GLOBAL RETAIL SOLUTION Research, great experience, regulation and design innovation: these are the elements that allow Dixell to offer controllers and supervising systems that are in the forefront for all commercial and industrial refrigeration applications, air conditioning and catering fields. A series of specific solutions and a comprehensive range that extends from Thermometers to Multifunction Controllers, from Supervising Systems to the Call Centers, for a completely centralized plant. In particular, Dixell systems are a range designed to satisfy all quality, user friendliness and efficiency requirements for every kind of application. Dixell, with its systems, integrates and coordinates all components of system regulation in order to optimize the efficiency and to increase energy savings. Some of Dixell instruments that allow this are: - the innovative suction pressure management of compressor rack s through CRO - the dew point check and the modular management of anti-sweat heaters - the load supervising and the electric consumption peak management In addition the typical functions of a monitoring system: - the temperature recording according to HACCP regulations - the transmission and management of regulation and plant alarms CALL CENTER XWEB5000 XCENTER XWEB3000 XWEB500 - XWEB500D XWEB300D 12
Results prove that Dixell systems are in synergy with all regulation components ensuring: - better performance - greater efficiency - a complete local and remote monitoring - maximum environmental preservation XCENTER, the centralized management software ideally suited for a modern and organized Call Center, completes the range of products. A powerful and affordable instrument that allows a remote plant monitoring. APPLICATIONS PETROL STATIONS STORAGE CENTRES SUPERMARKETS HYPERMARKETS PRODUCTION PLANTS INDUSTRIES LIGHTING CONDITIONING AIR ENERGY SAVINGS REFRIGERATION 13
XCENTER: CENTRALIZED MANAGEMENT SOFTWARE FOR CALL CENTER APPLICATIONS: designed and developed in order to monitor plants that are positioned in different zones, XCENTER is a flexible, reliable and userfriendly software package. Efficient assistance is a widespread requirement among distribution centers, small and big supermarkets, industrial plants etc. XCENTER gives this type of support with alarm management, continuous devices check and the recipient management with a relative report. XCENTER doesn t have limits regarding the number of plants and controllers that can be checked and is suitable for every kind of requirement. (via dial-up or an internet provider) HOW TO ORDER XCENTER X C E N T E R - A B 0 0 0 A N of server N of client 0 = 0 A = 1 N = 0 B = 2 L = 10 B 14
XCENTER INSTALLATION LAYOUT Applications (supermarkets, distribution centres...) Statistic management Keep alive test XWEB or third party systems Alarm and historical data sending Centralized management software Repair process management Add-on modules on demand Alarm resent to service personnel The software is composed of two modules: server and client. The server can be installed in a computer with the following minimum system requirement: - 1GB RAM - 100GB hard-disk space - Microsoft Windows XP or Windows 2003 Server - Permanent Internet connection - Modem connection (optional) The software clients are installed in each computer, they can operate either via an intranet or the Internet. Minimum system requirements for the clients are: - CPU Pentium or similar - 512MB RAM memory - 20GB hard-disk space - Microsoft Windows XP - Network card and/or modem - Microsoft Internet explorer 5.5 or higher XCENTER INSTALLATION Access via LOCAL PC THIRD PARTY SERVER Access via LOCAL PC INTERNET E-MAIL SMS Access via REMOTE PC 15
ALARM MANAGEMENT XCENTER introduces a complete new concept regarding alarm management. An alarm that keeps on repeating itself, or that happens during night time, can be treated with a different severity. The default level of severity can be increased according to the duration, the frequency, the time of the day. COMMANDS AND PARAMETERS The XCENTER user is authorized to interact with the controller directly from the program or it has the possibility to be connected to the XWEB and start using it just like via the browser. For every alarm the software creates a report to describe the complete history of the alarm. It is possible to add notes, collect a log file of the commands that has been sent and finally a form with all the information regarding the alarm can be filled in. Later, by retrieving this information, the operator will be able to have a complete overview of what happened. CONTACTS XCENTER uses a list of recipients to be contacted for local, regional and national events. Based on need, and according to the alarm severity, the right person will be alerted. GRAPHICS Alarms are displayed together with the log of the past 48 hours of the controller functions. It s possible to determine and understand the kind of problem and decide how and when intervene. 16
USER INTERFACE The user interface is simple to understand, being similar to many proprietary software interfaces. The main window is updated in real time to display any new alarms. It is possible to group together different alarms and filter them to highlight critical situations. KEEP ALIVE Keep Alive function is meant to check periodically the hardware status of the monitored installation to ensure reliability also to critical devices. GEO-LOCATION Thanks to the mapping technology, it is possible to place your installations on a real geographic map. This feature lets the user quickly find information regarding any installation that sends an alarm. Each installation is marked on the map by an icon that changes colour to red when in alarm. STATISTICS XCENTER is provided with several models that generate powerful statistical tools, used to analyze frequent alarms, critical device installations or sites. The statistics are useful to prevent critical product or plant situations. There is also the possibility user requirements, it s possible to add others statistical models on the XCENTER. 17