Low Power RF Development Kits & Tools Introduction & Overview Q3 2013
The LPRF Tools Concept Evaluation Module (EM) Complete hardware assembly with the reference design for the radio device, ensuring maximum performance. Evaluation Board (EB) Contains sockets for the EM. Platform for testing the performance of the radio and for development of protoype software PC Tools Connect the EB to the PC and use available tools to test, configure and debug software running on the chip.
The LPRF Tools Concept (Mini Kits) Application Board Complete application specific, small form factor prototype board with all you need for experimenting with the device. CC Debugger Debug, Test and Programming probe for the 8051-based SoCs and some selected transceivers PC Tools Connect the Debugger to the PC and use available tools to test, configure and debug software running on the chip.
Development Kit Overview
Development Kits The typical Low Power RF development kit contains 2 x RF Boards 2 x Mother Boards 2 x Antennas Relevant Accessories Documentation The boards are preprogrammed with a demo application usually a packet error rate (PER) test for practical range testing
What can you do with the kits? Evaluate the RF performance of the radio by controlling the radio from the PC with SmartRF Studio Get familiar with all relevant development tools Run the embedded packet error rate application for practical range testing Use the hardware as a known good platform during test and verification Develop and debug software Connect your own peripherals and controllers for prototyping
Why do I need the SmartRF EB? Flexible test and development platform Functional testing with SmartRF Studio Use Studio+EB+EM to send packets receive with your system Use your system to send packets receive with Studio+EB+EM Test SW with good HW Connect your MCU to the radio on the EB and test RX and TX Test HW with good SW Connect EB to your RF module and test RX and TX via Studio
Evaluation Module Kit The evaluation module kit contains two RF EMs and antennas. We have EMs for all of our radios The reference design (schematics, gerbers and bill of material) for all of the EMs are available on the web.
Evaluation Module Kit PA/LNA Front End Combo boards with CC1190, CC2590 or CC2591 and a radio: CC1101CC1190EMK868 CC1101CC1190EMK915 CC2520-CC2591EM CC2530-CC2591EM The combo boards are supported by SmartRF Studio and the evaluation boards
EM Module = Reference Design Copy the reference design and use it in your product. Simplifies the design effort and brings new products to market faster. All designs are available on the web (gerber files ++).
Evaluation Module Kit USB Dongles CC1111 USB Dongle 868-915MHz CC2511 USB Dongle 2.4 GHz CC2531 USB Dongle CC2540 USB Dongle 2.4 GHz Can operate as packet sniffers USB Firmware Library and Examples available on the web
Performance Line Development Kits Complete hardware and software development environment for the CC112x devices. SmartRF Transceiver EB (TrxEB) is the new general purpose test and prototype platform for transceivers - MSP430F5438A - Dot matrix LCD - Easy to use Available for $299 Contents of CC1120DK: 2 x CC1120EM 868-915 MHz 2 x SmartRF TrxEB 1 x MSP-FET430UIF Antennas, cables and documentation Available add-on kits: - CC1120EMK-169 - CC1120EMK-420-470 - CC1120EMK-868-915 - CC1120EMK-955 - CC1121EMK-868-915 - CC1175EMK-868-915
Value Line Development Kits Complete hardware and software development environment for the CC110L, CC113L and CC115L devices. Low cost reference design with PCB antennas Includes the SmartRF Transceiver EB Available for $299 Contents of CC11XLDK-868-915: 2 x CC1120EM @ 868-915 MHz 1 x CC113LEM and 1 x CC115LEM @ 868-915 MHz 2 x SmartRF TrxEB 1 x MSP-FET430UIF Cables and documentation Add-on kit: - CC11XLEMK-433
Value Line Development Kits: CC1200DK New Transceiver evaluation board for all transceivers. Peripherals available for development MSP430F5438 MCU USB interface 128 x 64 dot matrix LCD 3 axis digital accelerometer Ambient light sensor Comes with improved PER test and enhanced user experience Easy to use meny system and navigation interface Example SW for quick prototyping More than 10 km range out-of-the-box Supported software tools SmartRF Studio 7 PC tool for generation RF settings & testing (free download) Packet sniffer PC software (free download) IAR Embedded workbench or CCS for code development on MSP430 Kit contents: 2 x SmartRF Transceiver EB (TrxEB) 2 x CC1120EM 868/915 MHz 2 x Pulse Antennas 1 x MSP430 Debug Probe (FET) Cables & Documentation
RF BoosterPack with CC110L RF BoosterPack kit for the MSP430 LaunchPad kit. Consists of two BoosterPack boards with CC110L AIR module from Anaren Contents of 430BOOST-CC110L: 2 x BoosterPack Boards with CC110L module 2 x Preprogrammed MSP430G2554 devices Software and documentation Complete with software and a PC tool to demonstrate RF link properties Available for $19
6LoWPAN Development Kit Complete system development kit for 6LoWPAN The development kit demonstrates an example of typical sensor network with a simple Network Analyzer software running on the nodes. Contents of CC-6LOWPAN-DK-868: 2 x CC1180 Target Boards 2 x CC430EM 1 x OMAP L138 Exp Board + CC1180EM (Gateway) Software from Sensinode Includes IPv6 Gateway for PC connectivity
PurePath TM Wireless CC85xx Development Kit The CC85XXDK kit lets the user evaluate PurePath Wireless technology and the CC8520/21/30/31 for wireless audio applications. The development board includes TLV320AIC3101 audio codec S/PDIF optical & coax in/out Analog line in/out Headphone out and Microphone out Use the PurePath Wireless Configurator PC to configure the audio device Target applications for the CC8520 Wireless audio signal cable replacement Wireless headphones Wireless subwoofer
PurePath TM Wireless CC85xx Headset Development Kit Headset boards with - CC85XX - CC2590 - TLV320AIC3204 - Audio IN/OUT - PCB antenna Small form-factor design. Available for $149 Contents: 2 x CC85XX Headset boards 2 x Rechargeable Lithium batteries 1 x CC Debugger
ZigBee Development Kit Contains all hardware needed for prototyping and development of ZigBee applications. Preprogrammed nodes in the kit makes it easy to get started and to demonstrate ZigBee The TI ZigBee stack can be downloaded from the web at no cost. The stack supports CC253x and CC2520 CC2530ZDK 60 day Evaluation License of IAR Embedded Workbench
ZigBee Light Link Development Kit The ZigBee Light Link development kit will include the ZLight2 board: CC2531 PCB antenna 4 OSRAM LEDs (red, green, blue and white) Powered from USB (5VDC) Software demo application based on TI s Z-Stack Lighting software solution. CC2530ZDK-ZLL Contents: 3 x Zlight2 boards and micro USB cables 1 x CC2531 USB dongle acting as remote control Kit Price $99 Release: Q2 2013
ZigBee RF4CE Development Kit Development kit for quickly getting started with RF4CE Contains Advanced Remote Controller with air-mouse capabilities CC2533 target module with a multitude of connection options One regular and one tiny USB dongle for PC connectivity CC Debugger A complete RF4CE software stack is available from www.ti.com/tool/remoti CC2533DK-RF4CE-BA Available now for $149
CC2538 Development Kit Complete development kit for ARM Cortex-M3 based CC2538. Includes the new SmartRF06 Evaluation Board - XDS100v3 (c)jtag Emulator - Dot matrix LCD - SD card holder - Light sensor and acc.meter - Current sense circuitry - Break-out jumpers CC2538DK Contents: 2 x SmartRF06EB 2 x CC2538EM 1 x CC2530 USB dongle (sniffer) Platform for RF evaluation, testing and prototype development IEEE 802.15.4 Packet Sniffer Kit Price: $399 Release: Q2 2013
CC2540 Development Kit Complete hardware and software development kit for CC2540/41 and Bluetooth Low Energy Generic platform for RF evaluation, testing and prototype development The included CC2540 USB dongle can be used as a BLE Packet Sniffer Available for $299 CC2540DK Contents: 2 x SmartRF05EB 2 x CC2540EM 1 x CC2540 USB dongle Available add-on kits: CC2540EMK CC2541EMK CC2540EMK-USB (dongle)
CC2541 SensorTag Development Kit CC2541 SensorTag Operates as a Bluetooth Low Energy peripheral device. Fitted with six sensors, all sensors chosen to be small, energy efficient, and low cost surface mount devices; object temperature, humidity, pressure, gyroscope, accelerometer, magnetometer CC2541DK-SENSOR Contents: 1x CC2541 SensorTag with plastic enclosure 1x CR2032 Battery Allows app developers to quickly and easily write smart phone apps for Bluetooth Low Energy accessories without any embedded hardware or software development. Available now for $25
CC2541 Remote Control Kit CC2541 Bluetooth low energy Advanced Remote Control Kit The kit contains all the hardware, software, and tools required for evaluating, developing, testing, and debugging BLE controllers and target nodes (Set-Top-Box, TV, etc). CC2541DK-RC Contents: 1 x CC2541 Advanced Remote Control 1 x CC2540 USB Dongle 1 x CC Debugger Kit Price $149 Release: Q2 2013
CC2541 Mini Development Kit Contains a CC2540 USB dongle and a CC2541 Keyfob The keyfob operates as a BLE peripheral device. The keyfob is equipped with a battery regulator for very low power consumption, a two-colored LED, buzzer, a 3-axis accelerometer and two buttons. For only $99, it is ideal for prototyping and demos. CC2541DK-MINI Contents: CC2541 Keyfob CC2540 USB dongle CC Debugger Includes the CC Debugger for programming, debugging and SmartRF Studio support A variant with a CC2540 Keyfob is also available.
CC2543-CC2544 Development Kit Complete hardware and software development kit for the 8051-based, 2.4GHz proprietary RF CC2543, CC2544 and CC2545 system-on-chips. Generic prototype platform for RF evaluation, testing and software development Available now for $299 CC2543-CC2544DK Contents: 2 x SmartRF05EB 2 x CC2543EM 1 x CC2544 USB dongle Available add-on kits: CC2545EMK
CCxx10 Mini Development Kits The $75 CCxx10 Mini Development Kits provide a basic development and test platform at low cost Contains hardware making it possible to set up a link between two simple RF nodes. CC2510DK-MINI CC1110DK-MINI-868 Includes the CC Debugger for programming, debugging and SmartRF Studio support
EM Adapter BoosterPack EM Adapter BoosterPack for TI LaunchPads Easily add wireless connectivity to your LaunchPad Compatible with - LPRF Transceivers - LPRF SoCs - CC3000 family WiFi modules Features - XL BoosterPack connectors - EM connectors - I/O breakout - USB power supply BOOST-CCEMADAPTER Contents: 1 x EM Adapter BoosterPack Kit Price: $15 Release: Q2 2013
CC Antenna DK Antenna reference designs - PCB antennas - Chip antennas - Wire antennas 13 low cost antennas and 3 calibration boards. Frequency ranges from 136 MHz to 2.48 GHz. CC-ANTENNA-DK See also DN031 http://www.ti.com/lit/swra328
CC Debugger Debugger probe and programming tool for all 8051-based CCxxxx RF SoCs and CC85xx Can control CCxxxx Low Power RF transceivers PC Tools: SmartRF Studio SmartRF Flash Programmer IAR EW8051 CC-DEBUGGER Available for $49
MSP430 Experimenter s Boards MSP430FG4618 MSP430F2013 Supports selected Low Power RF Evaluation Modules MSP430F5438 Do not support SmartRF Studio Perfect for prototyping with MSP430 and LPRF transceivers Software libraries and RF stacks available on the web
PC Tools
SmartRF Studio PC Tool available for FREE SmartRF Studio can be used together with TI s development kits for all CCxxxx RF-ICs. Converts user input to associated chip register values RF frequency Data rate Output power Allows remote control/configuration of the RF device when connected to the PC via a SmartRF Evaluation Board Supports quick and simple performance testing Continous RX/TX (for antenna testing etc.) Packet RX/TX
SmartRF Studio
SmartRF Packet Sniffer Captures and parses packets going over the air Useful debugging tool for any RF protocol and SW designer PC Tool available for FREE Supported protocols Bluetooth low energy ZigBee RF4CE ZigBee 2007/PRO SimpliciTI Generic protocol (raw data) The Sniffer s product page (www.ti.com/tool/packet-sniffer) lists all the hardware required for packet sniffing
SmartRF Packet Sniffer
SmartRF Flash Programmer Program the flash on all TI Low Power RF System-on- Chips Program IEEE 802.15.2 MAC addresses or individual bytes Powerful command line interface Can program any MSP430s and CC430 using either the MSP-FET430UIF or the ez430 Emulator Dongle Can also be used to update the firmware on the TI evaluation boards
PurePath Wireless Configurator Easy to use PC tool to configure the behavior of the CC85xx devices Configures e.g. audio interface, sample rate, I/O mapping Customize the CODEC register settings Generates a firmware image that can be programmed on the device
PurePath Wireless Commander Free graphical PC tool for production testing and controlling the CC85xx audio ICs over the external host interface Test Features Continuous RX and TX Packet Error Rate test Audio test Regulatory compliance testing Pre-pairing
Extras
Tools Sharepoint https://spsemea.itg.ti.com/sites/lpw/tools/default.aspx