Viperflex Injectable Waterproofing Systems Waterproofing Restoration

Viperflex Injectable Waterproofing Systems Waterproofing Restoration

Protecting the built world Providing proven and effective high performance waterproofing and coating solutions.

Experience Viperflex was used to repair leaking elevator pits in the newly constructed Building 7 of the World Trade Center.

Acrylate Chemical Grout Viperflex Restorative gel waterproofing: Viperflex is a modified acrylate injectable resin that polymerizes into a thick, sticky gel. Viperflex is combined with an accelerant (ViperTea) and a catalyst (ViperCat) to initiate polymerization. Water is not necessary to activate polymerization.

Unique Characteristics of Viperflex Viscosity like water allows resin to penetrate deep into concrete cracks and voids and permeate soils/clays to create an impervious gel membrane. Field controlled adjustable polymerization time from a few seconds to 2 hours. Non-toxic, safe for the environment and the applicator. Non-expansive. Will not pose a danger to buried utilities or adjacent structures. Contains a short-lived color dye enabling the operator to visually control application, after polymerization, dye disappears leaving no stains.

Durability combined with effective water control Polymerizes in contaminated water, brackish, salt and sewage water to form a sticky gel. Viperflex is inert and inorganic. It will not react with insitu materials and it will not grow fungi, mold or bacteria. Includes a corrosion inhibitor that halts oxidation of reinforcing steel in concrete. Elongation: 250% 350%* Tensile Strength: 100 psi 350 psi* *Varies on solids content

Dynamically Responsive to Substrate Movement Active responsiveness to substrate movement and vibration -Viperflex retains its remarkable elasticity, adhesion and flexibility and can easily withstand distortion, movement and temperature fluctuation. -Viperflex remains waterproof during repeated wet/dry cycling. = Permanent Waterproofing

Chemical resistance chart TEST METHOD: A polymerized Viperflex sample was kept at room temperature for a period of 42 days. The degree of discoloring, consistency, and dissolution was observed. The test sample was characterized as either "stable" or "unstable". Gasoline (unleaded) - Motor fuel - Diesel - Diesel and heavy heating oil - Toluene - Aromatic Solvent - Xylene - Aromatic Solvent - Methanol (50% in water) - Alcohols - Isoproponal (50% in water) - Alcohols - N-Methyl Pyrrolidone - Nitrogen w/solvent - Ethyl Acetate - Aliphatic esters - Methyl isobutyl ketone - Aliphatic ketones - Formaldehyde (35% in water) - Aldehydes - Acetic Acid (10% in water) - Organic Acids up to 10% - Sulfuric acid (2% in water) - Mineral acids - Sulfuric acid (20% in water) - Mineral acids up to 20% - Sodium Hydroxide (ph 11-12) - Same as ph in concrete - Common Salt (20% in water) - Salt solutions up to 20% -

Viperflex Equipment Dual Hopper Injection Pump Pump Features: Two 5 gallon cone-bottom reservoirs Two cleaning reservoirs Pump pressure can be adjusted from 100 to 800 psi Injection Pump

Viperflex Equipment IP 100 Injection Pistol IP-100 Injection Pistol IP-100 Features Self-Locking Design Pneumatic Quick Release Valve Interchangeable Tips Single or Dual Injection Seamless Integration The IP-100 Injection Pistol completely eliminates the need to use injection packers and dramatically increases productivity.

Viperflex Equipment IP 100 Injection Pistol

Viperflex Application Restorative Waterproofing Soil Layers Protective Layers Existing Waterproofing Layers Substrate Injected Waterproofing IP100 Injection Pistol Injection Pump Displaced Water

Restorative Waterproofing Concept Restorative waterproofing material should have Responsiveness to substrate movement, especially at crack or joint areas Loss resistance to water pressure/flow Durability to establish a long lasting seal Existing damaged waterproofing layer Restorative waterproofing layer Injection counter flow Stop water leakage by injecting directly to the existing waterproofing layer

Drill 1 diameter hole to a 4 depth.

Drill 5/8 hole through wall

Drill 5/8 counterflow hole 6 12 on center (spacing may vary)

Use IP-100 injection pistol to inject center hole

Viperflex migrates behind the substrate to restore waterproofing

Viperflex counterflows adjacent holes.

Patch and plug holes with nonshrink rapid set grout.

Confirm patch and repeat process

Case Profile: World Trade Center Project : World Trade Center, Building 7, New York City, NY Freight Elevator Pit Leak Repair using Viperflex Injection Upon arrival, 2 inches of water Upon leaving, completely dry

Case Profile: Guadalupe Power Partners Project : Guadalupe Power Partners, Marion, TX 256 linear ft. of crack injected with Viperflex Injected with IP100 Injection Pistol Plant able to resume operations as scheduled

Case Profile: Northbridge Centre Garage and Planter Repair Project : Northbridge Centre, Palm Beach, FL Backer rod replacement with Viperflex applied to repair expansion joint Viperflex also injected along pipes going through slab, into seams and behind main steps of the building.

info@kingfieldcp.com 612-225-5167 Kingfield Construction Products 4251 1 st Ave. S. Minneapolis, MN 55409 www.kingfieldcp.com