2010 ANSYS SOUTH AMERICAN CONFERENCE & ESSS USERS MEETING

2010 ANSYS SOUTH AMERICAN CONFERENCE & ESSS USERS MEETING October 19-22, 2010 Bourbon Atibaia Spa Resort - Atibaia, SP - Brazil Organization: Final Program Sponsors:

uu WELCOME uu KEYNOTE SPEAKERS The ANSYS SOUTH AMERICAN CONFERENCE & ESSS USERS MEETING is the most traditional discussion forum for users of simulation-driven product development software in South America. During the course of four days, engineers, designers and researchers will have the opportunity to exchange ideas and experiences in Computer Aided Engineering (CAE) and to improve their engineering simulation skills through free workshops, training courses, technical presentations, plenary sessions, and ask the expert session. Join us and find out how innovative companies, universities and R&D centers have been applying engineering simulation software to improve processes and reduce their product development cycle time. FEM Technical Speakers Ahmad Haidari Industry Marketing Director Tim P. Pawlak Corporate Fellow Marius Rosu Product Manager for the Electromechanical Product Line Martin Vogel Sr. Member of the Technical Staff Judd Kaiser Workbench Framework Product Manager John Favier Founder & CEO DEM Solutions Julien Manera Senior Application Engineer Free Field Technologies Management Tracks Bernardo Beling Director of Technology IMPSA Pedro Mendes CAE Coordinator - Subsea Technology CENPES-Petrobras Sergio Butkewitsch Choze General Manager for Turbogenerators and Computer Systems VSE - Vale Soluções em Energia S.A. Javier Schmal Managing Director Martin Engineering South America Gil de Ferran Team President and Co-Owner de Ferran Dragon Racing www.esss.com.br/usersmeeting Luka Onesti Chief Technology Officer Esteco

uu CONFERENCE AT-A-GLANCE uu October 19 uu October 20 uu October 21 uu October 22 8:00 Registration Open 8:00 TRAINING COURSES ASK THE EXPERT 8:00 TRAINING COURSES FREE WORKSHOPS 8:00 FREE WORKSHOPS 8:30 TRAINING COURSES Page 4 Page 8 Page 4 Page 9 Page 9 Page 4 10:00 REFRESHMENTS IN EXHIBITION AREA 10:20 TRAINING COURSES 12:20 LUNCH 13:30 TRAINING COURSES Page 4 10:50 REFRESHMENTS IN EXHIBITION AREA 11:10 OPENING SESSION - Clovis Maliska Jr., ESSS 11:20 Ahmad Haidari, Vision and Strategy 11:40 Sponsor - Intel 12:00 Sergio Choze, VSE Integrated Product Development at VSE - A Systems Engineering Approach 12:30 Judd Kaiser, Workbench Framework Update 13:00 LUNCH 10:50 REFRESHMENTS IN EXHIBITION AREA 11:10 Tim Pawlak, Mechanical Solutions from 11:50 Sponsor - HP 12:10 Bernardo Beling, IMPSA IMPSA: Renewable Energy and Innovation 12:40 Sponsor - SGI 13:00 LUNCH 10:50 REFRESHMENTS IN EXHIBITION AREA 11:10 technical sessions 13:00 closing lunch Page 12 Page 4 14:00 Pedro Mendes, Petrobras CAE in Subsea Engineering - Deep Simulation 14:30 Marius Rosu / Martin Vogel, Electronics Industry Simulation Solutions 14:00 Javier Schmal, Martin Engineering EDEM: A Definite Tool in Successful Tailored Solutions for Martin Engineering 14:30 Ahmad Haidari, Fluid Solutions from 15:30 REFRESHMENTS IN EXHIBITION AREA 15:50 TRAINING COURSES Page 4 15:10 Julien Manera, Free Field Technologies Vibro-acoustic and Aero-acoustic Simulation ACTRAN Overview 15:40 John Favier, DEM Solutions Harnessing the Power of EDEM 16:10 REFRESHMENTS IN EXHIBITION AREA 15:10 Gil de Ferran, de Ferran Dragon Racing The modefrontier Experience in DeFerran Dragon Racing Team 15:40 Luka Onesti, Esteco A Multidisciplinary Approach to Design Optimization 16:10 REFRESHMENTS IN EXHIBITION AREA 16:30 technical sessions 16:30 technical sessions 18:00 end of 1 st day Page 10 Page 11 18:30 CONFERENCE SOCIAL (COCKTAIL) 18:30 end of 3 rd day

uu training courses uu October 19 Room Office 2 Itupeva Valinhos Office 4 Office 3 Itu Office 1 Campinas Piracicaba 8:00-18:00 Thermal Modeling in Welding Processes Composite Materials Modeling using ANSYS Composite PrepPost Electro-mechanical System Level Simulations using Simplorer 3D Full-Wave Electromagnetic Simulation with HFSS, including Multiphysics Analysis using HFSS and ANSYS Mechanical Advanced Technologies with ANSYS Mechanical 13.0 Aeroacoustic Simulation: Flow Noise and Acoustic Propagation in Complex Mean Flow Genetic Algorithms Optimization: Application to Engineering Problems Simulating Mining Equipment using EDEM and ANSYS Fatigue Analysis using ANSYS ncode DesignLife uu October 20 Room Office 2 Itupeva Valinhos Office 4 Office 3 8:00-11:00 Thermal Modeling in Welding Processes Composite Materials Modeling using ANSYS Composite PrepPost Electro-mechanical System Level Simulations using Simplorer 3D Full-Wave Electromagnetic Simulation with HFSS, including Multiphysics Analysis using HFSS and ANSYS Mechanical Advanced Technologies with ANSYS Mechanical 13.0 uu October 21 Room Office 2 Itupeva Valinhos 8:00-11:00 Thermal Modeling in Welding Processes Composite Materials Modeling using ANSYS Composite PrepPost Electro-mechanical System Level Simulations using Simplorer

uu training courses Thermal Modeling in Welding Processes Welding is a very important manufacturing process in industry, where the types of fusion welding are very significant. This process involves high physical complexity due to the interaction of mechanical, thermal and microstructural phenomena, which can affect the joint integrity by changing the mechanical properties and the onset of residual stresses. The thermal phenomenon is considered one of the most critical one in the welding process, not only for being fundamental to the weld joint formation, but also because it is responsible for the occurrence of the mechanical and micro-structural phenomena. Furthermore, a precise representation of the heat source results in greater accuracy of the collected of thermodynamic data, and it consequently allows for a proper evaluation of the mechanical and the micro-structural behavior. This training course will cover the fundamentals for modeling the thermal phenomena in the welding process. In addition to the configuration and details related to thermal transient analyses, the resources for welding heat source modeling and proposals for simplifying the representation of geometry and heat source, involving 2D and 3D modeling of the process, will be presented. Instructor: Roberto Monteiro Basto da Silva - ESSS Schedule: October 19 to 21 Lenght: 14 hours Fee: R$ 1.650,00 (30% off for academic students). Composite Materials Modeling using ANSYS Composite PrepPost 1. Basics of Composites 2. Numerical Simulation of Composites 3. Classification and Mechanics of Materials 4. Elasticity of Laminates 5. Modeling of Composites with ANSYS Composites PrepPost 6. Additional Features in ANSYS Composites PrepPost 7. Failure criteria for Composite Material (Post-Processing) 8. Geometric Nonlinear Behavior of Composite Structure Instructor: Andrés Horacio Liberatto - ESSS / Chuck Higgins - VISTAGY, Inc. Schedule: October 19 to 21 Lenght: 14 hours Fee: R$ 1.650,00 (30% off for academic students). Electro-mechanical System Level Simulations using Simplorer 1. ANSYS Simplorer Overview 2. Creating new projects 3. Basic labs: 3 Phase Rectifier example: Basic usage flow (placing and arrange parts, define properties, working with the schematic, setting up simulation commands, simulating and viewing results) Basic DC Motor example: Using hysteresis control and introduction of state flow modeling Basic DC Motor with expanded controller: Introduction of Control Block modeling for the feedback loops Basic DC Motor using VHDL-AMS modeling PWM modeling using a variety of modeling methods: Equation Blocks, State flow diagrams, Control blocks Importing legacy schematics Instructor: Marius Rosu - Schedule: October 19 to 21 Lenght: 14 hours Fee: R$ 1.650,00 (30% off for academic students).

uu training courses 3D Full-Wave Electromagnetic Simulation with HFSS, including Multiphysics Analysis using HFSS and ANSYS Mechanical The course will focus on the use of HFSS. HFSS is used for many applications: antennas, radar cross section, microwave components, filters, connectors, printed-circuit boards, IC packages and IC components. The course is intended for engineers who may have to design or analyze such components and have little or no experience with HFSS. You will become familiar with the interface: how to create a model, simulate it and obtain the results of interest. There will be time to discuss how HFSS can simulate your particular applications. 1. Overview of HFSS 2. Several hands-on exercises featuring antennas, connectors, filters, and signal-integrity for on-board structures, alternated with explanations and short presentations 3. Link to ANSYS thermal and stress simulators 4. Discussions of applications Instructor: Martin Vogel - Schedule: October 19 to 20 Lenght: 11 hours Fee: R$ 1.300,00 (30% off for academic students). Advanced Technologies with ANSYS Mechanical 13.0 1. Load data mapping 2. Linear perturbations for pre-stress modal analysis 3. Cyclic symmetry 4. Restarts 5. Stabilization 6. Project based contact 7. Mesh connections 8. Shell thickness assignments 9. Criteria based selections 10. Beam end releases 11. Beam shear and bending diagrams Instructors: Tim Pawlak - Schedule: October 19 to 20 Lenght: 11 hours Fee: R$ 1.300,00 (30% off for academic students). Aeroacoustic Simulation: Flow Noise and Acoustic Propagation in Complex Mean Flow 1. ACTRAN/FFT Overview Aeroacoustic module (wind noise simulation) ACTRAN for Turbomachinery noise 2. Aeroacoustic theory: Lighthill and Möhring Analogies 3. Overview of the different numerical method for aeroacoustic simulations 4. Real life applications Fan Noise HVAC Noise (from publication done by VW/Audi/BMW and Visteon) Acoustic design study of an aircraft Auxiliary Power Unit 5. Aero-vibro acoustic simulations Instructor: Julien Manera - FFT ACTRAN Schedule: October 19 Lenght: 8 hours Fee: R$ 950,00 (30% off for academic students).

uu training courses Genetic Algorithms Optimization: Application to Engineering Problems This training course is recommended for engineers and designers interested in learning the fundamental concepts of optimization techniques based on genetic algorithms (GA). GA s are a particular class of algorithms based on principles of natural selection and evolution, and have been successfully applied in many engineering fields such as Automotive, Aerospace, Oil & Gas, Metallurgy, and others. The training will cover the theory behind GA s, as well as hands-on exercises with the optimization software modefrontier. 1. Optimization Introduction Basic Concepts Overview of classical optimization methods Multiobjetive optimization and the Pareto Frontier 2. Genetic Algorithms Introduction Basic Concepts Operators Classical Genetic Algorithms Non-Dominated Sorting Genetic Algorithm (NSGA) Improving performance for complex problems 3. Presentation of real case applications 4. Hands-on exercises Instructor: Ana Paula Curty Cuco - ESSS Schedule: October 19 Lenght: 8 hours Fee: R$ 950,00 (30% off for academic students). Simulating Mining Equipment using EDEM and ANSYS This training is recommended for professionals interested in simulations of bulk material handling equipment using Discrete Element Method through the software EDEM. EDEM is a user friendly CAE tool and includes powerful pre, solver and post processing tools in a integrated environment. EDEM can handle particles of different sizes and shapes, complex geometry and motion. 1. Introduction to Discrete Element Method (DEM) 2. Discrete Element tool EDEM applications 3. Using EDEM to simulate transfer chutes 4. Using EDEM to simulate vibrating screens Instructor: Daniel Schiochet Nasato - ESSS Schedule: October 19 Lenght: 8 hours Fee: R$ 950,00 (30% off for academic students). Fatigue Analysis using ANSYS ncode DesignLife 1. Fatigue Analysis of Combined WB Environments 2. Multiaxial Safety Factor Analysis: Dang Van Criterion 3. Simple SN Fatigue Life Approach using a Mountain Bike Model 4. Simple EN Fatigue Life Approach using a Mountain Bike Model 5. Frequency Domain Fatigue 6. Duty Cycle Analysis Instructor: Giovanni de Morais Teixeira - ESSS Schedule: October 19 Lenght: 8 hours Fee: R$ 950,00 (30% off for academic students).

uu ASK THE EXPERT Gain new insight and ideas from ESSS team members by asking the expert. Join us and find out how you can benefit from Simulation Driven Product Development in several areas of the industry. uu October 20 Room Campinas Itu Piracicaba 8:00 - Fluid Applications Mechanical Applications System Applications 10:50 Martin Kessler Expertise: Compressible/Incompressible Flow, Thermal Analysis Fabiano Diesel Expertise: Non-linear, Rotordynamics Guilherme Tondello Expertise: System Simulation João Aguirre Expertise: Multiphase Flow, Thermal Analysis, Reacting Flow, Turbulence Bruno Contessi Expertise: Rotating and Compressible Flow, Fluid-Structure Interaction (FSI) Carlos Breviglieri Expertise: External Aerodynamics, Compressible Flow Maurício Pacheco Expertise: Structural Analysis for Naval & Offshore/ Oil & Gas Ivan Thesi Expertise: Explicit Analysis Giovanni Teixeira Expertise: Fatigue, Explicit, Dynamic Analysis Optimization Fábio Rosenfeld Expertise: Multidisciplinary Optimization Ana Paula Cuco Expertise: Multidisciplinary Optimization Particle Simulation Daniel Nasato Expertise: Bulk Materials Handling Electronic Applications Juliano Mologni Expertise: Antennas and EMC/EMI/SI/PI in PCBs Analysis Leandro Percebon Expertise: Electric Motors/Generators and Power Transformer Analysis

uu FREE WORKSHOPS uu October 21 8:00-9:30 9:30-10:50 Itu Piracicaba Campinas Office 3 Rigid Body Dynamics Increasing Efficiency in Pre/Post-Processing High Performance Computing Increasing Productivity with ANSYS Meshing Rigid Body Dynamics on ANSYS 12 New Features on Rigid Body Dynamics ANSYS 13 Advanced Analysis in Structural Mechanics RotorDynamics Fatique with ANSYS ncode DesignLife Dynamic Analysis SpaceClaim for Mechanical and Fluid Applications (Mid-Surfaces) TGrid Wrapper ANSYS CFD Post Advanced Turbomachinery Simulation in ANSYS CFX Immersed Solid Applied to Gear Pumps Blade Editor Tool Guidelines for Mesh Generation ANSYS R13 HPC with RSM Fluent/CFX/ANSYS Mechanical for Parallel Windows HPC 2008 Beyond the Single Point Solution: Parametric Analysis for Icepak and ANSYS Fluent Icepak Parametric Simulation in ANSYS Workbench Multiple Design Point Analysis Parametric Mesh Prism Layer How to Generate Mesh in Different Bodies on ANSYS Meshing 13 Using ANSOFT Products in PCB/Antenna Design Importing ecad models to SIwave Setup and Analysis of PCBs Aiming Signal and Power Integrity Antenna Modeling Tips using HFSS uu October 22 8:00-9:30 9:30-10:50 Itu Piracicaba Campinas Office 3 Office 2 Valinhos Itupeva Engineering Knowledge Increasing Efficiency in Pre/ High Performance Computing Increasing Productivity with ANSYS Optimization with Bulk Materials Handling System Simulation with Management (ANSYS EKM) Post-Processing ANSYS R13 HPC with RSM Meshing modefrontier with EDEM Flowmaster CAE Data Management Multi-User / Multi-Project Collaboration Deployment of Best Practices for Design Automation Best Practices in Non-Linear Analysis Contact Large Deflection Convergence SpaceClaim for Mechanical and Fluid Applications (Mid-Surfaces) TGrid Wrapper ANSYS CFD Post Best Practices for Multiphase and Reacting Flow using ANSYS CFX Reacting Flow Eulerian x Lagrangian Model CEL (CFX Expression Language) Fluent/CFX/ANSYS Mechanical for Parallel Windows HPC 2008 Exploring ANSYS Fluent Advanced Features UDF (User Defined Function) Turbulence (Transition Model) Radiation Model Parametric Mesh Prism Layer How to Generate Mesh in Different Bodies on ANSYS Meshing 13 Sensors and Actuators Modeling and Mechanical System Simulation Advanced Scripting, AC Contactor Case Maxwell and Simplorer, LVDT Displacement Sensor Post Processing, Embedded Calculator Electronic and Mechanical Coupling in ANSYS Workbench Implementing your Own Optimization Algorithm in modefrontier Optimizing Hardware In-The- Loop (HIL) Systems with modefrontier and LabView Calibration of Material Properties Simulation of Aggregated Material Advanced Post-processing Automotive VTM 1: Assembling an Engine Cooling System: Radiator, Water and Oil Circuit Automotive VTM 2: Modeling Air Conditioning System and Studying Cabin Comfort. Integration with Cooling System Modeling Pressure Surge Effects and Water Hammer for Oil & Gas Industry Modeling Compressible Systems for Oil & Gas Industry

uu TECHNICAL SESSIONS uu October 20 Room Itu Office 3 Office 2 Valinhos Itupeva Piracicaba Campinas Sessions Chairs Industrial Equipments I Giovanni Morais Power Generation Ricardo Damian Marine & Offshore Maira Vargas Academic Panel Prof. Clovis R. Maliska Ricardo Barros Appliances & Turbomachinery I Rodrigo Tasca Bulk Materials Handling I Daniel Nasato Oil & Gas I João Aguirre 16:30 Static Structural Analysis (Buckling and Fatigue) to (Hydraulic Actuators - UHE JIRAU) Anderson Floriano da Cunha WTT 16:50 Evaluation of Dynamic Behaviour of The Main Fermenter Agitators by Operating Deflection Shape Analysis, Experimental Modal Analysis and Finite Element Edmilson Santos SKF do Brasil Numerical Simulation of Boron Injection in the CAREM Nuclear Reactor Juan Carlos García Comisión Nacional de Energía Atómica Application of CFX Code in Nuclear Reactor Thermal-Hydraulics at the Brazilian Nuclear Technology Development Center (CDTN) André Augusto C. dos Santos CDTN / CNEN Risers Static Analysis Using ANSYS Alfredo Gay Neto USP Gas Dispersion Analysis in Pre-salt Drilling Units Carlos Eduardo Reuther PETROBRAS ROUND TABLE: Presentation and discussion of the challenges, recent trends and evolution regarding the use of CAE tools applied to engineering education. Numerical Simulation of the Fluid- Structure Interaction Applied to the Reed Valves of a Miniaturized Compressor under High Frequency Conditions Celso Kenzo Takemori Embraco CFD Applied to Design of Open Drip-Proof (ODP) Electric Motor Cassiano Antunes Cezário WEG Motores Simulation of a Fluidized Bed Characteritics using Discrete Element Method (DEM) and Computational Fluid Dynamics (CFD) through EDEM-FLUENT Coupling Daniel Portioli Sampaio Unicamp CFD-DEM Coupling for Fluidized Bed Reactor Simulations Waldir Pedro Martignoni PETROBRAS CFD Simulation for Gas Detector Location Analysis Monica Assis da Silva Safetyeng Projetos e Consultoria Analysis Via ANSYS of Repairs on Pre-Salt Petroleum Pipelines José de Ávila Júnior UFMG 17:10 The Use of CAE Tools in the Design of Rotating Shafts Rafael Rodarte SEW EURODRIVE 17:30 Design of a Carrier for Special People Bath with ANSYS Marcelo Donato da Silva USJT 17:50 Comparation for Stresses Values Obtained by Finite Element Analysis (ANSYS) and by Strain-Gage Method Jairo João Mola Unitécnica 18:10 Simulation of Methods for Design of Industrial Valves Renata Midori Neway Assesment of Heat Exchanger Inlet Nozzle Flow Using ANSYS-CFX Delvonei Alves de Andrade IPEN-CNEN Analysis of the Flow in Reverse Tainter Gates Marcelo Dalla Corte UNISINOS Hydrokinetic Turbines Development and Scaling Up of a Spray Cooling Chamber Agustín Marticorena INVAP S.E. CFD Model of a Fast Opening Valve Using Mobile Interfaces. Comparison with Experimental Results and Parametric Analysis Lencina Luis Javier Na-Sa Numerical Simulation of Monochromatic Wave in a Ocean Base Monica Campos Silva Comparison Between Progressive and Backstep Welding Sequences by Numerical and Experimental Analysis Carlos Alexandre de Araujo Marinha do Brasil Hydrodynamic Simulation Tools Applied to Marine and Offshore Industry Maira Vargas ESSS Oil Tanker Ballast Tank Water Interchange Evaluation by Means of CFX Marcelo Rocha Martinelli PETROBRAS Panelists: Prof. Dr. Luiz Fernando L. Rodrigues Silva Chemical Engineering Program Prof. Dr. José Antônio Silveira Gonçalves UFSCar Chemical Engineering Department Prof. Dr. Gustavo Henrique B. Donato FEI Mechanical Engineering Department Windage Losses Prediction on Hydrogenerators with CFD Simulation Germán Rodolfo Mas IMPSA Surface of Flow and Force Effective Areas Applied to Development of Reciprocating Compressors Eric Hisao Murakami Embraco Nuclear Class Water Pump Stress Analysis Carlos H. B. Morais Logos Engenharia S.A. Indirect Evaluation of Contact Pressure Between Frame and Stator Core of Self Cooled Electric Motors by Means of Finite Element Models and Strain Gages Rafael Beck WEG Equipamentos Elétricos S.A. Computational Simulation of Centrifugal Washer Using Discrete Element Method (DEM) Edy Maicon Merendino Unicamp Numerical Coupling Between DEM (Discret Element Method) and FEM (Finite Element Method) Daniel Nasato Unicamp / ESSS Computer Simulation of a Vibrating Screen Leopoldo Andrés Jauriat Moya Universidad de Antofagasta CFD-DEM Modeling of the Gravel Packing Process During Petroleum Horizontal Well Completions Jairo Zago de Souza PETROBRAS / ESSS Waterhammer Evaluation for LPG and Oil Pipelines Patricia Meliande UFF ANSYS Workbench Framework as a Integration Tool in CAE Simulation Judd Kaiser Structural Analysis of a Corroded Chimney Hervandil Morosini Santanna PETROBRAS Comparison Between LES and RANS Methodologies in Slug Two-Phase Gas- Liquid Flow Computational Simulation Renato Pacheco Silva UFU

uu TECHNICAL SESSIONS uu October 21 Room Itu Piracicaba Valinhos Office 2 Itupeva Office 3 Campinas Sessions Chairs Industrial Equipments II Giovanni Morais Automotive & Aerospace I Cesareo Siqueira Industrial Process Nicolas Spogis Optimization I Rodrigo Ferraz Appliances & Turbomachinery II Rodrigo Tasca Electronics I Mateus Bonadiman Oil & Gas II Carlos Fontes 16:30 Numerical Simulation of Welding Conditions Using the Methodology of Death and Birth Thiago Vidal Valente Universidade de Brasília 16:50 Comparison Between Mechanical APDL Beam / Shell and WB Solid Analyses Renato Bezerra Leão Tresca Engenharia Design of High Performance Automotive Brake Caliper Using ANSYS Rafael Blumberg Centro Universitário da FEI Improving the Efficiency of the EAF with Bottom Stirring Bruno Augusto Batista Ribeiro Magnesita S.A. Multidisciplinary Design Optimization of a De-Boost Hybrid Motor for the Brazilian Recoverable Satellite Cristiano Queiroz Vilanova Universidade de Brasília CAE Applied to Turbomachinery Ismael Schröer Higra Industrial Ltda. Eddy Current Loss and No Load Loss in Power Transformers Anderson Santos Nunes WEG T&D Computational Fluid Dynamic Modeling and Simulation of Diesel Mixing Tanks José Roberto Nunhez Unicamp Analysis and Simulation of Rear Suspension Architecture for a Formula SAE Vehicle Using ANSYS Software Patrick Bandeira Centro Universitário da FEI CFD Modeling of Mixing and Suspension in Pulp Stock Chests for Recycling Paper Song Won Park USP Multidisciplinary Optimization of a Configuration for a Radio-Controlled Aircraft Using modefrontier Cristiano Queiroz Vilanova Universidade de Brasília Influence of the Contact Parameters on the Modeling of Valve System of Reciprocating Compressors Through the Usage of MFX Tool Eric Hisao Murakami Embraco Electromechanical Integration Using Simplorer Marius Rosu Comparison Between Analytical and Numerical Solutions for Pressure Drop in Gas-Liquid Intermittent Flow Pattern Renato Pacheco Silva UFU 17:10 Study of Dynamic Behavior of Drive System of the Third Press- MP4 Using Techniques of ODS and Numerical Simulation Danuza Santana Dias SKF do Brasil 17:30 Flange Coupling Analisys Between Shafts of a Hydrogenerator Javier Leonardo Salvador Costanza IMPSA New VW Fox Defog/Defrost Air Channel Virtual Development Tales Adriano Ferreira Volkswagen do Brasil Simulation Niterói of Water Suply Network Asthar Luana Barcelos Carvalho Suporte Consultoria e Projetos Multidisciplinary Optimization of an Ethanol Multi-Cylinder SI-Engine Bernardo Reis Dreyer de Souza Sygma Motors Vibration in Vertical Pumps - ANSYS Analysis Sérgio Loeser Sulzer Application of ANSYS in the Simulation of IEC Type Tests Applied to Low and Medium Voltage Switchboards Nestor Rueda Vallejo MSO Industrial Modeling Pipe Cold Bending: A Finite Element Approach Ivan Thesi CEFET-RJ / ESSS CFD Modelling Of Water Vapor Fogging and Deffoging Inside Automotive Headlamps Gustavo Menezes FIAT Automóveis Numerical Simulation of Heat Transfer by Natural Convection in Horizontal Finned Channels Paulo Laranjeira da Cunha Lage A Model for Multidisciplinary Design Optimization of a Medium Voltage Induction Motor Rafael Souza Barbetta WEG Equipamentos Elétricos S.A Productivity Gain through Cluster Configuration Customization - A Case Study Christian Naaktgeboren Andritz Hydro Inepar do Brasil S.A. The Influence of the Vehicle Body Front Window Angle at the Reception of GPS Signal Located on Dashboard Carlos Verre Junior Delphi Automotive Systems Methodology for Surge Pressure Evaluation in a Water Injection System Patricia Meliande UFF 17:50 Failure Analysis for the TR-117K-06 Discharge Point Drum José Cléber Rodrigues da Silva Vale Analisys of Airflow in Aircraft Cabin Fernando Stancato EMBRAER Using Numerical Simulations in the Evaluation of Food Thermal Process Pedro Augusto Unicamp Mathematical Model for Temperature Prediction in the Quenching Process of Steel Marcus Vinícius Medeiros Usiminas The MDO Experience at EMBRAER with modefrontier J Allan Antunes Lyrio EMBRAER Influence of the Mesh Characteristics in the Results Obtained on Wind Turbine Blades Mauro Grioni IMPSA Numerical Analysis on the Oil Pumping System for Reciprocating Compressors Considering Biphasic Flow Diego Sacomori Embraco Coplanar Transmission Lines with Conductor Thicknesses Thinner than the Skin Depth José Ignacio Marulanda Bernal Universidad EAFIT / PUC-Rio The Benefits of Extreme- Switches for EMC Compliance Edson Felipe Ribeiro da Fonseca Unicamp ANSYS CFD Simulation Applied to Oil & Gas Ahmad Haidari 18:10 Determination of the Stiffness of Bolted Joints Sheila Sales Massuda USP - São Carlos Structural Simulation in Instrument Cluster Francisco Oliveira Continental Ind. Automotiva Ltda Radiative Heat Transfer and Fluid Flow Simulation in a Solar Reactor Luiz Fernando L. Rodrigues Silva Design of Feed Distribution System in a Falling Film Distillation Using Computational Fluid Dynamics Ricardo Machado UFSC

uu TECHNICAL SESSIONS uu October 22 Room Itu Piracicaba Valinhos Office 2 Itupeva Office 3 Campinas Sessions Chairs Composites & Materials Technology Roberto Silva Automotive & Aerospace II Martin Kessler Bulk Materials Handling II Daniel Nasato Optimization II Rodrigo Ferraz Turbomachinery Rodrigo Tasca Electronics II Mateus Bonadiman Oil & Gas III Leonardo Rangel 11:10 Analysis Via ANSYS of Stitched Composites with Carbon Nanotubes Almir Silva Neto UFMG Structural Design of a Short Range Unmanned Aerial Vehicle (Navigator X-2 UAV) Using ANSYS APDL Pedro Luis Jiménez Soler Universidad de San Buenaventura Blast Furnace Simulation Using EDEM Guilherme Defendi Vale Integrated Environment for CFD Analysis Pedro Henrique Caruy Povoa EMBRAER Design and Analysis of a Centrifugal Compressor for a Simple Cycle Gas Turbine Elkin I. Gutiérrez Velásquez UNIFEI Comparison of Thermal Dissipation Between Different Package Models Filipe Dias Baumgratz Unicamp Comparison Between Numerical Results and PIV Experimental Data for the Gas Solid Flow in Horizontal and Vertical Ducts Rodrigo Koerich Decker FURB 11:30 Structural Analysis of Composite Wind Turbine Based on SANDIA Report Andrés Horacio ESSS / IMPSA Forecasting a Reentry Satellite Aerodynamics Nehemias Lima Lacerda FEMTO Ciências Aplicadas Ltda DEM Simulation of Particle Motion in Vertical Impact Shaft Crushers Emerson R. da Cunha Characterization of Material Properties Under Finite Strain Using an Optical Method of Measurement Antonio Carlos Guimarães Neto UFSC Computational Simulation of Multi-Stage Axial Compressor Bruno Guimarães de Montojos Horizontal Polarization of an Omnidirectional Antenna Flavio Augusto Franco Ferreira ANTENAS PLUTON Computational Simulation of Natural Convection of a Fluid With Internal Heat Generation in Square and Semi-Circular Cavities Camila Braga Vieira 11:50 Merging Analysis with Design and Manufacturing Expertise of Composites Chuck Higgins VISTAGY, Inc. Numerical Simulation of a Liquid Jet During a Tank Overfilling Event Ramon Papa EMBRAER Optimization of Raw Material Transport in a Transfer CHUTE Using EDEM Magno Antonio C. R. Silveira USIMINAS National Instruments Solutions to Hardware in the Loop Simulation Systems Marcelo Costa National Instruments Different Fuels Assessment in Gas Turbine Combustion Chamber for Pre-Mixed and Diffuse Flame Lucilene de Oliveira Rodrigues UNIFEI High Power Thermal Analysis Using HFSS and ANSYS Mechanical Integration Martin Vogel Determination of the Remaining Useful Life of the Crude Heaters of a Venezuelan Oil Company Luis Fernando Carvallo Garcia Albatros Ingenieria 12:10 Evaluation of Biomedical Implants for Use in Bone Interfaces Reconstructed by Imaging Techniques Based on Virtual Engineering Tools Clara Isabel Lopez Universidad Industrial de Santander Transient Fluid Flow Analysis Inside an Intake Manifold Applied to Diesel Engine Fábio Yukio Kurokawa MWM International Motores Analysis of a Banana Screen Using EDEM and ANSYS José Cleber Rodrigues da Silva Vale modefrontier v4.3 and Beyond: Product Roadmap Luka Onesti Esteco A Seal Wall Spacing Optimization for Secondary Airflow in Gas Turbines Using Flowmaster and ANSYS Wolodymir Boruszewski VSE / ESSS Electromagnetic Interference of a Locator in an Automotive Audio System Assited by Digital Signal Processing Juliano Mologni ESSS CFD Analysis in Conditioning Towers - Diagnose and Improvement Oscar Lino Sgrott Júnior CYCLON TECH 12:30 Composite Analysis with ANSYS Tim P. Pawlak The Usage of Dynamic Simulation of Flow in the Design of Intake Manifolds Rui Bertim de Campos Delphi Automotive Systems DEM-PBM Coupling in Modeling of Comminution Processes Rodrigo M. de Carvalho Study and Optimization of a Small Tubular Linear Motor With Permanent Magnet Cristófaro Pompermaier Embraco Radial Inflow Turbine One and Tri- Dimensional Design Analysis of 600 kw Simple Cycle Gas Turbine Engine Rubén A. Miranda Carrillo UNIFEI FR-4 Substrate Integrated Waveguide PCB at 20GHz Vanessa P. Ribeiro Magri PUC-Rio Failure Analysis in Flanges Caused by Bolt Damage or Loss Mauricio Rangel Pacheco ESSS

uu VENUE uu BOURBON ATIBAIA SPA RESORT uu SPECIAL RATES Located a little more than 50 km the city of São Paulo, the Bourbon Atibaia Spa Resort is considered one of the most modern resorts in Brazil. With one of the largest hotel convention centers in the country, it was voted the Best Resort in Brazil by the Brazilian Guide 4 Rodas 2007. Special daily rate for 2010 ANSYS South American Conference & ESSS Users Meeting. Single Room: R$ 390,00 Double Room: R$ 455,00 uu RESERVATION Covering an area of 400,000 m2, an amazing structure for leisure and conventions close to São Paulo, makes the Bourbon Atibaia the perfect option for large events and leisure trips. By staying at the Bourbon Atibaia, you are 1 hour and 40 minutes away from the Congonhas Airport and 40 minutes from Cumbica. A limited number of rooms at reduced rates is being held for attendees. Please contact Flytour for more details. E-mail: eventos.pm@flytour.com.br Phone: (11) 3318-8620 Information and Registration www.esss.com.br/usersmeeting +55 (48) 3953-0000 (11) 3046-5744 Organization Sponsors