Conversion Tables. To Convert Multiply By To Obtain

Similar documents
Metric System Conversion Factors

Metric System Conversion Factors 1

Appendix C: Conversions and Calculations

Handout Unit Conversions (Dimensional Analysis)

Conversion Formulas and Tables

CONVERSION INFORMATION

Converting Units of Measure Measurement

INTERIM UNITS OF MEASURE As suggested by Federal Standard 376B January 27, hectare (ha) Hundred for traffic buttons.

REVIEW SHEETS INTRODUCTORY PHYSICAL SCIENCE MATH 52

APPENDIX I SI AND ENGLISH UNITS AND CONVERSION FACTORS

MEASUREMENTS. U.S. CUSTOMARY SYSTEM OF MEASUREMENT LENGTH The standard U.S. Customary System units of length are inch, foot, yard, and mile.

Measurement. Customary Units of Measure

Nursing 131 Household to Metric Conversion

Jones and Bartlett Publishers, LLC. NOT FOR SALE OR DISTRIBUTION.

Unit Conversions. Ben Logan Feb 10, 2005

One basic concept in math is that if we multiply a number by 1, the result is equal to the original number. For example,

Cattle Producer's Library - CL 1280 CONVERSIONS FOR COMMONLY USED WEIGHTS AND MEASURES

Chapter 2 Measurement and Problem Solving

MEASUREMENT. Historical records indicate that the first units of length were based on people s hands, feet and arms. The measurements were:

Conversion Factors. The following conversion tables are for your use: Conversion Tables and Formulas Decimal and Millimeter Equivalents of Fractions

Prealgebra Textbook. Chapter 6 Odd Solutions

Objective To introduce a formula to calculate the area. Family Letters. Assessment Management

METRIC CONVERSION TABLE Multiply By To Obtain Millimetres Inches Millimetres Feet Metres Feet Kilometres 0.

Measurement/Volume and Surface Area Long-Term Memory Review Grade 7, Standard 3.0 Review 1

Unit conversion problems, by Tony R. Kuphaldt (2006)

UNIT (1) MEASUREMENTS IN CHEMISTRY

DIMENSIONAL ANALYSIS #2

Metric Units of Weight and Volume

Healthcare Math: Using the Metric System

Charts (Section XI) Ph. (713) Fax (713) Main PAGE #

Preferred SI (Metric) Units

Imperial and metric quiz

Multiply circumference by Or divide circumference by Multiply diameter by Or divide diameter by

Calculating Area and Volume of Ponds and Tanks

Note: Because approximations are used, your answers may vary slightly from the answers given in the back of the book.

DEVELOPMENT OF STATEWIDE GIS-BASED FEATURES INVENTORY SYSTEM

Appendix 2 Metric Conversion Table

HFCC Math Lab General Math Topics -1. Metric System: Shortcut Conversions of Units within the Metric System

MOST COMMON METRIC UNITS USED IN THE MEDICAL FIELD *BASE. deci. King Henry Died (from a) Disease Called Mumps. (k) (h) (da) gram (g) (d) (c) (m)

EXAMPLE EXERCISE 3.1 Metric Basic Units and Prefixes

10 g 5 g? 10 g 5 g. 10 g 5 g. scale

Excel Invoice Format. SupplierWebsite - Excel Invoice Upload. Data Element Definition UCLA Supplier website (Rev. July 9, 2013)

Units of Measurement: A. The Imperial System

UNIT 1 MASS AND LENGTH

Don t Make Me Think: Essential Pharmacy Math for Pharmacy Technicians Made Easy

Metric Mania Conversion Practice. Basic Unit. Overhead Copy. Kilo units. Hecto units. Deka - 10 units. Deci - 0.

FCAT FLORIDA COMPREHENSIVE ASSESSMENT TEST. Mathematics Reference Sheets. Copyright Statement for this Assessment and Evaluation Services Publication

Pump Formulas Imperial and SI Units

BASIC MATH FORMULAS - CLASS I. A. Rectangle [clarifiers, ponds] I = length; w = width; A = area; area in square ft [sq ft]

The following book is required for purchase prior to the beginning of the semester:

GRADE 6 MATHEMATICS CORE 1 VIRGINIA STANDARDS OF LEARNING. Spring 2006 Released Test. Property of the Virginia Department of Education

Converting English and Metric Recipes

Chapter 8 Unit Conversions

Conversions between the common units of length used in the Imperial system are listed below 12 in = 1 ft 3 ft = 1 yard 1760 yards = 1 mile

How to Solve Drug Dosage Problems

Chapter 8 Unit Conversions

1. Metric system- developed in Europe (France) in 1700's, offered as an alternative to the British or English system of measurement.

Sample Questions Chapter 2. Stoker

Metric Prefixes Tera- T 10 2 centi- c 10 9 Giga- G 10 3 milli- m 10 6 Mega- M 10 6 micro- µ 10 3 kilo- k 10 9 nano- n

Practice Tests Answer Keys

Hand-held and Backpack Sprayers for Applying Pesticides

Drafting Terminology. Drafters. Drafting Technologists and Technicians

CHAPTER 2: MEASUREMENT AND PROBLEM SOLVING

Customary Culinary Units of Measure

Cooperative Extension Service The University of Georgia College of Agricultural and Environmental Sciences Athens

4.5.1 The Metric System

Appendix A: Units of Measure, Scientific Abbreviations, Symbols, Conversions, Variables, and Equations

milli centi deci deci hecto kilo. Explain that the same procedure is used for all metric units (meters, grams, and liters).

Conversion from customary to metric units (in alphabetical order).

Sorting Cards: Common Measures

ENGLISH CONTENT. Instructions for Using Your Computer Watch

Appendix 1: Units of Measure Used in the Lead-Based Paint Field

Conversions. 12 in. 1 ft = 1.

ABC & C 2 EP Formula/Conversion Table for Water Treatment, Distribution, & Laboratory Exams

$ What is the monthly interest rate on the account? (Round to the nearest hundredth of a percent.) 4 = x 12. 7)

Measurement: Converting Distances

MEASUREMENT CONVERSION CHARTS

CHEMICAL INVENTORY WORKSHEET INSTRUCTIONS

Section 1 Tools and Measurement

PESTICIDE RATE AND DOSAGE CALCULATIONS

Exercise Worksheets. Copyright Susan D. Phillips

Equivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Valve Sizing

Determining Amounts of Fertilizer for Small Areas

Measurement. Length. Inch pulgada (pulg) A customary unit for measuring length. The plural is inches. English Español

Lesson 18 Pythagorean Triples & Special Right Triangles

CHEMISTRY B- FACTOR LABEL PACKET NAME: HR: PAGE 1. Chemistry B. Factor Label Packet

Grade 4 Mathematics Measurement: Lesson 3

Units of Measurement and Conversions

hp calculators HP 33S Unit Conversions Metric units and Imperial units Conversion keys Practice working problems involving conversions

= 800 kg/m 3 (note that old units cancel out) J 1000 g = 4184 J/kg o C

Fractions. 1/ 2 a / one half 1/ 3 a / one third 1/ 4 a / one quarter (AmE also. 2 use over over

(amount of salt in) (amount of salt out),

Grade 6 FCAT 2.0 Mathematics Sample Questions

MATHEMATICAL EXCURSIONS Math and the Tourist

Transcription:

Conversion Tables To Convert Multiply By To Obtain Acre-feet Acre-feet Acre-feet Bushels (dry) (cm) cm/sec cm/sec cm (cubed) Cup (ft) per minute head of water Foot candle Gallons (gal) Gal Gal Gal/acre Gal/acre Gal/00 ftsquared Gal/minute Grams (g) Gram G/ha Grams per liter Grams per liter Grams/sq.meter 43,560 0.00405 4047 4840 325,851 43560 1233.5 14.5 19.7 29.53 0.03524 0.03281 0.3937 0.94 0.01 1.9685 0.0223694 0.06237 0.0283 7.4805 1728 0.037 8 30.48 0.3048 0.01136 0.433.764 3.785 3785 128 9.354 2.938 4.0746 2.228 x (-3) 0.002205 0.035274 0.000893 00 0.00020481 Sq. kilometer Sq. meter Sq. yards Cu. feet m (cubed) Lb/sq.in. g/cm (cubed) inches Hg at 0 degrees C msquared (ml) ft/min inch (cubed) Cu. meter Gallons Cubic inches Cubic yards fl oz Lux Ounces (liquid) /hectare Oz/00 ftsquared (liquid) L/0 msquared /second oz lbs/a Percent lb/sq.feet

G/cm (cubed) G/cm (cubed) Hectares (ha) Insquared In (cubed) 0.036127 62.428 2.471 2.540 0.0254 25.40 6.4516 16.3871 lb/in (cubed) lb/ft (cubed) cmsquared cm (cubed) Kilograms (kg) Kg/hectare Kg/ha Kg/L (Km) Km/h Km/h Kilopascals (kpa) (l) L/0 msquared /hectare (m) /sec Msquared M (cubed) M (cubed) (statute) /hour (mph) /hour /hour /hour 2.2046 0.892 0.02048 8.3454 0,000 3281 00 0.6214 94 0.62137 54.6807 0.145 0.2642 33.814 2.113 1.057 0.2454 0.7 3.281 39.37 1.094 0 0.001 00 2.2369.764 35.3147 1.30795 160,900 5280 1.609 1760 1.467 88 1.61 0.447 /acre lb/00 ftsquared lb/gal ft/min /sq.in. (psi) Gallons Ounces Pints Quarts gal/00 ftsquared Gallons/acre yards ftsquared ft (cubed) yd (cubed) /second /minute /hour meter/second

Milliliters (ml) Milliliters (mm) 1 mm Hg @ 0 C Ounces (fluid) Ounces (fluid) Ounces (weight) Parts per million (ppm) Percent (%) Pint pt/a pt/a 0.0338 0.0002642 0.03937 0.13332 0.02957 29.573 28.35 2.719 0.001 8.34 1 0.013 0.3295 8.345 0.473 1.1692 0.3673 Ounces (fluid) Gallons kpa Milliliters Grams lb ai/acre foot of water Grams/l Lb/million gal mg/kg Ounces/0 gal of water Gal/acre-foot of water lbs/million gal of water g/kg liter L/ha oz/00 ftsquared /acre /A /sq.ft. /00 ftsquared /yd (cubed) /gallon (lbs/sq.in.) Quarts Qt/A Qt/A Sq. inch Ton (2000 lbs) 0.4536 453.6 1.12 0.02296 4883 43.5597 0.0005937 0.12 6.9 0.06895 0.068046 2.31 6.89 0.9463 2.3385 0.7346 0.0076 0.1550 929 0.0929 9.294 x (-6) 6.452 907 91.44 0.9144 914.4 Kilograms Grams Kg/hectare lb/00 ftsquared Grams/sq.meter lb/a G/cm (cubed) Kg/liter Kilopascals atm feet head of water kpa L/ha oz/00 ftsquared Sq. inches Sq. meters Hectares kg

yd (cubed) yd (cubed) 27 0.7645 ft (cubed) m (cubed) Area Equivalents 1 acre = 43,560 ft squared = 4840 yd 2 = 0.4047 hectares = 160 rods squared = 4047 m 2 = 0.0016 sq. mile 1 acre-inch = 2.8 m 3 = 27,154 gal = 3630 ft 3 1 hectare (ha) =,000 m 2 = 0 are = 2.471 acres = 7,639 ft squared 1 cubic foot (ft 3 ) = 1728 in 3 = 0.037 yd 3 = 0.02832 m 3 = 28,320 cm 3 1 square foot (ft 2 ) = 144 in 2 = 929.03 cm 2 = 0.09290 m 2 1 square yard (yd 2 ) = 9 ft 2 = 0.836 m 2 1 cubic yard (yd 3 ) = 27 ft 3 = 0.765 m 3 Units Sq. In. Sq. Ft. Sq Yd. Sq. cm Sq. m Sq. In. 1 0.006944 0.0007716 6.452 0.000645 Sq. Ft. 144 1 0.1111 929 0.0929 Sq Yd. 1296 9 1 8361 0.8361 Sq. cm 0.155 0.0076 0.0001196 1 0.0001 Sq. m 1550.76 1.196,000 1 Liquid Equivalents 1 ft (cubed) of water = 7.5 gal = 62.4 lbs. = 28.3 liters 1 acre-inch of water = 27,154 gal = 3630 ft 3 1 liter (l) = 2.113 pts. = 00 ml = 1.057 qts. = 33.8 fl.oz. = 0.26 gal 1 US gallon=4 qt.=8 pt. = 16 cups = 128 fl.oz. = 8.337 lbs of water = 3.785 L = 3785 ml = 231 in 3 = 256 tbsp. = 0.1337 ft3 1 quart = 0.9463 liters = 2 pt. = 32 fl. oz. = 4 cups = 64 tablespoons (tbsp.)=57.75 in 3 = 0.25 gal = 946.4 ml 1 pint = 16 fl. oz. = 2 cups = 473.2 ml = 32 level tablespoons = 0.125 gal = 0.5 qt 1 cup = 8 fl. oz. = = ½ pt. = 16 tablespoons = 236.6 ml 1 tablespoon = 14.8 ml = 3 teaspoons (tsp.) = 0.5 fl.oz. 1 milliliter (ml) = 1 cm 3 = 0.34 fl.oz. = 0.002 pts 1 teaspoon = 4.93 ml = 0.1667 fl. oz. = 80 drops 1 US fluid ounce = 29.57 ml = 2 tablespoons = 6 tsp. = 0.03125 qt Temperature Equivalents degrees Centigrade = ( F-32)x5/9 degrees Fahrenheit = ( Cx9/5)+32 Pressure Equivalents

1 lb per square inch () = 6.9 kilopascal (kpa) 1 = 2.31 feet head of water Units Dyne Lb. Newton Dyne 1 2.248x-6-5 Lb. 444,823 1 4.448 Newton 0,000 0.2248 1 Length Equivalents centimeter (cm) = 0.3937 inch = 0.01 m = 0.03281 ft. meter (m) = 3.28 feet = 39.4 inches = 0 cm = 1.094 yds = 00 mm kilometer = 0.621 statute mile = 00 meters = 0,000 cm = 3281 ft = 39,370 in. inch = 2.54 cm = 25.4 mm = 0.0254 m = 0.08333 ft. foot = 0.3048 meters = 30.48 cm = 12 inches yard = 0.9144 meters = 3 feet = 36 inches = 91.44 cm statute mile = 1760 yards = 5280 feet = 1.61 kilometers = 1609 meters Mixture Ratios 1 mg/g = 00 ppm 1 fl.oz./gal = 7490 ppm 1 fl.oz./0 gal = 75 ppm 1 pt/0 gal = 1 teaspoons/1gal 1 qt/0 gal = 2 tablespoons/1 gal Flow 1 gpm = 0.134 ft 3 /minute 1 ft (cubed) /min. (cfm) = 449 gal/hr. (gph) = 7.481 gal/min. Weight Equivalents 1 ton (US) = 2000 lb = 0.907 metric tons = 907.2 kg 1 metric ton = 6 g = 00 kg = 2205 lb 1 lb = 16 oz = 453.6 grams (g) = 0.4536 kg 1 oz (weight) = 28.35 g = 0.0625 lb 1 gram = 00 mg = 0.0353 oz = 0.001 kg = 0.002205 lb milligrams (mg) = 0.001 grams 1 kilogram (kg) = 00 grams = 35.3 oz = 2.205 lbs microgram (mg) = -6 grams = 0.001 mg nanogram (ng) = -9 grams = 0.001 micrograms (mg) picogram = -12 grams 1 ppm= 0.0001%= 0.013 fl oz in 0 gal =1 mg/kg=1 mg/l=1 mg/g= 0.379 g in 0 gal water= 8.34 x -6 lb/gal=1ml/l ppm = 0.001% = mg/l 0 ppm = 0.01% = 0 mg/l00 ppm = 1mg/g = 0.1% = 00 mg/l

1 ppb = 1 mg/kg or 1 mg/l or 1 ng/g 1 ppt = 1 picogram/g 1 % =,000 ppm = g/l = 1g/0ml = g/kg = 1.33 oz by weight/gal water = 8.34 lbs/0 gal water Leather Substance The measurement of the thickness of a finished leather, in millimeters (1 mm. = 0.03937 inch), irons (1 iron = 1/48 inch), ounces (1 ounce = 1/64 inch): Inch Ounces Irons 1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 1 2 3 4 5 6 7 8 9 11 12 13 14 15 16 17 18 0.75 1.5 2.25 3.0 3.75 4.5 5.25 6.0 6.75 7.5 8.25 9.0 9.75.5 11.25 12.0 12.75 13.5 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 5.2 5.6 6.0 6.4 6.8 7.2