Solar EN Mounting systems
solar There is no segment that allows us to prove the sustainability of our innovative concepts better than this one. We invest all our energy into the ultimate developmental goal of harnessing the power of the sun. All our efforts are focussed on the development of new technologies in the field of renewable energy. To use the infinite power of the sun. ALUMERO is specialized in mounting systems for photovoltaic and solar installations on flat roofs, pitched roofs and for ground mounting. Individual clamping technologies for laminated and framed modules, as well as customized constructions are also part of our core competency. ALUMERO your system- and OEM-producer. 2
Table of Contents Table of Contents Pitched Roof as 2.1 Modern pitched roof system with all components made of aluminium, steel and stainless steel, shown in our product range. 4-35 The individual and flexible free field solution. All important facts and the wide product range. 36-49 aerocompact 2.0 The aerodynamic flat roof system with south and east/west alignment goes into the second round. All advantages plus product range. 50-71 Laminate clamps Summary over our high-quality clamps made of an extruded forgeable aluminium alloy. 72-87 Solar Thermal Energy Beside our consisting systems, we are proud to present our new mounting system Solar Thermal Energy. 88-95 Solar.pro.tool Plan your solar project save, simple and effective with our planning software Solar.Pro.Tool. 96-97 Short overview about our philosophy, quality, competence and all the divisions, in which we work successfully. 98-103 3
pitched roof AS 2.1 S O L A R M O U N T I N G S Y S T E M 10 YEARS Best Functionality QUALITY WARRANTY All product ranges from this catalog you can find online at www.alumero.com Pitched Roof As 2.1 The Innovative pitched roof mounting system ALUMERO s most economical pv mounting system for pitched roofs is quick and easy to install. The system AS 2.1 scores with structurally optimized profiles and pre-mounted components. The ALUMERO SOLAR.PRO.TOOL supports you in the technical layout of the pv mounting system. It generates the project report, a material list and a verifiable structural calculation for your pv system. MADE IN EUROPE Certificate No. MCS IK0201/1 + MCS IK0201/2 Pitched Roof Installation Kit 4
pitched roof AS 2.1 profiles artikel-nr: 17184 Mounting profile 45 drawing number: 802100-42 A product-nr: 802100-42 L=4.200 (-0/+10) mm Outside dimensions: 32 x 45mm 1 x Mounting channel for threaded plate M8 1 x Mounting channel for hammer head screw M8 or M10 EN AW 6063 / T66 0,816 kg/mtr 672 mtr. (160 Stg.) Wx, Wy: 3007 mm³, 1972 mm³ pitched roof AS 2.1 artikel-nr: 16757 Mounting profile 45 drawing number: 802100-62 A product-nr: 802100-62 L=6.200 (-0/+10) mm Outside dimensions: 32 x 45mm 1x Mounting channel for threaded plate M8 1x Mounting channel for hammer head screw M8 or M10 EN AW 6063 / T66 0,816 kg/mtr 992 mtr. (160 Stg.) Wx, Wy: 3007 mm³, 1972 mm³ artikel-nr: 16759 Mounting profile 65 drawing number: 802102-62 A product-nr: 802102-62 L=6.200 (-0/+10) mm Outside dimensions: 40 x 65 mm 1x Mounting channel for threaded plate M8 1x Mounting channel for hammer head screw M8 or M10 EN AW 6063 / T66 1,216 kg/mtr 465 mtr. (75 Stg.) Wx, Wy: 7795 mm³, 3922 mm³ Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 5
pitched roof AS 2.1 profiles artikel-nr: 16760 Mounting profile 95 drawing number: 802103-62 A product-nr: 802103-62 L=6.200 (-0/+10) mm Outside dimensions: 62 x 95 mm 1x Mounting channel for threaded plate M8 1x Mounting channel for hammer head screw M8 or M10 EN AW 6063 / T66 1,655 kg/mtr *223,2 mtr. (36 Stg.) Wx, Wy: 16700 mm³, 9830 mm³ artikel-nr: 17112 Mounting profile 80 drawing number: 802104-62 A product-nr: 802104-62 L=6.200 (-0/+10) mm Outside dimensions: 50 x 80 mm 1x Mounting channel for threaded plate M8 1x Mounting channel for hammer head screw M8 or M1 EN AW 6063 / T66 1,437 kg/mtr *341 mtr. (55 Stg.) Wx, Wy: 11797 mm³, 5943 mm³ artikel-nr: 19686 Mounting profile 37 drawing number: 802105-42 A product-nr: 802105-42 L=4.200 (-0/+10) mm Outside dimensions: 25,3 x 37 mm 1x Mounting channel for threaded plate M8 1x Mounting channel for hammer head screw M8 or M10 EN AW 6063 / T66 0,664 kg/mtr *756 mtr. (180 Stg.) Wx, Wy: 2023 mm³, 1544 mm³ 6
pitched roof AS 2.1 profiles artikel-nr: 17699 Mounting profile 37 drawing number: 802105-62 A product-nr: 802105-62 L=6.200 (-0/+10) mm Outside dimensions: 25,3 x 37 mm 1x Mounting channel for threaded plate M8 1x Mounting channel for hammer head screw M8 or M10 EN AW 6063 / T66 0,664 kg/mtr *1.116 mtr. (180 Stg.) Wx, Wy: 2023 mm³, 1544 mm³ pitched roof AS 2.1 artikel-nr: 20358 Mounting profile 37 cutting drawing number: 802105Z A product-nr: 802105Z L=variabel (-0/+10) mm Outside dimensions: 25,3 x 37 mm 1x Mounting channel for threaded plate M8 1x Mounting channel for hammer head screw M8 or M10 EN AW 6063 / T66 0,664 kg/mtr artikel-nr: 16761 Mounting profile 45 black drawing number: 802190-62 A product-nr: 802190-62 L=6.200 (-0/+10) mm Surface black anodized Outside dimensions: 32 x 45 mm 1x Mounting channel for threaded plate M8 1x Mounting channel for hammer head screw M8 or M10 anodized in E6/C35 EN AW 6063 / T66 0,816 kg/mtr 992 mtr. (160 Stg.) Wx, Wy: 3007 mm³, 1972 mm³ Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 7
pitched roof AS 2.1 connection parts artikel-nr: 16416 Profile connector 45 drawing number: 802150 A product-nr: 802150 L=270mm for Mounting profile 45 Outside dimensions: 22,3 x 22 mm EN AW 6063 / T66 0,075 kg/stk 10 Stk. pro Karton / 3.360 Stk. pro Palette artikel-nr: 20504 Profile connector 45 S drawing number: 802150S A product-nr: 802150S L=270mm for Mounting profile 45 incl. 4 self drilling screws SW8 6,0 x 25 mm Outside dimensions: 22,3 x 22 mm EN AW 6063 / T66 0,075 kg/stk 10 Stk. pro Karton / 3.360 Stk. pro Palette artikel-nr: 16441 Profile connector 65 drawing number: 802152 B product-nr: 802152 L=400mm for Mounting profile 65 Outside dimensions: 30 x 3 x 58,3 mm EN AW 6063 / T66 0,220 kg/stk 10 Stk. pro Karton / 1.000 Stk. pro Palette artikel-nr: 17418 Profile connector 65 S drawing number: 802152S B product-nr: 802152S L=400mm for Mounting profile 65 incl. 4 self drilling screws SW8 6,0 x 25 mm Outside dimensions: 30 x 3 x 8,3 mm EN AW 6063 / T66 0,248 kg/stk *10 Stk. pro Karton / 1.000 Stk. pro Palette 8
pitched roof AS 2.1 connection parts artikel-nr: 16446 Profile connector 95 drawing number: 802153 B product-nr: 802153 L=400mm for Mounting profile 95 Outside dimension: 51,1 x 91,3 mm EN AW 6063 / T66 0,453 kg/stk *10 Stk. pro Karton/240 Stk. pro Palette pitched roof AS 2.1 Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 artikel-nr: 17419 Profile connector 95 S drawing number: 802153S B product-nr: 802153S L=400mm for Mounting profile 95 incl 4 pcs. self drilling screws SW8 6,0 x 25 Outside dimension: 51,1 x 91,3 mm EN AW 6063 / T66 0,481 kg/stk *10 Stk. pro Karton / 240 Stk. pro Palette artikel-nr: 17115 Profile connector 80 drawing number: 802154 A product-nr: 802154 L=400mm for Mounting profile 80 Outside dimension: 39,1 x 76,3 mm EN AW 6063 / T66 0,345 kg/stk *10 Stk. pro Karton / 240 Stk. pro Palette artikel-nr: 18061 Profile connector 80 S drawing number: 802154S A product-nr: 802154S L=400mm for Mounting profile 80 incl. 4 self drilling screws SW10 6,3 x 25 mm Outside dimensions: 30 x 58,3 mm EN AW 6063 / T66 0,345 kg/stk *10 Stk. pro Karton / 240 Stk. pro Palette 9
pitched roof AS 2.1 connection parts artikel-nr: 18249 Profile connector 37 drawing number: 802155 A product-nr: 802155 L=200mm for Mounting profile 37 Outside dimensions: 15 x 22 mm EN AW 6063 / T66 0,051 kg/stk *10 Stk. pro Karton artikel-nr: 16417 Cross connector 2.1 drawing number: 802200 A product-nr: 802200 for Mounting profile 45 and 65 inkl. Socket screw M8x30 with square nut inkl. Socket screw M8x16 with threated plate 28x15 and Tuflock EN AW 6063 / T66 0,092 kg/stk 20 Stk. pro Karton / 2.800 Stk. pro Palette clamps artikel-nr: 19161 Earthing plate for Middle clamp drawing number: 800301P B product-nr: 800301P stainless steel 1.4301 to implement the Modules in the grounding For Middle clamps with L= 50 mm and W= 20 mm Edelstahl 1.4301 0,300 kg/100 Stk. 100 Stk. pro PE Beutel; 4.200 Stk. pro Karton artikel-nr: 16482 Middle clamp for fast mounting 30-33 drawing number: 802301-31V A product-nr: 802301-31V L=50mm Incl. Opening-function for Frame height 31-33 mm for Mounting profiles with threaded plate channel M8 ; stainless steel A2-70 EN AW 6063 / T66; A2-70 0,046 kg/stk 50 Stk. pro Karton / 4.950 Stk. pro Palette 10
pitched roof AS 2.1 clamps artikel-nr: 15782 Middle clamp for fast mounting 34-38 drawing number: 802301-34V A product-nr: 802301-34V L=50mm incl. Opening-function for Frame height 31-33 mm for Mounting profile with threaded plate channel M8 ; stainless steel A2-70 EN AW 6063 / T66; A2-70 0,048 kg/stk 50 Stk. pro Karton / 4.950 Stk. pro Palette pitched roof AS 2.1 artikel-nr: 15783 Middle clamp for fast mounting 40-43 drawing number: 802301-40V A product-nr: 802301-40V L=50mm incl. Opening-function for Frame height 40-43 mm for Mounting profile with threaded plate channel M8 ; stainless steel A2-70 EN AW 6063 / T66; A2-70 0,050 kg/stk 50 Stk. pro Karton / 4.950 Stk. pro Palette artikel-nr: 15784 Middle clamp for fast mounting 45-46 drawing number: 802301-45V A product-nr: 802301-45V L=50mm Incl. Opening-function for Frame height 45-46 mm for Mounting profiles with threaded plate channel M8 ; stainless steel A2-70 EN AW 6063 / T66; A2-70 0,052 kg/stk *50 Stk. pro Karton / 4.950 Stk. pro Palette artikel-nr: 15785 Middle clamp for fast mounting 47-50 drawing number: 802301-50V A product-nr: 802301-50V L=50mm Incl. Opening-function for Frame height 47-50 mm for Mounting profiles with threaded plate channel M8 ; stainless steel A2-70 EN AW 6063 / T66; A2-70 0,054 kg/stk *50 Stk. pro Karton / 4.950 Stk. pro Palette Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 11
pitched roof AS 2.1 clamps artikel-nr: 17046 Middle clamp Click 2.1 drawing number: 802301C A product-nr: 802301C L=50mm inkl. Opening-function for Frame height 35-50 mm for mounting profile with threaded plate channel M8 ;stainless steel A2-70 EN AW 6063 / T66; A2-70 0,058 kg/stk 50 Stk. pro Karton / 4.950 Stk. pro Palette artikel-nr: 17753 End clamp for fast mounting 30 drawing number: 802304-30V A product-nr: 802304-30V L=50mm Incl. Opening-function for Frame height 30 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,046 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 16481 End clamp for fast mounting 31 drawing number: 802304-31V B product-nr: 802304-31V L=50mm Incl. Opening-function for Frame height 31 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,046 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 18079 End clamp for fast mounting 33 drawing number: 802304-33V A product-nr: 802304-33V L=50mm Incl. Opening-function for Frame height 33 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,048 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette 12
pitched roof AS 2.1 clamps artikel-nr: 15786 End clamp for fast mounting 34 drawing number: 802304-34V B product-nr: 802304-34V L=50mm Incl. Opening-function for Frame height 34 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,048 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette pitched roof AS 2.1 artikel-nr: 15787 End clamp for fast mounting 35 drawing number: 802304-35V B product-nr: 802304-35V L=50mm Incl. Opening-function for Frame height 35 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,048 kg/stk 20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 15789 End clamp for fast mounting 36 drawing number: 802304-36V B product-nr: 802304-36V L=50mm Incl. Opening-function for Frame height 36 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,049 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 15790 End clamp for fast mounting 38 drawing number: 802304-38V B product-nr: 802304-38V L=50mm Incl. Opening-function for Frame height 38 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,050 kg/stk 20 Stk. pro Karton / 7.000 Stk. pro Palette Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 13
pitched roof AS 2.1 clamps artikel-nr: 15791 End clamp for fast mounting 40 drawing number: 802304-40V B product-nr: 802304-40V L=50mm Incl. Opening-function for Frame height 40 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,051 kg/stk 20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 15792 End clamp for fast mounting 42 drawing number: 802304-42V B product-nr: 802304-42V L=50mm Incl. Opening-function for Frame height 42 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,051 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 15793 End clamp for fast mounting 43 drawing number: 802304-43V B product-nr: 802304-43V L=50mm Incl. Opening-function for Frame height 43 mm for Mounting profiles with threaded plate canel M8 EN AW 6063 / T66; A2-70 0,052 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 15795 End clamp for fast mounting 45 drawing number: 802304-45V B product-nr: 802304-45V L=50mm Incl. Opening-function for Frame height 45 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,052 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette 14
pitched roof AS 2.1 clamps artikel-nr: 15794 End clamp for fast mounting 46 drawing number: 802304-46V B product-nr: 802304-46V L=50mm Incl. Opening-function for Frame height 46 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,053 kg/stk 20 Stk. pro Karton / 7.000 Stk. pro Palette pitched roof AS 2.1 artikel-nr: 15797 End clamp for fast mounting 50 drawing number: 802304-50V B product-nr: 802304-50V L=50mm Incl. Opening-function for Frame height 50 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,054 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 20953 End Clamp Universal drawing number: 802304C product-nr: 802304C L=80mm incl. grounding-pins and O-ring suitable for framed PV-modules with a frame height from 33 up to 50mm EN AW 6063 / T66; A2-70 0,081 kg/stk 20 Stk./Karton, 10.500 Stk./Palette artikel-nr: 18049 Middle clamp Click 2.1 black drawing number: 802391C A product-nr: 802391C L=50mm surface black anodized Incl. Opening-function and click-element for Frame height 35-50 mm for Mounting profiles with threaded plate channel M8 anodized E6/C35, stainless steel A2-70 EN AW 6063 / T66; A2-70 0,058 kg/stk 50 Stk. pro Karton/ 4.950 Stk. pro Palette Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 15
pitched roof AS 2.1 clamps artikel-nr: 21131 End Clamp Universal black drawing number: 802394C product-nr: 802394C L=80mm surface black anodized incl. grounding-pins and O-ring suitable for framed PV-modules with a frame height from 33 up to 50mm anodized in E6/C35 EN AW 6063 / T66; A2-70 0,081 kg/stk 20 Stk./Karton, 10.500 Stk./Palette roof hooks artikel-nr: 15560 Roof hook Schiefer drawing number: 800423 A product-nr: 800423 Stem: 30x5 for pitched roof with slate roofing or asphalt shingles The roof hook is to integrate on site according to the roofing in the Directive covering (without sealing material) stainless steel 1.4301 0,391 kg/stk 1.000 Stk. pro Palette artikel-nr: 15441 Roof hook Bieberschwanz drawing number: 800425 A product-nr: 800425 Stem: 30x5 stainless steel 1.4301 To be used with metal tile (800666) 0,520 kg/stk 1.000 Stk. pro Palette artikel-nr: 18060 Roof hook Coppi drawing number: 800430 A product-nr: 800430 Platte: 167x60x5; Stiel: 35x8 Stainless steel 1.4016 mutually suitable plate for mounting on rafters and purlins 1,500 kg/stk * 500 Stk. je Gitterbox 16
pitched roof AS 2.1 roof hooks artikel-nr: 16708 Metal plain tile drawing number: 800666 product-nr: 800666 Zn-Mg coated high-strength steel sheet to be mounted with Beavertail roof hook (800425) 0,500 kg/stk 65 Stk. pitched roof AS 2.1 artikel-nr: 17358 Roof hook 40x10 for fast mounting drawing number: 802406 B product-nr: 802406 Plate: 157x80x5; Stem: 40x10 Stainless Steel 1.4316; EN AW 6063 / T66 1,647 kg/stk 10 Stk. pro Karton; 240 Stk. pro Palette artikel-nr: 17558 Roof hook AL13 drawing number: 802413 A product-nr: 802413 Plate: 115x100 mm for Mounting profile 45 3x adjustable EN AW 6005 / T6; A2-70 0,714 kg/stk 20 Stk. pro Karton / 320 Stk. pro Palette artikel-nr: 18265 Roof hook ALS13 drawing number: 802416 A product-nr: 802416 Plate: 115x100 mm for higher snow loads and for Mounting profile 45 3x adjustable EN AW 7020 / T6; A2-70 0,714 kg/stk 20 Stk. pro Karton / 320 Stk. pro Palette Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 17
pitched roof AS 2.1 roof hooks artikel-nr: 20836 Roof hook AL UK SLIM drawing number: 802418 product-nr: 802418 Platte: 115x100mm EN AW 6005/ 6063 artikel-nr: 17082 Distance plate 2 mm drawing number: 802605 A product-nr: 802605 100x75x2 mm To put under Roof Hooks Take care on changing of screw lengths 1.4016 0,071 kg/stk *2.000 Stk. pro Box / 4.000 Stk. pro Palette artikel-nr: 17083 Distance plate 3 mm drawing number: 802606 A product-nr: 802606 100x75x3 mm To put under Roof hooks Take care on changing of screw lengths 1.4016 0,107 kg/stk *2.000 Stk. pro Box / 4.000 Stk. pro Palette artikel-nr: 19224 Distance plate 3 mm drawing number: 802607 A product-nr: 802607 60x35x3 mm 1.4016 To put under Roof Hooks with swiveable Ground Plate 100 Stk. pro Karton 18
pitched roof AS 2.1 roof hooks artikel-nr: 19227 Distance plate 5 mm drawing number: 802608 A product-nr: 802608 60x35x5 mm 1.4016 To put under Roof Hooks with swiveable Ground Plate 100 Stk. pro Karton pitched roof AS 2.1 corrogated roof fastener artikel-nr: 16906 Mountingplate 2.1 M10 drawing number: 800462-10 A product-nr: 800462-10 EN AW 6063 / T66 0,116 kg/stk 20 Stk. pro Karton / 1.540 Stk. pro Palette artikel-nr: 16357 Mountingplate 2.1 M12 drawing number: 800462-12 A product-nr: 800462-12 EN AW 6063 / T66 0,116 kg/stk 20 Stk. pro Karton / 1.540 Stk. pro Palette artikel-nr: 18058 Solar fastener drawing number: 800464 A product-nr: 800464 BZ-8,0x80/70 FZD for steel substructures with captive sealing washer for corrugated fiber cement slabs without mounting plate stainless steel V2A, EPDM 9,700 kg/100 Stk. *50 Stk. / Karton Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 19
pitched roof AS 2.1 corrogated roof fastener artikel-nr: 18059 Solar fastener drawing number: 800465 A product-nr: 800465 BZ-8,0x100/70 FZD for steel substructures with captive sealing washer for corrugated fiber cement slabs without mounting plate stainless steel V2A, EPDM 10,400 kg/100 Stk. *50 Stk. / Karton artikel-nr: 16424 Hanger bolt M10x200 for fast mounting drawing number: 802403 A product-nr: 802403 M10x200 pre-assembled with 3 locking nuts and seal with mounting plate for fast mounting A2-70; EN AW 6063 / T66; EPDM Note: Minimum thread 60 mm! 22,800 kg/100 Stk. 20 Stk. pro Karton; 1.000 Stk. pro Palette artikel-nr: 16425 Hanger bolt M12x300 for fast mounting drawing number: 802404 A product-nr: 802404 M12x300 pre-assembled with 3 locking nuts and seal with mounting plate for fast mounting A2-70; EN AW 6063 / T66; EPDM Note: Minimum thread 80 mm! 35,400 kg/100 Stk. 20 Stk. pro Karton; 1.000 Stk. pro Palette artikel-nr: 16599 Hanger bolt M12x200 for fast mounting drawing number: 802405 A product-nr: 802405 M12x200 pre-assembled with 3 locking nuts and seal with mounting plate for fast mounting A2-70; EN AW 6063 / T66; EPDM Note: Minimum thread 80 mm! 28,300 kg/100 Stk. 20 Stk. pro Karton; 1.000 Stk. pro Palette 20
pitched roof AS 2.1 corrogated roof fastener artikel-nr: 18008 Hanger bolt M10x250 for fast mounting drawing number: 802408 A product-nr: 802408 M10x250 pre-assembled with 3 locking nuts and seal with mounting plate for fast mounting A2-70; EN AW 6063 / T66; EPDM pitched roof AS 2.1 Note: Minimum thread 60 mm! 26,800 kg/100 Stk. *20 Stk. pro Karton; 1.000 Stk. pro Palette Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 artikel-nr: 18009 Hanger bolt M10x300 for fast mounting drawing number: 802409 A product-nr: 802409 M10x300 pre-assembled with 3 locking nuts and seal with mounting plate for fast mounting A2-70; EN AW 6063 / T66; EPDM Note: Minimum thread 60 mm! 30,800 kg/100 Stk. *20 Stk. pro Karton; 1.000 Stk. pro Palette artikel-nr: 18010 Hanger bolt M12x250 for fast mounting drawing number: 802410 A product-nr: 802410 M12x250 pre-assembled with 3 locking nuts and seal with mounting plate for fast mounting A2-70; EN AW 6063 / T66; EPDM Note: Minimum thread 80 mm! 35,000 kg/100 Stk. *20 Stk. pro Karton; 1.000 Stk. pro Palette artikel-nr: 17478 Hanger bolt / Solar fastener drawing number: 802499 product-nr: 802499 Further dimensions, models and caps on request A2-70; EN AW 6063 / T66; EPDM kg/100 Stk. 21
pitched roof AS 2.1 metal sheet fastener artikel-nr: 19163 Kalzip clamp drawing number: 800435 B product-nr: 800435 stainless steel 1.4016 0,152 kg/stk *50 Stk. im Karton artikel-nr: 19164 Standing metal seam clamp drawing number: 800436 B product-nr: 800436 Sheet metal folding clamp stainless steel 1.4016 0,347 kg/stk 50 Stk. pro Karton artikel-nr: 17563 Clamp for Zambelli 465 / Domico GBS drawing number: 800466 product-nr: 800466 Typ 1 Stainless steel 1.4301 0,348 kg/stk *50 Stk. im Karton artikel-nr: 18062 Clamp Zambelli 500 drawing number: 800467 product-nr: 800467 Typ 2 Stainless steel 1.4301 0,188 kg/stk *50 Stk. im Karton 22
pitched roof AS 2.1 metal sheet fastener artikel-nr: 18099 Hanger bolt set incl. twin mounting plate drawing number: 800468 product-nr: 800468 2 x M12x300 pre-assembled with 3 locking nuts and seal with mounting plate for fiber cement - shaft distance 177 mm Note: Minimum thread 80 mm! A2-70; EN AW 6063 / T66; EPDM 0,800 kg/stk *10 Stk. pro Karton / 640 Stk. pro Palette pitched roof AS 2.1 Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 artikel-nr: 17101 Trapezoidal bridge 2.1 drawing number: 802440 B product-nr: 802440 L=400mm Incl. EPDM rubber and incl. 4 pcs. self drillings screws with sealing washer For sick distances from 100-333 mm EN AW 6063 / T66; EPDM 0,269 kg/stk 25 Stk. pro Karton / 800 Stk. pro Palette artikel-nr: 17102 Trapezoidal sheet bridge Plus drawing number: 802445 A product-nr: 802445 L=400mm Incl. EPDM rubber and incl. 4 pcs. self drillings screws with sealing washer For sick distances from 100-333 mm EN AW 6063 / T66; EPDM 0,359 kg/stk 25 Stk. pro Karton / 800 Stk. pro Palette artikel-nr: 17103 Front part Plus drawing number: 802446 A product-nr: 802446 L=100mm EN AW 6063 / T66; EPDM for mounting in combination with 800445 0,082 kg/stk 10 Stk. pro Karton / 990 Stk. pro Palette 23
pitched roof AS 2.1 metal sheet fastener artikel-nr: 17104 Back part Plus drawing number: 802447 A product-nr: 802447 L=100mm EN AW 6063 / T66; EPDM for mounting in combination with 800445 0,152 kg/stk 10 Stk. pro Karton / 480 Stk. pro Palette artikel-nr: 17105 Securing Set Plus drawing number: 802448 A product-nr: 802448 for trapezoidal elevation system Plus Consisting of a threaded plate, hex bolt and washer A2-70 0,025 kg/stk artikel-nr: 17919 Trapezoidal bridge Plus S drawing number: 802449 A product-nr: 802449 L=400 mm Incl. EPDM rubber For sick distances from 100-333 mm 4 pcs. Screws need to be ordered separately depending on the thickness of the sandwich element. EN AW 6063 / T66; EPDM 0,359 kg/stk *25 Stk. pro Karton / 800 Stk. pro Palette standard parts/accessories artikel-nr: 15726 Socket screw drawing number: 800610 DIN912 product-nr: 800610 M8x20 With hexagon socket and serration under head SW6 A2-70 1,310 kg/100 Stk. 200 Stk. 24
pitched roof AS 2.1 standard parts/accessories artikel-nr: 15729 Socket screw drawing number: 800613 DIN 912 product-nr: 800613 M8x35 With hexagon socket and serration under head SW6 A2-70 1,800 kg/100 Stk. 200 Stk. pitched roof AS 2.1 Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 artikel-nr: 16908 Hexagon screw drawing number: 800627 DIN 933 product-nr: 800627 M10x45 Threaded up to the head SW17 A2-70 100 Stk. artikel-nr: 15052 Hexagon nut drawing number: 800634 DIN 6923 product-nr: 800634 M10 A2-70 with flange and serration 1,120 kg/100 Stk. 100 Stk. artikel-nr: 14927 Threaded plate type 28x15 drawing number: 800637 product-nr: 800637 M8 with Precote 10-1 coating Stainless steel V2A 0,700 kg/100 Stk. 200 Stk. 25
pitched roof AS 2.1 standard parts/accessories artikel-nr: 15453 Hammerhead screw drawing number: 800646 product-nr: 800646 M10x25 A2-70 1,990 kg/100 Stk. 100 Stk. artikel-nr: 17086 Self-drilling screw drawing number: 800649 product-nr: 800649 6,0x25 B2-2-6,0x25 Bi-Metal, incl. sealing washer: D=16; self-tapping for steel sheet, SW8 A2-70 with hardened drill bit, SW8 0,870 kg/100 Stk. 100 Stk. artikel-nr: 20838 Self-drilling screw/ thin-metal-sheet screw drawing number: 800649-1 product-nr: 800649-1 5,5x25 JF3-2-5, 5x25 E16 incl. seal disc A2-70 with hardened drill bit, SW8 0,870 kg/100 Stk. 100 Stk. artikel-nr: 16531 Flat head screw drawing number: 800664 product-nr: 800664 8,0x120 glide coating TX40 A2-70 50 Stk. 26
pitched roof AS 2.1 standard parts/accessories artikel-nr: 16598 Flat head screw drawing number: 800665 product-nr: 800665 8,0x100 glide coating TX40 A2-70 50 Stk. pitched roof AS 2.1 Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 artikel-nr: 16895 Flat head screw drawing number: 800667 product-nr: 800667 8,0x140 glide coating TX40 A2-70 *50 Stk. artikel-nr: 16896 Flat head screw drawing number: 800668 product-nr: 800668 8,0x160 glide coating TX40 A2-70 *50 Stk. artikel-nr: 16897 Flat head screw drawing number: 800669 product-nr: 800669 8,0x200 glide coating TX40 A2-70 *50 Stk. 27
pitched roof AS 2.1 standard parts/accessories artikel-nr: 16900 Flat head screw drawing number: 800670 product-nr: 800670 8,0x180 glide coating TX40 A2-70 *50 Stk. artikel-nr: 15820 Cable tie inkl. clip drawing number: 800706 product-nr: 800706 200x4,8 mm To clip on trapezoidal bridge Cable ties 200 x 4.6 mm PA 66, UV resistant 0,300 kg/100 Stk. 100 Stk. pro Beutel / 4.000 Stk. pro Karton artikel-nr: 16596 Shutter for Mounting profile 45 drawing number: 802601 MT0030246#1 product-nr: 802601 For Mounting profile 45 (802100) PVC black 0,007 kg/stk 2.500 Stk. pro Karton artikel-nr: 16709 Round wire drawing number: 802602 A product-nr: 802602 8 mm EN AW 6101 semi-hard For Grounding 0,136 kg/mtr *In Coils a 20 kg (ca. 145 mtr) 28
pitched roof AS 2.1 standard parts/accessories artikel-nr: 16710 Wire clamp 8-10 drawing number: 802603 A product-nr: 802603 To fix round wire with 8-10 mm on Mounting profiles with Mounting channel for hammer head screws M8 VA; A2-70 0,072 kg/stk 30 Stk. pro Karton / 8.820 Stk. pro Palette pitched roof AS 2.1 artikel-nr: 16766 Cable tie inkl. clip drawing number: 802604 A product-nr: 802604 200x4,8 mm Clips for Mounting channel M8 and M10 cable tie 200 x 4,8 PA 66 UV resistant 0,200 kg/100 Stk. 100 Stk. pro Beutel / 2.500 Stk. ro Karton artikel-nr: 18005 Self-drilling Screw drawing number: 802651 product-nr: 802651 6,5x100 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich elements from 20 to 40 mm on wooden substructures A2-70 with hardened drill point 1,977 kg/100 Stk. *200 Stk. artikel-nr: 18084 Self-drilling Screw drawing number: 802652 product-nr: 802652 6,5x120 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich elements from 40 to 60 mm on wooden substructures A2-70 with hardened drill point 2,317 kg/100 Stk. *150 Stk. Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 29
pitched roof AS 2.1 standard parts/accessories artikel-nr: 18085 Self-drilling Screw drawing number: 802653 product-nr: 802653 6,5x140 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich elements from 60 to 80 mm on wooden substructures A2-70 with hardened drill point 2,670 kg/100 Stk. *150 Stk. artikel-nr: 18086 Self-drilling Screw drawing number: 802654 product-nr: 802654 6,5x160 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich elements from 80 to 100 mm on wooden substructures A2-70 with hardened drill point 3,029 kg/100 Stk. *150 Stk. artikel-nr: 18087 Self-drilling Screw drawing number: 802655 product-nr: 802655 6,5x180 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich elements from 100 to 120 mm on wooden substructures A2-70 with hardened drill point 3,347 kg/100 Stk. *100 Stk. artikel-nr: 18088 Self-drilling Screw drawing number: 802656 product-nr: 802656 6,5x200 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich elements from 120 to 140 mm on wooden substructures A2-70 with hardened drill point 3,703 kg/100 Stk. *100 Stk. 30
pitched roof AS 2.1 standard parts/accessories artikel-nr: 18089 Self-drilling Screw drawing number: 802657 product-nr: 802657 6,5x220 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich elements from 140 to 160 mm on wooden substructures A2-70 with hardened drill point 4,034 kg/100 Stk. *100 Stk. pitched roof AS 2.1 Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 artikel-nr: 18090 Self-drilling Screw drawing number: 802658 product-nr: 802658 6,5x240 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich elements from 160 to 180 mm on wooden substructures A2-70 with hardened drill point 4,376 kg/100 Stk. *100 Stk. artikel-nr: 18006 Self-drilling Screw drawing number: 802661 product-nr: 802661 6,3x67 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich panels 20-40 mm on steel substructure of 1.5-5 mm Screw speed: 1300 U / min. A2-70 with hardened drill point 1,222 kg/100 Stk. *250 Stk. artikel-nr: 18091 Self-drilling Screw drawing number: 802662 product-nr: 802662 6,3x87 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich panels 48-60 mm on steel substructure of 1.5-5 mm Screw speed: 1300 U / min. A2-70 with hardened drill point 1,456 kg/100 Stk. *200 Stk. 31
pitched roof AS 2.1 standard parts/accessories artikel-nr: 18092 Self-drilling Screw drawing number: 802663 product-nr: 802663 6,3x107 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich panels 58-80 mm on steel substructure of 1.5-5 mm Screw speed: 1300 U / min. A2-70 with hardened drill point 1,721 kg/100 Stk. *200 Stk. artikel-nr: 18093 Self-drilling Screw drawing number: 802664 product-nr: 802664 6,3x127 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich panels 72-100 mm on steel substructure of 1.5-5 mm Screw speed: 1300 U / min. A2-70 with hardened drill point 1,961 kg/100 Stk. *150 Stk. artikel-nr: 18094 Self-drilling Screw drawing number: 802664 product-nr: 802664 6,3x147 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich panels 92-120 mm on steel substructure of 1.5-5 mm Screw speed: 1300 U / min. A2-70 with hardened drill point 2,228 kg/100 Stk. *150 Stk. artikel-nr: 18095 Self-drilling Screw drawing number: 802665 product-nr: 802665 6,3x167 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich panels 112-140 mm on steel substructure of 1.5-5 mm Screw speed: 1300 U / min. A2-70 with hardened drill point 2,456 kg/100 Stk. *150 Stk. 32
pitched roof AS 2.1 standard parts/accessories artikel-nr: 18096 Self-drilling Screw drawing number: 802666 product-nr: 802666 6,3x197 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich panels 140-170 mm on steel substructure of 1.5-5 mm Screw speed: 1300 U / min. A2-70 with hardened drill point 2,880 kg/100 Stk. *100 Stk. pitched roof AS 2.1 artikel-nr: 18113 Self-drilling Screw drawing number: 802667 product-nr: 802667 6,3x237 Bi-metal, incl. sealing washer: D = 16; self-drilling; SW8 for sandwich panels 170-210 mm on steel substructure of 1.5-5 mm Screw speed: 1300 U / min. A2-70 with hardened drill point 3,385 kg/100 Stk. *100 Stk. Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 installation instructions artikel-nr: 20224 Mounting instruction Roof hooks AS 2.1 drawing number: 802701 product-nr: 802701 German: Version 11/15 artikel-nr: 20225 Mounting instruction Hanger bolts AS 2.1 drawing number: 802702 product-nr: 802702 German; Version 11/15 33
pitched roof AS 2.1 installation instructions artikel-nr: 20226 Mounting instruction Trapezoidal bridge AS 2.1 drawing number: 802703 product-nr: 802703 German; Version 11/15 artikel-nr: 20227 Mounting instruction Sheet metal folding AS 2.1 drawing number: 802704 product-nr: 802704 German; Version 11/15 artikel-nr: 20862 Sample case AS2.1 drawing number: product-nr: Exclusive sample-case for presentation or training purposes Contains all articles of the AS2.1 mounting system 34
pitched roof AS 2.1 Notes pitched roof AS 2.1 Solar.pro.tool Solar thermal energy Laminate Clamps Aerocompact 2.0 35
S O L A R M O U N T I N G S Y S T E M 10 YEARS Best Functionality QUALITY WARRANTY ca. 3300 2600 Ground Mounting System YOUR BIG ADVANTAGE With a clever mix of high-quality steel components and innovative aluminum components our ALUMERO ground mounting system can optimal respond to your requirements. Ease installation is also of paramount importance for ground mounting system as in the entire portfolio of. With the pre-assembled components for quick mounting you can achieve maximum installation speed. Due to sophisticated standard components different table configurations can be realized immediately from stock. In addition, the simple adjustability makes it easy to adapt the table configuration at site to the different terrain. Thereby your ca. 1800 solar park fits in every case, even in difficult terrain. 20 + + optimized adaptation to the relief by integrated adjustment + + effective utilization of material + + quick and easy installation + + small quantity of individual components + + project-related planning and structural calculation + + no sealing of the soil + + long life time by high quality components + + corrosion-resistant + + easy maintenance of terrain and pasturing possible + + complete recyclable + + high residual value ca. 1750 MADE IN EUROPE 36
bis 25.000 ca. 3300 2600 Pitched Roof AS 2.1 Clamps as pre-assembled components ca. 2400 ca. 700 20 ca. 1800 ca. 1750 Example Example Aluminium mounting profiles, varying to the wind- and snowloads Profile connector with slipping protection Technical specifications Table design: Table inclination: 19-35 Table length: Depth of penetration: Height of bottom edge of table: Distance of piles and rafters: Cross section profiles: 2 module in portrait in top of each other up to 25 m Standard 1750mm or rather to custom specification variable will be calculated project-related and is depending on the local wind and snow load assumptions will be calculated project-related and is depending on the local wind and snow load assumptions Solar.pro.tool Solar Thermal Energy Laminate Clamps Aerocompact 2.0 Material of piles and rafters: galvanized steel Material of mounting profiles and clamps: aluminium EN AW 6063 T66 Material of fastening elements: Stainless steel A2-70 Accessory: earthing clamp for potential equalization, components for cable fixation, components for internal potential equalization, ground wire, clamps for all types of modules 37
profiles artikel-nr: 16759 Mounting profile 65 drawing number: 802102-62 A product-nr: 802102-62 L=6.200 (-0/+10) mm Outside dimensions: 40 x 65 mm 1x Mounting channel for threaded plate M8 1x Mounting channel for hammer head screw M8 or M10 EN AW 6063 / T66 1,216 kg/mtr 465 mtr. (75 Stg.) Wx, Wy: 7795 mm³, 3922 mm³ artikel-nr: 16440 Mounting profile 65 cut drawing number: 802102Z A product-nr: 802102Z L=variabel (-0/+10) mm Outside dimensions: 40x65mm 1 x Mounting channel for threaded plate M8 1 x Mounting channel for hammer head screw M8 or M10 EN AW 6063 / T66 1,216 kg/mtr Wx, Wy: 7795 mm³, 3922 mm³ artikel-nr: 16760 Mounting profile 95 drawing number: 802103-62 A product-nr: 802103-62 L=6.200 (-0/+10) mm Outside dimensions: 62 x 95 mm 1x Mounting channel for threaded plate M8 1x Mounting channel for hammer head screw M8 or M10 EN AW 6063 / T66 1,655 kg/mtr *223,2 mtr. (36 Stg.) Wx, Wy: 16700 mm³, 9830 mm³ 38
profiles artikel-nr: 16445 Mounting profile 95 cut drawing number: 802103Z A product-nr: 802103Z L=variabel mm (-0/+10mm) Outside dimensions: 62 x 95 mm 1xMounting Channel for threaded plate M8 1xMounting Channel for hammer head screw M8 or M10 EN AW 6063 / T66 1,655 kg/mtr Wx, Wy: 16700 mm³, 9830 mm³ Pitched Roof AS 2.1 artikel-nr: 17112 Mounting profile 80 drawing number: 802104-62 A product-nr: 802104-62 L=6.200 (-0/+10) mm Outside dimensions: 50 x 80 mm 1x Mounting channel for threaded plate M8 1x Mounting channel for hammer head screw M8 or M1 EN AW 6063 / T66 1,437 kg/mtr *341 mtr. (55 Stg.) Wx, Wy: 11797 mm³, 5943 mm³ artikel-nr: 17114 Mounting profile 80 drawing number: 802104Z A product-nr: 802104Z L=variabel (-0/+10) mm Outside dimensions: 50 x 80 mm 1x Mounting channel for threaded plate M8 1x Mounting channel for hammer head screw M8 or M10 EN AW 6063 / T66 1,437 kg/mtr Wx, Wy: 11797 mm³, 5943 mm³ Solar.pro.tool Solar Thermal Energy Laminate Clamps Aerocompact 2.0 39
connection parts artikel-nr: 16441 Profile connector 65 drawing number: 802152 B product-nr: 802152 L=400mm for Mounting profile 65 Outside dimensions: 30 x 3 x 58,3 mm EN AW 6063 / T66 0,220 kg/stk 10 Stk. pro Karton / 1.000 Stk. pro Palette artikel-nr: 17418 Profile connector 65 S drawing number: 802152S B product-nr: 802152S L=400mm for Mounting profile 65 incl. 4 self drilling screws SW8 6,0 x 25 mm Outside dimensions: 30 x 3 x 8,3 mm EN AW 6063 / T66 0,248 kg/stk *10 Stk. pro Karton / 1.000 Stk. pro Palette artikel-nr: 16446 Profile connector 95 drawing number: 802153 B product-nr: 802153 L=400mm for Mounting profile 95 Outside dimension: 51,1 x 91,3 mm EN AW 6063 / T66 0,453 kg/stk *10 Stk. pro Karton/240 Stk. pro Palette artikel-nr: 17419 Profile connector 95 S drawing number: 802153S B product-nr: 802153S L=400mm for Mounting profile 95 incl 4 pcs. self drilling screws SW8 6,0 x 25 Outside dimension: 51,1 x 91,3 mm EN AW 6063 / T66 0,481 kg/stk *10 Stk. pro Karton / 240 Stk. pro Palette 40
connection parts artikel-nr: 17115 Profile connector 80 drawing number: 802154 A product-nr: 802154 L=400mm for Mounting profile 80 Outside dimension: 39,1 x 76,3 mm EN AW 6063 / T66 0,345 kg/stk *10 Stk. pro Karton / 240 Stk. pro Palette Pitched Roof AS 2.1 Solar.pro.tool Solar Thermal Energy Laminate Clamps Aerocompact 2.0 artikel-nr: 18061 Profile connector 80 S drawing number: 802154S A product-nr: 802154S L=400mm for Mounting profile 80 incl. 4 self drilling screws SW10 6,3 x 25 mm Outside dimensions: 30 x 58,3 mm EN AW 6063 / T66 0,345 kg/stk *10 Stk. pro Karton / 240 Stk. pro Palette clamps artikel-nr: 19161 Earthing plate for Middle clamp drawing number: 800301P B product-nr: 800301P stainless steel 1.4301 to implement the Modules in the grounding For Middle clamps with L= 50 mm and W= 20 mm Edelstahl 1.4301 0,300 kg/100 Stk. 100 Stk. pro PE Beutel; 4.200 Stk. pro Karton artikel-nr: 16482 Middle clamp for fast mounting 30-33 drawing number: 802301-31V A product-nr: 802301-31V L=50mm Incl. Opening-function for Frame height 31-33 mm for Mounting profiles with threaded plate channel M8 ; stainless steel A2-70 EN AW 6063 / T66; A2-70 0,046 kg/stk 50 Stk. pro Karton / 4.950 Stk. pro Palette 41
clamps artikel-nr: 15782 Middle clamp for fast mounting 34-38 drawing number: 802301-34V A product-nr: 802301-34V L=50mm incl. Opening-function for Frame height 31-33 mm for Mounting profile with threaded plate channel M8 ; stainless steel A2-70 EN AW 6063 / T66; A2-70 0,048 kg/stk 50 Stk. pro Karton / 4.950 Stk. pro Palette artikel-nr: 15783 Middle clamp for fast mounting 40-43 drawing number: 802301-40V A product-nr: 802301-40V L=50mm incl. Opening-function for Frame height 40-43 mm for Mounting profile with threaded plate channel M8 ; stainless steel A2-70 EN AW 6063 / T66; A2-70 0,050 kg/stk 50 Stk. pro Karton / 4.950 Stk. pro Palette artikel-nr: 15784 Middle clamp for fast mounting 45-46 drawing number: 802301-45V A product-nr: 802301-45V L=50mm Incl. Opening-function for Frame height 45-46 mm for Mounting profiles with threaded plate channel M8 ; stainless steel A2-70 EN AW 6063 / T66; A2-70 0,052 kg/stk *50 Stk. pro Karton / 4.950 Stk. pro Palette artikel-nr: 15785 Middle clamp for fast mounting 47-50 drawing number: 802301-50V A product-nr: 802301-50V L=50mm Incl. Opening-function for Frame height 47-50 mm for Mounting profiles with threaded plate channel M8 ; stainless steel A2-70 EN AW 6063 / T66; A2-70 0,054 kg/stk *50 Stk. pro Karton / 4.950 Stk. pro Palette 42
clamps artikel-nr: 17046 Middle clamp Click 2.1 drawing number: 802301C A product-nr: 802301C L=50mm inkl. Opening-function for Frame height 35-50 mm for mounting profile with threaded plate channel M8 ;stainless steel A2-70 EN AW 6063 / T66; A2-70 0,058 kg/stk 50 Stk. pro Karton / 4.950 Stk. pro Palette Pitched Roof AS 2.1 artikel-nr: 17753 End clamp for fast mounting 30 drawing number: 802304-30V A product-nr: 802304-30V L=50mm Incl. Opening-function for Frame height 30 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,046 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 16481 End clamp for fast mounting 31 drawing number: 802304-31V B product-nr: 802304-31V L=50mm Incl. Opening-function for Frame height 31 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,046 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 18079 End clamp for fast mounting 33 drawing number: 802304-33V A product-nr: 802304-33V L=50mm Incl. Opening-function for Frame height 33 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,048 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette Solar.pro.tool Solar Thermal Energy Laminate Clamps Aerocompact 2.0 43
clamps artikel-nr: 15786 End clamp for fast mounting 34 drawing number: 802304-34V B product-nr: 802304-34V L=50mm Incl. Opening-function for Frame height 34 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,048 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 15787 End clamp for fast mounting 35 drawing number: 802304-35V B product-nr: 802304-35V L=50mm Incl. Opening-function for Frame height 35 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,048 kg/stk 20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 15789 End clamp for fast mounting 36 drawing number: 802304-36V B product-nr: 802304-36V L=50mm Incl. Opening-function for Frame height 36 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,049 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 15790 End clamp for fast mounting 38 drawing number: 802304-38V B product-nr: 802304-38V L=50mm Incl. Opening-function for Frame height 38 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,050 kg/stk 20 Stk. pro Karton / 7.000 Stk. pro Palette 44
clamps artikel-nr: 15791 End clamp for fast mounting 40 drawing number: 802304-40V B product-nr: 802304-40V L=50mm Incl. Opening-function for Frame height 40 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,051 kg/stk 20 Stk. pro Karton / 7.000 Stk. pro Palette Pitched Roof AS 2.1 artikel-nr: 15792 End clamp for fast mounting 42 drawing number: 802304-42V B product-nr: 802304-42V L=50mm Incl. Opening-function for Frame height 42 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,051 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 15793 End clamp for fast mounting 43 drawing number: 802304-43V B product-nr: 802304-43V L=50mm Incl. Opening-function for Frame height 43 mm for Mounting profiles with threaded plate canel M8 EN AW 6063 / T66; A2-70 0,052 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 15795 End clamp for fast mounting 45 drawing number: 802304-45V B product-nr: 802304-45V L=50mm Incl. Opening-function for Frame height 45 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,052 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette Solar.pro.tool Solar Thermal Energy Laminate Clamps Aerocompact 2.0 45
clamps artikel-nr: 15794 End clamp for fast mounting 46 drawing number: 802304-46V B product-nr: 802304-46V L=50mm Incl. Opening-function for Frame height 46 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,053 kg/stk 20 Stk. pro Karton / 7.000 Stk. pro Palette artikel-nr: 15797 End clamp for fast mounting 50 drawing number: 802304-50V B product-nr: 802304-50V L=50mm Incl. Opening-function for Frame height 50 mm for Mounting profiles with threaded plate channel M8 EN AW 6063 / T66; A2-70 0,054 kg/stk *20 Stk. pro Karton / 7.000 Stk. pro Palette standard parts/accessories artikel-nr: 14730 Hexagon screw drawing number: 800623 DIN 933 product-nr: 800623 M10x25 A2-70 SW17 2,370 kg/100 Stk. 100 Stk. artikel-nr: 15325 Hexagon screw drawing number: 800626 DIN 933 product-nr: 800626 M16x35 A2-70 SW24 8,350 kg/100 Stk. 50 Stk. 46
standard parts/accessories artikel-nr: 15052 Hexagon nut drawing number: 800634 DIN 6923 product-nr: 800634 M10 A2-70 with flange and serration 1,120 kg/100 Stk. 100 Stk. Pitched Roof AS 2.1 artikel-nr: 15591 Hexagon nut drawing number: 800636 DIN 6923 B product-nr: 800636 M16 A2-70 with flange and serration 5,000 kg/100 Stk. 50 artikel-nr: 15453 Hammerhead screw drawing number: 800646 product-nr: 800646 M10x25 A2-70 1,990 kg/100 Stk. 100 Stk. artikel-nr: 16699 Flat washer drawing number: 800654 DIN125 product-nr: 800654 A17 A2-70 1,014 kg/100 Stk. 100 Stk. Solar.pro.tool Solar Thermal Energy Laminate Clamps Aerocompact 2.0 47
landscape 2.1 artikel-nr: 17683 Strut Landscape drawing number: 800762-355 C product-nr: 800762-355 L=900 galvanized from angle profile 60x30x5 Steel S355 JR 2,983 kg/stk artikel-nr: 17685 Connecting angle Landscape drawing number: 800763-355 C product-nr: 800763-355 L=80 mm galvanized from angle profile 80x65x6 Steel S355 JR 0,500 kg/stk artikel-nr: 17038 Seperation TP65-95 drawing number: 800764 D product-nr: 800764 60x80x1,5 EPDM For Mounting profiles 65-95 with elongated hole 0,010 kg/stk artikel-nr: 17335 Post Landscape C-130 drawing number: 800765-355 C product-nr: 800765-355 L=3.200 mm galvanized Steel S355 JR 7,250 kg/mtr 48
landscape 2.1 artikel-nr: 17681 Beam Landscapce C-120/3 drawing number: 800766-355 C product-nr: 800766-355 L=2.600mm galvanized For inclination angle from 18-35 Steel S355 JR 6,000 kg/mtr Pitched Roof AS 2.1 Solar.pro.tool Solar Thermal Energy Laminate Clamps Aerocompact 2.0 Notes 49
Aerocompact 2.0 S O L A R M O U N T I N G S Y S T E M 10 YEARS Best Functionality QUALITY WARRANTY new! Version 2.0 AEROCompact 2.0 S & AEroCompact 2.0 + Aerodynamic Flat Roof Mounting System your big advantage After two very successful years, in which more than 70 MW Aerocompact-Systems were built, now version 2.0 is here. Beside the usual simplicity and reliability, the new 2.0 version has more distance to the roofing which makes it easier to compensate roof unevenness and to simplify the wire management. It comes with a new ballast tray that can be used for all system types. With this version more ballast can be installed for high wind loads and the point loads are evenly distributed in the case of soft roof insulation. Another benefit is the new inter-row spacing which is calculated with a 18- or 25- degree sun angle for the optimal roof layout per location. Pre-assembled mounting clips provide additional hold to the attached protection pads with aluminum coating. + + quick and easy installation 1 kwp in 5 min. with 2 men + + more distance to the roofing + + new ballast tray for all systems + + module clamps with integrated grounding + + pre-assembled mounting clips for protection pads + + less single components + + corrosion-resistant + + optimal water drain + + wind tunnel tested and statically verified + + examined acc. to Fire-Test UL1703 and load test acc. to IEC 61215 (TÜV-Rheinland) Aerocompact 2.0 S Aerocompact 2.0 + MADE IN EUROPE CONFORMS TO SUB 2703 50
10 15 270 mm Aerocompact 2.0 s Aerocompact 2.0 + 950-1050 mm 950-1050 mm 1461-1563 mm ca. 273 mm 446 mm 527 mm 270 mm 694 mm 790 mm 1704-1807,5 mm ca. 359 mm 270 mm 950-1050 mm 208 mm ca. 274 mm 2320-2525 mm 50 Aerocompact 2.0 336 mm 200 mm 247 mm pitched roof AS 2.1 Ballast tray for all systems Technical specifications Min. load bearing reserve of the roof structure(*): 10 kg/m² 15 kg/m² Min. system size: 2 rows at 3 moduls / 3 rows at 2 moduls rows at 2 double-moduls General specifications Material of flat roof structure: Aluminium EN AW 6060 and wind-deflector galvanized steel; small parts: A2-70 Standard configuration: Pressure load up to 2,4 kn/m² (**); suction load up tp 2,4 kn/m² (***) Alpin configuartion: Pressure load up to 4,4 kn/m² (**); suction load up tp 2,4 kn/m² (***) For the following module dimensions: Edge distance: Aerocompact 2.0 S with shorter row spacing for 25 sung angle available! 950 1050 mm 1559 1982 mm Roof area F and G can be used optionally (minimum edge distance: 600 mm) Roof conditions: We require the use of a roof insulation with a high load capacity of the type DAA-ds according to DIN 4108-10. ensure at site that the roof substructure and other affected roof layers have adequate load bearing capacity. Solar.pro.tool Solar Thermal Energy Laminate Clamps Aerocompact 2.0 Max. inclination of flat roof: Up to 4 or up to 5 depending on roofing or with additional security measures Max. building height: Module fixation: Transport volumes: 25 m By clamps at the short side of the modules Approx. 40 KW/range; 700 KW/truck Accessory: earthing clamp for potential equalization, ballast tray, ridge connection for slope over 3, earthquake protection (*) The actual required load bearing reserve will be calculated project-related and is depending on the local wind and snow load assumptions (**) Design-value as a load combination from dead load, wind pressure and snow (***) Design-value as a load combination from dead load and wind pressure 51