Volvo PENTA CHEMICALS 2013
Product use : [1] VOlVO PENTA ChEMiCAls Welcome to the Volvo Penta Catalogue for Chemical Products. In this catalogue, Volvo Penta offers a wide range of chemical products for both domestic and workshop use. All handling of chemicals entails health and environmental risk, however. For this reason we have put together a range of tested products in this catalogue which minimize these risks and at the same time secure outstanding performance. We have enlisted the help of the Volvo organization and our own materials laboratory, who have a considerable fund of knowledge about evaluating product risks and their affects on other materials. The range of products in this catalogue is continually being improved, since we always attempt to offer the best performing products which are best for environmental care and health. Everything combines to be as kind as possible to people and the environment. You can obtain information about composition, personal and environmental risks and protective measures as well as how to dispose of waste products is available from each importer. Volvo safety data sheets can be found on homepage at: www.volvo.com/sds SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/ UNDERTAKING 1.1 Product identifier Product name : Engine Oil VDS-3 15W40 4 Product no. : 3840002 Engine Oil VDS-3 15W40 3840002 Date of issue : 2011-06-17. Version : 1 1.2 Relevant identified uses of the substance or mixture and uses advised against Waste chemicals should be handled as environmentally hazardous waste. They may contain substances that cause cancer and impurities such as lead, nickel and copper. Ensure that waste chemicals is disposed of responsibly and according to the local regulations. 1.3 Details of the supplier of the safety data sheet Supplier : AB Volvo Penta SE 405 08 Gothenburg Sweden 1.4 Emergency telephone number Emergency phone : +46-31-66 67 50 (during office hours) 2. HAZARDS IDENTIFICATION Telephone no.: : +46-31-66 67 50 E-mail address : sds@volvo.com 2.1 Classification of the substance or mixture Product definition : Mixture Classification according to Directive 1999/45/EC [DPD] The product is not classified as dangerous according to Directive 1999/45/EC and its amendments. Classification : Not classified. See section 11 for toxicological information and section 12 for ecotoxicological information. See Section 16 for the full text of the R phrases or H statements declared above. 2.2 Label elements Risk phrases : This product is not classified according to EU legislation. Safety phrases : Not applicable. Supplemental label : Safety data sheet available for professional user on request. elements Keep out of the reach of children. If ingested, do not induce vomiting. Seek medical advice 2.3 Other hazards Other hazards which do not : Not available. result in classification immediately. Minimise skin contact. Protect the environment. Dispose of used oil at designated sites. Do not mix used oil with solvents, brake fluids or coolants. For more detailed information about field of application, see service bulletin/service information and operators manual. Type 3. COMPOSITION/INFORMATION ON INGREDIENTS Substance/mixture : Mixture Classification Ingredient name Identifiers % 67/548/EEC Regulation (EC) No. 1272/ Type 2008 [CLP] Mineral Oil, Solvent - 60-100 Not classified. Not classified. [2] refined Zinc EC: 272-028-3 <2.5 Xi; R41, R38 Skin Irrit. 2, H315 Dialkyldithiophosphate CAS: 68649-42-3 N; R51/53 Eye Dam. 1, H318 Aquatic Chronic 2, H411 See section 16 for the See Section 16 for the full text of the R-phrases full text of the H declared above There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section. statements declared above. Date of issue : 2011-06-17. 1/6 reservation: because the products in this catalog are modified constantly we reserve the right to make changes to product lines. Some products are not sold in all markets. Please check availability with your sales office. 2
CONTENT OILS Choose the correct oil 4 Suggestions and advice engine oil 5 Oil Analysis 5 Engine Oil 6 Hydraulic Oil 7 Transmission Oil 7 COOLANT Coolants 8 Coolant Yellow 9 Coolant Green 9 LUBRICANTS Grease 10 PAINT Touch-up paint 14 SEALANT Sealants 16 LOCKING FLUID Glue 18 MISC. Anti-rust agent 19 Yellow marking paint 19 Cleaning agent 19 Urea solution 19 Explanations 20 3
VOLVO PENTA OILS Choose the correct oil We offer a perfectly matched range of lubricants for Volvo Penta engines and other diesel and gas-powered engines. Oil quality that meets Volvo Penta design requirements. Packs which meet the needs of both end-users and dealers. Volvo Penta has produced a wide range of lubricants developed specifically for Volvo Penta Engines. The range covers both end-user requirements for topping-up between services and also dealer needs for larger packs. Lubricating oil Volvo Penta makes significant investments in the development of all its products, and lubricants are no exception. They are designed and tailored to meet our engines requirements to guarantee that components work together in perfect harmony. Selecting the best combination of lubricants for an engine guarantees top performance and enhanced efficiency while also reducing wear and fuel consumption, which means a more sustainable, productive engine. During the design stage great emphasis is placed on maximizing stability and optimizing service intervals so that operating hours can be exploited to the full in both the short and long terms. SECURED TOP PERFORMANCE Volvo Penta lubricants are tested in the toughest possible conditions, from equatorial heat to sub-arctic cold and even at different altitudes above sea level. They are tested for roundthe-clock use just like our engines. The oil is also suitable for winter preservation and keeps its vital functions during off season. 4
VOLVO PENTA OILS SUGGESTIONS AND ADVICE Change oil and filter on time For every hour you operate, the amount of impurities in the oil rises, thus increasing engine wear at the end of the oil s usable life. Seized piston rings are often caused by carelessness with oil changes. It is economical to change the oil filter at the same time as you change oil. A new oil s characteristics deteriorate quickly when an old oil filter is used. When the oil filters become clogged and the oil circulation is obstructed, there is risk for oil stop and engine failure. Maintain cleanliness during all filling of oil When filling oil, it is very important to maintain cleanliness in your work area, especially around the filler hole. Be very thorough because carelessness is one of the major sources of impurities that cause wear, erosion, corrosion and malfunctions. Check the oil level An oil level that is too low is a frequent cause of component failures. Therefore, check the oil level in the engine, transmission and hydraulic system at regular intervals. Direct contact with oil and grease In case of daily contact, the skin may dry out and crack. Therefore, avoid direct skin contact with oil and grease. Oil smoke and oil mist can irritate respiratory organs and damage the nervous system and lungs. In case of contact with eyes, rinse immediately with plenty of water. Volvo PENTA Oil Analysis This is an unbeatable tool that not only allows to plan main tenance but also reduces the risk of unplanned downtime and expensive repairs. Simply put, oil analysis is a basic driveline health check. The analysis provides early warnings which makes it possible to replace components before problems appear and damage occurs. Our oil laboratories are repositories of knowledge and expertise about Volvo Penta products and are able to interpret and analyse results, recommending suitable actions better than anyone else. Regular analyses make trends visible, and bring even better control to engine health management. Oil analysis is carried out in three stages: S The Sample The necessary samples are taken by the Volvo Penta dealer and sent to a Volvo Penta laboratory S The Analysis Our laboratories have ultra modern, advanced diagnostic equipment and experienced, qualified personnel. They analyse the samples and collate a great amount of data including water/coolant content, viscosity, fuel, contaminants, the amount of metallic particles and more S The Diagnosis The results of the rigorous analysis are soon made available to the Volvo Penta dealer. The diagnosis provides immediate recommendations for actions so that critical situations can be avoided. The oil report is a valuable document that confirms your engine s condition and raises its second-hand value. 5
VOLVO PENTA ENGINE OIL SyntHetic PETROL engine oil Fully synthetic oil for year-round use. Specially developed for high output engines. The oil is synthetic and provides excellent protection in both high and low temperatures. Viscosity Quality Synthetic petrol engine oil 15W50 3809429 1 liter SAE 15W-30/50 API SJ/ACEA A3/B3 Synthetic petrol engine oil 15W50 3809428 5 liter SAE 15W-30/50 API SJ/ACEA A3/B3 MULTIGRADE PETROL engine oil A multigrade engine oil, i.e. an oil for year-round use in four-stroke petrol engines. Specially developed for high output engines. Special characteristics enable the oil to lubricate the engine properly even in low-temperature starts. The oil hinders the formation of sludge and provides excellent protection against wear. Especially suitable for engines subject to frequent starts and stops. Viscosity Quality Multigrade petrol engine oil 5W-30 21363429 1 liter SAE 5W-30 API SM Multigrade petrol engine oil 5W-30 21363430 5 liter SAE 5W-30 API SM Multigrade petrol engine oil 5W-30 21363431 20 liter SAE 5W-30 API SM engine oil VDS-3 Volvo Engines Oil VDS-3 15W-40 is a high performance engine oil formulated from high quality mineral base oils and a superior, balanced additive system. It provides excellent lubrication of modern petrol and diesel engines operating in severe applications promoting extended engine life. The product provides superior control of carbon deposit buildup, bore polishing and engine wear, as well as oil thickening, oxidation, corrosion, and sludge formation. Viscosity Quality Engine oil 15W-40VDS3 3840002 1 liter SAE 15W-40 VDS-3, API CI-4, ACEA E5 Engine oil 15W-40VDS3 3840003 5 liter SAE 15W-40 VDS-3, API CI-4, ACEA E5 Engine oil 15W-40VDS3 3840004 20 liter SAE 15W-40 VDS-3, API CI-4, ACEA E5 Engine oil 15W-40VDS3 3840005 Barrel 208 liter SAE 15W-40 VDS-3, API CI-4, ACEA E5 6
VOLVO PENTA TRANSMISSION OIL SyntHetic TRANSMISSION oil 75W90 / 75W140 Fully synthetic oil of the highest quality for IPS sterndrives and reverse gears. Specially tested by Volvo Penta in sterndrives and reverse gears. Because the oil is synthetic it provides excellent protection in both high and low temperatures. It can also withstand very high temperatures without breaking down. Will cope with heavy loads without causing wear. Viscosity Quality Synthetic transmission oil 75W90 3809443 1 liter SAE 75W-90 API GL-5 Synthetic transmission oil 75W90 3809442 5 liter SAE 75W-90 API GL-5 Synthetic transmission oil 75W90 3809441 20 liter SAE 75W-90 API GL-5 NEW! Synthetic transmission oil 75W90 22184298 Barrel 208 liter SAE 75W-90 API GL-5 Synthetic transmission oil 75W140 3809439 5 liter SAE 75W-140 API GL-5 TRANSMISSION oil 80W-90 Lubricant qualities protect sterndrives and reverse gears even under heavy loads. Also provides excellent corrosion protection. Withstands high temperatures without breaking down. Viscosity Quality Synthetic transmission oil 80W90 3809446 1 liter SAE 80W-90 API GL-5 Synthetic transmission oil 80W90 3809445 5 liter SAE 80W-90 API GL-5 Synthetic transmission oil 80W90 3809444 20 liter SAE 80W-90 API GL-5 Hydraulic Transmission Oil Protects against wear in both high and low temperatures. Also provides excellent corrosion protection. Especially suitable for marine use in hydraulic reverse gears. Will not affect sealants. Type Hydraulic oil 21732287 1 liter ISO VG 15 ATF hydralic oil 1161995 5 liter Dextron III 7
VOLVO PENTA COOLANT VOLVO PENTA COOLANT Volvo Penta Coolants are tested over long periods under a range of working conditions to meet our exacting standards. The primary function of coolant is to divert heat away from the engine in the region of the combustion chamber. But a coolant also has additional functions. COOLING Coolant is pumped through the engine block, where it is heated by combustion in the cylinders. When the engine reaches operating temperature the thermostat directs coolant flow through the radiator where it is cooled to a lower temperature. The coolant is then recirculated through the engine to maintain a controlled operating temperature. Corrosion protection The coolant is treated with different chemicals to prevent corrosion in the engine and other parts of the installation. Because this corrosion protection deteriorates over time, cooling system components may be damaged and cause leaks. Coolant must therefore be changed regularly. 2 year change interval for the green coolant and 4 years for the yellow coolant. Freeze protection Coolant contains various forms of glycol, which freezes at a much lower temperature than water. The coolant provides the cooling system with freeze protection. Heating The engine thermostat keeps coolant at around 85 C. The heated coolant may in some cases be used to heat the cabin in the application the engine forms part of. NOTE! Different types of coolant are specified for different engines. Always use the correct Volvo Penta Coolant. Concentrated coolant should always be mixed with water which complies with Volvo ST D 1285,1. 8
VOLVO PENTA COOLANT Volvo Penta coolant (Green) The powerful, fuel-efficient engines of today are designed around a multitude of complicated components. They consist of a number of different materials, such as cast iron, steel, a variety of aluminium alloys, copper, rubber and various plastics. The hot circulating coolant is not permitted to corrode any of these materials. Volvo Penta has therefore developed its own coolants which offers corrosion protection to all the engine s metal parts. This coolant is also non-corrosive in its contact with other materials. Quality Ethylene glycol. Offers excellent protection against freezing and excellent protection against corrosion. Does not contain any nitrites, amine or phosphate. 2 year change interval. Change in out of step with coolant filter where such is used. Must not be mixed with Volvo Penta coolant VCS. (Yellow). See operators manual. Mixing ratios Green coolant 40% = -24 50% = -37 Green Ready Mixed 40% 1141674 5 liter Green Ready Mixed 40% 21646481 Barrel 208L Green Concentrate 1141645 1 liter Green Concentrate 1141646 5 liter Green Concentrate 1141647 Barrel 208L Volvo Penta Coolant VCS (yellow) Coolant for our new generation of engines. The new generation engines are designed around a multitude of complicated components. They consist of a number of different materials and the hot circulating coolant is not permitted to corrode any of these. Volvo Penta has developed this new coolant which offers corrosion protection to all the engine s metal parts. This coolant is also non-corrosive in its contact with other materials. Quality Ethylene glycol coolant VCS. Offers excellent protection against freezing and counteracts cavitation and galvanic corrosion. Does not contain any nitrite, amine, phosphate or silicate. Does not require coolant filter. 4 year change interval. The yellow coolant is dedicated for the new generation of engines and must not be mixed with Volvo s green coolant, nor be used in combination with Volvo s coolant filter. See operators manual. Mixing ratios Yellow coolant 40% = -24 50% = -37 Yellow Ready Mixed 40% 21485014 5 liter Yellow Ready Mixed 40% 21485015 Barrel 208L Yellow Concentrate 21485010 1 liter Yellow Concentrate 21485012 5 liter Yellow Concentrate 21485013 Barrel 208L CLEANING AGENT Neutralizing alkaline cleaning agent for cleaning cooling systems with yellow coolant. 1 kit for 40 l coolant system. Type Cleaning agent (for systems with yellow systems) 21467920 500 ml Anti-rust 9
VOLVO PENTA LUBRICANTS Waterproof grease, saltwater Special grease for the maritime environment especially suitable for salt water. Lubricates, seals and protects against corrosion. Copes with prolonged loads without losing its protective characteristics. Colour Quality Waterproof grease 828250 25 gr Blue NLGI 3 Waterproof grease 21347121 400 ml Blue NLGI 3 Water-resistant grease Waterproof grease lubricates, seals and protects against corrosion. Copes with prolonged loads without losing its protective characteristics. Colour Quality Water-resistant grease 3809449 500 gr Yellow NLGI 3 Bearing Grease Bearing grease is a lithium complex mineral oil based grease with EP additives. The grease is recommended as a universal grease for all ball and roller bearings which are used at both high and low running temperatures. Volvo Penta bearing grease has good thermal stability, which means that it can withstand the high temperature peaks which can occur in bearings during heavy, long-term braking. The grease also has good rust-prevention performance. Quality Bearing Grease 1161251 400 gr NLGI 2 GREASE For electrical contacts For electrical contacts and low temperature applications. NOTE! Not for EVC components. Quality For electrical components 1161417 30 gr 10
VOLVO PENTA LUBRICANTS SILICONE GREASE FOR CRANKSHAFT SEAL Volvo Penta Silicone grease PTFE gives good resistance to oxidation, water and high relative humidity. The grease has a wide temperature range and is highly suitable for lubricating between plastic/plastic and plastic/metal.the grease should not be mixed with other greases. Quality Silicone grease for crankshaft seal 1161687 12 ml PTFE Silicone Silicone grease for crankshaft seal 1161325 50 gr PTFE Silicone impeller lubricant Rubber lubricant for impellers, oil-sensitive O-rings or rubber components. Quality Impeller lubricant 3862178 7 gm Glycerine LUBRICANT FOR INJECTORS Lubricant for injectors, assembly compound. Molycote D, pasta (For injectors) Good corrosion protection and running-in of metallic components. Colour Quality Lubricant for injectors 3588346 500 gr White Molycote D LUBRICANT Lubricant for angle tightening tensile bolts. For cylinderhead screw Lubricant 3588347 25 gr RUBBER LUBRICANT Diffusing rubber lubricant fluid. For installing propeller bushings and IPS seal ring. Rubber lubricant 3817243 100 ml 11
VOLVO PENTA LUBRICANTS Water-repellent universal oil Universal water-repellent contact oil, ideal for protecting all marine electrical equipment. Water-repellent contact oil, spray 85110720 400 ml compressor oil Compressor oils Specially tested for Volvo Penta compressors. Fully synthetic oil able to cope with very high and very low temperatures. Protects compressors against corrosion. Viscosity Compressor oil 85108974 250 ml ISO VG 80 QL bow thruster oil Compressor oils Specially tested for Volvo Penta compressors. Fully synthetic oil able to cope with very high and very low temperatures. Protects compressors against corrosion. QL bow thruster oil 41100129 200 ml 12
13
VOLVO PENTA PAINT VOLVO PENTA PAINT Volvo Penta paints are the best protection against rust and corrosion for engines, drives and transmissions. The appearance and second hand values of the engine is enhanced if all painting operations are carried out using Volvo Penta paints. The spray enamels are environmentally friendly aerosol products, containing no chloro flouro carbons. Used in combination with Volvo Penta spray primer, the products deliver a clean long lasting look and quickly dry. 14
VOLVO PENTA PAINT TOUCH-UP PAINT Engine [SPRAY] Type Red 827501 400 ml Areosol paint White 1141560 400 ml Areosol paint Green, matte 1141566 400 ml Areosol paint Blue Grey 1141567 400 ml Areosol paint Black 1141568 400 ml Areosol paint Grey 1141575 400 ml Areosol paint TOUCH-UP PAINT Engine [TIN] Type Green, glossy 3808214 1 liter Tin Green, matte 3808215 1 liter Tin Red 3808216 1 liter Tin White 21952397 1 liter Tin TOUCH-UP PAINT DRIVE [SPRAY] Type Clear enamel 827502 400 ml Areosol paint Silver & Clear DPH, DPR, Prowler silverrange 889968 2 x 400 ml Areosol paint Primer Blue Grey (Haftgrund NC grau/rot) 1141562 400 ml Areosol paint Metallic Silver SX Drive 3851219 400 ml Areosol paint Metallic Charcoal DPX Drive 3851220 2 x 400 ml Areosol paint Dark Charcoal 3851221 400 ml Areosol paint 15
VOLVO PENTA SEALANT SEALING COMPOUND Seals close fitting joints between rigid metal faces and flanges. Operating temperature range: -50 C - +150 C. Colour Sealing Compound 840879 25 ml Red Chemical Gasket Ideal for use on rigid flanges where high temperatures and chemical resistance are necessary at -50 C to 200 C. Chemical Gasket 1161059 50 ml SEALANT Non-setting sealant used to join flat and abraded surfaces, hose and thread connections and gaskets. The sealant is not fast-drying and is well suited of large areas. Sealant 1161099 125 ml SILICONE One-part silicone adhesive that hardens at room temperature. Suitable for both gluing and sealing where very elastic joints are required able to cope with temperatures from 65 C to +200 C. Excellent adhesion to metal, rubber, glass and most plastics. Type Silicone adhesive 1161231 310 ml Black Silicone 1161277 20 gr Black MANIFOLD ENDS Oil resistant and coolant resistant. Superior adhesion. Good for large gaps. Blow-out resistant. Will not corrode metal surfaces Manifold ends 3853169 75 gr 16
VOLVO PENTA SEALANT SEALANT Ideal for metal components such as cast iron components and pump housings. Operating temperature range: -50 C - +150 C. Silicone, high temperature resistance. Sealant 21076467 300 ml Sealant 21110325 310 ml SEALANT A graphite-based sealant and corrosion inhibitor for pipe joints, flanges and threads in e.g. exhaust systems. Will not damage gasket materials even in high temperatures. Sealant 591247 1 kg 17
VOLVO PENTA ADHESIVE AND LOCKING FLUID GLUE Sealant for exhaust pipes (2-butanonoxim vinyl trioxim silane) flanges in permanent contact with oil. May be used on metal, plastic or painted components. Operating temperature range: -60 C - +200 C Type Quality Glue 1141649 50 ml Adhesive -60 C - +200 C METAL ADHESIVE Maximum resistance against dynamic, axial and radial loads. Ideal for shafts, gears, blocks and similar cylindrical components. Operating temperature range: -55 C to +150 C Type Quality Metal adhesive (Green) 1161370 50 ml Adhesive -55 C till +150 C THREAD SEALING AGENT Medium strength thread lock. Maximum thread size: Up to M36. Breakaway torque, M10 bolts 11.5 Nm. Operating temperature range: -55 C - +150 C. Type Quality Thred sealing agent (blue) 1161053 10 ml Locking fluid -55 C - +150 C Thred sealing agent extra strong (Green) 1161075 10 ml Locking fluid -55 C - +150 C 18
VOLVO PENTA MISC. ANTI-RUST AGENT Thin ML rust prevention oil spray. A solvent-free rust prevention oil in spray can for small workshop jobs or do-it-yourself. The product is intended to be used in sills, beams and other box sections. A soft, waxy film is left after treatment. The rust prevention oil can be sprayed with the accompanying hose, without using any special nozzles. Before use, clean surfaces to be treated with white spirit or degreaser Anti-rust agent 9510227 500 ml Volvo Penta Yellow marking paint Yellow pigment to be mixed with a very small amount of oil. To be used then checking contact pattern of gears. Designation Part No. Type Yellow oxide of iron 3807716 Paint UREA SOLUTION AdBlue is required for most new diesel-driven vehicles in Europe to reduce emissions of harmful particulates. Type Urea Solution 85109697 10 liter Cleaning agent 19
EXPLANATIONS ACE A European automotive manufacturers organisation. Specifies oils for passenger cars, light duty and heavy duty vehicles. ACEA E2, E3, E4, E5, E9 Meet requirements for heavy duty diesel engines. ACEA E9 Meets the most recent requirements. API American Petroleum Institute. Specifies oil quality. API CI-4, CH-4, CG-4, CF, CF-4 Specifies oil quality standard for Diesel Engine Oil. This standard indicates requirements regarding carbon deposits on pistons, bearing corrosion, camshaft wear, oil consumption as well as max. viscosity increase of the oil. API CF-4 Lubricants that only meet the API CF-4 specifications are NOT suitable for Volvo engines. By using such oil there is a risk of engine failure. API CI-4 Oil intended for use in high speed fourstroke diesel engines manufactured to meet 2004 truck emission demands from the USA. Oils that meet the API CI-4 standard are adapted for engines with EGR system. API CJ-4 oils exceed the performance criteria of previous API categories such as CH-4 and CG-4 and can effectively lubricate engines alling for those API Service Categories. API CJ-4 This is the latest standard from American Petroleum Institute. For highspeed four-stroke cycle diesel engines designed to meet USA 2010 model year on-highway and Tier 4 nonroad exhaust emission standards. Optimum protection is provided for control of catalyst poisoning, particulate filter blocking, engine wear, piston deposits, lowand high-temperature stability, soot handling properties, oxidative thickening, foaming, and viscosity loss due to shear. API CJ-4 oils exceed the performance criteria of API CI-4 with CI-4 PLUS, CI-4, CH-4, CG-4 and CF-4 and can effectively lubricate engines calling for those API Service Categories. API GL-5 Refers to oils for hypoid (bevel) gears under high load. EGR Exhaust Gas Recirculation Exhaust gas recirculation (EGR) is a nitrogen oxide (NOx) emissions reduction technique used in petrol/ gasoline and diesel engines. EP grease Grease containing additives to prevent metals surfaces from seizing under extreme pressure (EP) conditions. ISO VG Viscosity classification of industrial oils. A class designation does not entail a quality evaluation, it only i nforms about the viscosity at the reference temperature which is 40 C. VG stands for Viscosity Grade. ISO VG 46 Viscosity s nominal value = 46 cst at 40 C ISO VG 68 Viscosity s nominal value = 80 cst at 40 C Moly grease Grease containing Molybdenum Disulphide particles as a solid additive to improve wear performance in special applications. NLGI number A scale for comparing consistency (hardness) range of greases. Number are in order of increasing consistency with NLGI 0 being semifluid and NLGI 6 solid. SAE Society of Automotive Engineers. Classification of lubricants depending on their viscosity. There are two systems for SAE-numbers, one for engine oils and one for transmission oils. The lower the SAE-no. in respective SAE-system, the thinner the oil. VDS-3 Volvo Drain Specifications. Volvo s high requirements for protection against cylinder polishing, ring wear, camshaft/ tappet wear, high oil consumption, etc. VDS-3 gives lower piston deposits. VCS Volvo Coolant specification This symbol determine that the marked chemical is intended for workshop use. 20
For correct chemicals to your Volvo Penta engine, please contact our authorised Volvo Penta dealers. www.volvopenta.com 47704280 English 2013