TABLE OF CONTENTS SECTION ACCREDITATION PAGE 1 INTRODUCTION Terms and conditions of sale General features SIN711-2 5 7 Manufacturing standards SIN711-2 8 2 DESKS Shells Desks with pedestal(s) Desks with pedestal(s) and convex front (CX) Extended desks with straight cut and pedestal Extended desks with curved cut and pedestal Arched desks SIN 711-2 13 SIN 711-2 14 SIN 711-2 18 SIN 711-2 22 SIN 711-2 26 SIN 711-2 30 3 RETURNS Empty returns Reversible returns Returns with pedestal(s) Returns with combination pedestal Returns with lateral filing cabinet Returns with cabinet Bridges SIN 711-2 31 SIN 711-2 32 SIN 711-2 33 SIN 711-2 36 SIN 711-2 39 SIN 711-2 42 SIN 711-2 44 4 5 6 TABLES Arched tables D, P and Q tables (without end gable) D and P tables Extended D tables Extended P tables D tables with modesty panel P tables with modesty panel Extended D tables with modesty panel Extended P tables with modesty panel End tables Hook tables CREDENZAS SIN 711-2 45 SIN 711-2 46 SIN 711-2 47 SIN 711-2 48 SIN 711-2 49 SIN 711-2 50 SIN 711-2 51 SIN 711-2 52 SIN 711-2 53 SIN 711-2 54 SIN 711-2 55 Credenzas with pedestal(s) SIN 711-2 56 Credenzas with combination pedestal(s) SIN 711-2 60 Credenzas with lateral file drawers SIN 711-2 62 Credenzas with cabinet SIN 711-2 65 Combination credenzas SIN 711-2 67 Server credenzas SIN 711-2 69 Transaction tops SIN 711-2 70 HUTCHES AND WALL STORAGE Cabinet hutches SIN 711-2 71 Cabinet hutches with glass or plexiglass doors SIN 711-2 73 Corner hutches SIN 711-2 76 Wall hutches SIN 711-2 77 Wall hutches with pigeon hole unit SIN 711-2 78 Hutches with glass or plexiglass doors SIN 711-2 79 Hutches with retractable doors SIN 711-2 80 Hutches with glass or plexiglass doors and pigeon hole unit SIN 711-2 81 Hutches with retractable doors and pigeon hole unit SIN 711-2 82 Hutches with hinged doors SIN 711-2 83 Hutches with hinged doors and pigeon hole unit SIN 711-2 84 Open hutches SIN 711-2 85 Open hutches with pigeon hole unit SIN 711-2 86 Hutches with adjustable shelves SIN 711-2 87 Tackboards SIN 711-2 88 1
TABLE OF CONTENTS 6 HUTCHES AND WALL STORAGE ACCREDITATION PAGE Tackboards for hutches Tackboards and display boards SIN 711-2 89 SIN711-20 90 7 8 CORNER TABLES Corner tables LATERAL TABLES Lateral tables Lateral tables with corner cut Lateral tables with curved cut SIN 711-2 91 SIN 711-2 92 SIN 711-2 94 SIN 711-2 96 9 EXTENDED CORNER TABLES Straight extended corner tables Curved extended corner tables 10 COMBINATION PEDESTALS AND LATERAL FILING CABINETS Factory-installed pedestals Independent pedestals Mobile pedestals Combination pedestals and lateral filing cabinets 98 100 SIN 711-2 102 SIN 711-2 104 SIN 711-2 106 SIN 711-2 107 11 12 BOOKCASES AND CABINETS Corner bookcases Bookcases Display cases Form holders 1-door cabinets Cabinets with 1 glass door 2-door cabinets Cabinets with 2 glass doors Wardrobes Wardrobes with glass or plexiglass doors Wardrobes with pedestals Multiple units "EZZY" PARTITIONS Introduction to the EZZY product series Category A partitions Category B partitions Category C partitions Category D partitions Category E partitions Category F partitions Category G partitions Category H partitions Category I partitions Plexiglass options Shelf options Miscellaneous options Accessories for the EZZY series SIN 711-3 108 SIN 711-3 109 113 SIN 711-3 114 SIN 711-3 115 SIN 711-3 116 SIN 711-3 118 SIN 711-3 120 SIN 711-3 122 SIN 711-3 126 SIN 711-3 128 SIN 711-3 130 137 146 150 155 158 162 166 170 174 178 182 183 184 185 13 RECEPTION STATIONS (includes stations from the ''Receptions'' brochure) "Spheric" reception stations (Ref: ''Receptions'', REC1 layout) "Smartflex" reception stations (Ref: ''Receptions'', REC2 layout) "Manhattan" reception stations (Ref: ''Receptions'', REC3 layout) "Liber-T" reception stations (Ref: ''Receptions'', REC4 layout) "C" reception stations ( Ref: ''Receptions'', REC5 layout) "GEO" reception stations (Ref: ''Receptions'', REC6 layout) "L" reception stations "Gallery" reception stations (Ref: ''Receptions'', REC7 layout) SIN711-2 186 SIN711-2 192 SIN711-2 199 SIN711-11 202 SIN711-11 215 SIN711-11 218 SIN711-11 221 SIN711-11 222 2
TABLE OF CONTENTS 13 RECEPTION STATIONS (includes stations from the ''Receptions'' brochure) ACCREDITATION PAGE SIN711-11 225 SIN711-2 236 "Gallery" reception stations "Manhattan" reception stations 14 15 HOSPITALITY AND CONFERENCE TABLES All-purpose rectangular tables Rectangular tables with tubular legs Rectangular tables on metal base Hospitality tables Kalypso hospitality tables Elliptic conference tables "Racetrack" conference tables Boat-shaped conference tables with rounded end Rectangular conference tables Round tables Round tables on metal base Square tables SIN711-11 274 CONFERENCE TABLE ACCESSORIES Conference boards SIN711-11 238 SIN711-11 239 SIN711-2 240 SIN711-11 241 SIN711-11 243 SIN711-11 244 SIN711-11 251 SIN711-11 258 SIN711-11 265 SIN711-11 272 SIN711-11 273 SIN711-2 275 Lecterns SIN711-20 276 Mobile service carts Connector tops SIN711-2 277 SIN711-2 278 16 17 ACCESSORIES Handles Metal legs Keyboard trays CPU holders Computer monitor brackets, clamp installation Computer monitor brackets, grommet installation Suspended storage systems Miscellaneous ELECTRICITY Introduction Calculating amperage Communication boxes for single stations Communication boxes for multiple stations Misc. items for connecting communication components Electricity for 4-track system Electricity for 8-track system SIN711-2 279 SIN711-11 280 SIN711-2 284 SIN711-2 285 286 287 SIN711-2 288 SIN711-3 289 SIN711-11 291 SIN711-11 292 SIN711-11 296 SIN711-11 297 SIN711-11 298 SIN711-11 299 SIN711-11 300 3
PLEASE AFFIX YOUR FEDERAL GOVERNMENT ACCREDITATION FORM HERE FOR MORE INFORMATION, PLEASE CONTACT YOUR MANUFACTURER'S REPRESENTATIVE 4
TERMS AND CONDITIONS OF SALE PRICES The prices are "suggested retail" and are subject to changes without notice. Applicable taxes are not included. If you have an open and active account with Logiflex, merchandise will be invoiced at the prices prevailing at the time of shipment. Advanced payment for your order may be requested if the opening of your account has not been completed or if your account has become inactive. TERMS OF PAYMENT Net 30 days / F.O.B. Sherbrooke (Québec), Montréal (Québec) or Québec City (Québec). The invoice will be dated the same ship date and payable 30 days from that date including applicable freight charges. Mobilier de bureau Logiflex remains the owner of the merchandise until the invoice is paid in full. CUSTOMIZED PRODUCTS (SPECIAL ITEMS) Price requests for customized products or special items can be submitted via the "Online services" section of our Web site, at www.mobilierlogiflex.com. Our quotations department will study your request and send you a quotation and a technical drawing for approval as soon as possible. Modifications to quotations or technical drawings can be requested the same way. The approved quotation(s) and technical drawing(s) can then be attached to your purchase order. ORDERS An official purchase order must be issued for all purchases. Your purchase order must contain the following information: your company letterhead, your reference number, the delivery address (with contact name and phone number), the complete product codes, furniture colour(s), quantities, descriptions, retail prices and net prices, project registration number (if applicable), and your approved quotation and technical drawing (for special items). Please note that a quotation cannot serve as a purchase order. RETURNS All returns must first be approved by Logiflex. If the return is accepted, A Logiflex customer service representative will send you an official return authorization form in order to facilitate procedures between you, the carrier, and the Logiflex merchandise reception clerk. Additional costs for shipping or other expenses may be applied following any merchandise returns. MODIFICATIONS AND/OR CANCELLATIONS You have 48 hours from the time we acknowledge receipt of your order to make any requests for corrections or modifications. You may modufy or cancel your order during this same 48-hour period. If you would like to modify or cancel your order after this 48-hour verification period, please check with a Logiflex customer service representative. Orders cannot be changed or cancelled if production has already begun or if Logiflex has already received the raw materials. LIABILITY Logiflex's responsibility ends once the carrier has delivered all items in good condition. A delivery receipt signed by the customer acknowledges that the shipment is complete and has been received in good condition. CLAIMS Logiflex recommends inspecting the shipment before signing the carrier's delivery receipt. You must notify Logiflex of any incomplete shipments or damaged furniture as soon as possible. Requests to replace damaged products can be made via the "Online services" section of our Web site, at www.mobilierlogiflex.com. Our after-sales service department will examine your request and help you correct the situation as rapidly as possible. 5
TERMS AND CONDITIONS OF SALE CHANGES Logiflex reserves the right to make changes to the materials, accessories, components, specifications and designs, and to discontinue collections and/or models, at any time and without prior notice. STORAGE AND/OR SHIPPING FEES If you would like to delay the delivery of an order already in production at Logiflex, weekly storage fees may be charged. The suggested retail prices in this list usually include delivery to your warehouse, for several Quebec regions; however, some conditions may apply. If the minimum amount of your order is $10,000 net, the order can be shipped directly to your customer. In this case, a 53-foot unloading dock must be available at the time of delivery. This information must first be validated with your Logiflex customer service representative. Direct shipping is subject to additional fees. Any delay experienced by Logiflex carriers during delivery may also incur additional charges. WARRANTY Logiflex guarantees its products for ten years from the date invoiced to the distributor. This guarantee applies only to faults or defects resulting from normal use of the product and is limited to the repair or replacement of said product, at Logiflex's discretion. Logiflex is not responsible for damage resulting from abusive use or unauthorized modifications. All furniture items are inspected and verified at the time of packaging; any breakage at delivery time should be reported immediately to the carrier for damage claim at destination point. 6
GENERAL INFORMATION GENERAL FEATURES QUICK SHIP PROGRAM Products available for the quick ship program are identified by the above icon. The icon also appears beside the codes of items offered through this program in the different sections of this price list. HANLDES Handles are included for the majority of furniture items with façades (with the exception of hutches, for which handles are sold as options). The standard handle style, when included, is HJAB (black). GROMMETS Grommets are included for some items, such as lateral, end, corner, extended-corner and arc tables, returns, and reception stations. When grommets are included, the standard style is the ELPF grommet. LOCKS LKBL (black) locks are included for some items, such as pedestals, lateral file drawers, cabinets, wardrobes, combination units and credenzas. To specify a different type of lock, please refer to the accessories section at the end of this price list to see the different models offered by Logiflex. PEDESTALS All drawers are made of black Medium density fiberboard (MDF) with an average thickness of 7/16". Type "D", "E" and "F" pedestals include a black polyvinyl chloride (PVC) extrusion for easy finger grip operation (no handle). DRAWER FRONTS A PVC strip 2.5 mm thick is systematically applied along all drawer front edges. WOOD GRAIN The wood grain is always vertical on façades and furniture doors. Logiflex cannot guarantee that the wood grain will match up on HPL surfaces that are more than 144 inches (12 feet) long. HUTCHES All hutches have a grommet at the bottom and a round grommet at the back of the unit for light fixture wires. FINISHES You must specify the desired finish(es) for each item of furniture ordered. Please make your selection(s) from the Logiflex chart. FABRICS You must specify the fabric when the item so requires. Please make your selection(s) from the Logiflex chart. LEVELLERS All furniture items (except bridges) sit on black adjustable levellers, 1" in diameter, allowing for up to 1" adjustment for the purposes of levelling the furniture. The standard finished height for work surfaces is 29". ACCESS DOORS (AD) FOR CONFERENCE TABLE BASES An access door can be added to each conference table base, where permitted by the type of base. If applicable, the access door option (AD) will be offered on the specifications sheet of the conference table in question. This information can be found in the "How to order" section of the conference table specifications pages in this price list. Access door in each base of the table Channel 7
GENERAL INFORMATION MANUFACTURING STANDARDS STANDARD TYPES OF MODESTY PANELS MINISTER MODESTY PANELS (MID AND MIDC OPTIONS) PM (10'' from the surface) SM (18-1/2'' from the surface) FM (full height) MID option (straight minister) MIDC option (curved minister) CONVEX SURFACES DESK WITH RECESSED MODESTY 4 5/8'' 6'' Regular rectangular surface Convex surface (CX) 30" depth: 4-5/8'' standard recess 36" depth: 6'' standard recess GROMMET POSITIONING Returns Desks and credenzas centered grommet (GRC) centered grommet (GRC) Grommet centered in space between pedestal and end of unit (GRC) centered grommet (GRC) Left grommet (GRL) Right grommet (GRR) Left grommet and right grommet (GLR) D, P, extended and arched tables Grommet centered with end gable Grommet centered with end gable Grommet centered with end gable Grommet centered with end gable Extended corner tables Corner grommet (GRC) Corner and left grommet (GRL) Corner and right grommet (GRR) Corner, left and right grommet (GLR) BASES 1/2 leg on left and right (HH) 1/2 leg on left / Full leg on right (HR) Full leg on left / 1/2 leg on right (LH) Full legs (LR) 8
GENERAL INFORMATION MANUFACTURING STANDARDS POSITIONING OF WOOD MOULDINGS ( MAW AND MAX ) Drawings must be supplied for any orders with wood mouldings. The mouldings will be placed according to the configuration and type of furniture ordered. Shells and desks Corners Returns Extended corners with two half legs (HH) Bridges End tables Credenzas Rectangular conference tables Hutches Boat-shaped conference tables (rounded) Bookcases and cabinets "Racetrack" conference tables Combination pedestals Elliptical conference tables Filing cabinets Conference wall cabinets Multiple units Lecterns Corner hutches and bookcases Wardrobes D, P and Q tables, without gable Mobile service carts D, P and Q tables, with gable 1/2-moon and 1/4-moon end tables Arched tables Round and square tables Truncated tables 9
GENERAL INFORMATION MANUFACTURING STANDARDS POSITIONING OF PVC MOULDINGS ( MAR ) MAR mouldings must be installed on the opposite sides of a same item of furniture. They cannot be joined together perpendicularly because their edges must be cut at a 90 degree angle and not a 45 degree angle. Shells and desks D, P and Q tables Convex surfaces Corner tables Returns Extended corner tables Bridges Arched tables Credenzas End tables Hutches Round and square tables Combination pedestals, bookcases, wardrobes, multiple units and filing cabinets "Racetrack" conference tables Lecterns Boat-shaped conference tables with rounded ends Mobile service carts Conference wall cabinets 10
GENERAL INFORMATION MANUFACTURING STANDARDS EXAMPLES OF STATION CONFIGURATIONS WITH WOOD MOULDINGS ( MAW AND MAX ) U-shaped work station (against a wall) L-shaped work station (independant island) CONFIGURATION WITH 5/8'' SPACE CONFIGURATION WITHOUT SPACE In cases where no drawing is provided with your order, the wood mouldings will be installed on all three sides of the furniture, as shown above. To order your work station without any spaces, please provide us with a drawing of the desired work station. NOTE: Wood mouldings cannot be installed where two surfaces meet. A 0.05 mm PVC moulding will be installed at these locations. EXAMPLES OF STATION CONFIGURATIONS WITH PVC MOULDINGS ( MAR ) 11
GENERAL INFORMATION MANUFACTURING STANDARDS - MOULDINGS PREVIEW COMPONENT MATERIALS EDGES / MOULDINGS 1'' surfaces ( ML ) Thermofused laminate (TFL) - 1" high-density particle board 2.5 mm polyvinyl chloride (PVC) 1 1/16'' surfaces ( MLL ) High pressure laminate (HPL) - 1-1/2'' high-density particle board, 1/32" HPL sheet on surface, 1/32" balancing sheet under surface (prevents bending) 2.5 mm polyvinyl chloride (PVC) 1 5/8" surfaces ( MA ) Thermofused laminate (TFL) - 1-5/8'' highdensityparticle board 2.5 mm polyvinyl chloride (PVC) 1 5/8'' surfaces ( MAR ) Thermofused laminate (TFL) - 1-5/8'' highdensityparticle board 2.5 mm corrugated polyvinyl chloride (PVC) 1 9/16" surfaces ( MARL ) High pressure laminate (HPL) - 1-1/2'' high-density particle board, 1/32" HPL sheet on surface, 1/32" balancing sheet under surface (prevents bending) 2.5 mm corrugated polyvinyl chloride (PVC) 1 9/16" surfaces ( MAL ) High pressure laminate (HPL) - 1-1/2'' high-density particle board, 1/32" HPL sheet on surface, 1/32" balancing sheet under surface (prevents bending) 2.5 mm polyvinyl chloride (PVC) 1 5/8" surfaces ( MAW ) Thermofused laminate (TFL) - 1-5/8'' highdensityparticle board 5/16" wood moulding 1 5/8'' surfaces ( MAX ) Thermofused laminate (TFL) - 1-5/8'' highdensityparticle board 5/16" wood moulding 1 9/16" surfaces ( MAWL ) High pressure laminate (HPL) - 1-1/2'' high-density particle board, 1/32" HPL sheet on surface, 1/32" balancing sheet under surface (prevents bending) 5/16" wood moulding 1 9/16" surfaces ( MAXL ) High pressure laminate (HPL) - 1-1/2'' high-density particle board, 1/32" HPL sheet on surface, 1/32" balancing sheet under surface (prevents bending) 5/16" wood moulding Front, back and modesty Thermofused laminate (TFL) - 1-5/8'' highdensityparticle board 2.5 mm polyvinyl chloride (PVC) on showing surfaces and 0.5 mm polyvinyl chloride (PVC) on nonshowing surfaces 12
SIN711-2 tfl hpl tfl hpl SHELLS (EMPTY DESKS) MANUFACTURING STANDARD: NO GROMMET EDGES / MOULDINGS tfl hpl MAR MARL MAW MAWL Shells A B 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" 3048 446 566 546 666 780 900 30" 3060 485 635 610 760 880 1030 3066 516 681 654 819 942 1107 3072 543 723 693 873 999 1179 4-5/8" recessed modesty 36" 3660 543 723 693 873 981 1161 3666 554 752 719 917 1025 1223 3672 581 797 761 977 1085 1301 6" recessed modesty Modesty recesses: 4 5/8'' 6'' Modesty heights: PM SM FM ( 10"H ) ( 18-1/2"H ) ( Full ) M _ Serie ( A B ) () FM (STD) PM SM modesty GRL GRR GRC ELPF (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See Modesties If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge p.8 Grommet positions Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) p.8 Grommet styles ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each p.290 13
SIN711-2 tfl hpl tfl hpl DESKS WITH "D" PEDESTAL(S) ONE UTILITY DRAWER AND ONE FILE DRAWER ON LEFT AND/OR RIGHT MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET Desk with BF pedestal on left EDGES / MOULDINGS tfl hpl MAR MARL MAW MAWL A B 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" 30" D3048 681 801 781 901 1106 1226 4-5/8" recessed modesty D3060 D3066 D3072 709 859 834 984 1209 1359 721 886 859 1024 1259 1424 733 913 883 1063 1308 1488 Desk with BF pedestal on right 36" D3648 727 871 847 991 1197 1341 D3660 791 971 941 1121 1341 1521 D3666 823 1021 988 1186 1413 1611 D3672 861 1077 1041 1257 1491 1707 6" recessed modesty A B 30" 3048D 681 801 781 901 1106 1226 3060D 709 859 834 984 1209 1359 3066D 721 886 859 1024 1259 1424 3072D 733 913 883 1063 1308 1488 4-5/8" recessed modesty 36" 3648D 727 871 847 991 1197 1341 3660D 791 971 941 1121 1341 1521 3666D 823 1021 988 1186 1413 1611 3672D 861 1077 1041 1257 1491 1707 6" recessed modesty Desk with BF pedestals on left and right 30" D3060D 831 981 956 1106 1331 1481 D3066D 849 1014 987 1152 1387 1552 D3072D 868 1048 1018 1198 1443 1623 4-5/8" recessed modesty 36" D3660D 849 1029 999 1179 1399 1579 D3666D 886 1084 1051 1249 1476 1674 D3672D 957 1173 1137 1353 1587 1803 6" recessed modesty D D If pedestal If pedestal M _ ( A B ) on the left on the right Serie () FM (STD) PM SM modesty GRL GRR GRC ELPF (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p.279 14
SIN711-2 tfl hpl tfl hpl DESKS WITH "E" PEDESTAL(S) TWO UTILITY DRAWERS AND ONE FILE DRAWER MANUFACTURING STANDARDS: tfl hpl MAR MARL MAW MAWL PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET Desk with BBF pedestal on left A B 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" Desk with BBF pedestal on right Desk with BBF pedestals on left 30" E3060 823 973 948 1098 1323 1473 E3066 849 1014 987 1152 1387 1552 E3072 861 1041 1011 1191 1436 1616 E3084 875 1085 1050 1260 1525 1735 4-5/8" recessed modesty 36" E3660 861 1041 1011 1191 1411 1591 E3666 900 1098 1065 1263 1490 1688 6" recessed modesty 969 1185 1149 1365 1599 1815 1040 1292 1250 1502 1750 2002 30" 3060E 823 973 948 1098 1323 1473 3066E 849 1014 987 1152 1387 1552 3072E 861 1041 1011 1191 1436 1616 3084E 875 1085 1050 1260 1525 1735 4-5/8'' recessed modesty 6" recessed modesty E3672 E3684 A B EDGES / MOULDINGS 36" 3660E 861 1041 1011 1191 1411 1591 3666E 900 1098 1065 1263 1490 1688 3672E 969 1185 1149 1365 1599 1815 3684E 1040 1292 1250 1502 1750 2002 and right 30" E3060E 1021 1209 1234 1422 1609 1759 E3066E 4-5/8'' 1045 1251 1279 1485 1679 1844 recessed E3072E 1072 1297 1327 1552 1752 1932 modesty E3084E 1097 1360 1395 1658 1870 2080 Minister front options (MID and MIDC) 36" E3660E 1059 1284 1314 1539 1714 1894 E3666E 1097 1345 1378 1626 1803 2001 6" recessed modesty E3672E E3684E 1174 1444 1480 1750 1930 2146 1251 1566 1608 1923 2108 2360 Modesties Grommet positions Grommet styles Handles MID MIDC E E If pedestal If pedestal M _ ( A B ) on the left on the right Serie () FM (STD) PM SM MID MIDC modesty If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value p.8 Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each GRL GRR GRC ELPF (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See p.8 p.290 p.279 15
SIN711-2 tfl hpl tfl hpl DESKS WITH "F" PEDESTAL(S) TWO FILE DRAWERS MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET tfl hpl MAR MARL MAW MAWL Desk with FF pedestal on left A B 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" Desk with FF pedestal on right Desk with FF pedestals on left 30" F3060 823 973 948 1098 1323 1473 F3066 849 1014 987 1152 1387 1552 F3072 861 1041 1011 1191 1436 1616 F3084 875 1085 1050 1260 1525 1735 36" F3660 861 1041 1011 1191 1411 1591 F3666 900 1098 1065 1263 1490 1688 F3672 969 1185 1149 1365 1599 1815 F3684 1040 1292 1250 1502 1750 2002 30" 3060F 823 973 948 1098 1323 1473 3066F 849 1014 987 1152 1387 1552 3072F 861 1041 1011 1191 1436 1616 3084F 875 1085 1050 1260 1525 1735 36" 3660F 861 1041 1011 1191 1411 1591 3666F 900 1098 1065 1263 1490 1688 969 1185 1149 1365 1599 1815 1040 1292 1250 1502 1750 2002 and right 30" F3060F 1021 1209 1234 1422 1609 1759 F3066F 4-5/8'' 1045 1251 1279 1485 1679 1844 recessed F3072F 1072 1297 1327 1552 1752 1932 modesty F3084F 1097 1360 1395 1658 1870 2080 Minister front options (MID and MIDC) 4-5/8" recessed modesty 6" recessed modesty 4-5/8'' recessed modesty 6" recessed modesty 36" F3660F 1059 1284 1314 1539 1714 1894 F3666F 1097 1345 1378 1626 1803 2001 F3672F 1174 1444 1480 1750 1930 2146 F3684F 1251 1566 1608 1923 2108 2360 6" recessed modesty 3672F 3684F EDGES / MOULDINGS MID Modesties Grommet positions Grommet styles Handles MIDC F F If pedestal If pedestal M _ ( A B ) on the left on the right Serie () FM (STD) PM SM MID MIDC modesty If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each GRL GRR GRC GLR ELPF (STD) HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See p.8 p.8 p.290 p.279 16
SIN711-2 tfl hpl tfl hpl DESKS WITH "E" AND "F" PEDESTALS EDGES / E: TWO UTILITY DRAWERS AND ONE FILE DRAWER MOULDINGS F: TWO FILE DRAWERS tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET Desk with BBF pedestal on left A B 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" and FF pedestal on right 30" E3060F 1021 1209 1234 1422 1609 1759 E3066F 1045 1251 1279 1485 1679 1844 4-5/8" recessed E3072F 1072 1297 1327 1552 1752 1932 modesty E3084F 1097 1360 1395 1658 1870 2080 Desk with FF pedestal on left 36" E3660F 1059 1284 1314 1539 1714 1894 E3666F 1097 1345 1378 1626 1803 2001 E3672F 1174 1444 1480 1750 1930 2146 E3684F 1251 1566 1608 1923 2108 2360 6" recessed modesty and BBF on right 30" F3060E 1021 1209 1234 1422 1609 1759 F3066E 1045 1251 1279 1485 1679 1844 4-5/8'' recessed F3072E 1072 1297 1327 1552 1752 1932 modesty F3084E 1097 1360 1395 1658 1870 2080 Minister front options (MID and MIDC) 36" F3660E 1059 1284 1314 1539 1714 1894 F3666E 1097 1345 1378 1626 1803 2001 F3672E 1174 1444 1480 1750 1930 2146 F3684E 1251 1566 1608 1923 2108 2360 6" recessed modesty MID MIDC FM (STD) E F PM F E SM If pedestal If pedestal ( A B ) MID M _ on the left on the right MIDC Serie () modesty GRL GRR GRC GLR (PF location) ELPF (STD) HAPF($) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p.279 17
SIN711-2 tfl hpl tfl hpl DESKS WITH "E" PEDESTAL AND CONVEX FRONT (CX) TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET CX desk with BBF pedestal on left A B C 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" 24'' E243060CX 903 1023 1003 1123 1353 1473 E243066CX 915 1047 1025 1157 1400 1532 E243072CX 927 1071 1047 1191 1447 1591 Flush modesty E303660CX 947 1097 1072 1222 1447 1597 30" E303666CX 973 1138 1111 1276 1511 1676 E303672CX 985 1165 1135 1315 1560 1740 E303684CX 999 1209 1174 1384 1649 1859 4-5/8" recessed modesty E364260CX 985 1165 1135 1315 1535 1715 36'' E364266CX 1024 1222 1189 1387 1614 1812 E364272CX 1093 1309 1273 1489 1723 1939 E364284CX 1164 1416 1374 1626 1874 2126 6" recessed modesty CX desk with BBF pedestal on right 24'' 243060ECX 903 1023 1003 1123 1353 1473 Flush 243066ECX 915 1047 1025 1157 1400 1532 modesty 243072ECX 927 1071 1047 1191 1447 1591 303660ECX 947 1097 1072 1222 1447 1597 30" 303666ECX 973 1138 1111 1276 1511 1676 303672ECX 985 1165 1135 1315 1560 1740 303684ECX 999 1209 1174 1384 1649 1859 4-5/8" recessed modesty EDGES / MOULDINGS Minister front options (MID and MIDC) 364260ECX 985 1165 1135 1315 1535 1715 36'' 364266ECX 1024 1222 1189 1387 1614 1812 6" recessed modesty 364272ECX 364284ECX 1093 1309 1273 1489 1723 1939 1164 1416 1374 1626 1874 2126 MID MIDC FM (STD) PM E E SM If pedestal If pedestal MID M _ on the left ( A B C ) on the right CX MIDC Serie () modesty GRL GRR GRC ELP (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each 18 p.8 p.8 p.290 p.279
SIN711-2 tfl hpl tfl hpl DESKS WITH "F" PEDESTAL AND CONVEX FRONT (CX) TWO FILE DRAWERS tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET EDGES / MOULDINGS CX desk with FF pedestal on left A B C 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" 24" F243060CX 903 1023 1003 1123 1353 1473 F243066CX 915 1047 1025 1157 1400 1532 F243072CX 927 1071 1047 1191 1447 1591 Flush modesty 30'' F303660CX 947 1097 1072 1222 1447 1597 F303666CX 973 1138 1111 1276 1511 1676 F303672CX 985 1165 1135 1315 1560 1740 F303684CX 999 1209 1174 1384 1649 1859 4-5/8" recessed modesty 36'' F364260CX 985 1165 1135 1315 1535 1715 F364266CX 1024 1222 1189 1387 1614 1812 F364272CX 1093 1309 1273 1489 1723 1939 F364284CX 1164 1416 1374 1626 1874 2126 6" recessed modesty CX desk with FF pedestal on right 24" 243060FCX 903 1023 1003 1123 1353 1473 243066FCX 915 1047 1025 1157 1400 1532 Flush modesty 243072FCX 927 1071 1047 1191 1447 1591 30'' 303660FCX 947 1097 1072 1222 1447 1597 303666FCX 973 1138 1111 1276 1511 1676 303672FCX 985 1165 1135 1315 1560 1740 303684FCX 999 1209 1174 1384 1649 1859 4-5/8" recessed modesty Minister front options (MID and MIDC) 36'' 364260FCX 985 1165 1135 1315 1535 1715 364266FCX 1024 1222 1189 1387 1614 1812 6" recessed modesty 364272FCX 364284FCX 1093 1309 1273 1489 1723 1939 1164 1416 1374 1626 1874 2126 MID MIDC FM (STD) PM If pedestal If pedestal MID M _ on the left ( A B C ) on the right CX MIDC Serie () F F SM modesty GRL GRR GRC ELP (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each p.8 p.8 p.290 p.279 19
SIN711-2 tfl hpl tfl hpl DESKS WITH "E" OR "F" PEDESTALS AND CONVEX FRONT (CX) E: TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL F: TWO FILE DRAWERS MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET CX desk with BBF pedestals on left A B C 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" and right 24" E243060ECX 1119 1307 1332 1520 1707 1857 E243066ECX 1145 1351 1379 1585 1779 1944 Flush modesty E243072ECX 1169 1394 1424 1649 1849 2029 30'' E303660ECX 1145 1370 1400 1625 1800 1980 E303666ECX 1169 1417 1450 1698 1875 2073 E303672ECX 1196 1466 1502 1772 1952 2168 E303684ECX 1221 1536 1578 1893 2078 2330 4-5/8" recessed modesty 36'' E364260ECX 1183 1446 1481 1744 1906 2116 E364266ECX 1221 1510 1548 1837 1998 2229 E364272ECX 1298 1613 1655 1970 2130 2382 E364284ECX 1375 1743 1792 2160 2317 2614 6" recessed modesty CX desk with FF pedestals on left 24" F243060FCX 1119 1307 1332 1520 1707 1857 and right F243066FCX 1145 1351 1379 1585 1779 1944 Flush modesty F243072FCX 1169 1394 1424 1649 1849 2029 30'' F303660FCX 1145 1370 1400 1625 1800 1980 F303666FCX 1169 1417 1450 1698 1875 2073 4-5/8" recessed modesty F303672FCX F303684FCX EDGES / MOULDINGS 1196 1466 1502 1772 1952 2168 1221 1536 1578 1893 2078 2330 Minister front options (MID and MIDC) 36'' F364260FCX 1183 1446 1481 1744 1906 2116 recessed F364266FCX 1221 1510 1548 1837 1998 2229 F364272FCX 1298 1613 1655 1970 2130 2382 F364284FCX 1375 1743 1792 2160 2317 2614 MID Modesties Grommet positions Grommet styles Handles MIDC E If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each E FM (STD) PM SM MID MIDC F F If pedestal If pedestal M _ on the left ( A B C ) on the right CX Serie () modesty GRL GRR GRC ELP (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See p.8 p.8 p.290 p.279 20
SIN711-2 tfl hpl tfl hpl DESKS WITH "E" AND "F" PEDESTALS AND CONVEX FRONT (CX) E: TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL F: TWO FILE DRAWERS MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET CX desk with BBF pedestal on left A B C 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" and FF pedestal on right 24" E243060FCX 1119 1307 1332 1520 1707 1857 E243066FCX Flush 1145 1351 1379 1585 1779 1944 modesty E243072FCX 1169 1394 1424 1649 1849 2029 E303660FCX 1145 1370 1400 1625 1800 1980 30'' E303666FCX 1169 1417 1450 1698 1875 2073 4-5/8" E303672FCX 1196 1466 1502 1772 1952 2168 recessed modesty E303684FCX 1221 1536 1578 1893 2078 2330 E364260FCX 1183 1446 1481 1744 1906 2116 36'' E364266FCX 1221 1510 1548 1837 1998 2229 E364272FCX 1298 1613 1655 1970 2130 2382 E364284FCX 1375 1743 1792 2160 2317 2614 CX desk wtih FF pedestal on left 24" F243060ECX 1119 1307 1332 1520 1707 1857 and BBF pedestal on right Flush F243066ECX 1145 1351 1379 1585 1779 1944 modesty F243072ECX 1169 1394 1424 1649 1849 2029 F303660ECX 1145 1370 1400 1625 1800 1980 30'' F303666ECX 1169 1417 1450 1698 1875 2073 F303672ECX 1196 1466 1502 1772 1952 2168 F303684ECX 1221 1536 1578 1893 2078 2330 Minister front options (MID and MIDC) 6" recessed modesty 4-5/8" recessed modesty 36'' F364260ECX 1183 1446 1481 1744 1906 2116 F364266ECX 1221 1510 1548 1837 1998 2229 F364272ECX 1298 1613 1655 1970 2130 2382 F364284ECX 1375 1743 1792 2160 2317 2614 6" recessed modesty EDGES / MOULDINGS MID Modesties Grommet positions Grommet styles Handles MIDC FM (STD) PM SM MID MIDC E F F E If pedestal If pedestal M _ on the left ( A B C ) on the right CX Serie () modesty If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each GRL GRR GRC ELP (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See p.8 p.8 p.290 p.279 21
SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH STRAIGHT CUT AND "E" PEDESTAL ON LEFT TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET Desk extended to the left A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with BBF pedestal on left E30664820LB 1358 1622 1578 1842 2053 2317 30" E30724820LB 1392 1680 1632 1920 2132 2420 E30784820LB 1424 1736 1684 1996 2209 2521 E30844820LB 1456 1792 1736 2072 2286 2622 4-5/8" recessed modesty E30664824LB E30724824LB E30784824LB E30844824LB EDGES / MOULDINGS 1358 1622 1578 1842 2053 2317 1392 1680 1632 1920 2132 2420 1424 1736 1684 1996 2209 2521 1456 1792 1736 2072 2286 2622 Minister front options (MID and MIDC) 36" 6" recessed modesty E36665420LB E36725420LB E36785420LB E36845420LB E36665424LB E36725424LB E36785424LB E36845424LB 1388 1655 1636 1933 2136 2433 1422 1746 1692 2016 2217 2541 1454 1805 1747 2098 2297 2648 1486 1864 1801 2179 2376 2754 1388 1655 1636 1933 2136 2433 1422 1746 1692 2016 2217 2541 1454 1805 1747 2098 2297 2648 1486 1864 1801 2179 2376 2754 MID MIDC FM (STD) PM E SM pedestal M _ ( A B C D ) MID on the left LB MIDC Serie () modesty GRL GRR GRC GLR ELPF HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p.279 22
SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH STRAIGHT CUT AND "E" PEDESTAL ON RIGHT TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET EDGES / MOULDINGS Desk extended to the right 30" A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with BBF pedestal on right 20486630ELB 1358 1622 1578 1842 2053 2317 4-5/8" recessed 20487230ELB 1392 1680 1632 1920 2132 2420 modesty 20487830ELB 1424 1736 1684 1996 2209 2521 20488430ELB 1456 1792 1736 2072 2286 2622 36" 6" recessed modesty 24486630ELB 24487230ELB 24487830ELB 24488430ELB 20546636ELB 20547236ELB 20547836ELB 20548436ELB 1358 1622 1578 1842 2053 2317 1392 1680 1632 1920 2132 2420 1424 1736 1684 1996 2209 2521 1456 1792 1736 2072 2286 2622 1388 1655 1636 1933 2136 2433 1422 1746 1692 2016 2217 2541 1454 1805 1747 2098 2297 2648 1486 1864 1801 2179 2376 2754 Minister front options (MID and MIDC) 24546636ELB 24547236ELB 24547836ELB 24548436ELB 1388 1655 1636 1933 2136 2433 1422 1746 1692 2016 2217 2541 1454 1805 1747 2098 2297 2648 1486 1864 1801 2179 2376 2754 MID MIDC FM (STD) PM SM MID MIDC E ( A B C D ) pedestal M _ LB on the right Serie () modesty GRL GRR GRC ELPF (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail / each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p.279 23
SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH STRAIGHT CUT AND "F" PEDESTAL ON LEFT TWO FILE DRAWERS tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET Desk extended to the left A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with FF pedestal on left F30664820LB 1358 1622 1578 1842 2053 2317 30" F30724820LB 1392 1680 1632 1920 2132 2420 F30784820LB 1424 1736 1684 1996 2209 2521 F30844820LB 1456 1792 1736 2072 2286 2622 4-5/8'' recessed modesty F30664824LB F30724824LB F30784824LB F30844824LB EDGES / MOULDINGS 1358 1622 1578 1842 2053 2317 1392 1680 1632 1920 2132 2420 1424 1736 1684 1996 2209 2521 1456 1792 1736 2072 2286 2622 Minister front options (MID and MIDC) 36" 6" recessed modesty F36665420LB F36725420LB F36785420LB F36845420LB F36665424LB F36725424LB F36785424LB F36845424LB 1388 1655 1636 1933 2136 2433 1422 1746 1692 2016 2217 2541 1454 1805 1747 2098 2297 2648 1486 1864 1801 2179 2376 2754 1388 1655 1636 1933 2136 2433 1422 1746 1692 2016 2217 2541 1454 1805 1747 2098 2297 2648 1486 1864 1801 2179 2376 2754 MID MIDC FM (STD) GRL PM GRR F SM GRC ELPF (STD) MID GLR HAPF($) pedestal M _ ( A B C D ) LB MIDC on the left (PF location) (PF style) Serie () modesty grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p.279 24
SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH STRAIGHT CUT AND "F" PEDESTAL ON RIGHT TWO FILE DRAWERS tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET Desk extended to the right A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with FF pedestal on right 20486630FLB 1358 1622 1578 1842 2053 2317 30" 20487230FLB 1392 1680 1632 1920 2132 2420 20487830FLB 1424 1736 1684 1996 2209 2521 20488430FLB 1456 1792 1736 2072 2286 2622 4-5/8" recessed modesty 1358 1622 1578 1842 2053 2317 1392 1680 1632 1920 2132 2420 1424 1736 1684 1996 2209 2521 1456 1792 1736 2072 2286 2622 36" 20546636FLB 1388 1655 1636 1933 2136 2433 20547236FLB 1422 1746 1692 2016 2217 2541 20547836FLB 1454 1805 1747 2098 2297 2648 20548436FLB 1486 1864 1801 2179 2376 2754 6" recessed modesty 24486630FLB 24487230FLB 24487830FLB 24488430FLB EDGES / MOULDINGS Minister front options (MID and MIDC) 24546636FLB 24547236FLB 24547836FLB 24548436FLB 1388 1655 1636 1933 2136 2433 1422 1746 1692 2016 2217 2541 1454 1805 1747 2098 2297 2648 1486 1864 1801 2179 2376 2754 MID MIDC F ( A B C D ) pedestal M _ LB on the right Serie () FM (STD) PM SM MID MIDC modesty GRL GRR GRC ELPF (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each p.8 p.8 p.290 p.279 25
SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH ROUNDED CUT WITH "E" PEDESTAL ON LEFT TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET EDGES / MOULDINGS Desk extended to the left A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with BBF pedestal on left E30664820RB 1358 1622 1578 1842 2053 2317 30" E30724820RB 1392 1680 1632 1920 2132 2420 4-5/8" recessed E30784820RB 1424 1736 1684 1996 2209 2521 modesty E30844820RB 1456 1792 1736 2072 2286 2622 Minister front options (MID and MIDC) 36" 6" recessed modesty E30664824RB E30724824RB E30784824RB E30844824RB E36665420RB E36725420RB E36785420RB E36845420RB E36665424RB E36725424RB E36785424RB E36845424RB 1358 1622 1578 1842 2053 2317 1392 1680 1632 1920 2132 2420 1424 1736 1684 1996 2209 2521 1456 1792 1736 2072 2286 2622 1388 1655 1636 1933 2136 2433 1422 1746 1692 2016 2217 2541 1454 1805 1747 2098 2297 2648 1486 1864 1801 2179 2376 2754 1388 1655 1636 1933 2136 2433 1422 1746 1692 2016 2217 2541 1454 1805 1747 2098 2297 2648 1486 1864 1801 2179 2376 2754 MID MIDC FM (STD) PM SM MID MIDC E pedestal M _ ( A B C D ) RB on the left Serie () modesty GRL GRR GRC GLR ELPF HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p.279 26
SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH ROUNDED CUT WITH "F" PEDESTAL ON LEFT TWO FILE DRAWERS tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET EDGES / MOULDINGS Desk extended to the left A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with FF pedestal on left F30664820RB 1358 1622 1578 1842 2053 2317 30" F30724820RB 1392 1680 1632 1920 2132 2420 F30784820RB 1424 1736 1684 1996 2209 2521 F30844820RB 1456 1792 1736 2072 2286 2622 4-5/8" recessed modesty 36" 6" recessed modesty F30664824RB F30724824RB F30784824RB F30844824RB F36665420RB F36725420RB F36785420RB F36845420RB 1358 1622 1578 1842 2053 2317 1392 1680 1632 1920 2132 2420 1424 1736 1684 1996 2209 2521 1456 1792 1736 2072 2286 2622 1388 1655 1636 1933 2136 2433 1422 1746 1692 2016 2217 2541 1454 1805 1747 2098 2297 2648 1486 1864 1801 2179 2376 2754 Minister front options (MID and MIDC) F36665424RB F36725424RB F36785424RB F36845424RB 1388 1655 1636 1933 2136 2433 1422 1746 1692 2016 2217 2541 1454 1805 1747 2098 2297 2648 1486 1864 1801 2179 2376 2754 MID MIDC F pedestal M _ on the left ( A B C D ) RB Serie () FM (STD) PM SM MID MIDC modesty GRL GRR GRC ELPF (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p.279 27
SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH ROUNDED CUT WITH "E" PEDESTAL ON RIGHT TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET EDGES / MOULDINGS Desk extended to the right A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with BBF pedestal on right 20486630ERB 1358 1622 1578 1842 2053 2317 30" 20487230ERB 1392 1680 1632 1920 2132 2420 20487830ERB 1424 1736 1684 1996 2209 2521 4-5/8" recessed modesty 20488430ERB 1456 1792 1736 2072 2286 2622 Minister front options (MID and MIDC) 36" 6" recessed modesty 24486630ERB 24487230ERB 24487830ERB 24488430ERB 20546636ERB 20547236ERB 20547836ERB 20548436ERB 24546636ERB 24547236ERB 24547836ERB 24548436ERB 1358 1622 1578 1842 2053 2317 1392 1680 1632 1920 2132 2420 1424 1736 1684 1996 2209 2521 1456 1792 1736 2072 2286 2622 1388 1655 1636 1933 2136 2433 1422 1746 1692 2016 2217 2541 1454 1805 1747 2098 2297 2648 1486 1864 1801 2179 2376 2754 1388 1655 1636 1933 2136 2433 1422 1746 1692 2016 2217 2541 1454 1805 1747 2098 2297 2648 1486 1864 1801 2179 2376 2754 MID MIDC FM (STD) PM SM MID MIDC E ( A B C D ) pedestal M _ RB on the right Serie () modesty GRL GRR GRC GLR ELPF (STD) HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p.279 28