VISIONEER USB 2.0 12 IN 1 CARD READER/WRITER USER MANUAL
INDEX Trademarks --------------------------------------------------------------------- 2 Introduction -------------------------------------------------------------------- 2 System Requirement ---------------------------------------------------------- 2 How to Setup Your Card Reader ------------------------------------------- 3 Driver Installations ------------------------------------------------------------ 3 Windows 98 & Windows 2000 Installations ------------------------ 4 Windows ME & Windows XP Installations ----------------------- 8 Mac OS Installation -------------------------------------------------------- 14 Card Slot Descriptions ------------------------------------------------------- 18 Indicator Descriptions ------------------------------------------------------- 18 Safely Remove The Card Reader ------------------------------------------ 19 Uninstall Card Reader Driver ---------------------------------------------- 20 Remove card reader driver from Windows 98 & 2000 -------------- 20 Remove card reader driver from Windows ME & XP -------------- 21 Trademarks All names and products mentioned below are registered trademarks of their respective companies. Introduction Congratulations on purchasing your new USB2.0 Multi Card Reader. It allow you to read write erase to over ten most popular memory cards with just one multi card reader. This card reader can support such as Secure Digital card (SD), Mini SD, Multi Media card (MMC), MMC-II, Compact Flash (CF), IBM Microdrive, Smart Media (SM), Memory stick (MS), Memory stick pro and MS-Duo etc memory storage cards. System requirement IBM PC or Macintosh computer with one USB connector. Windows 98/SE, Windows 2000, Windows ME, Windows XP Mac OS 8.6, OS 9.x and OS 10.12 or higher. Linux OS kernel versions 2.4.x or later.
How to Setup Your Card Reader 1. Install driver first time if your system is Windows 98/SE or Windows 2000, (Refer to the next section of driver installation) 2. Connect USB cable to your PC's USB port that usually labeled as or symbols. 3. Connect mini USB end to card reader mini USB connector. Driver installations The card reader need to setup relative driver for Windows 98SE and Windows 2000, you can find the setup disc that came with the package, and follow below steps to complete the driver installation. The reader is driver-free for Windows ME Windows XP systems, you don t have to install any driver, just connect reader to PC s USB port directly. Windows will detect and install all the associated files automatically. A "Removable Device" icon will appear on the task bar and recognized with four Removable Disk icons in My Computer window. Note1: If you need to display memory card icon on each removable disk in Windows ME or Windows XP systems, we recommend you install driver. (Please refer to following Windows ME & Windows XP driver installations) Note2: All the driver installation steps may be a little different from this guide when you using a new upgrade version O.S., in this situation please follow the Windows prompt steps to complete the installation procedure.
Windows 98 & Windows 2000 Installations 1. Close all of your exist executing file. 2. Insert driver disc into the CD-ROM drive. 3. Double click on Driver folder. 4. Double click on setup icon. 5. Click Next button to continue.
5.Check Complete item then click Next to continue. 6. Select an installation folder and click Next to continue.
7. Click Next button to continue. 8. The next window will let you know the driver has completed loading. Click Finish to finalize the driver installation. Then you need to restart your computer.
9. Reboot your computer and connect your card reader; The Window will detect and display four media identity icons in My Computer, now you can insert your memory card for application. If you have a problem in using card slot, you can refer to next Card Slot Descriptions section. 10. Check your Windows System Device Manager to confirm proper installation of USB 2.0 card reader. The Generic USB 2.0 Card Reader will list in Universal Serial Bus Controller item.
Windows ME & Windows XP Installation 1. Close all of your exist executing file. 2. Insert driver disc into the CD-ROM drive. 3. Double click on Driver folder. 4. Double click on setup icon. 5. Click Next button to continue.
6. Check Complete item then click Next to continue. 7. Click Next button to continue.
8. Select an installation folder and click Next to continue. 9. Click Next button to continue.
10. The next window will let you know the driver has completed loading. Click Finish to finalize the driver installation. Then you need to restart your computer. 11. Reboot your computer and connect your card reader; The Window will detect and display four media identity icons in My Computer, now you can insert your memory card for application. If you have a problem in using card slot, you can refer to next Card Slot Description section.
12. Check your Windows System Device Manager to confirm proper installation of USB 2.0 card reader. The USB Mass Storage Device will list in Universal Serial Bus Controller item.
Mac OS Installation 1. Close all of your exist executing file. 2. Insert driver disc into the CD-ROM drive 3. Double click on HR-208N icon on desktop. 4. Double click on DRIVER folder. 5. Double click on MAC folder. 6. Copy MAC.SIT file to desktop. 7. Double click on MAC.SIT file then a new Mac folder will appear on desktop.
8. Open MAC folder then click on USB 2.0 list then to next. 9. Click on English folder then to next. 10. Double click on USB2.0 Card Reader3260 Installer
11. Choose Install item then click install button to continue. 12. Click Yes button to continue.
13. The next window will let you know the driver has completely installed. Click Restart to finalize the driver installation. 14. Reboot your computer and connect your card reader; The Mac will detect and display four untitled icons in desktop, now you can insert your memory card for application. If you have a problem with using memory card, refer to next Card Slot Description section.
Card Slot Descriptions The multi card reader provides four slots for over ten most popular memory cards. You must use each memory card in right slot and do not insert memory card in the reverse direction. Please refer to the following descriptions. All gold plate of memory card must be in downward when insert to the slot. 1. CF slot: supports C F memory card type I/II and IBM Microdrive 2. SM slot: supports Smart Media memory card 3. SD/MMC slot: supports S D mini SD card MMC MMCII memory cards 4. MS slot: supports Sony MS MS-Pro MS-DUO Indicator Descriptions The card reader provides five status indicators for card slot diagnosis. Please refer to the following descriptions and figure. Red Power LED: This LED lights when the reader has connected to the USB port. CF, SM, SD/MMC, MS Status LED: Normally all status indicators are OFF, when memory card has inserted, the using slot LED will turn ON, and it will recover OFF until the memory card is unplug. If data is transmitting between PC and card reader, the status LED will turn flash quickly.
Safely Remove Card Reader and Memory card It s recommended that to use the "Removable Device" icon on the taskbar, click to disable the storage device before unplugging the card reader. -------------------------------------------------------------------------------------------------------------------------- WARNING: Please do not remove any memory card or disconnect this card reader while data is transmitting and status LED is flashing, it may crash your computer and lost your valuable data. --------------------------------------------------------------------------------------------------------------------------
Uninstall Card Reader Driver Remove card reader driver from Windows 98 or Windows 2000 1. If you want to remove the product driver from Windows 98or Windows 2000 system, close all of your exist executing file and follow the path from Windows task bar Start menu\ programs\ Generic USB Card Reader Driver v2.1a \ Uninstall Generic USB Card Reader Driver v2.1a to remove it. 2. Confirm action window, Click Yes. 3. Click Yes to continue. 4. Click Close to finalize driver uninstalled and restart your computer.
Remove card reader driver from Windows ME or Windows XP 1. Close all of your exist executing file and follow the path from Windows task bar Start menu\ Start \ All programs\ Generic USB Card Reader Driver v2.1a \ Uninstall Generic USB Card Reader Driver v2.1a to remove it. 2. Confirm action window, Click Yes.
3. Click Yes to continue. 4. Click Close to finalize driver uninstalled and restart your computer. -- END -- P/N: M-311R208N