Committed to your success!

Committed to your success! 800-99-9876 www.jarviscaster.com

Listed by NSF 13 Series Threaded Stem 7 Series Expanding Adapter up to 160 lbs each -13-01G STEM 3-7-01G 19A : Bright zinc plated finish Hardened double ball bearing raceways 1/" diameter kingpin Standard /16" diameter axle with locknut 13 Series Threaded Stem: Mounting Stem Code Size STEM 3 1/"-13 x 1" STEM 1/"-13 x 1-1/" OPTIONS: VertiLoc brake; Add VL to end of model number (See brake photos on page 11) 7 Series Expanding Adapter: Tubing Tubing Mounting I.D. Mounting I.D. Code Size Code Size 9 3/" 17 B 1-3/16 11 7/8 19 C 1-3/8 13 1 19 A 1-1/ 1 1-1/8 1 1-7/8 3 Type Threaded Stem 13 Series Expanding Adapter Model 7 Series Cushion / Solid Rubber Delrin 100 3-13-103 3-7-103 1/16 TPR / Poly Core Plain 1 3-13-01G 3-7-01G Hard / Solid Rubber Delrin 1 3-13-10 3-7-10 1 1/8 Polyolefin Plain 1 3-13-11 3-7-11 Cushion / Solid Rubber Delrin 11-13-103-7-103 1/16 TPR / Poly Core Plain 1-13-01G -7-01G Hard / Solid Rubber Delrin 10-13-10-7-10 Polyolefin Plain 10-13-11-7-11 1 PolyLoc / Grey Delrin 10-13-11G -7-11G Cushion / Solid Rubber Delrin 1-13-103-7-103 1/16 TPR / Poly Core Plain 10-13-01G -7-01G Hard / Solid Rubber Delrin 10-13-10-7-10 Polyolefin Plain 10-13-11-7-11 1 PolyLoc / Grey Delrin 160-13-11G -7-11G Load Height Swivel Radius 1-1/8 3 /8 3/ 1-1/ /8 3 /16 1-7/8 /8 --01G PLT -6-01G PLT /6 Series Top Plate up to 160 lbs each /6 Series Top Plate 3 Suffix 1-3/ Number -3/ PLT 3-/8 /16 bolt holes 3 Swivel Plate Rigid Plate Type Series 6 Series Cushion / Solid Rubber Delrin 100 3--103 3-6-103 1/16 TPR / Poly Core Plain 1 3--01G 3-6-01G Hard / Solid Rubber Delrin 1 3--10 3-6-10 1 1/8 Polyolefin Plain 1 3--11 3-6-11 Cushion / Solid Rubber Delrin 11 --103-6-103 1/16 TPR / Poly Core Plain 1 --01G -6-01G Hard / Solid Rubber Delrin 10 --10-6-10 Polyolefin Plain 10 --11-6-11 1 PolyLoc / Grey Delrin 10 --11G -6-11G Cushion / Solid Rubber Delrin 1 --103-6-103 1/16 TPR / Poly Core Plain 10 --01G -6-01G Hard / Solid Rubber Delrin 10 --10-6-10 Polyolefin Plain 10 --11-6-11 1 PolyLoc / Grey Delrin 160 --11G -6-11G Load Height Swivel Radius 1-1/8 3 3 / 3/ 1-1/ 3 / 3 /16 1-7/8 3 / WHEEL SELECTION: Cushion & HARD / Solid Rubber TPR / Poly Core POLYOLEFIN PolyLoc / Grey To order: Threaded Stem caster add mounting code (Example 3-13-11-STEM 3). Expanding Adapter Stem caster add mounting code (Example 3-13-11 9). Top plate caster add mounting code (Example 3--103 PLT ). www.jarviscaster.com Toll Free: 800-99-9876

30 Series Top Plate 36 Series Threaded Stem up to 3 lbs each : Bright zinc plated finish Hardened double ball raceways 1/ diameter kingpin Dust cover protects swivel bearings Standard 3/8 diameter axle with locknut OPTIONS: VertiLoc brake; Add VL to end of number PosiLoc brake; Add PL to end of number (See brake photos on page 11) Listed by NSF Top Plate Sizes (swivel & rigid): to order, add Plate Mounting Code to end of model number (Example: -30-10 PLT1). 30 Series Bolt Hole Bolt Top Plate Size Mounting Code Spacing Size PLT -3/8 x 3-/8 1-3/ x 3 /16 PLT 3 3-1/8 x -1/8-3/8 x 3-7/16 /16 PLT 3-1/", ", " & 6" dia. only PLT 7 " dia. only 3-3/ x -1/ 3-1/ x 3-1/ -/8 x 3-/8 to 3 x 3 -/8 x -/8 to 3 x 3 3/8 9/3 36 Series Threaded Stem: Mounting Code Stem Number Size STEM 1/"-13 x 1" STEM 3 1/"-13 x 1-1/" STEM 6 /8"-11 x 1-1/" -30-13P PLT Threaded Stem sizes: to order, add Stem Mounting Code to end of model number (Example: -36-10 STEM). -36-13GD STEM Type Swivel Plate 30 Series Threaded Stem 36 Series 1/ 1 1/ Cushion / Solid Rubber Hard / Solid Rubber Delrin Delrin 10 10-1/-30-10 -1/-30-106 -1/-36-10 -1/-36-106 1-11/16 1-11/16 Polyolefin Plain 10-1/-30-13 -1/-36-13 1-11/16 3 Cushion / Solid Rubber Delrin 10 3-30-10 3-36-10 1-3/ 1 1/ Hard / Solid Rubber Delrin 0 3-30-106 3-36-106 1-3/ Polyolefin Plain 0 3-30-1 3-36-1 1-3/ Cushion / Solid Rubber HEAT FLAT* Delrin SS BALL 160 3-1/-30-10 3-1/-36-10 3-1/-30-13RTF 3-1/-36-13RTF -3/16 HEALTh SS BALL 3-1/-30-13MF 3-1/-36-13MF -3/16 3 1/ 1 1/ Hard / Solid Rubber Delrin 30 3-1/-30-106 3-1/-36-106 Polyolefin Plain 0 3-1/-30-13 3-1/-36-13 -3/16 TPR / Flat* Ball 0 3-1/-30-13GF 3-1/-36-13GF -3/16 PolyLoc / BLUE Ball 0 3-1/-30-13P 3-1/-36-13P -3/16 PolyLoc / Grey Delrin 0 3-1/-30-31G 3-1/-36-31G -3/16 Cushion / Solid Rubber Delrin 170-30-10-36-10-3/8 Hard / Solid Rubber Delrin 0-30-106-36-106-3/8 HEAT FLAT* SS BALL 0-30-13RTF -36-13RTF -1/ HEALTh SS BALL 0-30-13MF -36-13MF -1/ 1 1/ PolyLoc / BLUE Ball 7-30-13P -36-13P -1/ PolyLoc / Grey Delrin 7-30-31G -36-31G -1/ Polyolefin Plain 7-30-13-36-13-1/ TPR / Flat* Ball 300-30-13GF -36-13GF -1/ PHENOLIC PLAIN 300-30-11-36-11-1/ 1 1/ Cushion / Solid Rubber Delrin 00-30-10-36-10-3/ HEAT FLAT* SS BALL 0-30-13RTF -36-13RTF 3 HEALTh SS BALL 0-30-13MF -36-13MF 3 Hard / Solid Rubber Delrin 80-30-106-36-106-3/ PolyLoc / Blue Ball 300-30-13P -36-13P 3 PolyLoc / Grey Delrin 300-30-31G -36-31G 3 Polyolefin Plain 300-30-13-36-13 3 TPR / Flat* Ball 3-30-13GF -36-13GF 3 PHENOLIC PLAIN 300-30-11-36-11 3 Cushion / Solid Rubber Delrin 0 6-30-10 6-36-10 3-1/8 TPR / Round Ball 300 6-30-13GD 6-36-13GD 3-3/ 1 1/ PolyLoc / Grey Delrin 300 6-30-31G 6-36-31G 3-3/ PolyLoc / Blue BALL 300 6-30-13P 6-36-13P 3-3/ 6 HEAT FLAT SS BALL 3 6-30-13rTF 6-36-13RTF 3-3/ HEAlTH SS Ball 3 6-30-13MF 6-36-13MF 3-3/ Polyolefin Plain 300 6-30-1 6-36-1 3-3/ PHENOLIC Plain 300 6-30-11 6-36-11 3-3/ Load Height (Plate) Load Swivel Height Radius (Threaded) 3 /8 3 7/16 3/ 1/8 3 1/16 3 /8 7/16 3 1/ 1/8 1/16 3 1/ 6 1/ 6 1/16 7 1/ 7 1/16 1/ *Round tread wheels available for TPR and Heat. Consult factory for temperature range and weight capacity on Heat wheels. To order use wheel code: TPR=13GD, Heat=13RTR. To order rigid top plate caster change 30 to 31 mounting code (Example -1/-31-10 PLT ). CUSHION / SOLID RUBBER HARD / SOLID RUBBER ADVANTAGE TPR / FLAT AND ROUND POLYOLEFIN POLYLOC / POLYLOC / GREY BLUE PHENOLIC Heat Flat or Round Health Antimicrobial www.jarviscaster.com Toll Free: 800-99-9876 3

Listed by NSF 3/0 Series Stems up to 3 lbs each : Bright zinc plated finish Hardened double ball bearing swivel raceways 1/ diameter kingpin Dust cover protects swivel bearings Standard 3/8 diameter axle with locknut OPTIONS: VertiLoc brake; Add VL to end of number PosiLoc brake; Add PL to end of number (See brake photos on page 11) Round - Spring Ring Stem: Mounting Stem Code Size STEM 3.8 dia. x -3/16" STEM.86 dia. x -3/16" Square - Spring Ring Stem: Mounting Stem Code Size STEM 6.860 sq. x -3/16" STEM 7.87 sq. x -1/" w/ holes -3-13GD STEM 3-0-31G 19A Adapter Kit Parts Knurled Nut Rubber Bushing Plastic Bushing Base Washer Rubber Expanding Adapters Adapter Number ID of Round or Square Tube 9 3/ 0.70-0.81 11* 7/8 0.8-0.97 13 1 0.98-1.09 1 1-1/8 1.030-1.10 17B 1-3/16 1.178-1.303 19C* 1-3/8 1.360-1. 19A 1-1/ 1.6-1.89 1 1-7/8 1.790-1.80 *Stainless Steel knurled nut and base washer. Tube Size Range Type Spring Ring 3 Series Expanding Adapter Model 0 Series Load Height (Threaded) Swivel Radius Cushion / Solid Rubber Delrin 160 3-1/-3-10 3-1/-0-10 HEAT FLAT* SS BALL 3-1/-3-13RTF 3-1/-0-13RTF -3/16 HEALTh SS BALL 3-1/-3-13MF 3-1/-0-13MF -3/16 3 1/ 1 1/ Hard / Solid Rubber Delrin 30 3-1/-3-106 3-1/-0-106 Polyolefin Plain 0 3-1/-3-13 3-1/-0-13 -3/16 7/16 3 1/ TPR / Flat* Ball 0 3-1/-3-13GF 3-1/-0-13GF -3/16 PolyLoc / BLUE Ball 0 3-1/-3-13P 3-1/-0-13P -3/16 PolyLoc / Grey Delrin 0 3-1/-3-31G 3-1/-0-31G -3/16 Cushion / Solid Rubber Delrin 170-3-10-0-10-3/8 Hard / Solid Rubber Delrin 0-3-106-0-106-3/8 HEAT FLAT* SS BALL 0-3-13RTF -0-13RTF -1/ HEALTh SS BALL 0-3-13MF -0-13MF -1/ 1 1/ PolyLoc / BLUE Ball 7-3-13P -0-13P -1/ 1/16 3 1/ PolyLoc / Grey Delrin 7-3-31G -0-31G -1/ Polyolefin Plain 7-3-13-0-13-1/ TPR / Flat* Ball 300-3-13GF -0-13GF -1/ PHENOLIC PLAIN 300-3-11-0-11-1/ Cushion / Solid Rubber Delrin 00-3-10-0-10-3/ HEAT FLAT* SS BALL 0-3-13RTF -0-13RTF 3 HEALTh SS BALL 0-3-13MF -0-13MF 3 Hard / Solid Rubber Delrin 80-3-106-0-106-3/ 1 1/ PolyLoc / Blue Ball 300-3-13P -0-13P 3 6 1/16 PolyLoc / Grey Delrin 300-3-31G -0-31G 3 Polyolefin Plain 300-3-13-0-13 3 TPR / Flat* Ball 3-3-13GF -0-13GF 3 PHENOLIC PLAIN 300-3-11-0-11 3 *Round tread wheels available for TPR and Heat. Consult factory for temperature range and weight capacity on Heat wheels. To order use wheel code: TPR=13GD, Heat=13RTR. To order add mounting code (Example 3-1/-3-10-STEM3). WHEEL SELECTION: CUSHION / SOLID RUBBER HARD / SOLID RUBBER ADVANTAGE TPR / FLAT AND ROUND POLYOLEFIN POLYLOC / POLYLOC / GREY BLUE PHENOLIC www.jarviscaster.com Toll Free: 800-99-9876 Heat Flat or Round Health Antimicrobial

3 Series Adjustable Load Height Casters up to 3 lbs each : -3-10 STEM -VL Adjustable load height casters allow you to level your equipment on uneven kitchen floors Bright zinc plated finish Hardened double ball bearing swivel raceways 1/ diameter kingpin Dust cover protects swivel bearings Standard 3/8 diameter axle with locknut OPTIONS: VertiLoc brake; Add VL to end of number PosiLoc brake; Add PL to end of number (See brake photos on page 11) Listed by NSF Tapped Hole Mounting Code Stem Size STEM 1-1/" x " with 3/" -10 tapped hole STEM 6 1-/8" x -1/8" with 3/"-10 tapped hole Type Adjustable Height Model 3 Series Cushion / Solid Rubber Delrin 170-3-10-3/8 Hard / Solid Rubber Delrin 0-3-106-3/8 HEAT FLAT* SS BALL 0-3-13RTF -1/ HEALTh SS BALL 0-3-13MF -1/ 1 1/ PolyLoc / BLUE Ball 7-3-13P -1/ PolyLoc / Grey Delrin 7-3-31G -1/ Polyolefin Plain 7-3-13-1/ TPR / Flat* Ball 300-3-13GF -1/ PHENOLIC PLAIN 300-3-11-1/ Cushion / Solid Rubber Delrin 00-3-10-3/ HEAT FLAT* SS BALL 0-3-13RTF 3 HEALTh SS BALL 0-3-13MF 3 Hard / Solid Rubber Delrin 80-3-106-3/ 1 1/ PolyLoc / Blue Ball 300-3-13P 3 PolyLoc / Grey Delrin 300-3-31G 3 Polyolefin Plain 300-3-13 3 TPR / Flat* Ball 3-3-13GF 3 PHENOLIC PLAIN 300-3-11 3 Load Height (Threaded) *Round tread wheels available for TPR and Heat. Consult factory for temperature range and weight capacity on Heat wheels. To order use wheel code: TPR=13GD, Heat=13RTR. To order add mounting code (Example -3-10-STEM ). Swivel Radius Adjustable 3 1/ Adjustable Adjustable load height stem caster especially designed for food service equipment. Ring on stem marks maximum adjustment height when mounted on threaded stem equipment leg. WHEEL SELECTION: CUSHION / SOLID RUBBER HARD / SOLID RUBBER ADVANTAGE TPR / FLAT AND ROUND POLYOLEFIN POLYLOC / POLYLOC / GREY BLUE www.jarviscaster.com Toll Free: 800-99-9876 PHENOLIC Heat Flat or Round Health Antimicrobial

Listed by NSF 36 Series Adjustable Load Height Casters up to 3 lbs each : -36-13 SATP PLT Special caster has adjustable load height of 7 3 / to 9 1 / Height adjustment is achieved by turning the stem until the desired height is reached, then stem locks in place with a set screw. Bright zinc plated finish Hardened double ball bearing swivel raceways 1/ diameter kingpin Dust cover protects swivel bearings Standard 3/8 diameter axle with locknut OPTIONS: VertiLoc brake; Add VL to end of number PosiLoc brake; Add PL to end of number (See brake photos on page 11) Mounting Top Plate Size Bolt Hole Mounting Code Spacing Bolt Size PLT -3/8 x 3-/8 1-3/ x 3 /16 PLT 7 3-1/ x 3-1/ -/8 x -/8 to 3 x 3 9/3 To order: Add mounting code (Example 3-36-1-SATP PLT ). Special food service caster has adjustable load height of 7 3 / to 9 1 /. Height adjustment is achieved by turning the stem until the desired height is reached. Stem locks in place with a set screw. 1 1 /" Adjustable Type Add mounting code (Example 3-36-1-SATP PLT ). Adjustable Height Model 36 Series Load Height Swivel Radius 3 1 1/ Polyolefin Plain 0 3-36-1 SAPT -1/ Adjustable 3 1 1/ Polyolefin Plain 7-36-13 SAPT -3/8 Adjustable 3 1/ 1 1/ Polyolefin Plain 300-36-13 SAPT -3/ Adjustable WHEEL SELECTION: Standard stocking wheel is polyolefin. These wheels also available as special order, consult Jarvis. CUSHION / SOLID RUBBER HARD / SOLID RUBBER ADVANTAGE TPR / FLAT AND ROUND POLYOLEFIN POLYLOC / POLYLOC / GREY BLUE PHENOLIC 6 www.jarviscaster.com Toll Free: 800-99-9876 Heat Flat or Round Health Antimicrobial

-S30-13WH S30 Series Stainless Steel Top Plate up to 3 lbs each : Polished 30 Stainless steel finish Double ball bearing swivel raceways Grease sealed raceways with zerk 1/ diameter kingpin Stainless 3/8 diameter axle with locknut OPTIONS: Black and white polyolefin wheels available- For white polyolefin wheels add WH after 13 (Example: -S30-13WH) VertiLoc brake; Add VL to end of number PosiLoc brake; Add PL to end of number (See brake photos on page 11) S30/31 Top Plate Sizes (swivel & rigid): to order, add Mounting. Code to end of model number (Example: -30-31 PLT ). Mounting Top Plate Size Bolt Hole Mounting Code Spacing Bolt Size PLT -3/8 x 3-/8 1-3/ x 3 /16 PLT 3-3/ x -1/ -/8 x 3-/8 to 3 x 3 3/8 Listed by NSF -S31-31GF 1 1/ Type Swivel Caster S30 Series Rigid Caster S31 Series TPR / Round Delrin 0 -S30-31GD -S31-31GD -1/ TPR / Flat Delrin 300 -S30-31GF -S31-31GF -1/ Polyolefin SS Sleeve 300 -S30-13 -S31-13 -1/ PolyLoc / Grey Delrin 300 -S30-31G -S31-31G -1/ Heat Flat 1 SS Ball 300 -S30-13RTF -S31-13RTF -1/ Health SS Ball 300 -S30-13MF -S31-13MF -1/ Phenolic SS Sleeve 300 -S30-11 -S31-11 -1/ Hi-Temp Resin PLain 300 -S30-1HT -S31-11HT -1/ TPR / Round SS Ball 0 -S30-13GD -S31-13GD -3/ Polyolefin SS Sleeve 300 -S30-13 -S31-13 -3/ 1 1/ Welded Disc / polyurethane SS Sleeve 300 -S30-113P -S31-113P -3/ PolyLoc / Grey SS BALL 300 -S30-13G -S31-13G -3/ Heat Flat 1 SS Ball 300 -S30-13RTF -S31-13RTF -3/ Health SS Ball 300 -S30-13MF -S31-13MF -3/ TPR / Flat Delrin 3 -S30-13GF -S31-13GF -3/ Hi-Temp Resin Plain 3 -S30-1NHT -S31-NHT -3/ Phenolic SS Sleeve 300 -S30-11 -S31-11 -3/ TPR / Round Delrin 300 6-S30-31GD 6-S31-31GD 3-1/ 6 1 1/ Polyolefin SS Sleeve 300 6-S30-1 6-S31-1 3-1/ PolyLoc / Grey 1 SS Ball 300 6-S30-13G 6-S31-13G 3-1/ Heat Flat SS BALL 3 6-S30-13RTF 6-S31-13RTF 3-1/ Health SS BALL 3 6-S30-13MF 6-S31-13MF 3-1/ Phenolic SS Sleeve 300 6-S30-11 6-S31-11 3-1/ 1Delrin bearing also available, consult factory. Heat round treads also available, change RTR to RTF. Load Height Swivel Radius 1/16 3 1/ 6 1/8 7 3/16 1/ WHEEL SELECTION: CUSHION / SOLID RUBBER ADVANTAGE TPR / FLAT AND ROUND POLYOLEFIN POLYLOC / GREY Heat Flat or Round Health Antimicrobial WELDED DISC POLYURETHANE www.jarviscaster.com Toll Free: 800-99-9876 7

Listed by NSF S3/S36/S0 Series Stainless Steel Stem Casters up to 3 lbs each -S3-1G : Polished 30 stainless steel finish Double ball bearing swivel raceways Grease sealed raceways with zerk 1/ diameter kingpin Stainless 3/8 diameter axle with locknut -S36-13 OPTIONS: Black and white polyolefin wheels available- For white polyolefin wheels add WH after 13 (Example: -S30-13WH) VertiLoc brake; Add VL to end of number PosiLoc brake; Add PL to end of number (See brake photos on page 11) S3 Spring Ring standard size is.8 diameter x -3/16 long. No mounting code necessary. -S0-1GD 19A Adapter Kit Parts Knurled Nut Rubber Bushing Plastic Bushing Base Washer S36 Threaded Stem standard size 1/ diameter 13 x 1-1/ long. Other sizes available. S0 Rubber Expanding Adapters Adapter Number ID of Round or Square Tube 9 3/ 0.70-0.81 11* 7/8 0.8-0.97 13 1 0.98-1.09 1 1-1/8 1.030-1.10 17B 1-3/16 1.178-1.303 19C* 1-3/8 1.360-1. 19A 1-1/ 1.6-1.89 1 1-7/8 1.790-1.80 *Stainless Steel knurled nut and base washer. Tube Size Range Type Spring Ring Stem Model S3 Series Threaded Stem Model S36 Series Expanding Adapter Model S0 Series TPR / Round Delrin 0 -S3-31GD -S36-31GD -S0-31GD -1/ TPR / Flat Delrin 300 -S3-31GF -S36-31GF -S0-31GF -1/ 1 1/ Polyolefin SS Sleeve 300 -S3-13 -S36-13 -S0-13 -1/ PolyLoc / Grey Delrin 300 -S3-31G -S36-31G -S0-31G -1/ Heat Flat 1 SS Ball 300 -S3-13RTF -S36-13RTF -S0-13RTF -1/ Health SS Ball 300 -S3-13MF -S36-13MF -S0-13MF -1/ Phenolic SS Sleeve 300 -S3-11 -S36-11 -S0-11 -1/ Hi-Temp Resin PLain 300 -S3-1HT -S36-11HT -S0-11HT -1/ TPR / Round SS Ball 0 -S3-13GD -S36-13GD -S0-13GD -3/ Polyolefin SS Sleeve 300 -S3-13 -S36-13 -S0-13 -3/ 1 1/ Welded Disc / polyurethane SS Sleeve 300 -S3-113P -S36-113P -S0-113P -3/ PolyLoc / Grey SS BALL 300 -S3-13G -S36-13G -S0-13G -3/ Heat Flat 1 SS Ball 300 -S3-13RTF -S36-13RTF -S0-13RTF -3/ Health SS Ball 300 -S3-13MF -S36-13MF -S0-13MF -3/ TPR / Flat Delrin 3 -S3-13GF -S36-13GF -S0-13GF -3/ Hi-Temp Resin Plain 3 -S3-1NHT -S36-NHT -S0-NHT -3/ Phenolic SS Sleeve 300 -S3-11 -S36-11 -S0-11 -3/ TPR / Round Delrin 300 6-S3-31GD 6-S36-31GD 6-S0-31GD 3-1/ 6 1 1/ Polyolefin SS Sleeve 300 6-S3-1 6-S36-1 6-S0-1 3-1/ PolyLoc / Grey 1 SS Ball 300 6-S3-13G 6-S36-13G 6-S0-13G 3-1/ Heat Flat SS BALL 3 6-S3-13RTF 6-S36-13RTF 6-S0-13RTF 3-1/ Health SS BALL 3 6-S3-13MF 6-S36-13MF 6-S0-13MF 3-1/ Phenolic SS Sleeve 300 6-S3-11 6-S36-11 6-S0-11 3-1/ 1Delrin bearing also available, consult factory. Heat round treads also available, change RTR to RTF. Load Height Swivel Radius 1/16 3 1/ 6 7 1/16 1/ WHEEL SELECTION: CUSHION / SOLID RUBBER ADVANTAGE TPR / FLAT AND ROUND POLYOLEFIN POLYLOC / GREY Heat Flat or Round Health Antimicrobial WELDED DISC POLYURETHANE 8 www.jarviscaster.com Toll Free: 800-99-9876

-130- PlT 130 Series Top Plate up to 00 lbs each : Heavy gauge cold rolled steel, formed for strength and heat treated. Dust Cap protects swivel raceway bearings and improves performance. Bright zinc plating to resist rust and corrosion. Swivel Construction: double ball bearing with hardened raceways. sizes 3, and use 3/8 dia axle. sizes 6 and 8 use 1/ diameter axle. King Pin: 1/ steel rivet Fork Leg Spacing: OPTIONS: VertiLoc brake; Add VL to end of number (See brake photos on page 11) Swivel Grease Seal: Includes zerk grease fitting in dust cap. To order, add GS to end of model number. Optional Plate Sizes: variety of plate sizes available consult factory. Listed by NSF -131-1GF PlT 130/131: Top Plate Sizes (swivel & rigid): to order, add Plate Mounting Code to end of model number. (Example: -130- PLT ) Mounting Top Plate Size Bolt Hole Mounting Code Spacing Bolt Size PLT 1-3/8 x 3-/8 1-3/ x 3 1/ PLT -3/8 x 3-/8 1-3/ x 3 /16 PLT 3 3-1/8 x -1/8-3/8 x 3-7/16 /16 PLT x 3 x 3 3/8 PLT 3-3/ x -1/ -/8 x 3-/8 to 3 x 3 3/8 PLT 7 3-1/ x 3-1/ -/8 x -/8 9/3 Swivel Caster Rigid Caster Type Load Swivel Height Radius 130 Series 131 Series 3 1 13/16 Polyolefin Roller 00 3-130-3 3-131-3 1-3/ 3/8 Cushion / Solid Rubber Plain -130-109 -131-109 -1/8 Cushion / Solid Rubber Roller -130-09 -131-09 -1/8 1 /8 Hard / Solid Rubber Plain 00-130-110-131-110-1/8 Hard / Solid Rubber Roller 00-130-10-131-10-1/8 Phenolic Plain 00-130-11-131-11-1/8 3/8 3 1/ Phenolic Roller 00-130-1-131-1-1/8 Polyolefin Plain 00-130-1-131-1-1/8 Polyolefin Roller 00-130- -131- -1/8 Cushion / Solid Rubber Plain 60-130-109-131-109-3/ Cushion / Solid Rubber Roller 60-130-09-131-09-3/ 1 /8 Hard / Solid Rubber Plain 00-130-110-131-110-1/ Hard / Solid Rubber Roller 00-130-10-131-10-1/ 6 1/ 6 8 Phenolic Plain 00-130-11-131-11-1/ Phenolic Roller 00-130-1-131-1-1/ Polyolefin Plain 00-130-1-131-1-3/ Polyolefin Roller 00-130- -131- -3/ TPR / Flat Roller 00-130-1GF -131-1GF -1/8 PolyLoc / Grey Roller 00-130-1G -131-1G -1/8 PolyLoc / Blue Roller 00-130-1P -131-1P -1/8 Phenolic Plain 00 6-130-11 6-131-11-3/ Phenolic Roller 00 6-130-1 6-131-1-3/ Polyolefin Delrin 00 6-130-3 6-131-3-3/ Polyolefin Roller 00 6-130- 6-131- -3/ TPR / Flat Roller 00 6-130-1GF 6-131-1GF -3/ PolyLoc / Grey Roller 00 6-130-1G 6-131-1G -3/ PolyLoc / Blue Roller 00 6-130-1P 6-131-1P -3/ TPR / Flat Roller 0 8-130-1GF 8-131-1GF 3 PolyLoc / Grey Roller 0 8-130-1G 8-131-1G 3 PolyLoc / Blue Roller 0 8-130-1P 8-131-1P 3 Polyolefin Delrin 0 8-130-3 8-131-3 3 Polyolefin Roller 0 8-130- 8-131- 3 7 1/ 3/ 9 1/ 6 1/ WHEEL SELECTION: Cushion or Hard Rubber TPR Flat Phenolic Polyolefin PolyLoc Grey PolyLoc Blue www.jarviscaster.com Toll Free: 800-99-9876 9

Listed by NSF -13-1G STEM 1-136-1GF STEM 1 13/136 Series Stems up to 00 lbs each : Heavy gauge cold rolled steel, formed for strength and heat treated. Dust Cap protects swivel raceway bearings and improves performance. Bright zinc plating to resist rust and corrosion. Swivel Construction: double ball bearing with hardened raceways. sizes 3, and use 3/8 dia axle. sizes 6 and 8 use 1/ diameter axle. King Pin: 1/ steel rivet Fork Leg Spacing: 13 Series Spring Ring: to order, specify stem code number and add to end of caster model number (Example: 6-13-1G STEM 1). Stem Code STEM 1 STEM STEM 3 STEM STEM STEM 6 Stem Sizes 3/ diameter x -3/16 long 13/16 diameter x -3/16 long.8 diameter x -3/16 long.86 diameter x -3/16 long 1 diameter x -3/16 long.860 SQUARE x -3/16 long OPTIONS: VertiLoc brake; Add VL to end of number (See brake photos on page 11) Swivel Grease Seal: Includes zerk grease fitting in dust cap. To order, add GS to end of model number. Optional Plate Sizes: variety of plate sizes available consult factory. 136 Threaded Stem: to order, specify stem code number and add to end of caster model number (Example: 6-136-1G STEM 1). Stem Code STEM 1 STEM STEM 3 STEM STEM STEM 6 STEM 7 STEM 8 Stem Sizes 1/ diameter 13 x 3/ long 1/ diameter 13 x 1 long 1/ diameter 13 x 1-1/ long 1/ diameter 0 x 3/ long 1/ diameter 0 x -1/ long /8 diameter 11 x 1-1/ long /8 diameter 18 x 1-3/ long 3/ diameter 10 x 1 long Spring Ring Stem Threaded Stem Type Load Swivel Height Radius 13 Series 136 Series 3 1 13/16 Polyolefin Roller 00 3-13-3 3-136-3 1-3/ 3 7/8 3/8 Cushion / Solid Rubber Plain -13-109 -136-109 -1/8 Cushion / Solid Rubber Roller -13-09 -136-09 -1/8 1 /8 Hard / Solid Rubber Plain 00-13-110-136-110-1/8 Hard / Solid Rubber Roller 00-13-10-136-10-1/8 Phenolic Plain 00-13-11-136-11-1/8 3/16 3 1/ Phenolic Roller 00-13-1-136-1-1/8 Polyolefin Plain 00-13-1-136-1-1/8 Polyolefin Roller 00-13- -136- -1/8 Cushion / Solid Rubber Plain 60-13-109-136-109-3/ Cushion / Solid Rubber Roller 60-13-09-136-09-3/ 1 /8 Hard / Solid Rubber Plain 00-13-110-136-110-1/ Hard / Solid Rubber Roller 00-13-10-136-10-1/ 6 1/16 6 8 WHEEL SELECTION: Phenolic Plain 00-13-11-136-11-1/ Phenolic Roller 00-13-1-136-1-1/ Polyolefin Plain 00-13-1-136-1-3/ Polyolefin Roller 00-13- -136- -3/ TPR / Flat Roller 00-13-1GF -136-1GF -1/8 PolyLoc / Grey Roller 00-13-1G -136-1G -1/8 PolyLoc / Blue Roller 00-13-1P -136-1P -1/8 Phenolic Plain 00 6-13-11 6-136-11-3/ Phenolic Roller 00 6-13-1 6-136-1-3/ Polyolefin Delrin 00 6-13-3 6-136-3-3/ Polyolefin Roller 00 6-13- 6-136- -3/ TPR / Flat Roller 00 6-13-1GF 6-136-1GF -3/ PolyLoc / Grey Roller 00 6-13-1G 6-136-1G -3/ PolyLoc / Blue Roller 00 6-13-1P 6-136-1P -3/ TPR / Flat Roller 0 8-13-1GF 8-136-1GF 3 PolyLoc / Grey Roller 0 8-13-1G 8-136-1G 3 PolyLoc / Blue Roller 0 8-13-1P 8-136-1P 3 Polyolefin Delrin 0 8-13-3 8-136-3 3 Polyolefin Roller 0 8-13- 8-136- 3 7 /16 3/ 9 /16 6 1/ Cushion or Hard Rubber TPR Flat Phenolic Polyolefin PolyLoc Grey PolyLoc Blue 10 www.jarviscaster.com Toll Free: 800-99-9876

6 8 S81/S8 WHEEL SELECTION: 6-S81-30G Type 6-S8-31WH S81 Series Stainless Steel Top Plate up to 1,0 lbs each : Polished 30 stainless steel finish Double ball bearing swivel raceways /8 diameter kingpin Stainless 1/ diameter axle with locknut Swivel Caster S81 Series OPTIONS: Black or white polyolefin wheels available- For white polyolefin wheels add WH after 31 (Example: -S81-31WH) Upper and lower raceway sealscall for details VertiLoc HD brake; Add VL to end of number Rigid Caster S8 Series ADVANTAGE HEALTH Delrin 37 -S81-30MF -S8-30MF -1/ Polyolefin Plain 60 -S81-31 -S8-31 -1/ PolyLoc / Grey Delrin 700 -S81-30G -S8-30G -1/ Phenolic Delrin 1,000 -S81-3 -S8-3 -1/ TPR / Round Delrin 0 6-S81-30GD 6-S8-30GD 6-1/ ADVANTAGE HEALTH Delrin 600 6-S81-30MF 6-S8-30MF 6-1/ Polyolefin Plain 700 6-S81-31 6-S8-31 6-1/ PolyLoc / Grey Delrin 800 6-S81-30G 6-S8-30G 6-1/ Phenolic Delrin 1,00 6-S81-3 6-S8-3 6-1/ TPR / Round Delrin 0 8-S81-30GD 8-S8-30GD 8 TPR / FLAT Delrin 67 8-S81-30GF 8-S8-30GF 8 Polyolefin Plain 900 8-S81-31 8-S8-31 8 PolyLoc / Grey Delrin 1,000 8-S81-30G 8-S8-30G 8 Phenolic Delrin 1,0 8-S81-3 8-S8-3 8 Top Plate Dimensions: 3-/8 3 3 -/8 3/8 bolt holes -1/ Load Height Swivel Radius 6 1/ /16 71/ 1/16 91/ 61/ Listed by NSF PolyLoc / Grey Polyolefin Polyolefin Phenolic TPR Round or Flat Brake/Swivel Lock Options VertiLoc -VL PosiLoc -PL Consult factory for brake options on each series. VertiLoc HD -VL PosiLoc HD -PL Bolt-on Swivel Lock To order, specify swivel lock part number 3091-. For stainless steel swivel lock order part number 3091-17. www.jarviscaster.com Toll Free: 800-99-9876 11

Listed by NSF -10 Cushion rubber is non-marking and permanently bonded to a hard rubber wheel core. This economical wheel is recommended for light to medium duty loads where noise reduction, floor protection and durability are required. Standard Color / Finish: Black Optional Color / Finish: Grey-consult factory Neoprene: Consult factory Hardness: 7 (± ) Shore A Scale Temperature Range: -30 F to + 160 F Cushion / Solid Rubber s up to 60 lbs each 1/ 1 1/ Delrin 10-1/ -10 1/ 1-1/ 3/8 1 1/ Delrin 10 3-10 1/ 1-1/ 9/16 3 1 1/ Ball 10 3-1 1/ 1-1/ 9/16 3 1/ 1 1/ Delrin 160 3-1/ -10 1/ 1-1/ 3/ 1 1/ Delrin 170-10 1/ 1-1/ 7/8 1 /8 Sintered -109 /8 1-1/16 1-1/ 1 /8 Roller -09 /8 1-1/16 1-1/ 1 1/ Delrin 00-10 1/ 1-1/ 1-1/ 1 1/ Ball 00-1 1/ 1-1/ 1-1/ 1 /8 Sintered 60-109 /8 1-1/16 1-3/ 1 /8 Roller 60-09 /8 1-1/16 1-3/ 1 /8 Delrin 60-309 /8-1/16 1-3/ 1 9/3 Delrin 0 6-10 1/ 1-1/ 1-3/ 6 1 1/ Ball 0 6-1 1/ 1-1/ 1-3/ Hard / Solid Rubber s up to 00 lbs each -106 Hard rubber tread wheels feature one-piece molded construction. These wheels have a higher load capacity than cushion rubber wheels and will not flat-spot while sitting under load (compression set). They are non-marking and offer proven performance under a wide variety of institutional and industrial uses. Standard Color / Finish: Black Hardness: 7 (± ) Shore D Scale Temperature Range: -30 F to + 160 F 1/ 1 1/ Delrin 10-1/ -106 1/ 1-1/ 3/8 1 1/ Delrin 0 3-106 1/ 1-1/ 9/16 3 1 1/ Ball 0 3-16 1/ 1-1/ 9/16 1 1/ Delrin 30 3-1/ -106 1/ 1-1/ 3/ 3 1/ 1 1/ Ball 30 3-1/ -6 * 1/ 1-1/ 3/ 1 1/ Delrin 0-106 1/ 1-1/ 7/8 1 /8 Sintered 300-110 /8 1-1/16 1-1/ 1 /8 Roller 300-10 /8 1-1/16 1-1/ 1 1/ Delrin 80-106 1/ 1-1/ 1-1/ 1 1/ Ball 80-16 1/ 1-1/ 1-1/ 1 /8 Sintered 00-110 /8 1-1/16 1-3/ 1 /8 Roller 00-10 /8 1-1/16 1-3/ 1 /8 Delrin 00-310 /8-1/16 1-3/ 1 9/3 Delrin 300 6-106 1/ 1-1/ 1-3/ 6 1 1/ Ball 300 6-16 1/ 1-1/ 1-3/ 1 www.jarviscaster.com Toll Free: 800-99-9876

Cushion / Solid Rubber s With Decorative Side Plates up to 0 lbs each Listed by NSF These cushion rubber wheels feature metal decorative side plates that make most any cart or mobile equipment more attractive. Standard Color / Finish: Black or Grey Hardness: 7 (± ) Shore A Scale Temperature Range: -30 F to + 160 F - -G -00 Black / Flat 3 1/ 1 1/ Ball 160 3-1/ - 1/ 1-1/ 3/ 1 1/8 Ball 16-1/ 1-1/ 7/8 1 1/8 Ball 00-1/ 1-1/ 1-1/ Grey / Flat 1 1/8 Ball 16 -G 1/ 1-1/ 7/8 1 1/8 Ball 00 -G 1/ 1-1/ 1-1/ Black / Round 1 1/ Ball 00-00 1/ 1-1/ 1-1/ 6 1 1/ Ball 0 6-00 1/ 1-1/ 1-3/ -00G Grey / Round 1 1/ Ball 00-00G 1/ 1-1/ 1-1/ 6 1 1/ Ball 0 6-00G 1/ 1-1/ 1-3/ -113 Welded Disc s up to 300 lbs each -113P Jarvis welded disc wheels offer designers an attractive alternative for foodservice equipment, medical products, point-of-purchase displays and other institutional applications. These wheels feature a black neoprene rubber tread (consult factory on grey models) and blue polyurethane permanently compressed between two steel discs which are welded together. For improved appearance, the center wheel discs are plated with a durable bright nickel plating. Welded disc rubber wheels are quiet rolling and offer excellent floor protection. Standard Color / Finish: Black, grey or blue tread on bright nickel plated wheel core Rubber Hardness: 7 (± ) Shore A Scale Polyurethane Hardness: 9 (± ) Shore A Scale Temperature Range: -0 F to + 160 F Rubber (180 F Polyurethane) Black Rubber Models 3 1/ 1 1/ Ball 00 3-1/-113 3/8 1-/8 1 1 1/ Ball 00-113 3/8 1-/8 1-1/8 1 1/ Ball 00-113 3/8 1-/8 1-1/ 6 1 1/ Ball 0 6-113 3/ 1-1/ -3/8 Blue Polyurethane Models 3 1/ 1 1/ Ball 0 3-1/-113P 3/8 1-/8 1 1 1/ Ball 7-113P 3/8 1-/8 1-1/8 1 1/ Ball 300-113P 3/8 1-/8 1-1/ 6 1 1/ Ball 300 6-113P 3/ 1-1/ Stainless Steel Discs To order, add SS to suffix of model number (Example: -113GSS). www.jarviscaster.com Toll Free: 800-99-9876 13

Listed by NSF -13GF wheels feature a grey, special modulus TPR (Thermoplastic Rubber) tread permanently bonded to a rugged polyolefin wheel core. These attractive wheels offer superior rolling and maneuvering ease with high performance levels that exceed other tread materials. Thanks to their cushion ride, they are ideally suited for a wide variety of foodservice, healthcare and institutional applications. All wheels are non-marking which reduces unsightly marking and scuffing of floors. They are a good choice for use in wet or damp environments. Standard Color / Finish: Dark grey tread on light grey wheel core Hardness: 6 (± ) Shore A Scale Temperature Range: -0 F to + 180 F 6-0GF -13GD 6-0GD For added capacity and maneuverability, HD wheels offer greater capacity with non-marking floor protection and a resistance to harsh environments and frequent wash cycles. Each Jarvis wheel features a special grey modulus TPR (Thermoplastic Rubber) tread permanently bonded to a rugged polyolefin wheel core. This combination of materials equals a cushion ride over rough or uneven floors. Standard Color / Finish: Dark grey tread on light grey wheel core Hardness: 6 (± ) Shore A Scale Temperature Range: -0 F to + 180 F TPR s up to 3 lbs each Round Models 3 1/ 1 1/ 1 1/ 1 1/ 6 1 1/ Flat Models 3 1/ 1 1/ 1 1/ 1 1/ Round Models Flat Models CONDUCTIVE OPTION Above wheel models optionally available with conductive non-marking grey tread. Consult factory. Ball 3-1/-13GD 3/8 1-/8 1/ Delrin 3-1/-31GD 1/ 1-1/ 1/ Ball 0-13GD 3/8 1-/8 /8 Delrin 0-31GD 1/ 1-1/ /8 Ball 0-13GD 3/8 1-/8 3/ Delrin 0-31GD 1/ 1-1/ 3/ Ball 300 6-13GD 3/8 1-/8 1 Delrin 300 6-31GD 1/ 1-1/ 1 Ball 3-1/-13GF 3/8 1-/8 1/ Delrin 3-1/-31GF 1/ 1-1/ 1/ Ball 300-13GF 3/8 1-/8 /8 Delrin 300-31GF 1/ 1-1/ /8 Ball 3-13GF 3/8 1-/8 3/ Delrin 3-31GF 1/ 1-1/ 3/ HD TPR s up to 67 lbs each 6 8 6 Ball 0 6-0GDB 3/ -3/8 1-3/ Roller 0 6-0GD 3/ -3/8 1-3/ Delrin 0 6-30GD 3/ -3/8 1-3/ Ball 00 8-0GDB 3/ -3/8-1/ Roller 00 8-0GD 3/ -3/8-1/ Delrin 00 8-30GD 3/ -3/8-1/ Roller 30-0GF 3/ -3/8 1-3/8 Delrin 30-30GF 3/ -3/8 1-3/8 Roller 30-1GF 3/ 1-3/8 Delrin 30-31GF 3/ 1-3/8 Roller 37-0GF 3/ -3/8 1-1/ Delrin 37-30GF 3/ -3/8 1-1/ Roller 37 6-1GF 3/ 1-/8 Delrin 37 6-31GF 3/ 1-/8 Roller 600 6-0GF 3/ -3/8 1-3/ Delrin 600 6-30GF 3/ -3/8 1-3/ Roller 00 8-1GF 3/ -1/ Ball 00 8-1GFB 3/ -1/ -1/ 8 Delrin 00 8-31GF 3/ -1/ Roller 67 8-0GF 3/ -3/8-1/ Delrin 67 8-30GF 3/ -3/8-1/ CONDUCTIVE OPTION Above wheel models optionally available with conductive non-marking grey tread. Consult factory. 1 www.jarviscaster.com Toll Free: 800-99-9876

-13RTF unique soft tread wheel handles the heat for autoclave applications s roll quiet and offer a smoother ride compared to traditional high temperature wheels Recommended for use in hospitals, laboratories and cleanrooms -13RTR Corrosion resistant thermoplastics make wheel perfect for washdown and steam clean applications Resilient tread material rejects floor debris compared to many dirt magnet wheels on the market Choice of ball, stainless ball, precision ball and delrin bearings available Hardness: 80 (± ) Shore A Scale Temperature Range: see Elasticity vs Temperature chart at right Heat s up to 3 lbs each Heat Flat 3 1/ 1 1/ Stainless Ball * 3-1/-13RTF 3/8 1-1/8 1-/8 1 1/ Stainless Ball 300* -13RTF 3/8 1-1/8 1-/8 1 1/ Stainless Ball 300* -13RTF 3/8 1-1/8 1-/8 6 1 1/ Stainless Ball 3* 6-13RTF 3/8 1-1/8 1-/8 Heat Round 3 1/ 1 1/ Stainless Ball * 3-1/-13RTR 3/8 1-1/8 1-/8 1 1/ Stainless Ball 300* -13RTR 3/8 1-1/8 1-/8 1 1/ Stainless Ball 300* -13RTR 3/8 1-1/8 1-/8 6 1 1/ Stainless Ball 3* 6-13RTR 3/8 1-1/8 1-/8 Elasticity Vs. Temperature tread width Heat Coming Soon Per 0 lbs each Model Number 7 lbs each 90 lbs each *Maximum load under heat in which the tread will return to its original state. 1 lbs each Less 10 lbs each (Inches 17 lbs each 300 F 80 F 0 F 0 F 00 F 190 F Listed by NSF -13MF New antimicrobial wheel is designed to suppress the growth of microbes including bacteria, mold and fungi Recommended for use in hospitals, laboratories, food service industry and cleanrooms Additive in wheel is approved for use in the medical and food service industry, with the additive being certified by the FDA, EPA and NSF 6-0MF Choice of ball, stainless ball, precision ball and delrin bearings available Hardness: 6 (± ) Shore A Scale Temperature Range: -0 F to 180 F Health s up to 67 lbs each Model Number Less (Inches Health 3 1/ 1 1/ Stainless Ball 3-1/-13MF 3/8 1-1/8 1-/8 1 1/ Stainless Ball 300-13MF 3/8 1-1/8 1-/8 1 1/ Stainless Ball 300-13MF 3/8 1-1/8 1-/8 6 1 1/ Stainless Ball 3 6-13MF 3/8 1-1/8 1-/8 HD Health Roller 30-0MF 3/ -3/8 1-3/16 Roller 37-0MF 3/ -3/8 1-3/16 6 Roller 600 6-0MF 3/ -3/8 1-3/16 8 Roller 67 8-0MF 3/ -3/8 1-3/16 Round tread models available. Change MF to MD Petri dish show the difference in bacterial growth over a seven day incubation period. The additive lasts the life of the wheel for continuous suppression of microbe growth. www.jarviscaster.com Toll Free: 800-99-9876 1

Listed by NSF Polyolefin s up to 900 lbs each -13 Polyolefin wheels are a lightweight, economical, hard tread wheel that withstands hard impacts and abusive conditions. These injection molded thermoplastic models are well suited to a wide variety of institutional and industrial applications. Despite their light weight, their impact strength is superior to hard rubber wheels. Polyolefin wheels are impervious to water, oils, grease, solvents, acids and many chemicals. Standard Color / Finish: black Hardness: 6 (± ) Shore D Scale Temperature Range: -0 F to + 180 F 1 1/ PLain 00-1/-13 1/ 1-1/ 1/ 1/ 1 3/8 Ball 30-1/- 1/ 1-1/ 1/ Plain 00-1/-31 /8 1-1/16 /8 1 13/16 Roller 00-1/-3 3/ 1-1/16 /8 3 1 1/ Plain 0 3-1-1/ 1/ Plain 00 3-31 /8 1-1/16 /8 1 13/16 Roller 00 3-3 3/ 1-1/16 /8 3 1/ 1 1/ Plain 0 3-1/ - 13 1/ 1-1/ 7/8 1 1/ Plain 7-13 1/ 1-1/ 1 Plain 37-1 3/ 1-/8 3/ Roller 37-3/ 1-/8 3/ Plain 00-31 3/ -3/16 3/ Roller 00-3 3/ -3/8 3/ Plain 300-13 3/8 1-1/ 1 1 1/ Ball 300-1 3/8 1-1/ 1 Plain 0-1 3/ 1-/8 1 Roller 0-3/ 1-/8 1 Plain 60-31 3/ -3/16 1-1/8 Roller 60-3 3/ -3/8 1-1/8 1 3/8 Plain 0 6-1-1/ 3/ 6 Delrin 00 6-3 3/ 1 Roller 00 6-3/ 1-7/8 1 Plain 700 6-31 3/ -3/16 1-1/ Roller 700 6-3 3/ -3/8 1-1/ 8 Roller 600 8-3/ 1 Plain 900 8-31 3/ -3/16 1-1/ Roller 900 8-3 3/ -3/8 1-1/ Hi-Temp Resin s up to 600 lbs each -1 NHT 3 1/ 1 1/ Plain 600 3-1/-1 HTN 1/ 1-3/ 1/ Plain 37-1 HT 1/ 1-/8 3/ Plain 0-1 NHT 1/ 1-/8 1 Exclusive blended resin compound is designed to withstand the extreme hightemperatures required by certain industries and applications. These easy rolling wheels will not absorb moisture and offer high load ratings and long service life. In addition, they are resistant to most solvents, salts, alkalines, cooking oils, cleaning chemicals, steam cleaning and water immersion. They are ideally suited for high temperature applications such as bakeries, food processing plants and industrial parts heating operations. Standard Color / Finish: Brown (3 1 / model) Black ( and models) Hardness: 7 (± ) Shore D Scale Temperature Range: (Continuous) -0 F to + 7 F (Intermittent) -0 F to + 7 F 16 www.jarviscaster.com Toll Free: 800-99-9876

-13G -13P For those looking for a brighter, more eyeappealing wheel, Jarvis PolyLoc wheels are a natural choice. These models feature a durable dark blue polyurethane crowned tread mechanically locked to a solid polyolefin wheel core. is molded in, around and through a ribbed wheel core to prevent tread separation when exposed to conditions of water and solvents. These models are equipped with single row precision ball bearings for rolling ease. Built in hub caps are color coordinated to match the wheel tread for a very attractive, yet functional and durable wheel. Standard Color / Finish: Dark blue tread on light grey wheel core Hardness: 9 (± ) Shore A Scale Temperature Range: -30 F to + 180 F 6-0G 6-0P Attractive polyurethane is mechanically locked to grey polyolefin wheel core for lasting performance in demanding applications. The tread will not separate or de-bond under extreme water or liquid conditions, and it offers excellent abrasion resistance. Sealed roller bearings are designed to keep water and contaminants out and lubrication in for long service life. Standard Color / Finish: Dark blue tread on light grey wheel core Hardness: 9 (± ) Shore A Scale Temperature Range: -30 F to + 180 F PolyLoc PolyLoc s up to 30 lbs each Blue Models 3 1/ 1 1/ Ball 0 3-1/-13P 3/8 1-/8 1/ 1 1/ Ball 7-13P 3/8 1-/8 3/ 1 1/ Ball 300-13P 3/8 1-/8 1-1/8 6 1 1/ Ball 30 6-13P 3/8 1-/8 1-1/ 3 1/ 1 1/ 1 1/ Grey Models 1 1 1/ 6 1 1/ 6 8 HD s Ball 0 3-1/-13G 3/8 1-/8 1/ Delrin 0 3-1/-31G 1/ 1-1/ 1/ Ball 7-13G 3/8 1-/8 3/ Delrin 7-31G 1/ 1-1/ 3/ Delrin 160-11G /16 1-1/ 3/ Ball 160-1G /16 1-1/ 3/ Ball 300-13G 3/8 1-/8 1-1/8 Delrin 300-31G 1/ 1-1/ 1-1/8 Ball 30 6-13G 3/8 1-/8 1-1/ Delrin 30 6-31G 1/ 1-1/ 1-1/ up to 1,000 lbs each Blue Models Roller 600-0P 3/ -3/8 1 Roller 00-1P 3/ 1-1/ Roller 70-0P 3/ -3/8 1-1/ Delrin 70-30P 3/ -3/8 1-1/ 6 Roller 600 6-1P 3/ 1-3/ Roller 900 6-0P 3/ -3/8-3/ Delrin 900 6-30P 3/ -3/8-3/ 8 Roller 800 8-1P 3/ -1/ Roller 1,000 8-0P 3/ -3/8-3/ Delrin 1,000 8-30P 3/ -3/8-3/ Grey Models Roller 600-0G 3/ -3/8 1-1/ Delrin 600-30G 3/ -3/8 1-1/ Roller 00-1G 3/ 1-1/ Delrin 00-31G 3/ 1-1/ Roller 700-0G 3/ -3/8 1-1/ Delrin 700-30G 3/ -3/8 1-1/ Roller 600 6-1G 3/ 1-3/ Delrin 600 6-31G 3/ 1-3/ Roller 800 6-0G 3/ -3/8 1-3/ Delrin 800 6-30G 3/ -3/8 1-3/ Roller 800 8-1G 3/ -1/ Ball 800 8-1BG 3/ -1/ -1/ Delrin 800 8-31G 3/ -1/ Roller 1,000 8-0G 3/ -3/8-3/ Delrin 1,000 8-30G 3/ -3/8-3/ Listed by NSF www.jarviscaster.com Toll Free: 800-99-9876 17

Listed by NSF 6- Phenolic wheels are an industrystandard performer with proven service over many decades. These economical wheels are well suited to a wide variety of industrial and commercial uses. Phenolic wheels are constructed of compression molded phenolic resin filled with macerated canvas. They are a hard tread wheel with high load capacity and are resistant to most oils and other chemicals. Phenolic wheels roll easier and more quietly than steel or cast iron, providing greater floor protection. Standard Color / Finish: black Hardness: 90 (± ) Shore D Scale (Rockwell 10E) Temperature Range: - F to + 0 F Phenolic s up to 1,00 lbs each 3 6 Less Plain 600 3-1 1/ 1-/8 1/ Roller 600 3-1 3/ 1-3/16 1-/8 1/ 1 13/16 Roller 700 3-9/16 1-1/8 1-1/16 3/ 8 Plain 600-1 1/ 1-/8 1 Roller 600-1 3/ 1-3/16 1-/8 1 Plain 800-1 3/ 3/ -3/16 1-1/ Roller 800-3/ 1-3/16-3/8 1-1/ Plain 600-1 1/ 1-/8 1-1/ Roller 600-1 3/ 1-3/16 1-/8 1-1/ Plain 1,000-1 3/ 3/ -3/16 1-3/ Roller 1,000-3/ 1-3/16-3/8 1-3/ Plain 800 6-1 1/ 1-/8 1-1/ Roller 800 6-1 3/ 1-3/16 1-/8 1-1/ Plain 1,00 6-1 3/ 3/ -3/16-1/ Roller 1,00 6-3/ 1-3/16-3/8-1/ Plain 1,00 8-1 3/ 3/ -3/16 Roller 1,00 8-3/ 1-3/16-3/8 Hi-Temp Phenolic s up to 1,00 lbs each 8-HT With a maximum operating temperature range of + F (intermittent service), these durable wheels are designed to perform in conditions that will destroy ordinary caster wheels. Their high load capacity enables them to move heavy loads under extreme heat conditions. All Jarvis high-temp Phenolic wheels are equipped with stainless steel roller bearings with stainless steel raceways for maximum service life and rolling ease. Standard Color / Finish: brown Hardness: 90 (± ) Shore D Scale (Rockwell 10E) 6 8 Less Plain 600-11HT 1/ 1-/8 1/ Stainless Steel Roller 800 -HT 3/ 1-3/16-3/8 Plain 600-11HT 1/ 1-/8 1/ Stainless Steel Roller 1,000 -HT 3/ 1-3/16-3/8-1/ Stainless Steel Roller Stainless Steel Roller Temperature Range: - F to + 7 F (Continuous operation) - F to + F (Intermittent service) Consult factory. 1,00 6-HT 3/ 1-3/16-3/8 3 1,00 8-HT 3/ 1-3/16-3/8 3-1/ 18 www.jarviscaster.com Toll Free: 800-99-9876

Bumpers Listed by NSF B-3-1/ R (Round Stem) 71-00 (Grey) 71-01 (Black) B-3-1/ S (Square Stem) End Bumper B-1 Tubing Bumper B-3-1/ Rolling Bumper B- Grey or black end bumper generally used on the ends of tubular handles on carts and platform trucks. Designed to help protect equipment as well as walls and door facings. Bumper Dimensions: 3-1/ diameter with steel insert for /16 mounting bolt. Designed to fit over 1 OD round or square tubing on carts and a variety of rolling equipment. Please specify round or square tubing when ordering. Specify B-3-1/ R for round ID and B-3-1/ S for square ID. diameter rolling bumper; tapered grey rubber bonded to zinc plated insert with removable center bushings to fit stem diameters from 3/8 to 1-1/8. Specify bumper B-. 718-00 (Grey) 719-00 (Black) 70-01 (Grey) 71-01 (Black) 7-01 (Grey) 7-01 (Black) Corner Bumper B-8 Corner Bumper B-10 Corner Bumper B-1 Grey or black corner bumper for mounting on the corners of equipment, carts or any flat surfaces. Absorbs shock to protect equipment and walls, doors and furniture. Bumper Dimensions: 7/8 thick x 1 high x -/8 long from inside corner on each side. Adjustable Equipment Legs A heavy duty bumper with reinforced, rounded corner to protect equipment from shocks and bumps. Steel inserts inside bumper assures permanent mounting to equipment. Ends are tapered and rounded for added design appeal. Bumper Dimensions: 1 thick x 1-1/16 high x 3-1/16 long from inside corner on each side. Mounting holes are 13/6 diameter. A common bumper used to protect a wide variety of mobile equipment and the surrounding environment from bumps and scrapes. This bumper is equipped with steel inserts and can be mounted on any flat surface. The ends of the bumper legs may be cut at notched area to make square ends. Bumper features steel inserts. Bumper Dimensions: 7/8 thick x 1 high x 3-1/8 long from inside corner on each side. Grey bumper with no steel insert, order model number 7-30. With almost a century of providing to the food service industry, it only makes sense that Jarvis is able to utilize its global resources in advanced manufacturing technologies to develop additional solutions for our customers. Welded mounting plates available in two sizes Integral hex foot Available in multiple finishes Adjustments up to 1 in length Engineered solutions for custom applications Available in, 6 and 8 heights Construction: 16 gauge steel tubing O.D. Tubing: 1-/8 Hex Foot: 1-1/8 Load : 000 lb static load Leg Model Number Overall Extended Height Top Plate Dimensions Bolt Hole Spacing Mounting Bolt Size LEG- -3/8 x 3-/8 1-3/ x 3 /16 LEG-7 3-1/ x 3-1/ -/8 x -/8 9/3 6 LEG6-7 -3/8 x 3-/8 1-3/ x 3 /16 6 LEG6-7 7 3-1/ x 3-1/ -/8 x -/8 9/3 19

Jarvis Caster Company 881 Lower Brownsville Road Jackson, TN 38301 Phone: 800-99-9876 Fax: 800-9-7188 info@jarviscaster.com www.jarviscaster.com All specifications and dimensions are accurate for present manufacture but subject to change without notice. 011 Jarvis Caster Company