BLOCK + STONE RESOURCE GROUP INC. Natural Stone Standard Product List 2010 From the Quarry to the Job Site. PRODUCTS DESCRIPTION PAGE Building Wall Stone Sawn Bed Masonry P.2 Building Wall Stone Natural Bed Masonry P.3 Thin Veneer Stone Quarried and Gauged Stone Veneers P.4 P.5 Cut Stone Architectural Limestone Details P.6 Pavers, Treads, Copings Cut Stone Pavers, Treads & Copings P.7 Flagstone & Steps Random Flag, Square Flag & Steps P.8 Slabs, Tiles & Wall Panels Smooth, Honed, Polished, Textured P.9 Mosaic Tiles Small Mosaics on Mesh Backing P.10 Contact Info Additional Products and Services P.11 BLOCK AND STONE RESOURCE GROUP INC., 619 10th Street West, Owen Sound, ON N4K 3R8 General Office T.519 416 7625 F.519 416 7626 info@bsrg.ca www.bsrg.ca Contact: Steve McCallum, Cell 519 270 6602, smccallum@bsrg.ca 1
BUILDING WALL STONE Sawn Bed Wall Stone Sawn course heights available in 2 ¼, 5, 7 ¾ and 10 ½. Bed depths of 4 or 8 material. Random lengths with broken ends. INDIANA Sawn and Split Coursing ERAMOSA Sawn and Split Coursing AMABEL Sawn and Split Coursing GUELPH Sawn and Split Coursing PRODUCT NAME BED HEIGHTS BED DEPTH LENGTHS SQUARE FT. INDIANA Sawn & Split 2-1/4, 5, 7-3/4, 10 4 8 to 24 35 SF/TON ERAMOSA Sawn & Split 2-1/4, 5, 7-3/4, 10 4 8 to 24 35 SF/TON AMABEL Sawn & Split 2-1/4, 5, 7-3/4, 10 4 8 to 24 35 SF/TON GUELPH Sawn & Split 2-1/4, 5, 7-3/4, 10 4 8 to 24 35 SF/TON 2
BUILDING WALL STONE Natural Bed Wall Stone Natural rough top and bottom bed surfaces not sawn. The split face bed heights are available in 2 to 10 high. Random lengths range from 8 to 24 on average. Buff, Brown, Grey colour ran ge. Buff Grey Mix Natural Bed Layers Buff Grey Mix and Random Shaped 5 Pt. Grey Only PRODUCT NAME BED HEIGHTS BED WIDTH LENGTHS SF COVERAGE Natural Bed Buff Grey 2-10 4 8 to 24 40 SF/TON Natural Bed Buff Grey 2-10 8 8 to 24 20 SF/TON 3
THIN VENEER STONE Wiarton Ontario Quarried Limestone Thin stone made from quarry-extracted limestone. Machine shaped and gauged to a THIN, easy to install masonry veneer. Use in place of cultured or man-made materials for the ultimate design build. Nothing beats real stone. Cost effective. Priced equal to or less than concrete or man -made materials. The veneer units are 1 thin plus/minus. The products are made from high-density dolomite limestone of the best quality. EBEL NATURAL STONE TM THIN VENEER WIARTON Bown and Grey WIARTON Drystack ALGONQUIN Sandblast Panels WIARTON Exterior Faded WIARTON Brown and Grey BLACK Mixed with Natural Face CORNERS - Corners are available for each stone except Natural Surface PRODUCT NAME BED HEIGHTS THINNESS LENGTH 1 CRATE CRATE LBS. WIARTON Brown Grey 2-8 1 + - 12 + - 180 SF 2,200 LBS ALGONQUIN Sandblast 2 8 1 + - 12 + - 180 SF 2,200 LBS ERAMOSA Sandblast 2 8 1 + - 12 + - 180 SF 2,200 LBS NATURAL FACE 2 8 1 + - 12 + - 180 SF 2,200 LBS CORNERS 90 2 8 1 + - 12 + - MAKING HISTORY WITH GENUINE STONE. TM 4
THIN VENEER STONE Import Collection V SERIES Quarried Limestone Thin stones from our import collection. These stone types are selected for the rare gold-buff colour not typically found locally or regionally. The Silver Shadow limestone is an alternate choice to Indiana limestone with distinct veining of it s own. STRATA NATURAL BED STRATA SAWN BED PRAIRIE DRY STACK PRAIRIE BLEND SILVER SHADOW CORNERS PRODUCT NAME BED HEIGHTS THINNESS LENGTHS SQUARE FT./TON STRATA Nat Bed 1-1/2 9 1 + - 12 160 SF STRATA Sawn Bed 2, 4, 5 and 8 1 + - 12 160 SF PRAIRIE Dry Stack 1-1/2 9 1 + - 12 160 SF PRAIRIE Blend 1-1/2 9 1 + - 12 160 SF SILVER SHADOW 2, 5 and 8 1 + - 12 160 SF CORNERS 90 & 135 Matching 1 + - 12 160 SF 5
ARCHITECTURAL DETAILS Natural limestone details. Our Manufactured Stone Units are design -build friendly and easy to install. Cost effective. Use standard dimensions and lengths to achieve a total custom look. 100% natural limestone quarried for dimensional quality. Call for design assistance, budget control, ordering and delivery to your project. Manufactured Stone Units Standard mill run products for cost savings or fully serviced custom work. The difference is choice. Our highly specialized stone service can save value where it is possible and add value where it is important. TYPICAL ARCHITECTURAL DETAILS SILLS COPINGS PIER CAPS KEYSTONES BANDING WATERCOURSE SMOOTH WALL PANELS DECORATIVE PANELS QUOINS BALLUSTRADE COLUMNS ACCENT DETAILS SPHERES 6
PAVERS Square Cut Pavers made from high-density Ontario limestone. Hard wearing paving for exterior landscape applications. Suitable for thicker interior floorings, vertical wall cladding and fireplace surrounds. Durable hard wearing natural limestone. Machine textured for a slightly rougher non-slip surface. 12x12 12x18 12x24 12x30 12x36 18x18 18x24 18x30 24x24 Textured Ontario Limestone Pavers ERAMOSA Bushhammer SENESUN Bushhammer ERAMOSA Sandblast Amabel Bushhammer STONE TYPE FINISH THICKNESS SIZE COMBINATIONS ERAMOSA BUSHHAMMER 1.125 OR 2 12, 18, 24, 30 ERAMOSA SANDBLAST 1 OR 2 12, 18, 24, 30 SENESUN BUSHHAMMER 1.125 OR 2 12, 18, 24, 30 SENESUN SANDBLAST 1 OR 2 12, 18, 24, 30 AMABEL BUSHHAMMER 1.125 OR 2 12, 18, 24, 30 AMABEL SANDBLAST 1 OR 2 12, 18, 24, 30 TREADS & COPINGS (Steps on PG.8) TREADS RISERS COPINGS 2 thick 1 thick 2 thick 7
FLAGSTONE SQUARE CUT and RANDOM FLAG Natural surface dolomite. High-density, hard wearing limestone. Famous for endurance and natural beauty. COLOURS MIXED BLEND SQUARES RANDOM FLAG STONE TYPE THICKNESS NOMINAL SIZE MIX BUFF SQUARES ¾, 1 to 1/14, 1 ½, 2 12, 18, 24, 30 BLACK SQUARES ¾, 1 to 1/14, 1 ½, 2 12, 18, 24, 30 MIXED BLEND SQUARES ¾, 1 to 1/14, 1 ½, 2 12, 18, 24, 30 RANDOM FLAG ¾, 1 to 1/14, 1 ½, 2 RANDOM SHAPES NATURAL SURFACE STEPS PALLETS 3 ½ TO 7 ½ THICK STEPS 8
SLABS, TILES AND WALL PANELS Ontario Honed and Polished Limestone. High-density Dolomite. ERAMOSA Fleuri Cut ERAMOSA Fleuri Cut ERAMOSA Vein Cut ERAMOSA Fleuri Cut Honed or Polished Sandblasted Honed or Polished Bushhammered SENESUN Fleuri SENESUN DARK Fleuri SENESUN Vein SENESUN Fleuri Honed Honed Honed Bushhammered SENESUN Fleuri MARA Fleuri SILVERWATER Fleuri SILVERWATER Vein Sandblasted Honed Honed Honed PRODUCT DIMENSIONS FINISHES TILE STANDARD 3/8 THICK X 12 X 12 SMOOTH, HONE, POLISH SANDBLAST TILE CUSTOM LARGE FORMAT SIZES SMOOTH, HONE, POLISH SANDBLAST SLABS 2 CM AND 3 CM THICK SMOOTH, HONE, POLISH SANDBLAST WALL PANELS 38mm THICK SMOOTH, HONE, SANDBLAST BUSHHAMMER WALL PANELS 90mm THICK SMOOTH, HONE, SANDBLAST BUSHHAMMER 9
MOSAICS Ontario Honed and Polished Limestone. High-density Dolomite. Mesh backing. ERAMOSA FLEURI 1X1 SILVERWATER 1X1 SENESUN 1X1 ERAMOSA VEIN 1X3 ERAMOSA FLEURI 1X3 SILVERWATER 1X3 ERAMOSA FLEURI 2X2 SILVERWATER 2X2 ERAMOSA VEIN (BASKET WEAVE) 10
ADDITIONAL PRODUCTS Products Not Shown in Guide CUSTOM CUT STONE PRODUCTS RETAINING WALL ARMOUR STONE DRYWALL WEB WALL (5PT.) FIREPLACE SURROUNDS POOL COPINGS AND CORNERS ROCKERY LANDSCAPE BOULDERS ADDITIONALS SERVICES CUSTOM CUT STONE SUPPLY ARCHITECTURAL DRAFTING PROJECT MANAGEMENT CLIENT REPRESENTATION STONE CONSULTING MATERIAL SPECIFICATION ASSISTANCE TECHNICAL SUPPORT ESTIMATES AND QUOTATIONS LOGISTICS CONTACT INFORMATION BLOCK AND STONE RESOURCE GROUP INC. 619 10th Street West Owen Sound, Ontario, Canada N4K 3R8 t. 1-519 416 7625 f. 1-519 416 7626 email: info@bsrg.ca website: www.bsrg.ca Steve McCallum Sales and Marketing T. 1-519 416 7625 F. 1-519 416 7626 C. 1-519 270 6602 email: smccallum@bsrg.ca Andrew Negus President T. 1-519 416 7625 F. 1-519 416 7626 email: anegus@bsrg.ca 11