Only nature imprints so well EN
Unica: the rotary printing machine REGGIANI s big success is largely due to the rotary screen printing machine UNICA. More and more Customers WORLDWIDE are printing woven and knitted fabrics, wide and narrow width, for household and fashion as well, with great satisfaction and PROFITABILITY.
The new printing units highlight the typical features and advantages that, in more than 60 years, made REGGIANI the MANUFACTURER of REFERENCE for TOP QUALITY printing machines: Closed bearing printing heads Multi-repeat printing heads (from 640 to 1018 mm, no need of tools to change the repeat) Totally sealed and long-life lubricated printing heads (maintenance-less) Step-less adjustment printing height according to the thickness of fabric Step-less adjustment printing width (any screen cutting length accepted) Individual screen drive with one or two BRUSHLESS servomotors in closed loop UNIFLUX linear magnetic system Easy and simple machine operation, with touch screen interfaces High reliability-efficiency electronics
UNICA Rotary Printing Machine Dust and lint removal device Reggiani supplies a system to remove dust and lint from the fabric to be printed. The new inverter allows the reduction of the torque and the modulation of the suction required. The new pneumatic glue application Allows the perfect and continuous adjustment of the thickness of the glue on the fabric, reducing the maintenance job Quality and efficiency
Pumps Pneumatic stainless steel pumps with different deliveries. The high quality of their components allows the use of colour pastes with different values of viscosity always assuring a perfect printing evenness. Rapid pump washing: optional This system, introduced on Reggiani machines to reduce dramatically the waste of time and water, allows the rapid washing of the colour feeding circuit (ducts, suction, delivery, colour pump) by means of established sequences of pressurized water ejections. The standard time execution is 30 seconds, the water consumption is max. 30 lt/colour. The new blanket washing system Reduces considerably water consumption. Two brushes, one for each tank, work with variable speed to optimise the blanket cleaning. Four rubber squeegees (the last one also adjustable) clean and dry perfectly the blanket. The two brushes are equipped with inverter that allows the reduction of the torque and the adjustment of the brushes rotation speed according to the printing speed. for high profitability
UNICA Rotary Printing Machine Closed bearing printing heads High precision and accuracy Self-aligning screen holders Evenness in the screen tension Perfect driving of the screen No risk of damaging the screens, no mechanical wearing Totally sealed and long-life lubricated (no maintenance required) Easy screen installation (with one operator only) Optimum control/access to the printing, even with big repeats, thanks to the large distance between the printing heads Multi-repeat printing heads 640 668 688 725 801 819 914 1018 From 640 to 1018 mm, totally pneumatic and electronically controlled, no need of tools to change the repeat. The operator is setting the repeat value in the main touch screen, all the printing heads raise up and the screens can be easily installed on the machine without any extra mechanical parts but with a great save of time. Technology and innova
Uniflux linear magnetic system Perfect evenness and uniformity also with wide width fabrics No centre-right, centre-left effect High flexibility Digital printing pressure step-less adjustment, from ultra-low to very high pressure High efficiency and very low energy consumption No pole to pole overpressure (typical in multi-beam magnet systems) Screen Fabric Magnet Individual screen drive With one brush-less servomotor With two brush-less servomotors tion for the best quality
UNICA Rotary Printing Machine Easy and friendly machine operations high efficiency and low consumption All the electronic components are the most updated and performing available on the market: the standard of Siemens (PLC, motion controls, inverters), as well as of Proface (control panels and touch screens). The interfaces are simple and of immediate understanding: One touch screen at the entry and exit of the machine; One touch screen on each printing unit (on both sides on demand); One main control board with a 15 TFT touch screen; One touch screen at the exit of the dryer. Printing and design parameters can be easily adjusted, memorized and automatically reproduced. High reliability and very low energy consumption are the results of REGGIANI s continuous efforts and investments in R & D. Nowadays energy consumption is becoming more and more important in an industrial budget. Reggiani, who is always concerned about environmental issues, has equipped his rotary printing machine 'Unica' with inverters on the dust and lint removal device, on the blanket washing, on the dryer fans, on the dryer exhaustion to guarantee a 25% saving on the energy consumption. Moreover Reggiani applies the regenerating devices Sinamics (by Siemens) that allow to recover the braking energy. Easy and friendly wi
Washing-on-line system (WOL: optional) The washing on line system patented by Reggiani (patent N.1.271.128) is more and more appreciated by Customers worldwide. No operator required, in 10-12 minutes, IT IS POSSIBLE TO WASH AND DRY all the screens, the pumps, the color pipes, the blanket ON THE MACHINE. The length and the numbers of the washing and drying cycles can be decided by the operator (and then memorized and automatically reproduced). After the washing/drying cycles, the machine is ready to re-start printing without any extra time to register the screens. Conceived mainly for the colourways, the WOL system is washing so fast and well that it is normally used also when a new design has to be printed. During printing During washing th low consumption
UNICA Rotary Printing Machine Technical data models: 180, 200, 240, 280, 320 cm number of colors: up to 24 speed: up to 90 mt/minute printing heads: closed bearing, self-aligning, long-life lubricated multi-repeat printing heads: from 640 to 1018 mm, step-less adjustment electronically controlled screen drive: with one or two brush-less motors printing width: step-less adjustment squeegee system: with Uniflux linear magnetic system operating and color side: right or left gluing system: with pneumatic squeegee blanket washing system: 2 variable speed brushes, 4 rubber squeegees (the last one adjustable) interfaces: touch screens on each printing unit, touch screens at the entry/exit of the machine, one control board with a 15 TFT touch screen electrical cabinet: conditioned teleassistance: built-in modem for troubleshooting and telediagnosis
Via Zanica, 17/o - 24050 Grassobbio (BG) - Italy - Tel. +39 035 3844511 - Fax +39 035 526952 - www.reggianimacchine.it - info@reggianimacchine.it