Roller-Compacted Concrete: Highway/Street Applications



Similar documents
Pavement Thickness. esign and RCC-Pave Software. Roller-Compacted Concrete Pavement: Design and Construction. October 24, 2006 Atlanta, Georgia

Design and Construction of Roller-Compacted Concrete Pavements for Container Terminals. David R. Luhr PhD PE *

SECTION 311 PLACEMENT AND CONSTRUCTION OF CEMENT TREATED SUBGRADESOIL CEMENT BASE COURSE

Chapter 7: Pavement Rehabilitation 7-1 Asphalt Pavement Overlays 7-1 Surface Preparation Methods 7-2 Concrete Pavement Preparation 7-3 Recycling

Advancements in Permeable Pavements

SPECIFICATIONS. INTERLOCKING CONCRETE POROUS PAVING UNITS or Permeable Interlocking Concrete Pavers (PICP)

STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENTAL SPECIFICATION 888 PORTLAND CEMENT CONCRETE PAVEMENT USING QC/QA.

Example Specification for Concrete using Current Building Code Requirements

Quality Assurance Concepts. Outline

PROPERTIES AND MIX DESIGNATIONS

C. Section TESTING LABORATORY SERVICE.

GRADATION OF AGGREGATE FOR CONCRETE BLOCK

DIVISION 300 BASES SECTION 304 AGGREGATE BASE COURSE DESCRIPTION MATERIALS CONSTRUCTION REQUIREMENTS

NOTE: FOR PROJECTS REQUIRING CONTRACTOR MIX DESIGN, THE DESIGN PROCEDURES ARE SPECIFIED IN THE SPECIAL PROVISIONS OF THE CONTRACT.

SPECIAL NOTE FOR ASPHALT WATERPROOFING MIX FOR BRIDGE-DECK OVERLAYS AND ADJACENT APPROACHES

CW 3110 SUB-GRADE, SUB-BASE AND BASE COURSE CONSTRUCTION TABLE OF CONTENTS

SPECIFICATION FOR CONSTRUCTION OF UNBOUND GRANULAR PAVEMENT LAYERS

Cement-Based Pavement Solutions. Full Depth Reclamation with Cement A Useful and Cost Saving Tool

SECTION 55 PIPE FOR STORM DRAINS AND CULVERTS (FAA D-701)

738-B-297 POLYMERIC CONCRETE BRIDGE DECK OVERLAY. (Adopted )

4-02 Gravel Base Ballast and Crushed Surfacing

SECTION 36 - CAST-IN-PLACE CONCRETE PIPE (CIPCP) TABLE OF CONTENTS

Recycled Concrete Pavement and Other Recycled Materials in Concrete Pavements

APPENDIX B. I. Background Information

These recommendations generally follow the Construction Specifications Institute (CSI) Master Format.

CLASS II BASE COURSE - Section 302

The AASHO Road Test site (which eventually became part of I-80) at Ottawa, Illinois, was typical of northern climates (see Table 1).

Guidelines for Durable Driveways, Carports Patios, Walks, Garage Floors

Section 300 Base Courses

Nevada DOT Cold In-Place Recycling Federal Highway Administration National Review Close out meeting, August 25, 2005

Specification Guidelines: Allan Block Modular Retaining Wall Systems

Rehabilitation Strategies for Bonded Concrete Overlays of Asphalt Pavements

Stabilization of Soil with Self-Cementing Coal Ashes

Cementitious Stabilization

Reflectex TM Reflective Concrete Interlayer Geotextile INSTALLATION GUIDELINES

Lab 1 Concrete Proportioning, Mixing, and Testing

Construction Specifications for Keyhole Pavement Coring and Reinstatement

Porous Pavement Alternatives Cost Analysis

Manufacturing Quality Concrete Products

INTRODUCTION TO CONCRETE PAVEMENTS

Division 2 Section Section 02795

SECTION 18 - CAST IN PLACE HIGH PERFORMANCE CONCRETE (HPC)

SECTION PERMEABLE INTERLOCKING CONCRETE PAVEMENT (1995 MasterFormat Section 02795)

Shotcrete Quality Control and Testing for an Underground Mine in Canada

Construction of Quality Hot Mix Asphalt Pavements

SECTION PERMEABLE INTERLOCKING CONCRETE PAVEMENT

Use of Marginal Materials & Fly ash in Road Works

Fly Ash Slurry Injection (FASI) of Bituminous Thermal Cracks

SECTION UNI PERMEABLE INTERLOCKING CONCRETE PAVEMENT

Preservation, Repair and Rehabilitation of Concrete Bridges, Pavements and Tunnels in Virginia

NAPCA BULLETIN APPLICATION PROCEDURES FOR CONCRETE WEIGHT COATING APPLIED BY THE COMPRESSION METHOD TO STEEL PIPE

Joint Rehabilitation. Driving Forces for Concrete Pavement Joint Repairs

SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION CONCRETE BONDING COMPOUND.

Tremie Concrete CM 420 CM 420 CM 420 CM 420. Temporary Structures. Tremie Concrete

1.5 Concrete (Part I)

CORROSION ENGINEERING RESIN-BASED POLYMER CONCRETES AND GROUTS

Construction Specification for Concrete Curb and Concrete Curb and Gutter

cement Masonry Cement Engineered for quality and reliability, Lafarge cements for masonry deliver consistent performance. page 2 Lafarge Cement

SPECIFICATIONS FOR PRECAST MODULAR BLOCK RETAINING WALL SYSTEM (revised 11/5/13)

Chapter 8 Design of Concrete Mixes

SECTION PERVIOUS INTERLOCKING CERAMIC PAVERS

INDEX DESCRIPTION MATERIALS APPROVAL OF SUBBASE COURSE CONSTRUCTION MEASUREMENT PAYMENT 6

SECTION PERMEABLE INTERLOCKING CONCRETE PAVEMENT (1995 MasterFormat Section 02795)

Civil. 2. City of Seattle Supplement to the Specification for Road, Bridge and Municipal Construction, most current addition.

CHAPTER 4 CONCRETE TRAINING AND QUALIFICATIONPROGRAM

NorthEast Transportation Training and Certification Program (NETTCP) Course Registration Form

Ohio Department of Transportation Division of Production Management Office of Geotechnical Engineering. Geotechnical Bulletin PLAN SUBGRADES

Proper use of the Rebound Hammer Updated to reflect the changes to ASTM C805

Caltrans non-standard Special Provisions Pervious Concrete. David Akers Feb 28, 2012

ROAD CONSTRUCTION. Pavement Base Reinforcement Subgrade Stabilization

STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENTAL SPECIFICATION 848 BRIDGE DECK REPAIR AND OVERLAY WITH CONCRETE USING HYDRO-DEMOLITION

Installation PowerPoint for Grasscrete Formers

STANDARD SPECIFICATIONS SECTION PRECAST REINFORCED CONCRETE MANHOLES AND MANHOLE BASES. 1. Structure Earthwork: 02200

State of Illinois Department Of Transportation CONSTRUCTION INSPECTOR S CHECKLIST FOR STORM SEWERS

Pavement Patching Repair for AC and PCC Pavement Surfaces. Vern Thompson

SELECTING REHABILITATION STRATEGIES FOR FLEXIBLE PAVEMENTS IN TEXAS. Andrew J. Wimsatt, Ph.D., P.E. Fort Worth District Pavement Engineer

CID STREET INFRASTRUCTURE ASSESSMENT

Summary of FHWA In-Place Recycling Activities

E-learning tools for understanding and testing of a range of concrete properties

Standards for Specifying Construction Of Airports

Florida s Experience with Crumb Rubber

High-Speed Nondestructive Testing and Intelligent Construction Systems

SECTION III-06 Surfacing Page 1 Revised 3/2/10. See the DESIGN GUIDELINES in Section I-06 for requirements for cross slope of the roadway.

Guide for Design and Construction of New Jointed Plain Concrete Pavements (JPCPs)

MeltonStone Cast Stone Product Specifications

Strength of Concrete

SECTION 4Aggegate Subbase

Properties of Fresh Concrete

Grinding equipment that causes raveling, aggregate fractures or disturbance to the joints shall not be permitted.

Chapter 2 Basis of design and materials

SCG / SELF CONSOLIDATING GROUT

40-9 PERMEABLE INTERLOCKING CONCRETE PAVEMENT

Material and methods. Värmeforsk report Niklas Hansson DIANAS utilization of waste inciniration bottom ash in bound construction materials

SECTION UNIT PAVERS. Logo Display hidden notes to specifier by using Tools / Options / View / Hidden Text.

Pavement Rehabilitation Using Hot Mix Asphalt. - National Perspective -

1. ASTM C Sampling and Testing Concrete Masonry Units 2. ASTM C 1372 Standard Specification for Dry-Cast Segmental Retaining Wall Units

PTS HELICAL PIERS INSTALLATION SPECIFICATIONS NOTICE

THE DETERMINATION OF THE MAXIMUM DRY DENSITY AND OPTIMUM MOISTURE CONTENT OF MATERIALS USING THE VIBRATORY HAMMER COMPACTION

Transcription:

Roller-Compacted Concrete: Highway/Street Applications 2009 Louisiana Transportation Conference Tim McConnell Portland Cement Association

Definition Roller-Compacted Concrete (RCC) is a no-slump concrete that is compacted by vibratory rollers. Zero slump (consistency of damp gravel) No forms No reinforcing steel No finishing Consolidated with vibratory rollers Concrete pavement placed in a different way!

Why Use RCC for Pavements? Low cost Easy preparation High-volume production Minimal labor High strength and durability Proven performance Environmental benefits

Engineering Properties Compressive strength 4,000 to 10,000 psi Flexural strength 500 to 1,000 psi Modulus of Elasticity 3,000,000 to 5,500,000 psi

Mixture Design Differs from conventional concrete! Not air-entrained Lower water content Lower paste content Larger fine aggregate content Nominal max. size aggregate 5/8 in???

Proportioning Methods Several methods available: Concrete consistency tests Soil compaction methods Optimal paste volume method Solid suspensions model Always allow time and money for field trial

Aggregate Selection Highway base course, asphalt or concrete aggregates can be used 5/8 in. NMSA??? Provides smooth surface, reduces segregation Higher fine aggregate content than conventional Economic advantage using non-washed and pit-run aggregates including dense graded aggregate base Provide adequate stability under vibratory roller 2%-8% passing #200 sieve Supplements paste to fill voids and maintain tight surface

Proportioning of RCC

Soil Compaction Method Select cementitious materials Portland cement: Type I or II (C150 or C1157) Blended cement: (C595 or C1157) Fly Ash (C618), Slag (C989) or silica fume (C1240) Normally 400-600 lb/cy total cementitious (12% to 17% of dry weight) If used, fly ash proportions typically 15% to 25%; silica fume typically 5% to 10%

Soil Compaction Method Determine moisture content Construct moisture/density curve ASTM C1435- electric vibrating hammer Assume a median cement content (500 pcy)

Moisture-Density Relationship

Soil Compaction Method Determine cementitious materials content Use optimum moisture content Run cement series e.g., 11%, 13%, 15%, 17% Select cement content which yields appropriate strength

ASTM C1435

Strength vs. Cement Content 725 697 667 636 603 569

Construction

Placing Equipment-construction Conventional Asphalt Pavers Provides some initial density (80%- 85%) Relatively smooth surface May require modification Increased cleaning and maintenance

Placing Equipment Spreaders Jersey spreader Truck Dumped Motor grader/dozer Low initial compaction Not as smooth as when placed using paving equipment Excellent for lowspeed traffic

Paving Train of HD paver Material Transfer Device Truck Paver

Compaction Initial compaction provided by paver Proper final density is critical for both strength and durability Compact to 98% of modified Proctor Compaction equipment is at discretion of the contractor Vibratory roller Non-vibratory steel wheel roller Rubber-tire roller

Concrete Curing Compound Can apply standard white-pigmented concrete curing compounds Apply 1-1/2 to 2 times rate for conventional concrete Do not use if asphalt cap to be placed

Natural Cracks Most economical 30 to 80 ft spacing Often first cracks appear within 24 hours Narrow crack widths Seal if > 1/8-inch Best load transfer Minimal raveling

Saw-Cut Joints More aesthetically pleasing Early entry saws very effective, shortly following placement Need to saw within 12 hours to avoid uncontrolled cracking 1/3 to 1/4 of total layer thickness

Traditional RCC Paving Projects Low-speed vehicles Industrial sites Large and unrestricted paving areas

Shoulders of 6 and 8 RCC I-285 Georgia First Highway Application

Columbus, Ohio

Access Provided Directly Behind the ABG Paver (Prior to Roller Compaction) Huge advantage in urban areas!

What s next?

SCDOT- US78 Ladson, SC 41,700 AADT 10% Trucks 1 mile length Rutting, shoving, fatigue!

2 Asphalt Surface 10 Roller Compacted Concrete RCC- $39.40 yd 2

Integrated Pavement Solution Roller Compacted Concrete Full-depth Reclamation

Palmetto Landfill

FDR with cement performed 12 inches deep Aggregate and asphalt of varying depths

8 inches of RCC paved within 24 hours of FDR Entire 500 foot section completed over weekend Temperatures around freezing at night

for additional information, please visit our website at www.cement.org/pavements

Thank You! wmcconnell@cement.org