Certificate of Mold Analysis



Similar documents
Certificate of Mold Analysis

EXPANDED FUNGAL REPORT

EXPANDED FUNGAL REPORT

Axium Inspections, LLC Wade Williamson th Street, Ste.3000 Denver, CO USA (303)

Tuula Putus, M.D. Professor in Occupational Health Care and Occupational Medicine, University of Turku, Finland

Biological Contamination in the HVAC System

Mold Questions and Answers Questions and Answers on Stachybotrys chartarum and other molds

SanAir Technologies Laboratory. Analysis Report. American Environmental Specialists, LLC

OSMA, Inc. 300 SW 74 Terrace Plantation, FL (754)

Control Mold Through Water Activity Prevent Mold Growth on Building Materials

November 9, Wake County Public Schools Department of Environmental Health & Safety 1551 Rock Quarry Road Raleigh, NC

Mold Inspection Report (Initial Assessment)

The effect of Katrina in the Gulf Coast: A study in Mold Proliferation

Stachybotrys chartarum a mold that may be found in water-damaged homes

MOLD INVESTIGATION REPORT

IAQ - indoor ventilation Air contaminants Molds Requirements for growth Health effects Mold prevention - moisture EH&S mold checks & removal

Prestige EnviroMicrobiology, Inc.

Laboratory Analysis Report Aerobiology Spore Trap Assay

North Butler CSD. Mold Survey North Butler Elementary. Allison, Iowa

WATER DAMAGE, MOLD* GROWTH AND IAQ

How To Interpret Laboratory Results for Airborne Fungal (Mould) Samples

What to do when bad things happen to good homes.

Mould Mould A Basic Guide

Cadmus Environmental Mold Inspection Report. Mold Inspection Report Example Page 1 of 12

Mold, Mildew, Fungi What s the Difference? Mold: The Good, the Bad and the Ugly

Mold. Guidelines for New Jersey Residents. Understanding Mold Investigations & Remediation

Carson Dorn, Inc. December 18, Patrick Holmes Associate Manager Juneau I, LLC 645 G Street, Suite Anchorage, AK Dear Mr.

WHAT DO FUNGAL PCR RESULTS MEAN?

MOLD BASICS Kathleen Parrott, Ph.D. Professor of Housing, Virginia Tech

DATE: December 11, TO: Pete Taggart, Principal. SUBJECT: McKamy MS - IAQ - Initial Contact - Room 1115 & Technology Data Room

Final Inspection Report

How To Perform A Mold And Indoor Air Quality Assessment

University of Vermont

LUMBERYARD MOLD IN NEW CONSTRUCTION AND ITS COMPLEXITIES

DESERT RESEARCH INSTITUTE MOLD ASSESSMENT AND REMEDIATEION PROCEDURE

Comparison of Analytical Methods for Evaluating Mold in Carpet Dust

Liabilities of Vented Crawl Spaces, Their Impacts on Indoor Air Quality in Southeastern U.S. Homes and One Intervention Strategy

Mold and Mildew Mold and mildew can be detected by sight, smell and touch.

Mold a a growing problem

Fungal Assessment. Smith Recreation Community Centre 1019 Hwy 2A, Smith, Alberta

outside air also attach themselves to people and animals, making clothing, shoes, bags, and pets convenient vehicles for carrying mold indoors (3).

December 24, SEDA Construction Attn: Ted Walker 2120 Corporate Square Boulevard Jacksonville, Florida 32216

Mold Management Plan Operations & Maintenance

Mold and mold spores

Course Agenda. Mold in Commercial Buildings: Overview of Mold Contamination in Buildings. Overview of Mold Contamination in Buildings

Mold Inspection Report

Molds at School. 2002,

CITY OF LOS ANGELES GUIDELINES FOR ASSESSMENT AND REMEDIATION OF MOLD

Arbor Heights Indoor Air Quality Investigation Interim Report

NYU Safety Policy Manual

McGregor Pearce, MPH Mold Sampling and Diagnostic Service Indoor Air Quality Investigations Mold Biology

The Facts About Mold. Operation Outreach

KEY ELEMENTS IN PREVENTING AND MITIGATING MOLD CLAIMS

M OLD: CAUSE, EFFECT AND RESPONSE

Envirotest Research Inc NE 200 th St. Suite 100 Shoreline, WA Fax:

How To Perform A Mold Inspection

Liabilities of Vented Crawl Spaces And Their Impacts on Indoor Air Quality in Southeastern U.S. Homes

Moisture Management. Infection Prevention and Corporate Safety. Contents. Posttest... 12

STANDARD OPERATING PROCEDURES FOR MOLD REMEDIATION


CLEANING CONTENTS FROM MOLD-CONTAMINATED ENVIRONMENTS

New Protocol for the Assessment and Remediation of Indoor Mold Growth

Case Studies of the Cause and Origin of Fungal Growth in Residential and Commercial Structures

MOLD INFORMATION GUIDE

Mold Information Sheet

Mold Response and Remediation Plan

MOLD RESPONSE AND REMEDIATION PLAN

9/16/2014. Michelle Peninger, BSMT, CIC Inova Health System

Mold In Your Home and at Work

Response to Water Intrusion and Mold/Microbial Growth

Safety Policy Manual Policy No. 112

Nick s Inspection Services

Mold Remediation in Occupied Homes

City of Philadelphia Mold Remediation, Water Damage and Use of Biocides

WATER INFILTRATION INTO BUILDINGS: Part 1: Mold in Buildings General Information

IUB Water Damage Restoration Guideline

How To Prevent And Manage A Flood And Mold

OSHA Policies Regarding Mold. Fred Malaby, CIH, CSP Industrial Hygienist NEAIHA/NECOEM Meeting, September 28, 2007

Mold and Water Damage

MOLD FAQs. 1. What is mold and where does it live? 2. How can mold affect my health?

Specifications for Removal and Replacement of Water Damaged/Mold Impacted Materials

MOLD INSPECTION REPORT. UCD Anschutz Medical Campus Building E. 19 th Ave. Aurora, CO 80045

The Collection and Interpretation of Wall Cavity Samples

Transcription:

CHICAGO INSPECTION AGENCY 815 N SCHOOL ST PROSPECT HEIGHTS, IL 60070 Certificate of Mold Analysis Prepared for: CHICAGO INSPECTION AGENCY Phone Number: (847) 459-9387 Fax Number: (847) 459-9443 Project Name: Test Location: 570 HELEN DR NORTHBROOK, IL 60062 Chain of Custody #: 748714 Received Date: April 29, 2014 Report Date: April 30, 2014 Erika Piechowski, Technical Manager Carlos Ochoa, Quality Control Manager Currently there are no Federal regulations for evaluating potential health effects of fungal contamination and remediation. This information is subject to change as more information regarding fungal contaminants becomes available. For more information visit http://www.epa.gov/mold or www.nyc.gov/html/doh/html/epi/mold.shtml. This document was designed to follow currently known industry guidelines for the interpretation of microbial sampling, analysis, and remediation. Since interpretation of mold analysis reports is a scientific work in progress, it may as such be changed at any time without notice. The client is solely responsible for the use or interpretation. PRO-LAB/SSPTM Inc. makes no express or implied warranties as to health of a property from only the samples sent to their laboratory for analysis. The Client is hereby notified that due to the subjective nature of fungal analysis and the mold growth process, laboratory samples can and do change over time relative to the originally sampled material. PRO-LAB/SSPTM Inc. reserves the right to properly dispose of all samples after the testing of such samples are sufficiently completed or after a 7 day period, whichever is greater. For more information please contact PRO-LAB at (954) 384-4446 or email info@prolabinc.com Page 1 of 6

0 Prepared for : CHICAGO INSPECTION AGENCY Test Address : IDENTIFICATION 570 HELEN DR NORTHBROOK, IL 60062 ANALYSIS METHOD Spore trap analysis Spore trap analysis Spore trap analysis Spore trap analysis LOCATION OUTSIDE @ FRT. BSMT @ OFFICE BSMT @ LNDRY. BDRM. COC / LINE # 748714-1 748714-2 748714-3 748714-4 SAMPLE TYPE & VOLUME Z5-25L Z5-25L Z5-25L Z5-25L SERIAL NUMBER Q140631 Q119729 Q119703 Q140710 COLLECTION DATE Apr 27, 2014 Apr 27, 2014 Apr 27, 2014 Apr 27, 2014 ANALYSIS DATE Apr 30, 2014 Apr 30, 2014 Apr 30, 2014 Apr 30, 2014 CONCLUSION CONTROL NOT ELEVATED NOT ELEVATED NOT ELEVATED Chaetomium 1 40 7 Cladosporium 1 40 3 3 120 16 Other Basidiospores 2 15 2 7 1 40 5 Penicillium/Aspergillus 11 440 85 13 520 93 28 1,100 90 15 600 79 TOTAL SPORES 13 520 100 14 560 100 31 1,220 100 19 760 100 MINIMUM DETECTION LIMIT * 1 40 1 40 1 40 1 40 BACKGROUND DEBRIS Light Light Moderate Light Cellulose Fiber 5 200 4 160 6 240 Fiberglass 3 120 2 Plant Fragments 1 40 1 40 Pollen 5 200 OBSERVATIONS & COMMENTS Background debris qualitatively estimates the amount of particles that are not pollen or spores and directly affects the accuracy of the spore counts. The categories of Light, Moderate, Heavy and Too Heavy for Accurate, are used to indicate the amount of deposited debris. Increasing amounts of debris will obscure small spores and can prevent spores from impacting onto the slide. The actual number of spores present in the sample is likely higher than reported if the debris estimate is Heavy or Too Heavy for Accurate. All calculations are rounded to two significant figures and therefore, the total percentage of spore numbers may not equal 100%. * Minimum Detection Limit. Based on the volume of air sampled, this is the lowest number of spores that can be detected and is an estimate of the lowest concentration of spores that can be read in the sample. NA = Not Applicable. that were observed from the samples submitted are listed on this report. If a spore is not listed on this report it was not observed in the samples submitted. Interpretation Guidelines: A determination is added to the report to help users interpret the mold analysis results. A mold report is only one aspect of an indoor air quality investigation. The most important aspect of mold growth in a living space is the availability of water. Without a source of water, mold generally will not become a problem in buildings. These determinations are in no way meant to imply any health outcomes or financial decisions based solely on this report. For questions relating to medical conditions you should consult an occupational or environmental health physician or professional. CONTROL is a baseline sample showing what the spore count and diversity is at the time of sampling. The control sample(s) is usually collected outside of the structure being tested and used to determine if this sample(s) is similar in diversity and abundance to the inside sample(s). ELEVATED means that the amount and/or diversity of spores, as compared to the control sample(s), and other samples in our database, are higher than expected. This can indicate that fungi have grown because of a water leak or water intrusion. Fungi that are considered to be indicators of water damage include, but are not limited to: Chaetomium, Fusarium, Memnoniella, Stachybotrys, Scopulariopsis, Ulocladium. NOT ELEVATED means that the amount and/or the diversity of spores, as compared to the control sample and other samples in our database, are lower than expected and may indicate no problematic fungal growth. UNUSUAL means that the presence of current or former growth was observed in the analyzed sample. An abundance of spores are present, and/or growth structures including hyphae and/or fruiting bodies are present and associated with one or more of the types of mold/fungi identified in the analyzed sample. NORMAL means that no presence of current or former growth was observed in the analyzed sample. If spores are recorded they are normally what is in the air and have settled on the surface(s) tested. Page 2 of 6

Chain of Custody # 748714 Bsmt @ Office Outside @ Frt. 440 Penic illium /As pergillus 520 Other Basidiospores Chaetom ium 40 1 10 100 1000 per cubic meter Page 3 of 6

Chain of Custody # 748714 Bsmt @ Lndry. Outside @ Frt. 440 Penic illium /As pergillus 1100 Other Basidiospores Clados porium 40 1 10 100 1000 10000 per cubic meter Page 4 of 6

Chain of Custody # 748714 Bdrm. Outside @ Frt. 440 Penic illium /As pergillus 600 Other Basidiospores 40 Clados porium 120 1 10 100 1000 per cubic meter Page 5 of 6

Identification Outdoor Habitat Indoor Habitat Possible Allergic Potential Not an opinion or interpretation Chaetomium Cladosporium Basidiospores Penicillium/Aspergillus Growing on dung, dead leaves, wood. The most common spore type reported in the air worldwide. Found on dead and dying plant litter, and soil. Commonly found everywhere, especially in the late summer and fall. These spores are from Mushrooms. Common everywhere. Normally found in the air in small amounts in outdoor air. Grows on nearly everything. Cellulose substrates, especially wallboard, cardboard and wood. Not normally seen growing indoors unless the building material has been wetted. Unusual / Not Normal to be growing indoors. Commonly found on wood and wallboard. Commonly grows on window sills, textiles and foods. Mushrooms are not normally found growing indoors, but can grow on wet lumber, especially in crawlspaces. Sometimes mushrooms can be seen growing in flower pots indoors. Wetted wallboard, wood, food, leather, etc. Able to grow on many substrates indoors. Type I (hay fever and asthma) allergies. Type I (hay fever and asthma), Type III (hypersensitivity pneumonitis) allergies. Some allergenicity reported. Type I (hay fever, asthma) and Type III (hypersensitivity pneumonitis). Type I (hay fever and asthma) allergies and Type III (hypersensitivity pneumonitis) allergies. Comments Chaetomium is a water-indicating mold. of this type of mold should not be observed in significantly higher numbers in the air above background/control. If growth and/or significantly higher than backgroud/control spore numbers are reported, corrective action should be considered to reduce the source of water, moisture levels and/or spore numbers in the living space. A very common and important allergen source both outdoors and indoors. Among the group of Mushrooms (Basidiomycetes) are dry rot fungi Serpula and Poria that are particularly destructive to buildings. This is a combination group of Penicillium and Aspergillus and is used when only the spores are seen. The spores are so similar that they cannot be reliably separated into their respective genera. Page 6 of 6