Maximo Super Diesel Engine Oil SAE Grade 15W/40 API CH-4/SJ Performance Level ACEA E3/B4/A3, MAN M3275, MB 228.3/229.1, VOLVO VDS-2, CUMMINS 20071/72, RVI RD, MIL-PRF- 2104G. Product Description Maximo Ultra Diesel Engine Oil is blended with highly refined paraffinic base stock and superior detergent and dispersant additive package. This product supercedes all API CG- 4/SJ products in quality and performance and gives outstanding service in off and on highway to heavy and light duty vehicles. High thermal stability provides outstanding engine protection against wear and corrosion. Maximizes engine life through control on piston deposit formation. Multigrade property makes it suitable to use in all ambient temperature. Longer drain interval. Physical Characteristics Test Method Values SAE Grade 15W/40 Specific Gravity @ 60/60 o F ASTM D-4052 0.8790 K. Viscosity @ 40 o C, cst 108.50 K. Viscosity @ 100 o C, cst 14.91 Viscosity Index ASTM D-2270 143 Flash Point, COC, o C ASTM D-92 228 Pour Point, o C ASTM D-97-27 TBN mg KOH/g ASTM D-2896 9.95
Optimo Motor Oil SAE Grade 20W/50 API Performance Level Product Description SG/CD CCMC G4/PD-2 MIL-L-46152D Optima Motor Oil is designed to meet the requirements of modern high performance engines. Its high viscosity index keeps it free-flowing during cold and hot climates. Its superior detergent-dispersants properties effectively minimize lacquer and varnish formation and help cleanliness of engine. - Antiwear properties ensure long engine life for all moving parts. - Special formulation ensures superior performance - Outstanding engine protection under severe driving conditions. - Longer engine life and better fuel economy. Physical Characteristics Test Method Values SAE Grade 20W/50 Specific Gravity @ 60/60 o F ASTM D-4052 0.8880 K. Viscosity @ 40 o C, cst 164.50 K. Viscosity @ 100 o C, cst 17.85 Viscosity Index ASTM D-2270 120 Flash Point, COC, o C ASTM D-92 230 Pour Point, o C ASTM D-97-24 TBN mg KOH/g ASTM D-2896 6.65
Optimo Gold Motor Oil SAE Grade 20W/50 API Performance Level SJ/CF MB 229.1, 228.0/1 MAN 270/271 VOLVO VDS, MACK EO-L MTU/DDC TYPE-1 ALLISON-C4, VW 502/505 Porsche and BMW. Product Description Optima Gold Motor Oil has been developed using superior quality base stocks and high performance additives for stringent bench-tests and road testing in most varied operating conditions. It has been designed to meet the requirements of modern high performance engines in most severe operating conditions. - Multigrade oil for all season. - Suitable for both diesel and gasoline engines. - Excellent detergent/dispersant properties which keep engine clean. - Low oil consumption and better fuel economy. Physical Characteristics Test Method Values SAE Grade 20W/50 Specific Gravity @ 60/60 o F ASTM D-4052 0.8890 K. Viscosity @ 40 o C, cst 157.20 K. Viscosity @ 100 o C, cst 17.57 Viscosity Index ASTM D-2270 122 Flash Point, COC, o C ASTM D-92 230 Pour Point, o C ASTM D-97-24 TBN mg KOH/g ASTM D-2896 6.80
Maximo Power Diesel Engine Oil SAE Grade 50 API Performance Level Product Description CF/SF CCMC D2/D3/PD1 MIL-L-2104D,MIL-L-46152B Maximo Power Diesel Engine Oil is a blend of highly refined paraffinic base stock of high viscosity index with excellent additive package of high alkaline properties to neutralize the acidic effect of high Sulphur fuel. Maximo Power Diesel Engine oil has excellent detergency, making it particularly suitable for use supercharged engines. The special additive ingredients impart superior detergency together with high detergent, antioxidant, anticorrosion, antiwear and antifoam properties. - Resistance to deteriotion caused by oxidation. - Good anticorrosion properties. - Excellent antiwear properties ensuring long engine life. - Suitable for both diesel and petrol engines. Physical Characteristics Test Method Values SAE Grade 50 Specific Gravity @ 60/60 o F ASTM D-4052 0.9050 K. Viscosity @ 40 o C, cst 262.50 K. Viscosity @ 100 o C, cst 21.56 Viscosity Index ASTM D-2270 98 Flash Point, COC, o C ASTM D-92 248 Pour Point, o C ASTM D-97-12 TBN mg KOH/g ASTM D-2896 10.60
Maximo Diesel Engine Oil SAE Grade 50 API Performance Level CD/SF MIL-L-2104B Product Description Maximo Engine Oil is formulated with quality base oils & excellent additive package to meet the requirements of all diesel and gasoline engines operating in mild severe conditions. - Enough level of detergency & dispersancy to minimize deposit formation. - Wear protection, rust protection - Suitable for mix-fleet operation for both diesel and gasoline engine. Physical Characteristics Test Method Values SAE Grade 50 Specific Gravity @ 60/60 o F ASTM D-4052 0.8950 K. Viscosity @ 40 o C, cst 205.40 K. Viscosity @ 100 o C, cst 18.26 Viscosity Index ASTM D-2270 98 Flash Point, COC, o C ASTM D-92 250 Pour Point, o C ASTM D-97-6 TBN mg KOH/g ASTM D-2896 3.65
Optimo Diamond Motor oil SAE Grade 20W/50 API SL/CF ACEA A3-98/B3-98 issue-2/ B4-02, ACEA E2-96 issue- Performance Level 3, MB 229.1, 228.0/1, MAN 270/271, VOLVO VDS, MACK EO-L, MTU/DDC TYPE 1, ALLISON-C4. Optima Diamond 20W50 is top quality multigrade engine oil specially designed for both naturally aspirated and turbo charged passenger car engines gasoline as well as diesel. The oil is blended with selected base oils and additives to provide excellent protection against wear, corrosion and oxidation. - Superior lubrication on all parts of engine. - Polymer used reduces friction and keeps the oil thick at hotspots. - Meets and exceeds all major car manufacturers requirements. - Very stable multigrade oil due to high shear strength polymer used. Physical Characteristics Test Method Values SAE Grade 20W/50 Specific Gravity @ 60/60 o F ASTM D-4052 0.8900 K. Viscosity @ 40 o C, cst 154.12 K. Viscosity @ 100 o C, cst 17.55 Viscosity Index ASTM D-2270 125 Flash Point, COC, o C ASTM D-92 234 Pour Point, o C ASTM D-97-24 TBN mg KOH/g ASTM D-2896 7.00
Maximo Power Multigrade Diesel engine Oil SAE Grade 15W/40 API Performance Level CF-4/SG ACEA E2/B4/B3/A3, MAN 270/271, ALLISON C-4, VOLVO VDS, MB 228.1/229.1. Maximo Power Multigrade Oil is a premium quality multigrade diesel engine oil. It is blended with superior quality paraffinic base stock in conjunction with superior additive package technology. Maximo Power Multigrade Oil is formulated for high speed, naturally aspirated and turbo charged diesel and gasoline engines. It gives outstanding service in off and on highway, heavy and light duty vehicles. It has excellent TBN retention property which provides good protection against piston ring sticking, bearing corrosion, varnish accumulation, oil thickening and accelerated engine wear. The excellent additive package of detergent-dispersant, anti-wear and antioxidant provides long engine life under severe operating conditions. Physical Characteristics Test Method Values SAE Grade 15W/40 Specific Gravity @ 60/60 o F ASTM D-4052 0.8780 K. Viscosity @ 40 o C, cst 110.50 K. Viscosity @ 100 o C, cst 14.70 Viscosity Index ASTM D-2270 130 Flash Point, COC, o C ASTM D-92 232 Pour Point, o C ASTM D-97-24 TBN mg KOH/g ASTM D-2896 9.90
SAE Grade 20W/40 Maximo Multigrade Diesel Engine Oil API CD/SF Performance Level MIL-L-2104B Product Description Maximo Multigrade Engine Oil is formulated with quality paraffin base oils & excellent additive package and is suitable for all diesel/gasoline engines operating in mild to severe conditions. - It has good level of detergency & dispersancy - Wear protection, rust protection - Multi fleet oil for both diesel and gasoline engine. - Multigrade property makes it suitable to use at different ambient temperature. Physical Test Values SAE Grade 20W/40 Specific Gravity @ ASTM D- 0.893 K. Viscosity @ 40 o C, ASTM D- 136.3 K. Viscosity @ 100 o C, ASTM D- 14.75 Viscosity Index ASTM D- 109 Flash Point, COC, o C ASTM D-92 220 Pour Point, o C ASTM D-97-12 TBN mg KOH/g ASTM D- 3.60
HYDRAULIC OIL AW ISO Viscosity Grade: 32, 46, 68, 100 Hydraulic oils AW are premium quality anti-wear hydraulic oils formulated with solvent refined high VI base stock blended with anti-wear, anti-foam additives and rust inhibitors. Hydraulic Oil AW is recommended for wide range of mobile and stationary hydraulic systems operating under severe conditions. It can also be used in circulation systems and general purpose machine lubrication and compressors where it is recommended. Excellent thermal stability and anti-wear property. Resistance to oxidation. Excellent water separation and air release properties. Hydraulic Oil AW meets and exceeds the requirements Sperry Vickers, Denison HF-0, Racine, Sundstrand, Lucas & Din 51524 Part II. ISO Grade 60/60 F K. Viscosity, cst Visc. Index ASTM D-2270 Pour point, C ASTM D-4052 40 C 100 C ASTM D-92 ASTM D-97 32 0.875 31.50 5.385 104 218-36 46 0.8775 45.12 6.741 102 224-27 68 0.8819 64.95 8.489 101 238-27 100 0.8855 98.89 11.31 100 248-24
HYDRAULIC OIL HAW ISO Viscosity Grade: 32, 46, 68, 100, 150. Hydraulic Oil HAW is premium quality hydraulic oil formulated with anti-wear additive and high shear stable viscosity improver to maintain viscosity/temperature characteristics. Hydraulic Oil HAW is specially recommended for hydraulic and fluid transmission systems subjected to wide variation in temperature. : Excellent oxidation and thermal stable. Wide operating temperature range. Maintain original viscosity at high temperature. Good water separation and air release properties. Hydraulic Oil HAW meets and exceeds the requirements of Sperry Vickers, Denison HF-0, HF-1, HF-2, Racine, Sundstrand, Lucas & Din 51524 Part II. ISO K. Viscosity, cst Visc. Index Pour point, Grade 60/60 F ASTM D- C ASTM D-4052 40 C 100 C 2270 ASTM D-92 ASTM D-97 32 0.869 31.85 6.319 154 180-36 46 0.8815 46.52 8.251 153 220-30 68 0.8842 65.59 10.65 152 218-30 100 0.8896 105.6 15.22 151 220-27 150 0.8945 147.9 19.45 151 220-24
CIRCULATION OIL ISO Viscosity Grade: 46, 68, 100, 150, 220, 320, 460 Circulation oil is a general purpose lubricant made from highly refined solvent high viscosity index paraffinic base stock. It provides excellent performance in systems where heavy duty operation is not required. Circulation Oil can be used in enclosed industrial gears, anti-friction bearings, light duty hydraulic system, spur, helical and bevel gears operating under moderate loads. Good thermal and oxidation stability. Economical product for general purpose applications. Good water separation characteristics. ISO Grade 60/60 F K. Viscosity, cst Visc. Index ASTM D-2270 Pour point, C ASTM D-4052 40 C 100 C ASTM D-92 ASTM D-97 46 0.8783 46.80 6.713 95 220-9 68 0.8819 67.50 8.48 95 238-9 100 0.887 102.1 11.25 95 258-9 150 0.8895 149.5 14.53 95 264-6 220 0.8932 221.6 18.79 95 282-6 320 0.8986 325.8 24.21 95 294-6 460 0.9029 463.8 30.42 95 306-6
COMPRESSOR OIL ISO Viscosity Grade: 32, 46, 68,100 Compressor oil is made of highly refined base oil blended with anti-oxidant and anti-rust additives. The product has good demusification properties and readily separate out with water. Compressor Oil is recommended for rotary screw, vane, centrifuge and reciprocating multi and single stage air compressor. : Excellent thermal and oxidation stability. Good air release property. Good demulsibility and protection against wear. Compressor oil meets and exceeds DIN 51506 VDL. : ISO Grade 60/60 F K. Viscosity, cst Visc. Index ASTM D-2270 Pour point, C ASTM D-4052 40 C 100 C ASTM D-92 ASTM D-97 32 0.8700 31.25 5.32 102 216-12 46 0.8730 45.47 6.77 102 226-9 68 0.8770 68.10 8.74 100 240-9 100 0.8800 101.50 11.45 99 256-9
CIRCULATION OIL (R & 0) ISO Viscosity Grade: 32, 46, 68, 100 A mineral based general circulation oil formulated with quality base oil and anti-oxidant, anti-rust, anti-foam additives. Circulation Oil (R & 0) is recommended for wide range of lubrication applications such as plain bearings, anti-friction bearings and parallel shaft gears in moderate industrial applications. It can also be used in light to moderate non-antiwear hydraulic systems, non-ep gear lubrication and some compressor applications. Excellent oxidation and rust prevention ability. Excellent wear protection for longer equipment life. Good water separation characteristics. ISO Grade 60/60 F K. Viscosity, cst Visc. Index ASTM D-2270 Pour point, C ASTM D-4052 40 C 100 C ASTM D-92 ASTM D-97 32 0.869 30.62 5.214 100 218-9 46 0.875 42.50 6.425 100 222-6 68 0.880 65.80 8.540 100 238-3 100 0.883 97.80 11.21 100 254-3
TURBINE OIL ISO Viscosity Grade: 32, 46, 68 Turbine Oil are premium quality lubricants formulated with very high quality base oil and advanced additive technology system to provide excellent lubrication of steam, gas turbine and other industrial applications. Turbine Oil are also recommended for used in electric power generation, pump stations, non-antiwear hydraulic system, bearing & gear lubrication and some marine applications. Excellent oxidation stability. Excellent water separation and air release. Anti-corrosive and rust property. Longer drain interval and equipment life Turbine Oil meets the requirement of General Electric GEK-32568 A, Solar, Dresser Clark & Ruston. ISO Grade 60/60 F K. Viscosity, cst Visc. Index ASTM D-2270 Pour point, C ASTM D-97 ASTM D- 4052 40 C 100 C ASTM D-92 32 0.869 30.60 5.220 100 218-12 46 0.875 44.20 6.585 100 224-9 68 0.880 65.65 8.510 100 242-9
GEAR GUARD SAE Viscosity Grade: 90, 140 Gear Guard lubricants are refined mineral oils intended for use in manual transmission of light vehicles, rear axle, steering boxes operating under mild conditions. Good oxidation stability. Superior rust and corrosion protection. Gear Guard meets and exceeds API Performance Level GL-1. SAE Grade 60/60 F ASTM D- K. Viscosity, cst Visc. Index ASTM TAN, mg KOH/g ASTM D-974 ASTM D-92 Pour point, C ASTM D-97 4052 40 C 100 C D-2270 90 0.897 198.5 17.50 95 0.02 270-6 140 0.904 497.5 32.05 95 0.02 300-6
GEAR GUARD SAE Viscosity Grade: 90, 140, 80W/90 Gear Guard are automotive gear lubricants formulated from high performance base oil and advance EP additive technology. Lubricants are suitable for commercial and automotive manual transmissions, axles, final drive of passenger cars, light and heavy trucks where protection against scoring is required. Superior thermal and oxidation stability. Excellent protection against rust, corrosion and wear. Good load carrying capability. Prolongs gear life. Gear Guard meets and exceeds API Performance Level GL-4 and MIL-L-2105B. SAE Grade 60/60 F K. Viscosity, cst Visc. Index ASTM TAN, mg KOH/g Pour point, C ASTM D- 4052 40 C 100 C D-2270 ASTM D-974 ASTM D-92 ASTM D-97 90 0.8950 172.8 16.01 95 0.68 226-18 140 0.9032 358.1 25.80 95 0.68 242-15 80W/90 0.8959 146.5 14.60 98 0.68 218-27
GEAR GUARD SAE Viscosity Grade: 90, 140 Gear Guard is automotive gear oil made from paraffinic base stock fortified by EP additive. It is suitable for automotive manual transmissions; drive axles, final drive of passenger cars, trucks, and heavy vehicles. Longer gear life and oil drain. Excellent operation under shock-loads, high speed/low torque and low speed/high torque. Gear Guard meets and exceeds API Performance Level GL-5 SAE Grad 60/60 F K. Viscosity, cst Visc. Index ASTM TAN, mg KOH/g Pour point, C e ASTM D- 4052 40 C 100 C D-2270 ASTM D-974 ASTM D-92 ASTM D-97 90 0.901 187.5 17.04 96 1.55 224-18 140 0.915 412.5 28.60 96 1.55 240-15
EP GEAR LUBE ISO Viscosity Grade: 68, 100, 150, 220, 320, 460 EP Gear Guard lubricants are premium extreme pressure industrial gear oils containing anti-oxidant, anti-corrosion, anti-wear and anti-foam additives. EP Gear Guard offers exceptional performance in gears and other industrial applications. EP Gear Guard are recommended for all types of industrial gear both enclosed and open and also suitable for lubrication of system containing worm gears, bearings, sliding parts etc. Excellent oxidation and thermal stability. Effective rust and corrosion protection. Good demulsibilty and anti-foam characteristics. Superior load carrying capability. Prolong gear life. EP Gear Guard meets performance requirements of AGMA 9005-D94, David Brown ET33/88 and US Steel 224, DIN 51517 Part 3. ISO Grade 60/60 F K. Viscosity, cst Visc. Index ASTM Pour point, C ASTM D-4052 40 C 100 C D-2270 ASTM D-92 ASTM D-97 68 0.882 67.50 8.65 99 218-27 100 0.890 98.65 11.25 100 224-24 150 0.895 147.5 14.75 99 234-21 220 0.897 216.8 19.15 99 248-18 320 0.898 316.1 24.39 98 254-18 460 0.903 455.8 30.73 97 272-12