1. IDENTIFICATION of THE SUBSTANCE/PREPARATION and COMPANY

Transcription

1 Form No : B-729 Sayfa No : 1/ 7 1. IDENTIFICATION of THE SUBSTANCE/PREPARATION and COMPANY 1.1. Trade Name : PLASTIC TRANSPARENT GLUE 1.2. Product Identification : Polyvinyl acetate essential, water based emulsion glue Manufacturer's Name Company Name : Polisan BOYA KİMYA SAN.TİC.A.Ş Address : Diliskelesi Mevkii.No: Dilovası / GEBZE City : KOCAELİ / TÜRKİYE Phone Number : Fax : Emergency Phone Number : COMPOSITION /INFORMATION ON INGREDIENTS Kimyasalın Adı CAS No EEC No % Weight Hazard Symbols Risk Symbols R Safety Symbols S Ethanediol ,5-0,7 Xn R22 S2 Diisobuthyl phtalate ,17-0,23 N R50/53 S61 3. HAZARDS IDENTIFICATION Hazards : According to the present state of knowledge, provided that this product is handled correctly, there is no known danger to humans. Specific Hazards : - Potantial Health Effects Inhalation : - Skin Contact : Swallowing : - Eye Contact :

2 Form No : B-729 Sayfa No : 2/ 7 After Long Contact Kronic Effects : 4. FIRST AID MEASURES After Inhalation : Move to fresh air. Restore and support contiuned breathing. Get emergency medical attention. Have trained person give oxygen if necessary. Get medical help for any breathing diffuculty. After contact with the eyes : Flush immediately with large amounts of water, especially under lids for least 15 minutes. İf irritation or other effects persist, obtain medical treatmenr. After contact with the skin : Wash thorougly with soap and water. İf any product remains, gently rub petroleum jelly, vegetable or mineral/baby oil onto skin. Repeated applications may be needed. Remove contaminated clothing. Wash contaminated clothing before re-use. After Ingestion : If swallowed, rinse mouth and seek medical advise immediately. 5. FIRE - FIGHTING MEASURES Suitable extinguishing media :CO2, Alcohol resistant foam, extinguishing powder, water spray. Unsuitable extinguishing media : Water jet. Protective equipment for fire-fighters : Firefighters should use full protective clothing, eye protection, and self-contained breathing apparatus. Self-contained breathing apparatus recommended. Hazardous decomposition or combustion products : Carbon monoxide, carbondioxide, toxic gases. 6. ACCIDENTAL RELEASE MEASURES Personal precautions : Avoid contact with skin, eyes and clothing. Environmental precautions : Prevent contamination of soil, drains and surface waters.

3 Form No : B-729 Sayfa No : 3/ 7 Methods for Cleaning up / taking up : Large amounts : Pick up with absorbent material ( eg sand, kieselgur, sawdust ). When picked up, treat material in accordance with local regulations. Small amounts : Wash away with plenty of water. 7. HANDLING AND STORAGE 7.1. Handling Information for safe handling: Keep away from heat, sparks and open flame. Avoid contact with skin and eyes, and breathing of vapors. Wash hands thoroughly after handling, especially before eating or smoking. Avoid conditions which result in formation of inhalable particles such as spraying or abrading (sanding) painted surfaces. If such conditions cannot be avoided, use appropriate respiratory protection as directed under exposure contols/personal protection. Information about fire - and explosion protection : Keep ignition sources away. Do not smoke. Protect against electrostatic charges. Personal protective equipments see part Storage Technical requirements: Stir Well Before Use. Storage conditions : Keep container tightyl closed in a dry and well-ventilated place. Further information on storage conditions : Store at a temperature between 5 to 35 C. Recommended materials : Plastics Other informations : Keep away oxidizing agents, strongly alkaline and strongly acidic materials. 8. EXPOSURE CONTROL / PERSONAL PROTECTION 8.1 Exposure Limits : Not applicable. 8.2 Exposure Controls : Avoid inhaling vapours. Avoid contact with eyes and skin. Keep away from food and drink stuffs. Do not eat, drink or smoke at work. Wash hands before breaks and at end of work and use skin-protecting ointment.

4 Form No : B-729 Sayfa No : 4/ 7 Personal protective equipment Eye protection : Use safety eyewear designed to protect against splash of liquids. Hand protection : For prolonged or repeated handling, use nitrile, neoprene or latex rubber gloves. Barrier creams may help to protect the exposed areas of the skin, they should however not be applied once exposure has occured. Respiratory protection : If workers are exposed to concentrations above the exposure limit they must use appropriate, certified respirators. Skin Protection : Personel should wear anti-static clothing made of natural fibre or of high temperature resistant synthetic fibre. Environmental Protection : Rfr to Heading PHYSICAL AND CHEMICAL PROPERTIES 9.1. General İnformations Form : Viscous Liquid Colour : White Odour : Spesific General Properties. Unite Results Test Method. Viscosity, 20 C : cpoise ASTM D 2186 Solid : % ASTM D 4209 Vapour Pressure : Undetermined. Solubility in water (g/l) : Thinnable. PH : 6,0-7,0 TS Other İnformatins : 10. STABILITY AND REACTIVITY Stable under recommended storage and handling conditions.

5 Form No : B-729 Sayfa No : 5/ Thermal decomposition / conditions to be avoided : Not applicable Materials to avoid : Keep away from oxidizing agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions Hazardous decomposition products : When exposed to high temperatures may produce hazardous decomposition products such as carbon monoxide and dioxide, smoke, oxides of nitrogen etc. 11. TOXICOLOGICAL INFORMATION Acute Toxicity : No toxicity data are available for this materials.the preparation has been assessed following the conventional method of the Dangerous Preparations Directive 1999/45/EC and classified for toxicological hazards accordingly. Long Term Effects : No toxicity data are available for this materials. Inhalation : Inhalation of vapours or mists may cause irritation to the respiratory system. Skin Contact : May cause moderate skin irritation Eye Contact : The liquid splashed in the eyes may cause irritation. Ingestion : No data are available for this materials. 12. ECOLOGICAL INFORMATION There are no data available on the preparation itself. The product should not be allowed to enter drains or water courses. Ecotoxicity : Not applied Mobility : Not applied Persistence/degradability : Not applied Bioaccumulation : Not applied 13. DISPOSAL CONSIDERATION

6 Form No : B-729 Sayfa No : 6/ 7 Disposal Methods : Incinerate liquid and contaminated solids in accordance with local, state and federal regulations.. Uncleaned packaging: Contaminated, empty containers are to be incinerate accordance with local, state and federal regulations. 14. TRANSPORT INFORMATION This preparation is not classified as dangerous according the international transport regulations (ADR/RID, IMDG, ICAO/IATA). Transport Railway and Road : RID / ADR Class : free Transport Air : IATA Class : free Transport Sea : IMDG Class : free 15. REGULATORY INFORMATION Labelling according to EU guidelines: This product does not containany ingredients that are considered hazardous under the criteria of the EU Directives / Ordinance on Hazardous Materials. Hazard symbol and Indication of danger.- Risk Phrases :- Safety Phrases : S2 : Keep out of the reach of children. 16. OTHER INFORMATION Full text of the R-phrases given in Section 2. Xn: Harmful, N:Dangerous for the environment R22 : Harmful if swallowed R50/53: Very toxic to aquatic organisms, May cause long-term adverse effects in the aquatic

7 Form No : B-729 Sayfa No : 7/ 7 environment Full text of the S -phrases given in Section 2. S61 : Avoid release to the environment. Refer to special instructions / safety data sheets This product should be stored only in the original containers, the use different kinds of container for storage should be avoided. The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a quidance for safe handling, use, processing storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not to be valid for such material used in combination with any other materials or in any process, unless specified in the next.