User Manual Wireless Mobile and PC to TV GWAVR PART NO. M1228 www.iogear.com 1
2013 IOGEAR. All Rights Reserved. PKG-M1228 IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without notice. IOGEAR assumes no responsibility for any inaccuracies or errors that may appear in this document.
Table of Contents Introduction 4 Package Contents 5 System Requirements 5 Overview 6 Hardware Installation 7 Connect with Intel WiDi 11 Connect with Miracast 12 Connect with non-miracast device (ios/all other Android based) 16 Advance Settings 19 Specification 23 Federal Communication Commission Statement (FCC) Statement 24 Limited Warranty 25 3
Introduction IOGEAR's GWAVR allows you to enjoy all of your personal and online content wirelessly on your big screen HDTV. Using your smart phone, tablet or WiDi notebook you can sit back and experience your favorite movies, videos, photos, online shows and more in full HD on your HDTV with great image, clarity and sound. In today's lifestyle of mobility and wireless, the GWAVR is the next step in connectivity for your wireless Audio / Video entertainment. Supports the latest WiFi technology: Wi-Fi Miracast - Also known as "Screen Mirroring" for Samsung devices* Streaming Screen Capture from Wi-Fi Miracast compatible device (such as smartphone / tablet / notebook) Intel WiDi Streaming Screen Capture from Intel WiDi notebook Works with non-miracast Devices Using the Free App "imediashare Personal" you can stream your personal photos, videos, music and more wirelessly to your HDTV. Note: You can also use the Free App Flipps to stream online videos and live content. *Miracast / Screen Mirroring devices: - Samsung has introduced Screen Mirroring (based on Miracast), which is incorporated into most of Samsung s high-end smart mobile devices including the GALAXY S III, GALAXY S IV, GALAXY Note 10.1, and GALAXY Note II - New LG Optimus G - New HTC One - Google Nexus 4 - Sony Xperia T Note: For a list of known Miracast-certified devices, please visit: http://www.wi-fi.org/wi-fi-certified-miracast%e2%84%a2 4
Package Contents 1 x Wireless A / V Receiver 1 x Power Adapter 1 x Quick Start Guide 1 x Warranty/Registration Card System Requirements PC / Intel WiDi Technology: Intel WiDi compatible laptop with 3rd Gen Intel Core i3/i5/i7 2.0 GHz processor (CPU) and above, and Intel WiDi Technology (Version 3.5 and higher) 2GB of system memory (RAM) - 3GB (RAM) recommended Microsoft Windows 7 and Windows 8.x Wi-Fi CERTIFIED Miracast : Wi-Fi Miracast enabled mobile devices - Samsung AllShare Certified Devices Non-Certified Devices may use the imediashare Personal free App (IOS/Android) TV: Flat-panel (LCD / Plasma / DLP) TV display or Projector with HDMI or DVI port (DVI adapter not included) TV or audio system with HDMI 5
Overview 1. Power LED This LED is lit blue when the power adapter is plugged into the USB Micro-B Port. 2. USB Type A This port is reserved for service and future upgrades. 3. Mode Button Press this button twice to go from WiDi/Miracast and AirFun modes. 4. HDMI Type-A Port (Display) Connect the HD display to this port to display an image. 5. USB Micro-B Port (Power) Connect the power adapter to this port to supply power to the device. 1 2 Mode Micro USB HDTV 3 4 5 6
Hardware Installation Step 1 Connect the Power Adapter to the GWAVR s Micro-B Port. Step 2 Connect the display to the GWAVR s HDMI port using an HDMI cable. HDMI Cable Mode Micro USB HDTV USB Cable Power Adapter 7
Contect with Intel WiDi Step 1 Turn on your HDTV and select the correct input source. Plug GWAVR's power adapter into the power outlet and it will boot up in the Intel WiDi/Miracast mode and your TV will show Ready for Connection. 8
Step 2 With your laptop, launch the Intel WiDi software from your desktop or under the Programs menu. 9
Step 3 Use the Intel WiDi application to locate and connect to the GWAVR. *To update to latest Intel WiDi version, please visit: http://www.intel.com/support/wireless/wtech/iwd/sb/cs-031109.htm 10
Step 4 The fi rst time you wirelessly connect your laptop to the GWAVR, you will need to enter a security code displayed on the TV. Input that code into the Intel WiDi application window on your laptop. Your TV is now displaying your laptop screen wirelessly (in about 10~15 seconds). 11
Connect with Miracast Step 1 Turn on your HDTV and select the correct input source. Plug GWAVR's power adapter into the power outlet and it will boot up in the Intel WiDi/Miracast mode and your TV will show Ready for Connection. 12
Step 2 Find the wireless screen mirroring application on your Wi-Fi certified Miracast tablet or smartphone. The name and location of the application may differ from device to device. *Note: For a list of known Miracast-certified devices, please visit: http://www.wi-fi.org/wi-fi-certified-miracast%e2%84%a2 13
Step 3 Launch the wireless screen mirroring device to find and connect to the GWAVR. Example of Samsung Galaxy SIV shown below: Go to Settings, select Screen Mirroring, and then turn it on. Select GWAVR. Connect to GWAVR. Your device is now connected. 14
Your TV is now displaying your mobile device wirelessly. 15
Connect with non-miracast device (ios/all other Android based) Step1 Go to the App store and download free app imediashare Personal. Step 2 Turn on your HDTV and select the correct input source, and apply power to the GWAVR. Then press the Mode button twice until the AirFun screen appears with Ready for Connection. 16
Step 3 Turn on your device s WiFi and connect to the GWAVR network. (Device number after GWAVR may vary).* *Note: Use the Advanced Settings to set up WiFi connection under Network Setup (page 20). Step 4 Open and launch the imediashare Personal application. Your device can now wirelessly stream your personal photos, videos, music, and more to your HDTV using the application. 17
Step 5 To play a video, select the video and then select it to play on the GWAVR screen. Your video is now playing on your HDTV. Step 6 To stream videos on demand and live content, go to the app store on your device and install the free app Flipps. Once you have connected GWAVR to an available network using the Advanced Settings (page 19), you will be able to stream online and live content.* *Note: Your device has to be connected to the same wireless network as the GWAVR in order to stream the online videos and live content on the Flipps app. 18
Advanced Settings: Step 1 To change the advanced settings on the GWAVR, you will need to connect to the GWAVR by using your smartphone/ tablet wireless connection: Step 2 Open your web browser on your smartphone/tablet and key in the address on the TV screen. This is the remote that will control the Advanced Settings. 19
Step 3 Click on the setup icon for the following category setups: Network, Audio, Video, and System. Network setup: Device Name: To change device name on network Wi-Fi Connection: Select to connect to any available wireless network. Then select a wireless network and use the arrows on the remote to enter in the network password.* Virtual AP Setup: To configure Virtual Access Point for GWAVR with the following options: - Radio Band: setup GWAVR as 2.4Ghz or 5Ghz band - Wireless Security: Setup wireless security with Open System or WPA Key *Connect to the same wireless network you are using for all your devices. 20
Hotkey Setting Mode (HSM) Audio setup: HDMI Output: - HDMI LPCM: Linear pulse-code modulation (LPCM) is a method of encoding audio information digitally. - HDMI RAW: - HDMI Auto: Surround Sound Lip Sync (HDMI A/V Sync) Video setup: Aspect Ratio: setup the aspect ratio for the TV display with the following options - Pan Scan 4:3 - Etter Box 4:3-16:9 (default setting) - 16:10 TV System: - HDMI Auto (Default Setting) - NTSC - 480p - 720p 60Hz - 1080i 60Hz - 1080p 60Hz Scale Video Output to 90%: On/Off 1080P 24Hz: On/Off 21
System: Language: Change system languages Factory Default: reset system settings to factory default Version Info: show system version information USB Upgrade: Update system firmware by using USB drive 22
Specification: I/O LED Button Video Resolution Dimensions Mac Keyboard Emulation USB Input Micro-B Power 5V/1A x 1, USB Input Type-A Service x 1 HDMI Type-A Display x 1 WiFi 2.4G/5G Dual Band Blue - Power On Mode Switch (WiDi, Miracast, DLNA) HD up to 1080P Length x Width x Height (unit) 3.33 (84.6mm) x 2.05" (64.79mm) x 0.98" (23mm) 23
Federal Communication Commission Statement (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential setting. This product generates, uses, and can radiate radio frequency energy and, if not installed and used as directed, it may cause harmful interference to radio communications. Although this product complies with the limits for a Class B digital device, there is no guarantee that interference will not occur in a particular installation. CE Statement This device has been tested and found to comply with the following European Union directives: Electromagnetic Capability (2004/108/EC), Low Voltage (2006/95/EC) and R&TTED (1999/5/EC). 24
Limited Warranty WE RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP THIS PRODUCT? Factory Default Hotkeys Settings Make sure you: 1. Visit www.iogear.com for more product information 2. Visit www.iogear.com/support for live help and product support Warranty Information This product carries a 1 Year Limited Warranty. For the terms and conditions of this warranty, please go to http://www.iogear.com/support/warranty Register online at http://www.iogear.com/register Important Product Information Product Model Serial Number Contact IOGEAR 19641 Da Vinci, Foothill Ranch, CA92610 www.iogear.com iogear.custhelp.com support@iogehjar.com 25
2013 IOGEAR