Ceramic Hybrid Technologies Metal Injection Molding Molded Interconnect Devices Information about hybridica 2010 2nd International Trade Fair for the Development and Manufacture of Hybrid Components 9 12 November 2010 l New Munich Trade Fair Centre www.hybridica.de
hybridica: a platform with a future The world of hybrid components is far more than metal lattices connected by plastic, rubber or silicon. It also includes components based on metal and ceramic injection molding and plastics that can conduct electricity. These innovative future technologies such as metal injection molding (MIM), ceramic injection molding (CIM) and molded interconnect devices (MIDs) fit perfectly into the exhibition profile and objectives of hybridica. For the fi rst time ever, hybridica will have separate exhibition sectors for these future technologies in 2010. Same innovative potential: green light for intelligent solutions More and more often, MIM and CIM components are being combined with other materials. For example, high-performance ceramics are increasingly used only on surfaces that are subject to wear, and the rest of the part is then made only of metal or plastic. Same wavelength: injection molding a key production technique Why is hybridica the right trade show for these technologies and, thus for your company? Directly into the future Today, the term hybrid refers to a combination of various materials. However, the scientific and industrial sectors are also working on ways to alter specific properties within materials. One of the most important innovations is the development of plastics with conductive properties. This innovation is groundbreaking, especially for the electronics industry: It not only makes it possible to directly overmold electronic components. According to experts, it also opens up a new dimension for printed circuit boards in the form of molded interconnect devices (MIDs). hybridica brings this technology together with its industrial users. Same objective: the best of everything Whether metal, plastic or ceramic, and whether stamped or injection molded: hybridica revolves exclusively around material combinations and manufacturing techniques! After all, these innovative solutions are the only ones that can meet the hightech industry s high requirements with regard to design, functionality, precision and complexity. Injection molding has established itself as a key processing technique in the hybrid sector. It is used to overmold metal, ceramic and rubber parts in plastic. However, plastics injection-molding machines are also used to mold metal and ceramic feedstocks. In short, hybridica gives you the right surroundings and the right partners for putting your solutions i.e. precision injection-molding machines, hot-runner systems, tool and die making, production automation, and much more in the best light. Same sales markets: hybridica s target industries The branches of industry that purchase these components are diverse: automotive, IT/computers/telecommunications, plant and machine manufacturing, textiles, medical technology, electronics and electrical engineering, consumer goods, sporting goods and household appliances. The sectors for aviation/ aerospace, power engineering, microsystem technology, mechatronics and actuators also have market potential. These are exactly the industries that are looking for hybrid solutions, which makes them regular customers at hybridica. Engineers, designers and product developers in all of these industries come to Munich to search for specific hybrid components at hybridica. Additional information about the visitors at hybridica 2008 and their industries of origin is available at www.hybridica.de/ factsheet.
electronica: collaborating with a strong partner One of the most important core markets is the electronics industry. Holding hybridica at the same time as electronica, the world s leading trade fair for electronic systems, components and applications, gives you access to this gigantic sales market. Take advantage of this enormous presence of international industry representatives to generate new business contacts. electronica 2008 was attended by some 73,000 visitors from 113 countries (44% share of foreign visitors) and all branches of industry: Industrial electronics Automotive Electronics for consumer goods Medical electronics Telecommunications Consumer electronics Power engineering Military electronics Aviation/aerospace Development/manufacture Hybrid components Electronics Components Electronics applications/ systems
Why being there is worthwhile In the best company hybridica focuses on innovative composite materials and integrated production technologies. The fair s concept is generating interest in high-tech consumer industries. As a result, hybridica gives existing markets added depth and opens up new sales opportunities. All processes, all branches of industry hybridica is interdisciplinary with regard to materials, processes and branches of industry. That distinguishes hybridica from trade shows that focus on a single material and its processing on the one hand and to events that concentrate on a single branch of industry on the other. Platform for key competencies Present all business sectors: most companies that have specialized in MIM and CIM technology or that use plastics that conduct electricity are also specialists in plastics injection molding and manufacturing material hybrids. Position your company in new markets and profit from being in such close proximity to hybrid metal and plastics specialists. Good connections Hybrid components are also conquering new applications outside of the electronics sector such as medicine, power engineering and sporting goods. Messe München holds trade shows in many of those sectors, and we use our contacts for visitor advertising for hybridica. Entire value-added chain New materials new processes: using innovative technologies calls for teamwork between the end user, developers and production specialists. hybridica s exhibition profile takes this market requirement into account by depicting the process chain in its entirety. Visitors with budgets to invest (excerpt) 3M Deutschland ABB ACO Severin Ahlmann Alfred Kärcher Alpine Electronics R&D Europe Amphenol Tuchel Electronics AREVA Energietechnik Bizerba Automotive BMW Böllhoff Verbindungstechnik Bosch Braun Brose Fahrzeugteile BSH Bosch und Siemens Hausgeräte Cherry Continental Daimler Danfoss A/S Dornier DuPont de Nemours Deutschland EADS Military Air Systems Eichenauer Heizelemente EPCOS Escha Bauelemente Eurocopter Deutschland Evonik Degussa Farr electronic & optic Faurecia Autositze FCI Connectors Deutschland Festo fischer automotive systems Fr. Sauter Freudenberg Mektec Europa GARDENA Manufacturing Giesecke & Devrient Harman Becker Automotive Systems HARTING Electronics HAWE Hydraulik Hella Hilti Hirschmann Automotive Hoffmeister Leuchten Infineon Technologies Jäger Automobil- Technik Kontron Embedded Computers KraussMaffei Technologies KS Gleitlager KUKA Roboter Landis+Gyr MAN Nutzfahrzeuge maxon motor Mercedes Benz Technology MHH Solartechnik Miele & Cie. Mitsubishi Electric Europe NEC Electronics Europe Nokia Océ Printing Systems Oechsler Osram Otto Bock Healthcare PARI Pharma Philips Procter & Gamble RAFI REHAG Elektronik Rehau Robert Bosch Schaeffler SCHOTT Siemens Simons-Voss Technologies ThyssenKrupp Nirosta Toshiba TRUMPF Werkzeugmaschinen Tyco Electronics Varta Microbattery Vishay Semiconductor VOGT electronic Volkswagen W.C.Heraeus WABCO WAGO Kontakttechnik WANDERER Mechatronische Systeme Webasto Wincor Nixdorf International WISI Automotive Yamaichi Electronics Deutschland ZF Electronics Source: Visitor registration for hybridica
Ceramic/metal injection molding: Range of exhibits (excerpt) Injection-molded parts made of metal powder (MIM) or ceramics (CIM) Ceramic-metal, ceramic-plastic hybrid components Feedstocks (metal, ceramic) Tool and die making Injection molding Other processes for ceramic hybrids Surface treatment Joining and connecting technologies Molded interconnect devices: Range of exhibits (excerpt) Materials/plastics Metallization and structuring Surface treatment Tool making Injection molding Design & engineering Assembly and joining techniques A detailed list of product-group categories is available online at www.hybridica.de Factors of your success You define and sustainably strengthen your market position in the sales market for hybrid components. You underscore your expertise thanks to an intense exchange of know-how with a highly qualified audience of industry professionals. You generate new contacts and concrete business at the fair because all important decision-makers are present. You meet your target groups and market partners in the industry without coverage waste. Success You fi nd out about your customers needs fi rst hand and can precisely optimize your products/services. You can immediately identify and analyze your competitors and adjust your strategies accordingly. Thanks to the interdisciplinary exhibition concept, you tap lucrative new sales markets. You profit from the fact that hybridica is held at the same time as the world s leading trade fair electronica and the large number of international visitors.
The future at your fingertips North Entrance Transparent Manufacturing The Glass Production Line gives trade visitors attending hybridica a convincing live demonstration of how quickly and accurately integrated production lines work directly from the source. Multi-storey car park West hybridica Entrance C1 The hybridica Forum The hybridica Forum complements practice with theory. Experts from the scientific and industrial sectors present the state of the art in hybrid technology and manufacturing solutions. As a result, hybridica actively supports networking and the exchange of information between industry and research and between the scientific and commercial sectors. ICM West Entrance hybridica electronica Highlight Avenue The address of choice for hybrid studies in specific application sectors: this is where hybridica joins you in peaking over the fence and showcasing innovative hybrid components, broken down according to new markets such as lightweight hybrid design and hybrid concepts for the consumer goods and sporting goods industries. We look forward to welcoming you as an exhibitor in 2010! Dates: Tuesday, November 9, 2010 to Friday, November 12, 2010 Hours: Tuesday Thursday 9 am 6 pm, Friday 9 am 5 pm Source of all photos: Messe München GmbH, BASF SE, Fraunhofer IKTS Hotline: (+49 89) 9 49-1 13 38 Fax hotline: (+49 89) 9 49-1 13 39 Venue: New Munich Trade Fair Centre Organizer: hybridica l Messe München GmbH l Messegelände l 81823 München, Germany Exhibition Team: Tel. (+49 89) 9 49-2 03 70 l Sales: Tel. (+49 89) 9 49-2 05 63 Fax (+49 89) 9 49-2 03 79 l E-mail: info@hybridica.de l Website: www.hybridica.de