518228 45MM BORE SCREW-ON HINGES Pie Cut Corner Hinge 150 EA GRAF045138517228 Doweled Adjustment for door thickness 14-24mm. Factory setting is 19mm. Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 Download a Grass Tiomos catalog at http://www.grassusa.com/catalog_downloads.html A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p 800.236.0188 f 920.494.9410 SUN PRAIRIE p 877.942.4400 f 608.834.2243 WEST SALEM p 800.879.8123 f 608.786.4044 PEKIN, IL p 800.879.9123 f 309.347.1133 www.amerhart.com H-13
H GRASS TIOMOS SNAP-ON BASEPLATES & ACCESSORIES Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband Eco Wing Steel Mounting Plate, 3-Point Fixing, Wood Screw Attachment (37/32) Height Adjustment via Slot Item # Description Qty Less Full GRAF058139721228 0 mm Steel Nickel Plate 150 EA GRAF058139722228 2 mm Steel Nickel Plate 150 EA GRAF058139723228 3 mm Steel Nickel Plate 150 EA GRAF058139724228 3.5 mm Steel Nickel Plate 150 EA Eco Wing Steel Mounting Plate, 3-Point Fixing, Pre-Attached 13.5mm Euro-Screws (37/32) Height Adjustment via Slot Item # Description Qty Less Full GRAF058139736228 0 mm Steel Nickel Plate 150 EA GRAF058139737228 2 mm Steel Nickel Plate 150 EA GRAF058139738228 3 mm Steel Nickel Plate 150 EA GRAF058139739228 3.5 mm Steel Nickel Plate 150 EA 1D Wing Mounting Plate, 4-Point Fixing, Wood Screw Attachment (37/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF058139746228 0 mm Steel Nickel Plate 150 EA GRAF058139747228 2 mm Steel Nickel Plate 150 EA GRAF058139748228 3 mm Steel Nickel Plate 150 EA GRAF058139749228 3.5 mm Steel Nickel Plate 150 EA 1D Wing Mounting Plate, 4-Point Fixing, Euro-Screw Attachment (37/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF058139756228 0 mm Steel Nickel Plate 150 EA GRAF058139757228 2 mm Steel Nickel Plate 150 EA GRAF058139758228 3 mm Steel Nickel Plate 150 EA GRAF058139759228 3.5 mm Steel Nickel Plate 150 EA 1D Wing Mounting Plate, 4-Point Fixing, Pre-Attached 13.5mm Euro-Screws (37/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF058139761228 0 mm Steel Nickel Plate 150 EA GRAF058139762228 2 mm Steel Nickel Plate 150 EA GRAF058139763228 3 mm Steel Nickel Plate 150 EA GRAF058139764228 3.5 mm Steel Nickel Plate 150 EA 1D Wing Mounting Plate, 4-Point Fixing, Pre-Attached 10mm Euro-Screws (37/32) For Back to Back Mounting. Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF058139863228 0 mm Steel Nickel Plate 150 EA GRAF058139864228 2 mm Steel Nickel Plate 150 EA GRAF058139865228 3 mm Steel Nickel Plate 150 EA GRAF058139866228 3.5 mm Steel Nickel Plate 150 EA 1D Wing Mounting Plate, 4-Point Fixing, Pre-Attached 5mm X 11mm Expanding Dowels (37/32) Can be Removed & Reinstalled w/minimal Damage - Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF058139766228 0 mm Steel Nickel Plate 150 EA GRAF058139767228 2 mm Steel Nickel Plate 150 EA GRAF058139768228 3 mm Steel Nickel Plate 150 EA 1D Wing Mounting Plate, 2-Point Fixing, Wood or Euro Screw Attachment (37/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF058139892217 6 mm Steel Nickel Plate 50 EA GRAF058139888217 9.5 mm Steel Nickel Plate 50 EA GRAF058139893217 12 mm Steel Nickel Plate 50 EA GRAF058139894217 19 mm Steel Nickel Plate 50 EA GRAF058139895217 21 mm Steel Nickel Plate 50 EA 1D Wing Mounting Plate, 2-Point Fixing, Pre-Attached 13.5mm Euro-Screws (37/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF058139873217 6 mm Steel Nickel Plate 50 EA GRAF058139882217 9.5 mm Steel Nickel Plate 50 EA GRAF058139874217 12 mm Steel Nickel Plate 50 EA GRAF058139875217 19 mm Steel Nickel Plate 50 EA GRAF058139896217 21 mm Steel Nickel Plate 50 EA H-14 MILWAUKEE p 800.642.1733 f 414.351.1668 MINNESOTA p 877.588.3192 f 877.588.3193 TRAVERSE CITY, MI p 877.700.5190 f 231.267.5329 ST LOUIS, MO p 800.533.7557 f 314.533.5730
GRASS TIOMOS SNAP-ON BASEPLATES & HINGE COVER CAPS H 1D Straight Mounting Plate, 2-Point Fixing, Wood Screw Attachment (20/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF059139701228 0 mm Steel Nickel Plate 150 EA GRAF059139702228 2 mm Steel Nickel Plate 150 EA GRAF059139703228 3 mm Steel Nickel Plate 150 EA 1D Straight Mounting Plate, 2-Point Fixing, Pre-Attached 13.5mm Euro-Screws (20/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF059139711228 0 mm Steel Nickel Plate 150 EA GRAF059139712228 2 mm Steel Nickel Plate 150 EA GRAF059139713228 3 mm Steel Nickel Plate 150 EA 1D Face Frame Mounting Plate, 2-Point Fixing, Wood Screw Attachment (9.5/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF058139825228 1.5 mm Steel Nickel Plate 150 EA GRAF058139826228 3.5 mm Steel Nickel Plate 150 EA GRAF058139827228 4.5 mm Steel Nickel Plate 150 EA GRAF058139828228 5.0 mm Steel Nickel Plate 150 EA Face Frame Mounting Plate, 2-Point Fixing, Wood Screw Attachment (9.5/32) Height Adjustment via Slot Item # Description Qty Less Full GRAF058139821228 1.5 mm Steel Nickel Plate 150 EA GRAF058139822228 3.5 mm Steel Nickel Plate 150 EA GRAF058139823228 4.5 mm Steel Nickel Plate 150 EA GRAF058139824228 5.0 mm Steel Nickel Plate 150 EA Face Frame Mounting Plate with Lip, 4-Point Fixing, Wood Screw Attachment (9.5/32) Height Adjustment via Slot For use with softer woods such as pine, poplar or alder Item # Description Qty Less Full GRAF058139829228 3.5 mm Steel Nickel Plate 150 EA GRAF058139830228 5.0 mm Steel Nickel Plate 150 EA Inset Beaded Face Frame Mounting Plate, 3-Point Fixing, Wood Screw Attachment (10/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF058139831228 0 mm Steel Nickel Plate 150 EA Requires Half-Overlay Hinge Mounting Plate Wedges for Special Angles For use with all wing mounting plates Can be stacked to achieve different angles +5 wedge -5 wedge Item # Description Qty Less Full +5 WEDGE FOR USE WITH WING MOUNTING PLATES (37/32) GRAF072135757217 3 mm Zamak Nickel Plated Wedge / Can be Stacked (max 3) 50 EA -5 WEDGE FOR USE WITH WING MOUNTING PLATES (37/32) GRAF072135758217 3 mm Zamak Nickel Plated Wedge / Can be Stacked (max 3) 50 EA Hinge Arm and Hinge Cup Cover Caps - Steel Nickel Plated Arm Cap Long Arm Cap Cup Cover Cap Item # Description Qty Less Full GRAF072135500247 Hinge Arm Cover Cap for All 1000 EA GRAF072135504247 Hinge Arm Cover Cap, Long, for Full Overlay Only 1000 EA GRAF072135503228 Hinge Cup Cover Cap, for All 150 EA A B C D E F G H I J K L M N Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p 800.236.0188 f 920.494.9410 SUN PRAIRIE p 877.942.4400 f 608.834.2243 WEST SALEM p 800.879.8123 f 608.786.4044 PEKIN, IL p 800.879.9123 f 309.347.1133 www.amerhart.com H-15
H GRASS NEXIS IMPRESSO AND NEXIS HINGES Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband Nexis Impresso Quick, simple and reliable hinge mounting without tools. The Nexis Impresso hinge series is designed to assemble quickly and easily without tools. This is especially useful in cabinetry that is flat-packed and shipped unassembled with pre-drilled doors. The Nexis Impresso hinge can be installed quickly and accurately on site. Simply insert the Nexis Impresso hinge into the bored door and close the hinge flap to engage. The hinge sits firmly and securely in the door and does not allow for twisting due to a 3 point connection of the hinge cup to the door. The Nexis Impresso is perfect for door material such as particleboard, solid wood, and MDF board. Hinge cup with combination drilling pattern. All Impresso hinges are offered in a combination drilling pattern 42mm / 45mm. This combination fits all of the most popular boring patterns offered in today s market. Nexis Proven technology makes Nexis the classic choice among hinge systems. The Nexis hinge series offer added value through a number of design solutions that will meet any application requirement whether it be frame or frameless. Choose from hinge opening angles ranging from 95 to 170 and from hinges designed for special applications such as negative angle and pie cut corner applications. The Nexis series is available in a screwon or doweled version and is offered in a 42mm or 45mm boring pattern. The Nexis base plates offer slotted or cam adjustment, 2-3 point fixing, screwon or Euro screw versions for frame and frameless cabinetry. The hinges mount easily in a user friendly snap-on method. Just one push connects the hinge to the plate. Add a touch of innovation with the unique Soft-close controlled closing device to bring a calming quiet to closing doors. During the closing action, the Soft-close creates a cushion that controls and slows the door to a gentle stop. The Soft-close device attaches easily without tools for a simple installation. H-16 MILWAUKEE p 800.642.1733 f 414.351.1668 MINNESOTA p 877.588.3192 f 877.588.3193 TRAVERSE CITY, MI p 877.700.5190 f 231.267.5329 ST LOUIS, MO p 800.533.7557 f 314.533.5730
GRASS NEXIS & IMPRESSO SNAP-ON HINGES 110 OPENING Nexis and Impresso 110 Snap-On & Soft Close Absorbers Tool-free hinge to baseplate connection and removal 3 dimensional adjustment: side, depth, and height Cam height and depth adjustment with select baseplates Stamped steel arm and cup with bright nickel finish Accepts hinge cup mounted soft closing device Impresso Series can be mounted on the job site with no tools. Impresso Series is compatible with 42mm or 45mm hinge boring equipment Description Qty SELF-CLOSE # Less Full FREE-SWING # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full Overlay 125 EA GRA138622500015 Half Overlay 125 EA GRA138622500815 Inset Hinge 125 EA GRA138604511515 42MM BORE DOWELED HINGES (GRASS PATTERN) Full Overlay 250 EA GRA138322740015 Half Overlay 250 EA GRA138322740815 42MM BORE SCREW-ON HINGES Full Overlay 250 EA GRA138322730015 Half Overlay 250 EA GRA138322730815 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full Overlay 250 EA GRA148322540015 GRA147322540015 Half Overlay 250 EA GRA148322540815 GRA147322540815 45MM BORE SCREW-ON HINGES Full Overlay 250 EA GRA148322530015 GRA147322530015 Half Overlay 250 EA GRA148322530815 GRA147322530815 ANGLE REDUCTION CLIP Qty Item # Less Full 85 Opening Angle Reduction Clip 1000 EA GRA641000109862 SOFT-CLOSE ABSORBERS FOR TOOL FREE MOUNTING TO HINGES Complete Soft Close Absorber for Nexis 125 EA GRA924200400215 Soft Close Adapter for Impresso (Need Damper) 125 EA GRA924200550015 Soft Close Damper for Impresso Adapter (Need Adapter) 125 EA GRA924012500142 For full inset applications use the half overlay hinge with an 8mm mounting plate GREEN BAY SUN PRAIRIE WEST SALEM p 800.236.0188 p 877.942.4400 p 800.879.8123 f 920.494.9410 f 608.834.2243 f 608.786.4044 PEKIN, IL p 800.879.9123 f 309.347.1133 Nexis Impresso Snap-on 110 Opening Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 www.amerhart.com A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-17
H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS NEXIS AND IMPRESSO SNAP-ON HINGES 125 OPENING Nexis and Impresso 125 Snap-On & Soft-Close Absorbers Tool-free hinge to baseplate connection and removal 3 dimensional adjustment: side, depth, and height Cam height and depth adjustment with select baseplates Stamped steel arm and cup with bright nickel finish Accepts hinge cup mounted soft closing device Impresso Series can be mounted on the job site with no tools. Impresso Series is compatible with 42mm or 45mm hinge boring equipment Description Qty SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full Overlay 125 EA GRA138629500015 42MM BORE DOWELED HINGES (GRASS PATTERN) Full Overlay 250 EA GRA138329740015 Half Overlay 250 EA GRA138329740815 42MM BORE SCREW-ON HINGES Half Overlay 250 EA GRA138329730815 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full Overlay 250 EA GRA148329320015 Half Overlay 250 EA GRA148329320815 45MM BORE SCREW-ON HINGES Full Overlay 250 EA GRA148329310015 SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES SOFT-CLOSE Complete Soft Close Absorber for Nexis 125 EA GRA924200400215 Soft Close Adapter for Impresso (Need Damper) 125 EA GRA924200550015 Soft Close Damper for Impresso Adapter (Need Adapter) 125 EA GRA924012500142 Nexis Impresso Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Download a Grass Nexis catalog at http://www.grassusa.com/downloads/grass_nexis.pdf H-18 MILWAUKEE p 800.642.1733 f 414.351.1668 MINNESOTA p 877.588.3192 f 877.588.3193 TRAVERSE CITY, MI p 877.700.5190 f 231.267.5329 ST LOUIS, MO p 800.533.7557 f 314.533.5730
GREEN BAY p 800.236.0188 f 920.494.9410 GRASS NEXIS AND IMPRESSO SNAP-ON HINGES 170 OPENING Nexis and Impresso 170 Snap-On & Soft-Close Absorbers Tool-free hinge to baseplate connection and removal 3 dimensional adjustment: side, depth, and height Cam height and depth adjustment with select baseplates Accepts hinge arm mounted soft closing device Impresso Series can be mounted on the job site with no tools. Impresso Series is compatible with 42mm or 45mm hinge boring equipment Description Qty SELF-CLOSE # Less Full FREE-SWING # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full Overlay 50 EA GRA138765650015 42MM BORE DOWELED HINGES (GRASS PATTERN) Full Overlay 50 EA GRA138765740015 Half Overlay 50 EA GRA138765740815 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full Overlay 50 EA GRA148765540015 Half Overlay 50 EA GRA148765540815 45MM BORE SCREW-ON HINGES Full Overlay 50 EA GRA148765530015 GRA147765530015 Half Overlay 50 EA GRA148765530815 ANGLE REDUCTION CLIP Qty Item # Less Full 120 Opening Angle Reduction Clip 125 EA GRA641000099862 SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES Complete Hinge Arm Mounted Soft-Close Absorber for 170 Nexis & Impresso 125 EA GRA924200461115 For full inset applications use the half overlay hinge with an 8mm mounting plate SUN PRAIRIE p 877.942.4400 f 608.834.2243 WEST SALEM p 800.879.8123 f 608.786.4044 PEKIN, IL p 800.879.9123 f 309.347.1133 Nexis Impresso Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Download a Grass Nexis catalog at http://www.grassusa.com/downloads/grass_nexis.pdf www.amerhart.com A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-19
H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS NEXIS & IMPRESSO SNAP-ON 95 OPENING THICK DOOR HINGE Nexis & Impresso 95 Snap-On Hinge for Thick Doors 3-dimensional adjustment with suitable base plate Soft-close compatible Accommodates overlays up to 19mm (3/4") Minimal gap dimensions on thick doors For door thicknesses up to 30mm (1-3/16") For face frame or frameless cabinets Door overlay max. Full Overlay Drilling distance (DD) 3 4 5 6 19 0 18 0 17 0 2 16 0 2 15 2 4 14 2 4 13 4 12 4 Base Plate Height (BPH) Half Overlay Drilling distance (DD) 3 4 5 6 11 8 10 8 9 8 10 8 8 10 7 10 12 6 10 12 5 12 Download a Grass Nexis catalog at http://www.grassusa.com/downloads/grass_nexis.pdf 4 12 Nexis Impresso Reveal Drilling distance (DD) Cup Drilling Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Description Qty SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full Overlay 125 EA GRA138605510015 42MM BORE DOWELED HINGES (GRASS PATTERN) Full Overlay 250 EA GRA138305740015 45MM BORE SCREW-ON HINGES Full Overlay 250 EA GRA148305530015 SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES Qty Item # Less Full Complete Soft Close Absorber for Nexis 125 EA GRA924200400215 Soft Close Adapter for Impresso (Need Damper) 125 EA GRA924200550015 Soft Close Damper for Impresso Adapter (Need Adapter) 125 EA GRA924012500142 For full inset applications use the half overlay hinge with an 8mm mounting plate Door overlay max. Base Plate Height (BPH) Use full overlay hinge with thick baseplates 3 4 5 6 16 0.1 0.1 0.1 0.1 18 0.2 0.2 0.2 0.2 19 0.3 0.3 0.3 0.3 20 0.4 0.4 0.4 0.4 22 0.7 0.7 0.7 0.7 24 1.0 1.0 1.0 1.0 26 1.4 1.4 1.4 1.4 28 1.9 1.9 1.9 1.9 30 3.8 2.9 2.6 2.5 Reveal min. (R) Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Door thickness (DT) H-20 MILWAUKEE p 800.642.1733 f 414.351.1668 MINNESOTA p 877.588.3192 f 877.588.3193 TRAVERSE CITY, MI p 877.700.5190 f 231.267.5329 ST LOUIS, MO p 800.533.7557 f 314.533.5730
Download a Grass Nexis catalog at http://www.grassusa.com/downloads/grass_nexis.pdf GREEN BAY p 800.236.0188 f 920.494.9410 GRASS NEXIS SNAP-ON 95 OPENING PROFILE DOOR HINGE Nexis 95 Snap-On Hinge with 40mm Cup for Profile Doors 3-dimensional adjustment with suitable base plate Accommodates overlays up to 23mm (7/8") Minimal gap dimensions on thick doors For door thicknesses up to 36mm Excellent weight capacity for heavy profile doors Special spring mechanism ensures excellent closing force on large doors For face frame or frameless cabinets Note: Requires a 40mm Bore Door overlay max. Full Overlay Drilling distance (DD) 3 4 5 6 7 8 9 10 11 23 0 22 0 2 21 0 2 20 0 2 4 19 0 2 4 18 0 2 4 17 0 2 4 16 0 2 4 15 2 4 14 2 4 13 4 Base Plate Height (BPH) See Pages B-26 & B-27 for Baseplates SUN PRAIRIE p 877.942.4400 f 608.834.2243 Half Overlay WEST SALEM p 800.879.8123 f 608.786.4044 PEKIN, IL p 800.879.9123 f 309.347.1133 Nexis Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP See Page B-30 For Hinge Arm & Hinge Cup Cover Caps Description Qty SELF-CLOSE # Less Full 48MM BORE SCREW-ON HINGES Full Overlay 125 EA GRA146425530015 Half Overlay 125 EA GRA146425530815 SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES Qty Item # Less Full Complete Soft Close Absorber for Nexis 125 EA GRA924200400215 For full inset applications use the half overlay hinge with an 8mm mounting plate Door overlay max. Drilling distance (DD) 3 4 5 6 7 8 9 10 11 15 0 14 0 2 13 0 2 12 0 2 4 11 0 2 4 10 0 2 4 9 0 2 4 8 0 2 4 7 2 4 6 2 4 5 4 Door thickness (DT) Reveal Drilling distance (DD) 3 4 5 6 8 10 20 0.1 0.1 0.1 0.1 0.1 0.1 22 0.2 0.2 0.2 0.2 0.2 0.2 24 0.3 0.3 0.3 0.3 0.3 0.3 26 0.4 0.4 0.4 0.4 0.4 0.4 28 0.6 0.6 0.6 0.6 0.6 0.6 30 0.8 0.8 0.8 0.8 0.8 0.8 32 2.1 1.1 1.1 1.1 1.1 1.1 34 4.2 3.1 2.3 1.6 1.4 1.4 36 6.5 5.2 4.2 3.5 2.2 1.7 Reveal min. (R) www.amerhart.com A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-21
H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS NEXIS SNAP-ON HINGES 65 OPENING PIE-CUT HINGES Nexis 65 Pie Cut Snap-On Tool-free hinge to baseplate connection and removal 3 dimensional adjustment: side, depth, and height Cam height and depth adjustment with select baseplates Zinc die cast arm and cup with bright nickel finish Used in conjunction with 170 148700 Series is a 45mm pattern, bore extends past the edge of the door 701 Series is a 42mm pattern that is bored away from the edge of the door 701 Series allows you to bore for the hinge cup without adjusting the machine fence 701 Series allows the doors to open straight from the cabinet, offset by the door thickness 701 Boring Pattern GRA148700010015 GRA7013906 701 Installation Dimensions 701 Function Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Description Qty SELF-CLOSE # Less Full 42MM BORE SCREW-ON HINGES Pie Cut Corner Hinge 25 EA GRA7013906 42MM BORE DOWELED HINGES (GRASS PATTERN) Pie Cut Corner Hinge 25 EA GRA7014006 45MM BORE SCREW-ON HINGES Pie Cut Corner Hinge 125 EA GRA148700010015 H-22 MILWAUKEE p 800.642.1733 f 414.351.1668 MINNESOTA p 877.588.3192 f 877.588.3193 TRAVERSE CITY, MI p 877.700.5190 f 231.267.5329 ST LOUIS, MO p 800.533.7557 f 314.533.5730
GREEN BAY p 800.236.0188 f 920.494.9410 GRASS NEXIS SNAP-ON 95 HINGES FOR BLIND CORNER CABINETS Nexis 95 Snap-On Blind Corner & Soft Close Absorbers Tool-free hinge to baseplate connection and removal 3 dimensional adjustment: side, depth, and height Cam height and depth adjustment with select baseplates Zinc die cast arm and stamped steel cup with bright nickel finish Accepts hinge cup mounted soft closing device Download a Grass Nexis catalog at http://www.grassusa.com/downloads/grass_nexis.pdf SUN PRAIRIE p 877.942.4400 f 608.834.2243 WEST SALEM p 800.879.8123 f 608.786.4044 PEKIN, IL p 800.879.9123 f 309.347.1133 Nexis Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Description Qty SELF-CLOSE # Less Full 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Inset Hinge 125 EA GRA148405129615 45MM BORE SCREW-ON HINGES Inset Hinge 125 EA GRA148405119615 SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES Qty Item # Less Full Complete Soft Close Absorber for Nexis 125 EA GRA924200400215 www.amerhart.com A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-23
H GRASS NEXIS SNAP-ON 95 OPENING POSITIVE ANGLE HINGES Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband Nexis 95 Opening +30 Angle Snap-on Corner Hinge 3-dimensional adjustment with suitable base plate Soft-close compatible Minimal gap dimensions on door thickness up to 30mm Description Qty SELF-CLOSE # Less Full 48MM BORE SCREW-ON HINGES +30 Overlay Hinge 125 EA GRA146405530215 SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES Qty Item # Less Full Complete Soft Close Absorber for Nexis 125 EA GRA924200400215 Overlay Nexis & Impresso 95 Snap-On +45 Corner & Soft-Close Absorbers 3-dimensional adjustment with suitable base plate Soft-close compatible For 45 positive angle corner cabinets Corner Angle Download a Grass Nexis catalog at http://www.grassusa.com/downloads/grass_nexis.pdf Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Description Qty SELF-CLOSE # Less Full 45-48MM BORE IMPRESSO TOOL-LESS HINGES +45 Overlay Hinge 125 EA GRA146705350315 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) +45 Overlay Hinge 125 EA GRA148405080315 45MM BORE SCREW-ON HINGES +45 Overlay Hinge 125 EA GRA148405060315 SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES Qty Item # Less Full Complete Soft Close Absorber for Nexis 125 EA GRA924200400215 Soft Close Adapter for Impresso (Need Damper) 125 EA GRA924200550015 Soft Close Damper for Impresso Adapter (Need Adapter) 125 EA GRA924012500142 H-24 MILWAUKEE p 800.642.1733 f 414.351.1668 MINNESOTA p 877.588.3192 f 877.588.3193 TRAVERSE CITY, MI p 877.700.5190 f 231.267.5329 ST LOUIS, MO p 800.533.7557 f 314.533.5730
GRASS NEXIS SNAP-ON 95 OPENING NEGATIVE ANGLE HINGES H Nexis 125 Snap-On -14 Corner & Soft Close Absorbers 3-dimensional adjustment with suitable base plate Soft-close compatible For 14 negative angle corner cabinets GREEN BAY p 800.236.0188 f 920.494.9410 SUN PRAIRIE p 877.942.4400 f 608.834.2243 WEST SALEM p 800.879.8123 f 608.786.4044 Overlay Download a Grass Nexis catalog at http://www.grassusa.com/downloads/grass_nexis.pdf Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Description Qty SELF-CLOSE # Less Full 48MM BORE SCREW-ON HINGES -14 Overlay Hinge 125 EA GRA146429141015 SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES SOFT-CLOSE # Complete Soft Close Absorber for Nexis 125 EA GRA924200400215 Nexis 125 Snap-On -45 Corner & Soft Close Absorbers 3-dimensional adjustment with suitable base plate Soft-close compatible For 45 negative angle corner cabinets Half Overlay Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Description Qty SELF-CLOSE # Less Full 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) -45 Overlay Hinge 125 EA GRA148429544515 SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES SOFT-CLOSE # Complete Soft Close Absorber for Nexis 125 EA GRA924200400215 PEKIN, IL p 800.879.9123 f 309.347.1133 www.amerhart.com A B C D E F G H I J K L M N Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-25