MARKS USA CUSTOM LOCKSET DIVISION

MARKS USA CUSTOM LOCKSET DIVISION Marks USA Custom Lockset Division product is manufactured with the quality engineered mechanical locksets that carry our Lifetime Mechanical Warranty. These products are non-stocked due to the large array of both designs and finishes and thus require longer lead times and minimum order quantities. This catalogue is only a sampling of the designs that can be supplied. Standard mortise & tubular lock trim are usually stocked and are available in normal lead times. Table of Contents: Stainless Steel Investment Cast Levers.............................2-14 Stainless Steel Tubular Levers.....................................15-19 Standard Mortise & Tubular Lock Trim & Rose Styles.................20 Custom Forged Brass Levers......................................21 Turnpieces.....................................................22 Custom Forged Brass Trim........................................23 Custom Escutcheon Plates........................................24-26 Lifetime Mechanical Limited Warranty MARKS USA warrants that its products are free from defects in materials and workmanship. This warranty is limited to the lifetime of the door on which our lock is installed. In the event our product does not conform to this warranty, MARKS USA will repair or replace the product free of charge. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-marks products or parts. We reserve the right to make changes in materials, components or manufacturing methods. Liability under all warranties expressed or implied is limited to replacement of the defective goods. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages. Additionally, the company will not warrant ANSI A156.2 Grade 2 lever product installed in educational facilities and student housing. HI-SECURITY Common pin tumbler cylinders may be compromised by picking, drilling or key bumping. For applications where a greater security level is required, we suggest using drill/pick resistant cylinders with multiple pin planes such as those with sidebars. Marks USA HI-SECURITY Cylinders are constructed with sidebars and are drill, pick and bump resistant. Page 1 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA

STAINLESS STEEL INVESTMENT CAST LEVER HANDLE FOR GRADE 1 MORTISE & TUBULAR LOCKSETS SF001 SF002 4-23/32" SF003 4- SF004 2-3/8" 2-3/8" SF005 SF006 5-9/16" SF007 SF008 5" 3-1/16" 2-3/16" SF009 SF010 4-11/16" 5-15/16" SF011 SF012 4-5/8" MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA Page 2

STAINLESS STEEL INVESTMENT CAST LEVER HANDLE FOR GRADE 1 MORTISE & TUBULAR LOCKSETS SF013 SF014 4-1/2" 4-13/16" SF015 SF016 4-3/16" 4-13/16" 2-11/16" SF017 SF018 4-15/16" 2-15/16" SF019 SF020 5-11/16" SF021 SF022 2-15/16" SF023 SF024 Page 3 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA

STAINLESS STEEL INVESTMENT CAST LEVER HANDLE FOR GRADE 1 MORTISE & TUBULAR LOCKSETS SF025 5" SF026 2-23/32" SF027 SF029 2-15/16" 5" 2-15/16" SF030 SF031 4-3/4" 2-23/32" 5-1/16" SF032 SF033 2-23/32" 2-15/16" SF034 SF035 5-5/8" 2-23/32" SF035A SF036 2-23/32" MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA Page 4

STAINLESS STEEL INVESTMENT CAST LEVER HANDLE FOR GRADE 1 MORTISE & TUBULAR LOCKSETS SF037 SF037A SF038 SF040 5-3/8" 2-7/8" SF041 SF042 SF043 SF044 5-11/16" 2-1/4" SF045 SF046 4-23/32" 2-23/32" 4-5/8" SF047 SF048 2-15/16" 2-19/64" Page 5 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA

STAINLESS STEEL INVESTMENT CAST LEVER HANDLE FOR GRADE 1 MORTISE & TUBULAR LOCKSETS SF049 SF050 5-5/32" 2-15/16" 4-23/32" SF051 2-5/16" SF053 2-3/8" SF054 SF055 5-11/16" 5" 2-3/32" SF056 SF057 5" 2-7/8" 5-11/16" 2-7/8" SF058 5-1/4" SF059 2-5/16" 2-7/8" SF060 SF061 4-1/2" 5" MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA Page 6

STAINLESS STEEL INVESTMENT CAST LEVER HANDLE FOR GRADE 1 MORTISE & TUBULAR LOCKSETS SF062 5-1/16" 2-3/32" SF063 SF064 4-7/8" SF065 5-3/16" 3-3/16" SF067 3" SF068 4-15/16" SF069 SF070 4-1/2" 2-3/16" SF071 4-21/64" 2-3/16" SF072 4-21/64" SF073 4-21/64" 2-3/16" SF074 2-1/4" Page 7 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA

STAINLESS STEEL INVESTMENT CAST LEVER HANDLE FOR GRADE 1 MORTISE & TUBULAR LOCKSETS 4-21/64" SF075 2-3/16" 4-11/16" SF076 2-3/8" SF077 SF078 4-5/8" 5-19/32" 4-3/4" SF080 2-15/16" SF081 4-27/32" SF082 5- SF083 4-15/16" 4-7/8" SF084 2-5/16" 4- SF085 2-1/8" SF086 SF087 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA Page 8

STAINLESS STEEL INVESTMENT CAST LEVER HANDLE FOR GRADE 1 MORTISE & TUBULAR LOCKSETS SF088 SF089 2-3/16" SF090 SF091 5" SF092 SF093 5-1/16" 2-1/16" 2-11/16" SF094 SF095 6" 2-11/16" SF096 SF097 4-7/32" 2" 4-23/32" SF098 SF099 5-9/32" 2-3/32" Page 9 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA

STAINLESS STEEL INVESTMENT CAST LEVER HANDLE FOR GRADE 1 MORTISE & TUBULAR LOCKSETS SF100 SF101 2-3/8" 5-13/64" 2-21/32" SF102 SF103 4-3/8" 5-3/16" SF104 SF105 5-15/16" 2-3/8" 4-11/16" SF106 SF107 4-1/2" 2-3/16" 4-5/8" SF108 SF109 4-1/2" 2-3/16" 4-9/16" SF110 SF111 6-7/64" 2-3/16" MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA Page 10

STAINLESS STEEL INVESTMENT CAST LEVER HANDLE FOR GRADE 1 MORTISE & TUBULAR LOCKSETS SF112 SF113 2-3/16" SF114 SF115 SF116 SF117 4-27/32" 2-7/8" SF118 SF119 5-19/32" 2-7/8" SF120 SF121 6" 5-13/16" 2-11/16" SF122 SF123 5-9/32" Page 11 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA

STAINLESS STEEL INVESTMENT CAST LEVER HANDLE FOR GRADE 1 MORTISE & TUBULAR LOCKSETS SF125 SF126 5" SF127 SF128 3" SF130 SF131 4-1/8" 3" SF132 SF133 5-3/16" SF134 SF135 SF136 SF137 2-11/16" MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA Page 12

STAINLESS STEEL INVESTMENT CAST LEVER HANDLE FOR GRADE 1 MORTISE & TUBULAR LOCKSETS SF138 SF139 4-15/16" 2-15/16" 5-9/32" SF140 SF141 5-15/64" 5-5/64" SF142 SF144 5-23/64" 4-27/32" 2-15/16" SF145 SF146 8-1/16" 3-1/16" 6-1/2" SF147 SF148 5-25/64" SF149 SF150 5" 4-15/16" 2-15/16" Page 13 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA

STAINLESS STEEL INVESTMENT CAST LEVER HANDLE FOR GRADE 1 MORTISE & TUBULAR LOCKSETS SF151 SF152 SF153 SF154 5-11/16" 2-23/32" 5-3/4" 2-23/32" SF155 SF156 5-5/32" 2-27/32" SF157 SF158 3-3/8" 4-21/32" SF160 SF161 LH23 LH32 5" 2" MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA Page 14

STAINLESS STEEL TUBULAR LEVERS FOR TUBULAR LOCKSETS SD001 SD002 2" SD002A SD002B SD003 2-15/16" SD004 SD005 SD006 4-23/32" SD007 SD008 SD009 SD010 Page 15 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA

STAINLESS STEEL TUBULAR LEVERS FOR TUBULAR LOCKSETS SD011 SD012 SD013 SD014 5-11/16" SD015 SD015A 5" 5" SD016 SD017 SD018 SD019 SD020 SD021 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA Page 16

STAINLESS STEEL TUBULAR LEVERS FOR TUBULAR LOCKSETS SD022 SD023 SD024 SD025 SD026 3-1/2" SD027 SD028 SD029 5-29/32" SD030 SD031 7-23/32" 3-29/32" 3-11/32" SD032 SD033 5-25/64" Page 17 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA

STAINLESS STEEL TUBULAR LEVERS FOR TUBULAR LOCKSETS SD034 2-23/32" SD035 5-13/16" SD036 2-7/8" SD037 SD038 5-29/32" SD039 3-3/16" SD040 SD041 SD042 4-15/16" SD043 SD046 SD047 4-27/32" MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA Page 18

STAINLESS STEEL TUBULAR LEVERS FOR TUBULAR LOCKSETS SD048 SD049 5-29/32" 2-3/32" SD050 SD051 4-15/16" 3" 3" SD052 SD053 3" SD054 SD056 5-25/64" 2-11/16" SD057 SD058 2-23/32" 2-23/32" SD062 SD063 2-7/8" 2-9/32" 2-11/16" SD066 SD064 4-23/32" 5-3/16" Page 19 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA

STANDARD MORTISE & TUBULAR LOCK TRIM & ROSE STYLES 2-1/4" 2-1/4" ROSE RR ROSE Rw ROSE RS ROSE Rx NOTE: Roses are available in a wide variety of finishes ROSE RQ 1/2" ROuND 10 2-1/4" STaNhOpE 5644 plaza 82 3" 4-1/2" 4" 4-1/2" 2-3/16" Ball 20/30 3" MONacO 57 Dayton 83 1/2" EclipSE 60 TOwNE 72 2-1/4" 4" crescent 86 3-1/8" 4-1/2" 2" MaDiSON 52 2" 3-3/4" MaxwEll 77 2" 4-1/4" american 92 4-1/2" 4-1/4" 4-1/2" OMNi 78 TiTaN 96 2-7/8" MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA Page 20

CUSTOM FORGED BRASS LEVERS 5321 5601 4-3/4" 4-3/8" 5636 5681 4-1/2" 3-1/2" 2-5/16" 5671 PL-AL 4-3/16" 3-15/16" 5-5/8" 2-11/16" 5678 PL-AR 4-1/4" 2-5/16" 5-5/8" 2-11/16" 5348 BA-L 5" 2-5/16" 4-5/8" Page 21 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA

TURNPIECES OPTION CODE T1 Base Metal: Brass & Stainless Steel OPTION CODE T2 Base Metal: Stainless Steel OPTION CODE T3 Base Metal: Zinc 27/32" 15/16" 1-5/8" 1-3/8" OPTION CODE T4 Base Metal: Brass & Stainless Steel 15/16" OPTION CODE T5 Base Metal: Stainless Steel 15/16" 1-3/4" 2-5/16" 1-3/16" 1- OPTION CODE T6 Base Metal: Stainless Steel OPTION CODE T7 Base Metal: Brass OPTION CODE T8 Base Metal: Stainless Steel 1-1/2" 1-3/4" 1-15/16" 15/16" 15/16" 1-11/16" OPTION CODE T9 Base Metal: Stainless Steel OPTION CODE T16 Base Metal: Stainless Steel 1-3/4" 1-15/16" 15/16" 1-11/16" MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA Page 22

CUSTOM FORGED BRASS TRIM CUSTOM 1 19" 7-5/8" 3" 2-1/4" CUSTOM 2 8" 4" Page 23 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA

CUSTOM ESCUTCHEON PLATES FIGURE 1 FIGURE 2 17" 17" 3" 3" FIGURE 3 FIGURE 4 FIGURE 5 19" 16-7/8" 17" 3" 2" MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA Page 24

CUSTOM ESCUTCHEON PLATES FIGURE 6 FIGURE 7 17" 17" FIGURE 8 FIGURE 9 FIGURE 10 17" 17" 12" 2" 2" Page 25 MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA

CUSTOM ESCUTCHEON PLATES FIGURE 11 FIGURE 12 10-1/2" 8" 2" FIGURE 13 FIGURE 14 9-1/4" 8" 2-1/4" FIGURE 15 FIGURE 16 8" 8" 2" 2" MARKS USA www.marksusa.com 631-225-5400 1-800-526-0233 Fax: 631-225-6136 2013, Marks USA Page 26