CATALOG DCH0502 Diesel Cylinder Heads & Engine Accessories
All ALLIANCE Cylinder Heads are: Magnafluxed for cracks Repaired and brought back to specifications Built with NEW guides, injector tubes, freeze plugs, seals and keepers 100% Air decay and wet pressure tested Surface ground Machined in seat areas and vacuum tested Sealed with a rust preventative coating Customer satisfaction ensured by quality controlled processes
REMANUFACTURED DIESEL ENGINE CYLINDER HEADS 30B C10 / C12 C10 / C12 Reference # 132-325 1-297 ' 97 On-Highway Reference # 133-7052 ' 98 On-Highway C-15 1. liter / 893 / 99-03 D315 D318 D320 D330 D330-C D333 D333-C D33/17 D30 D32 Early D32 Late D33/193 CATERPILLAR Cylinder Reference # 8B5 Cylinder Reference # Long 5F1305 7H9853 Reference # Short 5B520 5B5239 Reference # 5M8153 Reference # 2S900 Reference # 7S7070 Reference # 5S188 Reference # 1P303 Reference # 5S808 Reference # 5M701-8M22 Reference # 8N00 Non-Spacer Plate Reference # 5N8501 Spacer Plate 1/2" or 3/8" Guides Reference # N75 P510 P510 7F37 F5508 H8727 7H39 LONG 3F9903 7F7878 H812 SHORT 5B519 5B837 7B21 2M757 5M700 8H8805 8M70 2S9000 5S700 5S2222 2S9790 2M517 1P302 1P370 9S88 3S7707 8M200 5M3700 8H5980 H7258 7N380 7N3503 8N7 9S0003 5M300 1
REMANUFACTURED DIESEL ENGINE CYLINDER HEADS CATERPILLAR CONTINUED D3A Reference # 7M915 8 5M800 D3B Reference # 7N9297 8 7N9295 D38 7N950 12 Reference # 7N9532-5S5137 8S3900 D353 Reference # 7N30 Early Non-Spacer Plate 8N232 D353 Late D379 D398 D399 Reference # 7N330 Spacer Plate Reference # 7L0138 Reference # 7L0138 Reference # 5N8319 7N3031 8 L3800 12 L7200 1 5N5280 311 REF# 7E20, 101-3252, 119-298 101-570 312 REF# 157-837 3 VALVE 98' ON HIGHWAY 133-373 317 REF# 101-207, 1-291 Fits Early serial #'s: 2YG, 7LG, 3Z1 9Y78 317B REF# 101-00, 133-7051, 1-29 10-38 320DI 320PC Reference # 9N3111 Reference # 9N0320 9N1107 9N232 9N0275 3208 2W715 Natural Aspirated, Direct Injection 8 9N232 Serial # 32Y Ref # 51Z 9N5215 3208T Turbo, Serial # 2Z Dual Valve Spring 8 1W1587 2W715 9L7230 330 N801 Early Style Non Spacer Plate 2P8 Reference # N7 N887 330PC Reference # 8N1188 Spacer Plate 7N851 NEW 330PC Call for price & availability 7N851 330DI Reference # 1N30 7C390 7C00 NEW 330DI Call for price & availability 7C390 7C00 330 Early Style Non Spacer Plate 2P87 Reference # N7 N8888 330PC 1W5320 Reference # 8N1187 7N852 Spacer Plate 8N1 NEW 330PC Call for price & availability 1W5320 7N852 8N1 2
REMANUFACTURED DIESEL ENGINE CYLINDER HEADS CATERPILLAR CONTINUED 330DI Reference # 8N79 7N885 7C390 NEW 330DI Call for price & availability 7N885 7C390 30A 7N1300 Reference # N220 W5170 PC- Engine 7W0008 NEW 30A Call for price & availability 7N1300 W5170 7W0008 30B Reference # W23 7W2203 Direct Injection 7W000 7W0009 7W2200 NEW 30B Call for price & availability 7W000 7W0009 7W2200 30C Reference # I3598 110-5100 G30 Reference# 115-232 119-0, 110-5093 110-5100 30E Reference # P5052 122-702, 122-802 P1599 N0351 308A Reference # N1817, 7N0858 N997 8 PC - Engine 7N0855 7W1708 308B Reference # 7W2225 Direct Injection 8 7W2222 312A Reference # 7N088 PC - Engine 12 7N085 312B Reference # 7W223 Direct Injection 12 7W222 7W220 B CUMMINS 855-NTC 855 series Big CAM I, II, III 301991 O.E.M. 3008100RX 855 series/ New Stellite Valves 855-NTC Big CAM I, II, III Premium O.E.M. 3008100RX 301991 855-BC IV Big Cam IV-NTC 00 Early Old Style Casting Large Springs 301991 855-BC IV Late Small Exhaust Port, 3/8 Injector Hold Down Standard Valve Spring O.E.M. 3055098RX 3070 3
REMANUFACTURED DIESEL ENGINE CYLINDER HEADS CUMMINS Small Exhaust Port, 855-BC IV 3/8 Injector Hold Down Late 3070 Large Valve Spring NTC O.E.M. 305019RX 88-NTC BC IV 91N1 9N1 9N1 Same as NTC with Recessed Valve Seats O.E.M. 30533RX Scalloped Combustion Face Horizontal Exhaust Mounting O.E.M.30737RX Recessed Valve Seats Specify Horizontal, Vertical, or Universal Exhaust Mounting 30 Degree Seat O.E.M. 30739RX Recessed Valve Seats Specify Vertical or Universal Exhaust Mounting 5 Degree Seat O.E.M. 3072RX 3070 3055288 307830 307830 B 3.9 Liter 3902521 39112 NEW B Call for price & availability 3902521 39112 B 5.9 Liter 390573 391027 NEW B Call for price & availability 390573 391027 C Pre ' 91 O.E.M. 3913111 RX 391128 21" Air Intake 39088 C '91 & Up 3921051 O.E.M. 3802259 RX 392127 1 " Air Intake 3921050 L10 (88) Dual Valve Springs 3033227 O.E.M. 003970RX * 301527RX 3055721 L10 (91) Single Spring O.E.M. 307351RX * 003980RX 3883525 M 11 Reference # '9-003988RX '95-0008RX 30852 C-10/180/190 BM78 1351 AR1178 13551 NH220-73 BM091RX Thick Intake Valves (same thickness as exhaust) 12020 NH220-73 BM0971RX Thick Intake Valves (eight stellite inserts) 12023 V352-378 Old Style AR077RX 15313 V352-378 New Style 327550RX 3275 V70 / V50 Old Style AR079RX 157782 V70 / V50 New Style 327551RX 327571 V555 / VT225 Old Style AR1110RX 55337 V555 / VT225 New Style 327552RX (Natural) 327553RX (Turbo) 32752
REMANUFACTURED DIESEL ENGINE CYLINDER HEADS CUMMINS V903 / VT903 AR11171RX 180100 180102 V / VT1710 Old Style Wet AR1172RX 133570 V / VT1710 New Style Wet 305287RX (Fuel Drillings) 133577 V / VT1710 New Style Dry 3052177RX 13357 V / VT1710 KT / KTA19 Standard KT / KTA Prem 1*2 KT / KTA38 KT50 STD KT / KTA38 KT50 Prem 1&2 New Style Dry AR1175RX (Fuel Drillings) Reference # 30153RX 3811988RX NOT for marine or constant speed applications Reference # 3811985 RX Tribaloy Intake Valve Seat, Inconel Exhaust Valve Reference # 302192RX 3811988RX NOT for Marine or Constant speed applications Reference # 3811985 RX Tribaloy Intake Valve Seat, Inconel Exhaust Valves 133573 3009088 30810 30810 3007207 205015 31719 30810 30810 REMANUFACTURED ROCKER BOXES CUMMINS MODEL DESCRIPTION CYL Core Code 303591 RX Rocker, Upper BC/SC (J-Brake) 303591 D 307153 RX Rocker, Upper 88NT (C-Brake) 307153 D REMANUFACTURED CAM FOLLOWERS CUMMINS MODEL DESCRIPTION CYL Core Code 301858 3081251 RX BIG CAM--CAM FOLLOWER 301887 (303939) 3000098 3010158 5
REMANUFACTURED DIESEL ENGINE CYLINDER HEADS 0 Series DETROIT DIESEL 53 Series Valve 3-53 / V53 Reference # 5198203 5135029 NEW 3-53 / V53 Call for price & availability 5135029-53 / 8V53 Reference # 5198202 51329 NEW -53 / 8V53 Call for price & availability 51329 71 Series 2 Valve 2-71 Reference # 5189858 2 3-71 Reference # 5198218 511325-71 Reference # 5198218 8 511738-71 / 12V71 Reference # 5198219 12 510958 71 Series Valve 3-71 / V71 Reference # 510279 5117107-71 / 8V71 Reference # 5102771 8 511733-71 / 12V71 Reference # 5102770 12 511735 5111 92 Series Valve V92 Reference # 519877 51853 8V92 Reference # 519878 8 51852 19, 0, 8.2 Series 19 Series Reference # 89270 301755 8.2 Series 8922929 8 892277 0 Series 11.1 Liter or 12.7 Liter 8929872 892920
REMANUFACTURED DIESEL ENGINE CYLINDER HEADS GM.2/.5.2 8-91.2 liter 8 1057299 107712 1028901 1013712 1013757 NEW.2 Call for price & availability 8 1057299 107712 1028901 1013712 1013757.5 9-9.5 liter 8 1013757 NEW.5 Call for price & availability 8 1013757 ISUZU BD1-T BD1 8-91 5-107-0 BD2 92-98 8-53-1 NEW BD2T Call for price & availability 8-53-1 7
REMANUFACTURED DIESEL ENGINE CYLINDER HEADS INTERNATIONAL / NAVISTAR DT30 80392C91 1810075C 7552C-1 DTB 88833C1 DTC 181850C1 Specify 3/8 or 5/1 Valve Guide (New Generation) 182233C1 DT E 182391C5 1827118C2.9 1983-1987 8 180529-C1 1805855-C1 7.3 1988-1995 8 1808030-C1 NEW 7.3 Call for price & availability 8 1808030-C1 9.0 1978-1985 8 89097-C9.9 MACK 75 2 Valve Head Horizontal Exhaust Manifold 732GB383X 7 2 Valve Head Vertical Exhaust Manifold 732GB397X (can be used w/ horizontal exhaust) E Valve Head (All E) 732GB32X E7 Valve Head (Non E-Tech) 732GB352MX E7 E7- E - Tech Pushrod Tube Holes are on a 5 angle valves are different than STD E7 8 732GB385MX E9 1000 Series 732GB321 For information on additional availability & pricing please call 1-800-80-199 8
Authorized Engine Parts Supplier #1 Source for Quality Diesel Engine Components Engine Overhaul Kits Turbo Chargers Fuel Injectors Oil Coolers Connecting Rods Valves Int./Exh. Diesel Crankshafts Lube Oil Pumps Water Pumps Camshafts Vibration Dampners Aftercoolers Caterpillar Cummins Detroit Diesel International Mack Komatsu Isuzu Case GM Ford John Deere Wankesha Navistar Perkins Nissan Industrial Iveco Fiat Allis Allis-Chalmers If you don't see it here... Call us at 1 800-80-199 www.alliancedet.com *All Manufacturers names, symbols & descriptions are used for reference purpose only and does not imply that any part listed is the product of these manufacturers.
Technology designed to restore out of tolerance components, back to Original Equipment Specifications Benefits: Low cost solution Cold process under 200 F No pre or post heating No induced material stress Superior bond strength High deposition rate Extended core life Applications: Engine blocks Cylinder heads Crankshafts Pump housing Flywheels Shafts Bearing surfaces and many more... Thermal Cast
ALLIANCE REMANUFACTURING, INC. WARRANTY POLICY AND REMANUFACTURED CYLINDER HEADS The limited warranty policy of Alliance is as follows: 1. Alliance expressly warrants that its unit will, when shipped by us to the original purchaser, be free from defects in material and workmanship. This express warranty shall apply only to cylinder heads with NEW components, which are properly installed and maintained in the type of vehicle which has been prescribed for their use, and in which defects in material and workmanship shall appear within 12 months of purchase date. Cylinder heads with RECONDITIONED components will carry a warranty for six months. Bare cylinder heads are warranted on castings only. Loaded cylinder heads are warranted for the casting and loaded components. 2. Alliance's obligation under this express warranty shall extend only to the repair or replacement, at our option, of any part or parts of any unit which has been returned to us, transportation charges prepaid, with a written statement of the reason therefore, promptly after any claim of breach of warranty shall arise, and which upon examination by us, shall appear to have been defective in material and workmanship. In lieu of such repair or replacement, this company may, at its option refund to the person having the benefit of this warranty the amount such person shall have paid for the unit. Under no circumstances will Alliance be liable for any consequential or incidental damages including claims for labor charges, transportation and loss of revenue. Replacement of cylinder head and labor will be according to OEM flat rate guide. Warranties implied by law shall also apply to each unit but only for such time as the foregoing express warranty shall apply to that unit. The factory's obligation with respect to a breach of any implied warranty shall be the same as in the case of a breach of the foregoing express warranty. EXCEPT FOR THE EXPRESS WARRANTY STATED ABOVE AND FOR SUCH LIMITED IMPLIED WARRANTIES, THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR PURPOSE, WHICH SHALL APPLY TO ANY UNIT AND THE FACTORY HEREBY DISCLAIMS ANY AND ALL SUCH OTHER WARRANTIES. The obligations of the factory shall not exceed beyond the obligations undertaken above. THE FACTORY SHALL HAVE NO LIABILITY OR RESPONSIBILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Any action based on any breach of any of the said warranties shall be presented within 12 months after cause of action therefore accrues. Any action brought thereafter shall be barred- if any unit shall be disassembled, modified, or otherwise tampered with, all the foregoing warranties shall lapse and become null and void. Every cylinder head is fitted with an overheat sensor. If the sensor has dissolved, been removed, or tampered with, in any way, all warranties are null and void. The laws of Pennsylvania shall govern this Limited Warranty. NO PERSON IS AUTHORIZED BY THE FACTORY TO AGREE ON ITS BEHALF TO ANY MODIFICATION OF THE FOREGOING. 3. All units sent for Warranty/Defect must be tagged using Alliance Warranty Claim Tag and have an RGA number assigned. All defective cylinder heads must be returned unclean. The cylinder head must be shipped as junk parts by transportation services.. No warranty credits will be issued until a complete analysis of unit is performed by Alliance's Quality Control Department. 5. Account pays inbound freight. Freight will be reimbursed if unit is found to be defective.. Any units returned to Alliance for Warranty/Defect that have not been remanufactured by Alliance will be returned to account. Every effort will be made to return unit in the same box and condition that it was received, although this cannot be guaranteed, in the most efficient manner. Any deviation from this policy must be approved by Alliance Sales Department. 7. As stated above, any Alliance units sent in for Warranty Defect that upon inspection are found to have been tampered with, altered, disassembled, modified Or damaged during Installation will render the unit null and void of all warranty provisions.
ALLIANCE REMANUFACTURING, INC. FREIGHT POLICY The following Freight and Shipping Policy pertains to all Alliance shipments: 1. Freight is prepaid by Alliance on all orders of $5,000 net exclusive of core charges. (See chart for average costs and unit requirements for freight prepaid.). See freight policy. 2. Freight on core returns is reimbursed by Alliance when returns exceed 1000 lbs. Accounts should return cores to: Alliance Remanufacturing, Inc. Attn-. Core Department 50 E. Luzerne St. Philadelphia, PA 1912 See chart for designated freight carriers. Current carriers authorized by Alliance and areas covered are NEW PENN TRANSPORT - CONWAY - ROADWAY EXPRESS 3. Freight to Hawaii, Puerto Rico, Canada and other export markets will be shipped in most efficient and cost effective manner. Alliance will designate carrier.. Failure to use Alliance authorized carriers or meet weight requirements will result in charge back to customer for freight charges. 5. Alliance does not receive freight shipments that are sent C.O.D.. All returns to Alliance should include: - Account Name and Address - Account Packing Slip - Quantity of Units Returned - RGA number listed on paperwork for tracking 7. All orders sent to Alliance will be shipped with backorders held- No backorders will be canceled unless Alliance is notified in writing or it is stated on P.O. 8. All orders will be palletized and shrink wrapped. Accounts not wanting units palletized should contact Alliance's Customer Department. 9. All returns to Alliance of cores and warranty units should be returned CLASS 50. 10. All shipments should be sent to: Alliance Remanufacturing, Inc. 50 E Luzerne St. Philadelphia, PA 1912
ALLIANCE REMANUFACTURING, INC. CORE POLICY The following is Alliance's Core Policy and Procedure information: 1. Core credits will be issued only on cores taken in from the sale of Alliance units. 2. Only as many units as purchased may be returned for credit. Example-. If 200 units are purchased, up to 200 old units may be returned for credit. Units should be of the same type and configuration. 3. Dollar value on core credits may not exceed dollar value on cores purchased. Example: If $200 cores are purchased, up to $200 core credits will be allowed.. Only units that are received as a result of the sale of our rebuilds may be returned for credit. Please do not obtain old cores from other sources. This policy helps maintain properly balanced inventories. Only identical exchange units will be accepted for credit. 5. The total quantity of core value of old units acceptable for core credit is limited to the total quantity of core value of units purchased on outright basis during the previous twelve-month period. All claims for shortage must be made within 5 days after receipt of merchandise.. Excess customer units will be listed in a core bank these units will be used against future purchases or may be claimed by customer within one year. All units in our possession after one year are considered property of the factory. 7. Credits are issued against current price sheets, and may only be liquidated by a merchandise purchase. 8. Cores sent back that are not acceptable will receive reduced value or no core value. (See Core Checklist for devaluation causes by product). 9. Any units returned will be treated as cores, unless, noted on account paperwork. 10. Alliance will not be responsible for units lost in transit. Credit will be given for units received, checked in and verified by Alliance Core Department. Any shortage claims resulting from transit problems are the responsibility of the returning account to make a claim against trucking company. 11. Core credits for less than full value will not be returned to account, unless request is made in writing and on file with the Alliance Core Department. Core deductions will be taken according to the following a. Calipers ½ Core value for damaged/broken casting. Missing pistons. b. Engine Heads No core deductions. A core that is damaged beyond repair will not be accepted. 12. All cores must be returned in original box. RGA is required for all core returns. 13. Freight is prepaid on 1000 lbs. of cores. Core returns should be listed as Class 50 on shipping documents. (See Weight Chart and Authorized Carrier Chart in Section E - Shipping Policy.) 1. Account should attempt to list all cores returned with Alliance part numbers and group the same numbers together. However, it should be noted that Alliance will identify units with exact part number at time of check in. 15. No customer should make a deduction for core credit from statement prior to Alliance's issuance of credit memo. Alliance will make every effort to issue core credit within 15 days of receipt.