TTK DIAGNOSTIC MONITORS

TTK DIAGNOSTIC MONITORS Greyscale and colour diagnostic displays Resolution of 2 to 15 megapixels with ISD Five-year diagnostic guarantee Calibrated automatically in the network

TOTOKU DIAGNOSTIC MONITORS TOTOKU is a leading global manufacturer of medical monitors. TOTOKU has been producing reliable and innovative displays and workstations since 1972. CERTAINTY THROUGH INNOVATION Continuous further development allows TOTOKU to ensure even greater certainty in primary diagnostics along with technological progress in the medical imaging market. As well as equipping the diagnostic monitors with innovative technical features, TOTOKU also provides a diagnostic guarantee for up to five years. This ensures maximum investment security for diagnostic monitors with lutions of 2, 3 and 5 resomegapixels. THREE SENSORS FOR STABILITY TOTOKU colour monitors are ultra bright and rich in contrast. Thanks to ISD, TOTOKU greyscale monitors are able to reach a resolution of up to 15.7 megapixels. Color Monitor Grayscale Monitor All TOTOKU i2 models have a reliable stabilisation system: Three sensors continuously monitor all important parameters and ensure that image reproduction is always stable. Not only is the temperature measured inside the display; the current brightness of the display is also measured. The brightness in the room is also monitored. The measurements are monitored and recorded using the PM- MEDIVISOR. This software is optionally available. ISD TECHNOLOGY CT / MR PET / CT Stabilisation sensors Thorax CR TOTOKU diagnostic monitors are used in a variety of applications. These include mammography, CT, MRT, PET and angiography. Angio ISD (Independent Sub-pixel Drive) technology allows the sub-pixels of greyscale displays to be controlled independently of each other. This is a revolution for diagnostic monitors as it allows the resolution of a display to be tripled. For example, ISD turns a 2 MP display into a 6 MP display. ISD provides substantial cost savings while improving quality. ISD is optionally available for most greyscale monitors and can also be activated later. 2 Further information on this product can be found on the Internet

INTELLIGENT, RELIABLE, UNIQUE! LED BACKLIGHT The latest generation of TOTOKU monitors is equipped with an LED backlight. The LED backlight ensures a better and more consistent illumination of the entire display in the CCL 258i2, CCL 358i2, CCL 650i2 and MS55i2 models. The power consumption of these monitors is also reduced by around 20% compared to models with conventional lighting. 6 Megapixel TOTOKU colour monitors can display even the finest details in sharp clarity with a resolution of up to 6 MP. BACKLIGHT WITH SELF- PROTECTION The Backlight-Lifetime-Extender is additional software that extends the lifetime of the background light. When the display is not in use, the backlight switches to a particularly resource-conserving operating mode. In contrast to normal screensavers, the display always remains ready for use. COLOUR MONITORS WITH HIGH BRIGHTNESS The new CCL 650i2, CCL 258i2 and CCL 358i2 colour monitors achieve a brightness of up to 950 cd/m2. The devices are precalibrated at the factory to 410 and 300 cd/m2. Thanks to the high level of brightness, these models can be used for Class A diagnostics. 2048 GREYSCALES AT NO EXTRA COST A patented technology makes it possible for the first time to display up to 2048 greyscales (= 11 bits) simultaneously with TOTOKU monitors. Provided that your viewing software (PACS) supports this technology, you can save the cost of purchasing expensive graphic cards without compromising on quality. optional ISD-Technologie LED Backlight 1800 cd/m² ISD increases the visible resolution of greyscale monitors to up to 15 megapixels. The new LED backlight ensures an even more consistent illumination of the display surface. The luminance of up to 1800 cd/ m2 provides sufficient reserves to significantly extend the lifetime of the monitors. Uniformity Correction ensures uniform brightness over the entire display. UNIFORMITY EQUALIZER The uniformity equalizer ensures excellent brightness distribution over the entire display surface and even eliminates minimal fluctuations in luminance. In the case of colour monitors, the uniformity equalizer also provides an even distribution of colours over the entire screen. Of course, each display is measured and calibrated at the factory prior to delivery. A major benefit of TOTOKU monitors is that the user can repeat this calibration themselves as often as required using the optional CAL012 calibration set. This guarantees a consistent brightness distribution, even after years of use. Uniformity Energy saver New models featuring an LED backlight reduce power consumption by over 20% while providing better illumination. Visit us at: www.reinmedical.com 3

A PERFECT PICTURE EVEN AFTER YEARS Software and hardware work hand in hand in TOTOKU monitors. The Medivisor software automatically detects the available sensors, finding both integrated and optional sensors. CALIBRATION: SIMPLE AND AUTOMATIC The many years of experience that TOTOKU has in producing monitors for the medical industry is also reflected in the company s MEDIVISOR NX calibration software. The software automatically detects the monitor type and available sensors. No program wizard or manual input is required to perfectly calibrate a monitor. All it takes is two clicks to perform the calibration and optimally adjust the monitor. An icon in the user interface info area indicates the current status of the monitor in real time. This provides greater diagnostic certainty and consistent image quality without the user having to think about maintenance intervals. All values measured during the calibration are represented graphically and archived. Three different sensors permanently monitor the status of i2 models. ACCEPTANCE AND CONSTANCY TESTING All TOTOKU monitors connected to the network are calibrated centrally. Sensors integrated The German X-Ray Regulation (Röntgenverordnung) requires the users of diagnostic monitors to carry out regular acceptance and constancy tests in accordance with DIN V 6868-57. For this purpose, the QA MEDIVISOR works hand in hand with the MEDIVISOR NX: The calibration reports are obtained from here and the required test reports are created in PDF format. Remote calibration REMOTE CALIBRATION Acceptance and constancy testing in accordance with DIN V 6868-57 and AAPM TG18. Greyscale calibration according to GSDF/DICOM Part 14 Reports generated during calibration can be saved as PDF files. They can be viewed and printed at any time. DIN 6868-57V Constancy Testing DICOM PDF-Reporting The optional PM MEDIVISOR goes one step further: All TOTOKU i2 series monitors located on the network are calibrated and verified remotely and automatically. This is carried out completely autonomously and is fully time-controlled. It is no longer necessary to perform the calibration on site. Measures that are carried out include: Central control of all monitor information Remote calibration according to GSDF/DICOM Part 14 Remote monitoring of monitor values Automatic notification by e- mail Generation of PDF reports MS 33i2 4 Further information on this product can be found on the Internet

SERVICE AND QUALITY FROM TOTOKU INTEGRATED LUT (LOOK-UP TABLE) Conventional monitors usually work with 8 bits per colour channel and can therefore only display 256 greyscales. TOTOKU, on the other hand, uses special greyscale displays that can represent up to 3826 different greyscales (= 11.9 bits). The look-up table with up to 3826 greyscales provides a balanced display of diagnostic images. A look-up table (LUT) is used to adapt this incredible range of shades to human sight. This takes place in accordance with the DICOM standards. The result: An excellent, balanced and homogenous greyscale gradient. HARDWARE PIVOT FUNCTION The pivot function of a monitor allows you to rotate the screen by 90 in order to switch from portrait mode to landscape format. This rotation requires that the respective screen format on the computer is converted (for example, from 1920 x 1200 to 1200 x 1920). Many monitors offer a software solution for this. CCL358I2 However, the solution usually requires a lot of computing power and slows down the display of images. In the hardware pivot function featured in TOTOKU monitors, the display of images is equally fast in both modes and responds to changes of mode at lightning speed. DUAL MONITORS Due to production-related reasons, it is not possible to completely avoid variations in the colour temperature of different greyscale monitors. As two monitors are often used side by side in medical imaging, it is particularly important that screens have identical reproduction values. 11.9 LUT Hardware Pivot Matched Pair Option Calibration Kit Protective Filter TOTOKU monitors feature a position sensor that automatically identifies whether the device is operated in portrait or landscape format. TOTOKU monitors can be ordered in pairs. The display of images in these monitors is particularly well harmonised. An optional calibration kit is available for monitors that do not have integrated sensors. An invisible protective filter protects the display from scratches and can be replaced at any time. TOTOKU offers to synchronise monitor pairs before they are delivered. This results in perfect and symmetrical colour reproduction on both monitors. For more information on the technical details of TOTOKU diagnostic monitors, please visit our website: Visit us at: www.reinmedical.com 5

COLOUR MONITORS TECHNICAL DATA CCL210 Available from September 2014 CCL230 CCL242 CCL 256i2 CCL 258i2 CCL 352i2 CCL 356i2 CCL 358i2 CCL 650i2 Application Colour monitor with a 21.3" diagonal, resolution of 2 megapixels and greyscale calibration according to DICOM Part 14. 19.6" monitor with a 2 MP resolution. With up to 700 cd/m 2, it is suitable for X-ray diagnostics. Diagnostic monitor with high brightness, good contrast and a very wide viewing angle. Ultra bright 2 MP monitor that knows how to convince with its colour and greyscale diagnostic images. 20.8" diagnostic monitor with a 3 MP resolution. Excellent display quality and many service options. High luminance and exceptional contrast enable colour and greyscale diagnostics on this 3 MP monitor. With 6 MP and a diagonal of more than 76 cm, the CCL 650i2 offers a screen area that is equivalent to two monitors but requires considerably less space. Display Technology LED backlight Yes No Yes CCL 256i2: No CCL 258i2: Yes No CCL 356i2: No CCL 358i2: Yes Display size 21.3" (54 cm) 19.6" (49.8 cm) 24.1" (61.1 cm) 21.3" (54 cm) 20.8" (53.0 cm) 21.3" (54.1 cm) 30" (76.1 cm) Resolution (native) 1600 x 1200 (2 MP) 1200 x 1600 (2 MP) 1920 x 1200 (2.3 MP) 1200 x 1600 (2 MP) 1536 x 2048 (3.1 MP) 1536 x 2048 (3.1 MP) 3280 x 2048 (6 MP) Pixel pitch 0.27 mm x 0.27 mm 0.249 mm x 0.249 mm 0.27 mm x 0.27 mm 0.27 mm x 0.27 mm 0.207 mm x 0.207 mm 0.2115 mm x 0.2115 mm 0.197 mm x 0.197 mm Colour reproduction via DVI-D Colour reproduction via DisplayPort Number of greyscales LUT: 1.1 billion colours LUT: 68 billion colours LUT: 68 billion colours LUT: 68 billion colours 1.1 billion colours 1.1 billion colours 256 from a palette of 1021 greyscales 256 256 1024 via DisplayPort 256 1024 via DisplayPort Yes LUT: 68 billion colours CCL 256i2: 950 cd/m Maximum brightness 440 cd/m 2 700 cd/m 2 300 cd/m 2 2 650 cd/m CCL 258i2: 900 cd/m 2 800 cd/m 2 800 cd/m 2 2 Factory calibration 180/200 cd/m 2 410 cd/m 2 150 cd/m 2 300/410 cd/m 2 250 cd/m 2 300/410 cd/m 2 300/410 cd/m 2 Contrast ratio 1500:1 1000:1 1000:1 Viewing angle h: 178 / v: 178 h: 170 / v: 170 h: 178 / v: 178 Stabilisation Backlight lifetime at defined brightness *1 λ-sentinel (integrated λ-sentinel (integrated λ-sentinel (integrated CCL 256i2: 900:1 CCL 258i2: 1400:1 CCL 256i2: h: 170 / v: 170 CCL 258i2: h: 176 / v: 176 λ-sentinel II (integrated 600:1 h: 170 / v: 170 λ-sentinel II (integrated CCL 356i2: 750:1 CCL 358i2: 1400:1 CCL 356i2: h: 170 / v: 170 CCL 358i2: h: 176 / v: 176 λ-sentinel II (integrated 1000:1 h: 170 / v: 170 25,000 h 40,000 h 200 cd/m 2 320 cd/m 2 300 cd/m 2 320 cd/m 2 320 cd/m 2 Protective filter No No No Yes Yes Yes No Portrait function Yes Yes No Yes Yes Yes No Connections λ-sentinel II (integrated Signal inputs DVI-I (1.0), DisplayPort DVI-D (1.0), VGA, VGA USB hub General device data Power consumption 42 W 120 W 60 W CCL 256i2: 120 W CCL 258i2: 75 W Power save mode Yes Yes Yes Yes Yes Yes Power supply Dimensions in landscape mode Dimensions in portrait mode Tabletop stand functions W: 473 H: 476.4-537.9 D: 220 W: 377 H: 524.4-585.9 D: 220 W: 420 H: 404.7-456.2 D: 220 W: 340 H: 508.9-560.3 D: 220 W: 561 H: 467-529 D: 220 Tilt, turn W: 474 H: 468.4-529.9 D: 220 W: 367 H: 521.9-583.4 D: 220 130 W W: 474 H: 468.4-529.9 D: 220 W: 367 H: 521.9-583.4 D: 220 CCL 356i2: 120 W CCL 358i2: 80 W W: 474 H: 471.4-532.9 D: 220 W: 367 H: 524.9-586.4 D: 220 Mounting 100 mm VESA Standard 100 mm VESA Standard 100 mm VESA Standard 100 mm VESA Standard 100 mm VESA Standard 100 mm VESA Standard Anti-theft device Yes Yes Yes Yes Yes Yes Weight with base Weight without base Conformity 10.7 kg 6.5 kg 11.6 kg 8.1 kg TBA UL60601-1, CSA C22.2 N601.1 Part1, FCC Part15 Subpart J Class B, DOC Class B MDD/CE (EN5011, EN60601-1-2) VCCI Class B 11.1 kg 6.9 kg CE, ANSI/ AAMI ES60601-1(2005)+A1(2012), CAN/CSA-C22.2 N O. 60601-1(2008), FCC-B, ICES-003-B, CE, VCCI-B Approx. 8 kg CE, UL60601-1, CSA C22.2 No. 601.1, MDD/ CE, FCC-B, VCCI-B, RoHS, FDA510(k) 11 kg 6.8 kg CE, UL60601-1, CSA C22.2 No. 601.1, MDD/ CE, FCC-B, VCCI-B, FDA510(k) Approx. 8 kg CE, UL60601-1, CSA C22.2 No. 601.1, MDD/ CE, FCC-B, VCCI-B, RoHS,CCC, FDA510(k) 180 W W: 695.6 H: 512.1-573.6 D: 243.5 Tilt, turn 100 mm VESA Standard 100 x 200 mm VESA Approx. 15.5 kg Approx. 10 kg ANSI/AAMI ES60601-1(2005) +A1(2012), CAN/CSA-C22.2 No. 60601-1(2008), CE, FCC-B, ICES-003-B, VCCI-B, FDA510(k) Pending, J-Moss, RoHS Warranty (bring-in) Five years Five years Five years Five years Five years Five years Five years Options Remote calibration Uniformity Correction With TOTOKU PM Medivisor software (optional) Factory Uniformity Correction prior to delivery New correction possible with CAL008 calibration kit (optional)

GREYSCALE MONITORS TECHNICAL DATA MS23i2 MS25i2 MS33i2 MS35i2 MS53i2 MS55i2 ME 193 Application Good image reproduction thanks to ISD. Inexpensive diagnostic monitor. Resolution of more than 9 megapixels thanks to ISD. Very well suited for mammography diagnosis. Ultra-high resolution mammography monitor with a resolution of more than 15 MP thanks to ISD. Medical monitor for universal use with analogue and digital inputs. Display Technology TFT Greyscale IPS Technology TFT Greyscale IPS Technology TFT Greyscale IPS Technology TFT Greyscale IPS Technology IPS (Independent Sub Pixel) Yes Yes Yes No LED backlight Display size MS23i2: No MS25i2: Yes 21.3" (54 cm) MS33i2: No MS35i2: Yes MS33i2: 20.9" (52.9 cm) MS35i2: 21.3" (54.1 cm) MS53i2: No MS55i2: Yes 21.3" (54.1 cm) 19" (48.19 cm) Resolution (native) 1200 x 1600 (2 MP) 1536 x 2048 (3.1 MP) 2048 x 2560 (5.2 MP) 1280 x 1024 (1.3 MP) Resolution via ISD (Subpixel) Pixel pitch Maximum displayable greyscales (LUT) Simultaneously displayable greyscales (DVI) Maximum brightness 1200 x 4800 (5.8 MP) 1536 x 6144 (9.4 MP) 2048 x 7680 (15.7 MP) 0.270 mm x 0.270 mm 13.6 bits 12241 greyscales 11 bits / 2048 greyscales without ISD 10.3 bits / 1276 greyscales with ISD MS23i2: 1800 cd/m² MS25i2: 1900 cd/m² MS33i2: 0.207 mm x 0.207 mm MS35i2: 0.2115 mm x 0.2115 mm 13.6 bits 12241 greyscales 11 bits / 2048 greyscales without ISD 10.3 bits / 1276 greyscales with ISD MS35i2: 1000 cd/m² MS35i2: 1700 cd/m² 0.165 mm x 0.165 mm 0.294 mm x 0.294 mm 13.6 bits 12241 greyscales 11 bits / 2048 greyscales without ISD 10.3 bits / 1276 greyscales with ISD MS53i2: 1100 cd/m² MS55i2: 1200 cd/m² No 12 bits 4096 greyscales 11 bits / 2048 greyscales without ISD 10.3 bits / 1276 greyscales with ISD 1500 cd/m² Factory calibration 410 cd/m² 410 and 500 cd/m² 410 and 500 cd/m² 410 cd/m² Contrast ratio MS23i2: 700:1 MS25i2: 1400:1 MS33i2: 900:1 MS25i2: 1400:1 Viewing angle h: 170 / v: 170 h: 170 / v: 170 MS53i2: 850:1 MS55i2: 1200:1 MS53i2: h: 170 / v: 170 MS55i2: h: 176 / v: 176 1000:1 h: 170 / v: 170 Stabilisation l-sentinel II (integrated l-sentinel II (integrated l-sentinel II (integrated l-sentinel I (integrated Backlight lifetime Guaranteed brightness after lifetime has expired 300 cd/m 2 300 cd/m 2 410 cd/m 2 Protective filter Yes Yes Yes No Portrait function Yes Yes Yes Yes Connections Signal inputs Analogue: BNC (Sync on Video, Separate), NTSC/PAL Composite, Analogue VGA Digital: DVI-D USB hub General device specifications Power consumption MS23i2: 80 W MS25i2: 60 W MS33i2: 90 W MS25i2: 60 W MS53i2: 90 W MS55i2: 80 W Power save mode Yes Yes Yes Yes Power supply 65 W Dimensions in landscape mode W: 474 H: 468.4-529.9 D: 220 W: 474 H: 468.4-529.9 D: 220 W: 474.5 H: 479.9-541.4 D: 220 W: 416.3 H: 458.7-520.2 D: 220 Dimensions in portrait mode W: 367 H: 521.9-583.4 D: 220 W: 367 H: 521.9-583.4 D: 220 W: 390 H: 522.2-583.7 D: 220 W: 344 H: 496.1-557.6 D: 220 Mounting 100 mm VESA Standard 100 mm VESA Standard 100 mm VESA Standard 100 mm VESA Standard Anti-theft device Yes Yes Yes Yes Weight with base Weight without base Approvals 7.8 kg UL60601-1, CSA C22.2 No. 601.1, MDD/ CE, FCC-B, VCCI-B, RoHS, FDA510(k), CCC pending 7.8 kg Approx. 7.8 kg 9.2 kg Approx. 6 kg CE, UL1950, CSA950 EN60950, DHHS, FCC-A, IEC950 UL2601, CSA601 IEC601-1, TCO-95, IEC601-1-2, TÜV-GM UL60601-1, CSA C22.2 No. 601.1, MDD/CE, FCC-B, VCCI-B, RoHS, CCC, FDA510(k) UL60601-1, CSA C22.2 No. 601.1, MDD/ CE, FCC-B, VCCI-B, RoHS,FDA510(k), CCC Warranty (bring-in) Five years Five years Five years Three years UL60601-1, CSA C22.2 No.601.1, MDD/ CE(EN60601-1,EN60601-1-2), CCC, FCC-B, VCCI-B, J-Moss, RoHs Options Remote calibration Uniformity Correction With TOTOKU PM Medivisor software (optional) Factory Uniformity Correction prior to delivery New correction possible with CAL008 calibration kit (optional) Warranty conditions The warranty period starts from the date of delivery of the device. The following items are not covered by the warranty: If the monitor is operated above the factory-set calibration, the lifetime of the backlight cannot be guaranteed. Increase in pixel defects of the LCD display Ghost images or image sticking on the LCD display Reduction in the colour uniformity of the LCD display Reduction in the brightness uniformity of the LCD display

ALWAYS ON OUR MIND CUSTOMER AND MARKETS» Europe has always been the core market of Rein Medical. The family business, with headquarters in the west of Germany, combines all the product strategy organisational units under one roof. Our sales and service teams in Germany, Spain and Switzerland allow us to focus on our customers and ensure customer satisfaction. Long term cooperation with our customers is our top priority. MADE IN GERMANY Germany Switzerland Spain Rein Medical GmbH Rein Medical AG Rein Medical System, SA Visit us on the web: This QR-Code guides you directly to our homepage. Monforts Quartier 23 Büfelderstrasse 1 C/ Téllez 30 Schwalmstraße 301 CH-8370 Sirnach 1ª Planta, Oficina 2 Puerta 3 41238 Mönchengladbach 28007 Madrid Phone +49 (0) 2161 / 69 84 0 Phone +41 (0) 71 / 929 55 99 Phone +34 91 / 530 88 24 Fax +49 (0) 2161 / 69 84 259 Fax +41 (0) 71 / 929 55 90 Fax +34 91 / 574 32 93 www.reinmedical.com www.reinmedical.com www.reinmedical.com info@reinmedical.com info.ch@reinmedical.com info.es@reinmedical.com Corporate names and trademarks stated herein are the property of their respective companies. Specifications are subject to change without notice. 1996-2014 Rein Medical GmbH. File: BR_EN_TOTOKU V1.0.0, 28.08.2014