TESLA K20 GPU ACCELERATOR BD-06455-001_v09 October 2014 Board Specification
DOCUMENT CHANGE HISTORY BD-06455-001_v09 Version Date Authors Description of Change 01 August 1, 2012 GG, SM Preliminary Information (Information contained within this document is subject to change) 02 September 6, 2012 GG, SM Updated Key Features section Updated Figure 1 Updated Table 1 Updated Standard I/O Connector Placement section 03 September 7, 2012 GG, SM Updated Table 4 General edits throughout this specification 04 October 9, 2012 GG, SM Changed Gen3 to Gen2 Updated block diagram (Figure 1) Added memory bandwidth Changed idle power to 25 W 05 November 9, 2012 GG, SM Removed Preliminary Information from document as this board specification is now final Removed NVIDIA Confidential from document Updated package size Updated block diagram (Figure 1) 06 January 14, 2013 GG, SM Added MTBF to Table 1 07 July 5, 2013 GG, SM Updated Figure 2 08 July 11, 2013 GG, SM Updated memory configuration (20 pcs of 128M x 16) throughout the board specification 09 October 15, 2014 GG, SM Updated Figure 2 Tesla K20 GPU Accelerator BD-06455-001_v09 ii
TABLE OF CONTENTS Overview... 1 Key Features... 1 Tesla K20 Block Diagram... 2 Configuration... 3 Mechanical Specifications... 4 PCI Express System... 4 Tesla K20 Bracket... 5 Power Connectors... 6 Power Specifications... 9 Support Information... 10 Certificates and Agencies... 10 Agencies... 10 Languages... 11 Tesla K20 GPU Accelerator BD-06455-001_v09 iii
LIST OF FIGURES Figure 1. Tesla K20 Block Diagram... 2 Figure 2. Tesla K20 GPU Accelerator... 4 Figure 3. Tesla K20 Bracket... 5 Figure 4. 6-Pin PCI Express Power Connector... 6 Figure 5. 8-Pin PCI Express Power Connector... 7 LIST OF TABLES Table 1. Board Configuration... 3 Table 2. 6-Pin PCI Express Power Connector Pinout... 8 Table 3. 8-Pin PCI Express Power Connector Pinout... 8 Table 4. Auxiliary Power Connectors... 9 Table 5. Languages Supported... 11 Tesla K20 GPU Accelerator BD-06455-001_v09 iv
OVERVIEW The NVIDIA Tesla K20 graphics processing unit (GPU) accelerator is a PCI Express, dual-slot full height (4.376 inches by 10.5 inches by 1.52 inches) form factor computing module comprising of a single GK110 GPU. The Tesla K20 is designed for servers and offers a total of 5 GB of GDDR5 on-board memory and supports PCI Express Gen2. The Tesla K20 can be configured by the OEM or by the end user to enable or disable ECC or error correcting codes that can fix single-bit errors and detect double-bit errors. Enabling ECC will cause some of the memory to be used for the ECC bits, so the user available memory will decrease by 10%. On the Tesla K20, the register files, cache, and DRAM are ECC protected. KEY FEATURES GPU Number of processor cores: 2496 Processor core clock: 706 MHz Package size: 45 mm 45 mm 2397-pin ball grid array (S-FCBGA) Board PCI Express Gen2 16 system interface Physical dimensions: 4.376 inches 10.5 inches, dual-slot Display Connectors None Tesla K20 GPU Accelerator BD-06455-001_v09 1
Overview Power Connectors One 6-pin PCI Express power connector One 8-pin PCI Express power connector Memory Memory clock: 2.6 GHz Memory bandwidth: 208 GB/sec Interface: 320-bit Total board memory: 5 GB 20 pieces of 128M 16 GDDR5, SDRAM BIOS 2Mbit Serial ROM TESLA K20 BLOCK DIAGRAM Figure 1 is the block diagram for the Tesla K20 GPU dual-slot computing processor module. Figure 1. Tesla K20 Block Diagram Tesla K20 GPU Accelerator BD-06455-001_v09 2
Overview CONFIGURATION The Tesla K20 board is available in the following configuration (Table 1). Table 1. Board Configuration Specifications Generic SKU reference Chip Package size GPU Processor clock Memory clock Memory size Memory I/O Tesla K20 699-22081-0208-xxxx GK110 45 mm 45 mm 2397-pin S-FCBGA 706 MHz 2.6 GHz 5 GB 320-bit GDDR5 Memory configuration Display connectors Power connectors Board power Idle power Thermal cooling solution 20 pieces of 128M 16 GDDR5 SDRAM None 8-pin PCI Express power connector 6-pin PCI Express power connector 225 W 25 W Passive heat sink Mean time between failures (MTBF) Uncontrolled environment: 136413 hours at 35 C Controlled environment: 219282 hours at 35 C Tesla K20 GPU Accelerator BD-06455-001_v09 3
MECHANICAL SPECIFICATIONS PCI EPRESS SYSTEM The Tesla K20 board (Figure 2) conforms to the PCI Express full height (4.376 inches by 10.5 inches) form factor. 10.5 inches 4.376 inches Figure 2. Tesla K20 GPU Accelerator Tesla K20 GPU Accelerator BD-06455-001_v09 4
Mechanical Specifications TESLA K20 BRACKET As shown in Figure 3, the Tesla K20 includes a vented bracket. If you are an OEM who qualifies for bracket modifications, you have the option of receiving your module with no bracket installed. Figure 3. Tesla K20 Bracket Tesla K20 GPU Accelerator BD-06455-001_v09 5
Mechanical Specifications POWER CONNECTORS The Tesla K20 GPU accelerator is a performance optimized, high-end product and uses power from the PCI Express connector as well as external power connectors. Figure 4 and Figure 5 show the specifications and Table 2 and Table 3 show the pinouts for the 6-pin and 8-pin PCI Express power connectors. Figure 4. 6-Pin PCI Express Power Connector Tesla K20 GPU Accelerator BD-06455-001_v09 6
Mechanical Specifications Figure 5. 8-Pin PCI Express Power Connector Tesla K20 GPU Accelerator BD-06455-001_v09 7
Mechanical Specifications Table 2. 6-Pin PCI Express Power Connector Pinout Pin Number Description 1 +12 V 2 +12 V 3 +12 V 4 GND 5 Sense 6 GND Table 3. 8-Pin PCI Express Power Connector Pinout Pin Number Description 1 +12 V 2 +12 V 3 +12 V 4 Sense1 5 GND 6 Sense0 7 GND 8 GND Tesla K20 GPU Accelerator BD-06455-001_v09 8
POWER SPECIFICATIONS The Tesla K20 GPU accelerator requires power from the PCI Express connector as well as one or two auxiliary power connectors. Table 4. Auxiliary Power Connectors 8-Pin Header 6-Pin Header Support Notes Connect 8-pin cable Connect 6-pin cable Yes Connect 8-pin cable No cable installed Yes 8-pin cable must supply 150 W Connect 6-pin cable Connect 6-pin cable No 8-pin connector should always be connected Note: Detailed information about power draw by rail will be available to authorized system partners in the Tesla K20 System Design Guide. Tesla K20 GPU Accelerator BD-06455-001_v09 9
SUPPORT INFORMATION CERTIFICATES AND AGENCIES Agencies Australian Communications Authority and Radio Spectrum Management Group of New Zealand (C-Tick) Bureau of Standards, Metrology, and Inspection (BSMI) Conformité Européenne (CE) Federal Communications Commission (FCC) Industry Canada - Interference-Causing Equipment Standard (ICES) Korean Communications Commission (KCC) Underwriters Laboratories (cul) Voluntary Control Council for Interference (VCCI) Tesla K20 GPU Accelerator BD-06455-001_v09 10
Support Information LANGUAGES Table 5. Languages Supported Windows Server 2008 and Windows Server 2008 R2 English (US) English (UK) Arabic Chinese, Simplified Chinese, Traditional Danish Dutch Finnish French French (Canada) German Italian Japanese Korean Norwegian Portuguese (Brazil) Russian Spanish Spanish (Latin America) Swedish Thai x Linux Note: NVIDIA s CUDA software is only supported in English (U.S.) Tesla K20 GPU Accelerator BD-06455-001_v09 11
Notice The information provided in this specification is believed to be accurate and reliable as of the date provided. However, NVIDIA Corporation ( NVIDIA ) does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information. NVIDIA shall have no liability for the consequences or use of such information or for any infringement of patents or other rights of third parties that may result from its use. This publication supersedes and replaces all other specifications for the product that may have been previously supplied. NVIDIA reserves the right to make corrections, modifications, enhancements, improvements, and other changes to this specification, at any time and/or to discontinue any product or service without notice. Customer should obtain the latest relevant specification before placing orders and should verify that such information is current and complete. NVIDIA products are sold subject to the NVIDIA standard terms and conditions of sale supplied at the time of order acknowledgement, unless otherwise agreed in an individual sales agreement signed by authorized representatives of NVIDIA and customer. NVIDIA hereby expressly objects to applying any customer general terms and conditions with regard to the purchase of the NVIDIA product referenced in this specification. NVIDIA products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of the NVIDIA product can reasonably be expected to result in personal injury, death or property or environmental damage. NVIDIA accepts no liability for inclusion and/or use of NVIDIA products in such equipment or applications and therefore such inclusion and/or use is at customer s own risk. NVIDIA makes no representation or warranty that products based on these specifications will be suitable for any specified use without further testing or modification. Testing of all parameters of each product is not necessarily performed by NVIDIA. It is customer s sole responsibility to ensure the product is suitable and fit for the application planned by customer and to do the necessary testing for the application in order to avoid a default of the application or the product. Weaknesses in customer s product designs may affect the quality and reliability of the NVIDIA product and may result in additional or different conditions and/or requirements beyond those contained in this specification. NVIDIA does not accept any liability related to any default, damage, costs or problem which may be based on or attributable to: (i) the use of the NVIDIA product in any manner that is contrary to this specification, or (ii) customer product designs. No license, either expressed or implied, is granted under any NVIDIA patent right, copyright, or other NVIDIA intellectual property right under this specification. Information published by NVIDIA regarding third-party products or services does not constitute a license from NVIDIA to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property rights of the third party, or a license from NVIDIA under the patents or other intellectual property rights of NVIDIA. Reproduction of information in this specification is permissible only if reproduction is approved by NVIDIA in writing, is reproduced without alteration, and is accompanied by all associated conditions, limitations, and notices. ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS, DIAGNOSTICS, LISTS, AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, MATERIALS ) ARE BEING PROVIDED AS IS. NVIDIA MAKES NO WARRANTIES, EPRESSED, IMPLIED, STATUTORY, OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE. Notwithstanding any damages that customer might incur for any reason whatsoever, NVIDIA s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the NVIDIA terms and conditions of sale for the product. Trademarks NVIDIA, the NVIDIA logo, CUDA, and Tesla are trademarks and/or registered trademarks of NVIDIA Corporation in the U.S. and other countries. Other company and product names may be trademarks of the respective companies with which they are associated. Copyright 2012, 2013, 2014 NVIDIA Corporation. All rights reserved. www.nvidia.com