Omega D 420/520 Digital Multi-Functionality, Compact in Design
Introduction Omega D 420/520 Digital features Omega D 420 & D 520 are two highly advanced digital copiers with optional printer functionality which copy and print at a speed of 42 ppm and 52 ppm, respectively. High-quality output is guaranteed with their 600 x 600 dpi printing and scanning resolution and 256- level greyscale. Both models include a standard 70-sheet SRDF-1 as well as a standard stackless duplex unit. For superb finishing, users can add the optional F-4130K Stapler-finisher. With this finisher installed, copying and printing can continue while the finisher is stapling and/or punching, and sets are stapled while pages of the next set are being punched. By installing the F-4220 Booklet Stitcher, complete center stitched and folded booklets can be produced. For those who wish to use the Omega D 420 or the Omega D 520 as a printer, Olympia offers the Printing System (J) which turns these models into high-quality, 42-ppm and 52-ppm A3 laser printers. compatible with Windows 95, 98, 2000, NT 4.0 and Macintosh environments. In order to use the Omega D 420 and D 520 as networkable printers, the optional NC- 110 is available. Omega D 520: ideal digital solutions for workgroups and departments that want to stay ahead! High output speed The Omega D 420 copies and prints at an impressive speed of 42 copies/pages per minute, and the Omega D 520 is even quicker with a speed of 52 copies/pages per minute. High image quality Omega D 520 offer a proper copying mode for every type of original: a Text mode (sharp, high-quality text/print) a Photo mode and a Mixed mode for originals that contain both text and photos. Omega D 520 copy and print at a resolution of 600 x 600 dpi, in combination with 256 shades of grey. Standard SRDF-1 document feeder The standard design of the Omega D 420 and Omega D 520 includes the SRDF-1, a sheet-through reversing document feeder. With this type of feeder, originals are fed past the scanning section, rather than the scanning section moving underneath the originals. This reduces the noise level. Large paper supply In its standard configuration, the Omega D 420 includes 2 paper drawers with a capacity of 550 sheets each, and a 100-sheet stack bypass. This 1,200 standard paper supply can be expanded by adding either the optional 2 x 550- sheet MD-10K drawer unit, or the optional 3,000-sheet ST- 8K paper deck. Since the ST- 8K is standard on the Omega D 520, its standard paper supply is 4,200 sheets. User-friendly touch-screen display Omega D 520 s operation panel incorporates a large, userfriendly touch-screen display. The messages on the screen provide a clear and easy guidance through the various modes and functions. Even inexpert users can easily take full advantage of the Omega D 420 and Omega D 520 s advanced functionality. Standard stackless duplex unit 520 are equipped with a standard stackless duplex unit. A stackless duplex unit, however, turns around each single sheet, and then re-feeds it immediately to be copied on the back. The maximum number of duplex copies is no longer limited. Omega D 520 with F-4220 Booklet Stitcher
Large memory capacity In its standard configuration, the Omega D 420 incorporates one standard memory board with a 32 MB SIMM. This standard copier memory capacity can be expanded by mounting a 16 or 32 SIMM in the extra slot on the memory board. In addition, it is possible to add the optional MB-3 memory board. This contains a 32 MB SIMM; an extra slot is available for another 16 or 32 MB SIMM. The optional memory board is required for Job reservation and Dual access. The Omega D 520 is standard equipped with 2 memory boards with a total memory capacity of 64 MB (340 pages). Their memory can be expanded to a maximum of 128 MB, which equals about 680 pages (text originals, 6% coverage). Dual access Dual access means that the 520 can do two things at the same time. This applies to copier functionality and printer functionality alike. For instance, the Omega D 420 and Omega D 520 can scan originals while they are making copies from memory. Form overlay Another typically digital function on the Omega D 420 and Omega D 520 is form overlay. This function combines two originals onto one sheet, overlaying one on top of the other. The first original (logo, header, footer, company letterhead) that is scanned into memory is the form ; this image will be combined with the images of any other originals that follow. The toner density for the form can be set from 10 to 100% (in steps of 10%). Booklet copying Omega D 520 can automatically create a booklet from single or double-sided originals. After all originals have been scanned into memory, the Omega D 420 and Omega D 520 automatically reduce them and place them in the correct order for a booklet. Book to book copying This function creates booklet copies from book originals. In addition, it is possible to add a copy of the original front cover. Job building Developed to maximise productivity, efficiency and convenience, this function enables users to easily combine many different types and sizes of originals (e.g., single-sided and/or double-sided A4, A3 or A5, books, magazines, etc.) as well as a large number of originals exceeding the document feeder capacity, into one single copy job. All originals are first scanned into memory. To verify the settings, the user can make a test copy of each last scanned set of originals. Printing System (J) The optional Printing System (J) turns the Omega D 420 and Omega D 520 into 42-ppm and 52-ppm, 600-dpi printers while fully maintaining their copier functionality. Thanks to their 256-level greyscale, high-quality output of photographs or any other documents containing halftones is guaranteed. Prescribe IIe With the PRESCRIBE IIe Page Description Language you will be able to control your output beyond the functionality the driver is offering you. This means you can use the printer features to their full extent without being limited by driver or application functionality. Printer memory When used as a printer, the 520 have a standard print memory of 16 MB that can be extended to 64 MB. Job reservation The Job reservation function also applies to the Omega D 420 (with memory board) and Omega D 520 s printer functionality. This means that the user can check the status and, if necessary, change the settings of a print job using the Omega D 420 and Omega D 520 s LCD display. It is also possible to cancel print jobs which are still in the queue, or change their priority. A3 printing Omega D 520 support printing on A3-size paper. This feature combines well with Booklet printing and N-up printing.
Omega D 520 with F-4130 Finisher Options Standard stackless duplex printing Omega D 520 allow duplex printing in sizes A3 and A4. Because of their stackless duplex unit, there is no limit. Booklet printing With this feature, users can easily create booklets from their PCs. All the pages of a document are first spooled into memory, then printed 2- in-1, in the correct order for a booklet. With the optional F- 4220 Booklet Stitcher, folding and stapling will be handled by the Omega D 420 and Omega D 520. NC-110 network board The NC-110 in combination with Printing System (J) will turn the Omega D 420 and Omega D 520 into fast and feature-rich network printers, which give you desktop access to all the image, document handling and finishing functions. MD-10K Paper drawer unit The Omega D 420 s standard paper capacity of 1,200 sheets can be expanded with the optional MD-10K for an extra 1,100 sheets. The MD- 10K features 2 paper drawers with a capacity of 550 sheets each. ST-8K Paper deck (standard on the Omega D 520) For optimum productivity, users can add the ST-8K 3,000 sheet paper deck to their Omega D 420. This enlarges the Omega D 420 s paper capacity to an impressive 4,200 sheets. The ST-8K can hold A4 size paper in weights from 60 to 80 g/m 2 F-4130K Stapler-finisher The F-4130K has a stacking capacity of no less than 3,000 sheets and can sort, punch and staple sets of up to 50 sheets. Thanks to its offset sorting method, non-stapled sets exceeding 50 sheets can also be sorted. On the F-4130K, 2 or 4 holepunching is done per sheet rather than per set, which means that there is no limit to the hole-punch capacity (as long as stapling is not selected). Hole-punching begins as soon as the first page of the set has been copied, and copying or printing can continue without interruption. F-4220 Booklet Stitcher 520 can also be equipped with the F-4220 Booklet Stitcher. The F-4220 with 2 main trays has a stacking capacity of a 1,000 sheet on each tray and can staple sets of up to 15 sheets or a total of 60 pages. Thanks to its offset sorting method, non-stapled sets can also be sorted. On the F-4220, stapling can be done in three different positions: top, rear or center. It also operates cover mode on booklet. With its 2 output trays, the F-4220 will sort copy jobs from print jobs.
Technical Specifications Omega D 420/520 Type Copier, optional (network) printer Special functions Auto. original detection, auto. cassette, D 420: desk-top type, D 520: console type auto scale, split page function, Copying Process Indirect, electrostatic copying process border erase function, margin offset, with dry dual-component toner toner density control, auto. clear, Printing system Electro-photography by semiconductor auto. start, auto drawer switching, laser non-stop paper replenishment, Copying D 420: 42 cpm (A4), 22 cpm (A3) auto./manual exposure performance D 520: 52 cpm (A4), 26 cpm (A3) N-up copying, form overlay, Recommended D 420: max. 90.000 copies rotate sorting, image rotation, monthly volume D 520: max. 120.000 copies OHP backing sheet mode, Warm-up time less than 30 seconds presentation mode, sheet insertion mode, First copy 4,5 sec booklet copying, page numbering, Scanning system Flat bed scanning by CCD image sensor positive/negative reversal, mirror image, Scanner resolution 600 x 600 dpi program copying (up to 7 programs), Greyscale 256 levels Eco-mode, test copy, weekly timer, Originals Single sheets, books and 3D objects auto. pre-heat, auto shut-off, Max original size A3 Department 1.000 departments, can be limited Paper types Plain paper, recycled paper; from stack function bypass: OHP-sheets; envelopes,(when Photo-conductor OPC-drum machine is used as a printer) Safety test CE certificates Printing resolution 600 x 600 dpi Power supply Mains: 220 240 V, 50 Hz, Paper capacity D 420: Standard: 2 x 550 sheets (80g/m 2 ) Dimensions D 420: 627 x 748 x 841 mm (W x D x H) + 100 sheets (bypass)(80g/m 2 ), optional D 520: 627 x 748 x 1.131 mm (W x D x H) 2 x 550 sheets or 1x3.000 sheets (80g/m 2 ) Weight D 420: 129 kg, D 520:160 kg D 520: Standard: 2 x 550 sheets (80g/m 2 ) + 1x 3.000 sheets (80g/m 2 ) + 100 sheets (bypass)(80g/m 2 ) Environmental data Max output size A3 A6R Power consumption Copying: D 420: 873 W/h, D 520: 968,2 W/h Paper sizes A5R to A3, folio (cassette), 60 80 g/m 2 Stand-by: D 420: 178 W/h, D 520: 239 W/h A6R to A3, folio envelopes (bypass), Noise level Stand-by: D 420: 48 db, D 520: 47 db 60 160 g/m 2 Copying: D 420: 70 db, D 520: 70 db Output Face-down or face-up Ozone emission D 420: 0,015 mg/m 3, D 520: 0,03 mg/m 3 Output capacity 250 sheets (80g/m 2 ) Fine dust D 420: 0,025 mg/m 3, D 520: 0,04 mg/m 3 Multiple copying 1 999 Styrene D 420: 0,02 mg/m 3, D 520: 0,017 mg/m 3 Reduction 4 fixed levels (25%, 50%, 70%, 75%) Enlargement 4 fixed levels (106%, 141%, 200%, 400%) Zoom 25% 400% (in steps of 1%) independent X/Y zoom Operator guidance Touch-screen display, several languages available Memory Standard: 12 MB bitmap memory and 32 MB (D 520: 64 MB) image memory Max image capacity:128 MB Exposure control Manual / automatic exposure control (noble gas lamp), Text mode, Photo mode, Text/Photo mode SRDF-1 Document feeder (standard) Type Automatic document feeder for single/double sided originals Paper size A3 A5R; computer forms (11 x 15") Capacity 50 x A3-B4 / 70 x A4 A5R (80 g/m 2 ); 33 x A4 (120 g/m 2 ) Up to 50 sheets in mixed originals (auto selection) mode Paper weight Dimensions Weight ADF-Mode: 35 160 g/m 2 (A4) RADF-Mode: 50 120 g/m 2 (A4) (W x D x H): 553 x 478 x 121 mm 10,5 kg Duplex unit (standard) Copy direction Normal, rotated Capacity Unlimited (stackless) Paper size A5R A3, Folio Paper weight 75 80 g/m 2
Accessories for Omega D 420/520 F-4130 (K) Stapler-finisher ST-8 (K) paper drawer unit (for Omega D 420) Number of bins 2 (sub tray, main tray) Paper capacity 3.000 sheets (80 g/m 2 ) Output direction Sub tray: face down w/o hole-punch; Paper size A4 or B5 face-up with hole punch; Paper weight 60 80 g/m 2 Main tray: face-down Power source Supplied from the Omega D 420 Output capacity Sub tray (non-sort): 250 sheets A4 Dimensions (W x D x H): 595 x 612 x 320 mm (80 g/m 2 ); 150 sheets A3 (80 g/m 2 ) Weight Approx. 35 kg Main tray (sort or group): 3.000 sheets A4 (80 g/m 2 ); 1.500 sheets A3 (80 g/m 2 ) Available modes Sub tray: Non-sort: punch / non-punch MD-10 (K) paper drawer unit (for Omega D 420) Main tray: Sort: punch / non-punch; Paper capacity 2x 550 sheets (80 g/m 2 ) staple / non-staple; Paper size A3 A5R Group: punch / non-punch Paper weight 60 80 g/m 2 Paper size Sub tray: non-punch: A3 A6R, Folio Power source Supplied from the Omega D 420 Punch: A3 A5R, Folio, Main tray: A3 B5 Dimensions (W x D x H): 595 x 612 x 320 mm Paper weight Sub tray: punch / non-punch: 60 160 g/m 2 Weight Approx. 29 kg Main tray: 60 160 g/m 2 Sorting & grouping Off-set method Printing system (J) Stapling capacity 50 sheets (A4); 30 sheets (A3) Type embedded Number of staples 1 or 2 Processor PowerPC 603e 166 MHz Staple positions Top left-hand corner or bottom left-hand Interface IEEE 1284 bi-directional parallel, ECP corner (1 staple, portrait, landscape) Operating sytems Mac OS 7.6, Mac OS 8.x, Centre of left-hand margin (2 staples, Windows 95 / 98 / NT 4.0/ 2000 portrait) Emulations PCL 5e, PCL 6 incl. PJL, Prescribe IIe, Number of punch 2 or 4 PostScript level II (KPDL2), Line printer, holes IBM Proprinter X24E, Epson LQ-850, Power source Supplied from the Omega D 420 / D 520 Diablo 630 Dimensions 617 x 584 x 960 mm (W x D x H) Fonts 80 outline fonts, 1 bitmap font (PCL) Weight 40 kg Print speed D 420: 42 cpm (A4), D 520: 52 cpm (A4) Paper sizes A3 A6R, Folio, envelopes, user defined (PCL 6 driver only) F-4220 (K) Booklet Stitcher Resolution 600 x 600 dpi or 300 dpi x 300 dpi Number of bins 2 main trays and 1 Booklet tray (lowest tray) (KPDL II), (PostScript Level II driver) Output capacity Main trays: 2x 1000 sheets (A4, 80g/m 2 ); Image memory Standard 16 MB, 2 add. slots, max. 64 MB 500 sheets (A3, 80 g/m 2 ); Booklet tray: 25 sets Available modes Main trays: Group: staple/non-staple; NC-110 network board Non-sort, Sort: staple/non-staple; Interface 10/100BaseTX Booklet tray: booklet stitch + folding Protocols TCP/IP, IPX/SPX, EtherTalk Paper size Main trays: Non-sort, sort, group: A3 A6R Network operating Windows NT3.51/4.0; Stapled: A3 B5; Booklet tray: A3 A4R systems Novell NetWare 3.x/4.x Paper weight Main trays and booklet tray: 60 160 g/m 2 Sorting & grouping Off-set method MB-3 Memory board Stapling capacity Main trays: 50 sheets per set (A4); Bitmap memory 12 MB 30 sheets (A3); Image memory D 420: 32 MB, D 520: 64 MB Booklet tray: 15 sheets (A3 A4R) Expandable with 16 MB or 32 MB Number of staples 1 or 2 Numbers of slots 2 Staple positions Main trays: Top left-hand corner or bottom left-hand corner (1 staple, portrait, landscape); Centre of left-hand SIMM margin (2 staples, portrait) Capacity 16 MB and 32 MB Booklet tray: centre ( 2 stitches) Type EDO RAM Power source Supplied from the Omega D 420 / D 520 Data width 32 bit Dimensions 669 x 582 x 1.053 mm (W x D x H) Parity None Weight 52 kg Access time 60 nsec SIMM socket 72 pin 05.142.4810.000 The information contained in this document is subject to change without notice. Authorised Dealer Olympia Europe GmbH Olympiastraße 1 D - 26419 Schortens