BEST ELECTRONIC & MECHANICAL LOCKS PRICE LIST 62 GSA

BEST ELECTRONIC & MECHANICAL LOCKS PRICE LIST 62 GSA

Title Note: Please contact us for price information on specialty items or options not shown in this price list. Stanley Security Solutions, Inc. reserves the right to make changes in designs and specifications or to make additions or improvements to its products without notice and without incurring any obligation to incorporate them on products previously manufactured. 2

Price List Index Sales Policies 4 Warranty 6 Architectural Finishes 7 BEST Standard & Premium Keys 8 BEST Peaks Keys 9 BEST Preferred Patented Keys 10 BEST CORMAX Patented Keys 11 B Padlocks 12 BEST Standard & Premium Cores 14 BEST Peaks Cores 15 BEST Preferred Patented Cores 16 BEST CORMAX Patented Cores 17 D Service Equipment 18 KRD Key Retaining Devices 22 QU-I.C-SYSTEM Combinating Tool Packages 23 E Cylinders 24 5E and 8E Utility Cylinders (Cam Locks) 26 Keystone 600N5 Key Control Software 27 45H Mortise Locks 28 47H High Security Mortise Lock 30 48H and 49H Mortise Deadlocks 31 40H Mortise Components 32 40H Strike Packages 33 40H Replacement Spindles 34 40H Faceplate Kits 35 J Semi-Trailer Kingpin Locks 36 5K Grade 2 Tubular Locks 37 6K Grade 2 Cylindrical Locks - Knobs 38 7KC Grade 2 Cylindrical Locks - Levers 39 8K Grade 1 Cylindrical Locks - Knobs 40 9K Grade 1 Cylindrical Locks - Levers 42 AK Knob Adaptations (formerly KA series) 44 L Cabinet Locks 45 P Push Locks 46 S Sliding Door Locks 47 SPSL Stanley Patient Safety Lever 48 SSRL STANLEY Seclusion Room/Time Out Room Locks 50 T Tubular Deadbolts 51 SEDA STANLEY Emergency Door Alarm 52 W Electric Switch Locks 53 45HW Electromechanical Mortise Locks 54 47HW High Security Electromechanical Mortise Locks 55 8KW/9KW Electromechanical Cylindrical Locks 56 Electromechanical Lock Accessories 58 Electronic Lock Software & Accessories 59 45HZ Keypad EZ Mortise Locks 61 9KZ Keypad EZ Cylindrical Locks 62 EXZ Keypad EZ Exit Trim 63 45HG B.A.S.I.S. G Mortise Locks 64 9KG B.A.S.I.S G Cylindrical Locks 65 EXG B.A.S.I.S G Exit Trim 66 45HBV B.A.S.I.S V Mortise Locks 67 9KBV B.A.S.I.S V Cylindrical Locks 69 EXBV B.A.S.I.S V Exit Trim 70 45HM IDH MAX Mortise Locks 71 9KM IDH MAX Cylindrical Locks 73 STANLEY ID Express Station 74 STANLEY DataLink Services 75 STANLEY Wi-Q Technology Wireless Access Management Software & Accessories 76 BEST 45HQ Wireless Mortise Locks With STANLEY Wi-Q Technology 78 BEST 9KQ Wireless Cylindrical Locks With STANLEY Wi-Q Technology 80 BEST EXQ Wireless Exit Trim With STANLEY Wi-Q Technology 81 BEST Wireless Conversion Kits With STANLEY Wi-Q Technology 82 Electronic Lock Inside Escutcheon Conversion Kits 83 3

Sales Policies TERMS AND CONDITIONS OF SALE The terms and conditions contained in this catalog shall govern the sale of all products priced herein. Stanley reserves the right to refuse any orders as well as the right to sell or not to sell to any firm at our sole discretion. The acceptance of any order is expressly made conditional upon your assent to these Terms and Conditions of Sale. PRICES: All previous prices are superseded by this List Price. All prices are subject to change without notice. Complete prices for all key operated locks include a combinated core and one (2) operating key. Orders for users outside the continental United States will be by quotation from the International Department to cover any additional import duties, freight, communications, and insurance cost. All orders will be filled at prices in effect at the time of order. All prices are subject to change without notice. List prices do not include taxes, shipping or handling charges. Stanley Patient Safety Lever (SPSL) / Stanley Emergency Door Alarm (SEDA) / Stanley Seclusion Room Lock (SSRL) PRODUCT QUOTES: Normal discount structures do not apply to the published list prices for SPSL, SEDA or SSRL products. Net price quotes for these products must be obtained from the local Stanley Sales Representative. In the case of SEDA, two (2) quotes will be provided: one for product only, and another for product and installation as it is highly recommended a trained Stanley technician installs this product to ensure trouble-free performance. ORDERS: Stanley Security Solutions, Inc ( Stanley ) reserves the right to decline orders in which the price or quantity of goods is not satisfactory. Stanley will not be bound to fill any orders unless or until they have been accepted in writing by an authorized representative of Stanley. Stanley will accept orders via phone, email, fax or courier. Note: Receipt or possession of this price book does not grant approval to quote or purchase Stanley products. Please contact your Stanley Sales Representative for further details. KEYING SYSTEM ORDERS: All orders of keying systems specifying delayed fulfillment must be fulfilled within twelve (12) months of the order date. Said request for fulfillment must include complete keying instructions for the order to be acknowledged with an estimated delivery date. Failure to properly request fulfillment of the order within twelve (12) months of the order date will make the order void and nonrefundable. SPECIAL ORDERS: Any modification to a standard product configuration is considered a special order. No credits will be issued for returned special orders unless authorized by Customer Service (800) 711-6814. PHONE ORDERS: Accuracy of phone orders will be determined by receipt of a written confirmation or acceptance of our acknowledgment. INCOMPLETE ORDERS: An incomplete order is one that is not fully specified according to the appropriate nomenclature required for that product. Any incomplete order will not be entered and will be referred to the appropriate Stanley Sales Representative for resolution. HARDWARE SCHEDULES: A hardware schedule is a listing of all builders hardware items related to a particular construction job. It is approved by the architect, then submitted to dealers, bidders, and contractors. An acceptable hardware schedule of Stanley products is one in which the material ordered is compatible for installation as required in the schedule. SAMPLES: Please contact your local Stanley Sales Representative for sample requests. SPLIT FINISHES: When ordering locksets with split finish (outside finish different from inside), specify the outside finish first, then the inside finish. Specify the hand of the door so the proper face and strike plate finish may be supplied; otherwise, the finish will be supplied for doors opening inward. CHANGES/CANCELLATIONS: After orders are entered for manufacturing, changes or cancellations cannot be accepted without our permission, and may be subject to a change or cancellation charge equivalent to 30% of the purchased price. MINIMUM CHARGE: The expense of handling an order necessitates a minimum charge of $50.00 net per invoice. TERMS: 2% 15, Net Thirty (30) days. Stanley reserves the right to add a service charge to all invoices past due. International sales are accepted with a confirmed irrevocable letter of credit. DELIVERY: We endeavor to make prompt shipment of all orders, but we shall not be held responsible for any loss or damage resulting from delay in filling orders, including any direct or consequential loss or damages, resulting from an inability or delay in meeting shipping schedules. SHIPPING/FREIGHT ALLOWANCES: All shipments are F.O.B. factory via carrier Stanley selects. Goods in transit are at the risk of the buyer. Single or combined shipments including Stanley lock sets, exit devices, and door closers will be considered for free freight with orders at or above $6,000 net (product combination must be on same purchase order). These freight terms apply only to a single destination within the contiguous United States. 4

Sales Policies (continued) CONSTRUCTION CORES: All keyed locks shipped from Stanley for new construction projects in which cores have been ordered will receive disposable black plastic (non-keyed) construction cores at no additional charge. Disposable black plastic cores for less-core orders may be purchased separately for $1.50 net. Brass (keyed-alike) construction cores may be purchased for a net price of $8.00 each. No further discount will be applied. Brass construction cores shall be 7-pin, A keyway, and have a GREEN face. Brass construction cores are shipped with one operating key per ten (10) cores and one control key per twenty (20) cores; additional keys may be purchased for $4.40 list. Construction cores do not have the degree of security that the owner s permanent masterkeyed cores provide. Construction cores are used for controlling access to premises during construction and ARE NOT INTENDED FOR USE WHEN PREMISES ARE OCCUPIED OR FURNISHED IN ANY MANNER. When increased security is needed please contact your local Stanley sales office for masterkey services. Return of construction cores: Brass construction cores may be returned for a $2.50 credit per re-usable core to be applied toward the next purchase. A Returned Goods Authorization (RGA) must be obtained and accompany the returned material. Stanley is not responsible for collection or return of construction cores. MASTERKEYING: Stanley Masterkey Policies and Services can be found at www.bestaccess.com. EXPORT REGULATIONS: Purchaser agrees to conform to, and abide by, the export laws and regulations of the United States, including, but not limited to, the Export Administration Act of 1979 as amended and its implementing regulations. Diversion contrary to US laws and regulations is prohibited. CLAIMS: All claims due to errors or defects must be submitted, in writing, within thirty (30) days after receipt of goods. When Stanley is responsible, adjustments will be made. PROPER INSTALLATION: Current installation instructions for any Stanley product should be carefully followed for proper operation of the installed unit. If improperly installed, malfunction of the unit may result. BACK CHARGES: Stanley is not responsible for, does not authorize, and will not accept any back charges for the cost of any labor or material incurred by anyone other than Stanley for any repair, service, installation or replacement unless approved with Stanley s prior written consent. RETURNED GOODS: Customer has up to ninety (90) days from date of invoice to return goods, except for warranty returns. Stanley Customer Service MUST authorize all returns. All materials returned to Stanley, regardless of the reason, must have a correct Return Goods Authorization (RGA) number applied to the outside of the shipping carton. All goods must be returned in original packaging and be in resalable condition except for warranty returns. Transportation charges of returned goods must be prepaid by the customer. A re-stocking charge of 30% of the purchase price will be applied to the customer s account except for warranty returns. All goods must be returned within sixty (60) days of RGA issue date. Product not returned in saleable condition or after sixty (60) days of the RGA number issue date is subject to disposal by Stanley with no credit issued. Use fax number 888-214-1918 for returned goods authorization only. PRODUCT WARRANTY Upon return of a defective product, Stanley shall either replace the product or refund the purchase price, at our discretion, in accordance with our standard warranty. Stanley is not responsible for incidental or consequential damages. Some states do not allow the exclusion of limitation of incidental or consequential damages, so the above exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state. 5

Warranty LIMITED WARRANTY Except as otherwise provided below, STANLEY warrants that all Products manufactured by STANLEY and sold under its trade names BEST and STANLEY are free of defects in materials, workmanship and operation, normal wear and tear excepted, for a period of three (3) years from the date of sale to the original purchaser. The liability of STANLEY under this warranty is limited to the repair or replacement of any Product covered by the warranty. Written notice of a claim under this warranty should be mailed to STANLEY SECURITY SOLUTIONS, P.O. Box 50444, Indianapolis, IN 46250. The notice should include information as to the identity of the Product and its defect along with a customer contact name, company name, address, and phone number. STANLEY will then provide shipping directions, with all shipping charges prepaid by you. STANLEY will then cause the Product to be examined and, if found defective and covered under this warranty, will repair or replace said Product at the sole discretion of STANLEY. Warranty service shall only be provided in the United States. 9K Mechanical Cylindrical Lock warranty term shall be seven (7) years from the date of sale to the original purchaser. 45H/47H Mechanical Mortise Lock Warranty term shall be limited lifetime. 48H/49H Mortise Deadlock and all 45HW and 47HW Electromechanical Mortise Lock warranty term shall be five (5) years from the date of sale to the original purchaser. BEST 93KQ, 45HQ and EXQ locks using the Stanley Wi-Q Wireless Technology shall be three (3) years from the date of sale to the original purchaser. Stanley Portal Gateways, Wireless Access Controllers, Antennas and other products using Stanley Wi-Q Wireless Technology not specifically mentioned shall be one (1) year from the date of sale to the original purchaser. SOFTWARE: NT500, Stanley Wi-Q Technology, and B.A.S.I.S. Software Warranty - STANLEY warrants that all CD ROM and hardware keys shall be free from defects in material and workmanship and will function in substantial accordance to the specifications for a period of one (1) year from the date of installation. Specific Limitations: The warranty for all NT500, Stanley Wi-Q Technology, and B.A.S.I.S. Software Products does not cover, free-of-charge, any post-sales technical support during the warranty under the following circumstances: Calls from sub-contractors not authorized by STANLEY Problems caused by misuse of software or hardware. Failure to provide a network connection or site phone line for a modem connection, if deemed necessary by STANLEY. Technical support for third party software or hardware products. Technical support for network software products. Support for the items above during normal technical support hours will be provided at an hourly rate of $150, billable in one (1) hour increments. For pre-arranged, after-hours support, please call for quote. GENERAL LIMITATIONS OF WARRANTY This warranty specifically excludes, and STANLEY shall not be held responsible for, damage caused by Product malfunction or failure attributable to acts of God, improper use or installation, poor or no maintenance, work performed by other than an Authorized STANLEY technician; failure to follow STANLEY s operating instructions or environmental specifications, modification, vandalism, shipping and/or handling, improper storage, accident, abuse or any other cause not within the control of STANLEY other than ordinary wear and tear. STANLEY provides no warranty or guarantee that its cores and/or cylinders will function properly or be mechanically compatible with products not manufactured by STANLEY. Third Party Warranty Except as otherwise provided above, STANLEY makes no warranty, express or implied, with regard to third party hardware or software and expressly disclaims the implied warranties or conditions of merchantability or, merchantable quality, fitness for a particular purpose, title, infringement and those arising by statute or otherwise in law. Customer s sole recourse for warranty claims is with the manufacturer of the Product. However, STANLEY agrees to pass through any third party warranty that STANLEY receives from the manufacturer of the Products to buyer. The extent of any third party warranty details, terms and conditions, remedies and procedures may be expressly stated on, or packaged with, or otherwise accompanying the Products. EXCEPT AS SET FORTH HEREIN, STANLEY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, AND BUYER ACKNOWLEDGES THAT NO REPRESENTATIONS, WARRANTIES, PROMISES OR STATEMENTS HAVE BEEN MADE BY STANLEY, WITH RESPECT TO THIS PRODUCT, OR ANY PART OR PORTION THEREOF. IN ADDITION, STANLEY MAKES NO WARRANTY OF MERCHANTABILITY OF THIS PRODUCT OR ANY PART OR PORTION THEREOF, FOR ANY PURPOSE, NOR ANY WARRANTY WHICH EXTENDS BEYOND THE DESCRIPTION ON THE FACE HEREOF. STANLEY SHALL NOT, IN ANY EVENT, BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES SUFFERED BY BUYER OR ANYONE CLAIMING BY, THROUGH OR UNDER BUYER, AS A RESULT OF THE CONDITION OF THIS PRODUCT, OR ANY PART OR PORTION THEREOF, AND THERE ARE NO ORAL OR WRITTEN UNDERTAKINGS OR AGREEMENTS OF ANY TYPE PROVIDED BY STANLEY EXCEPT AS EXPRESSLY SET FORTH HEREIN. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR PROHIBIT THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSIONS MAY NOT APPLY IN YOUR STATE 6

Architectural Finishes BHMA U.S. No. No. Description 605 3 Bright brass, clear coated 606 4 Satin brass, clear coated 611 9 Bright bronze, clear coated 612 10 Satin bronze, clear coated 613 10B Oxidized satin bronze, oil rubbed 618 14 Bright nickel plated, clear coated 619 15 Satin nickel plated, clear coated 622 19 Flat black, coated 625 26 Bright chromium plated 626 26D Satin chromium plated 627 27 Satin aluminum, clear coated 628 28 Satin aluminum, clear anodized 629 32 Bright stainless steel 630 32D Satin stainless steel 690 20 Dark bronze coated 7

BEST Standard & Premium Keys 1A 1 A 1 Key Shape (Bow) Key Type Keyway Cut Code Key Stamp 1A Standard 1AP Premium 2A Large round 3A Large rectangular 4A Access bow 9A Blockout blade 0 Blockout blade 1 Operating or blank 2 Control 3 Master 4 Submaster 5 Grandmaster 9 Extractor key Designate 1 Blank specific keyway 2 Cut (A, E, etc.) or 4 Special A4 multiple keyways if ordering a multimilled key. KS654 x KS292 BEST logo B* Long blade (1A only) full embossing with stars (1A & H* No hole (2A only) 1AP only) N* Long nose (1A only) KS112 U.S. Gov t do not NKW No keyway designation duplicate" (standard on 1AP) KS567 Premium P* Plastic insert (4A only) S* Key serialization Specify KS#. Price for most custom design stamps available upon request. *Indicates extra cost option; see below. If keys are cut, you must specify keymark and number of each marking. Description 1A Blanks Operating-cut Control, Master, SM or GM-cut 2A, 3A & 4A Blanks Operating-cut Control, Master SM or GM-cut 9A Blockout blades (9A0) Extractor key (9A9) Premium 2.20 0.96 4.74 3.33 6.77 4.51 Standard 1.97 4.51 6.21 6.21 4.74 6.21 4.74 1A Standard 1AP Premium *Extra cost options Option code Add-on Double milling 1.47 Triple milling 2.43 Specific keyways Quadruple milling 3.72 Five milled 5.08 Long blade (1A only) B 1.47 No hole (2A only) H 0.96 Long nose (1A only) N 2.93 Plastic insert (4A only) P 1.47 Key serialization / key S 0.96 1A Long blade (B)* 9A0 Blockout blade 9A9 Extractor key* 1A Long nose (N)* 2A 3A 4A* 8

BEST Peaks Keys BEST Peaks Keying System s patent expired on June 8, 2010 making the system vulnerable. It is highly recommended BEST Peaks keys/cores be replaced with BEST CORMAX Patented or Preferred Patented keys/cores to ensure patented key control. 1AK 1 B1 1 7 150 Key Shape (Bow) Key Type Keyway Cut Code Pin Size Key 1AK Patented 9AK Blockout blade 0 Blockout blade 1 Operating 2 Control 3 Master 4 Submaster 5 Grandmaster 9 Extractor key B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 1 Blank 2 Cut 6 6-pin (140 & 150 series) 7 7-pin (150 series only) 140 = 1CK cores 150 = 1CB cores 150 140 N* Long nose (6-pin only) CS* Custom stamp for key bow *Indicates extra cost option; see below. If keys are cut, you must specify keymark and number of each marking. Description Patented 1AK Patented blanks 3.78 Operating-cut 8.46 Control, Master, SM or GM-cut 9.59 9AK Blockout blade (9AK0) 32.16 Extractor key (9AK9) 32.16 *Extra cost options Long nose cut blade (6-pin only) One-time die stamping cost (Note1) List price add-on per key blank (Note 2) Option code N CS Add-on 15.80 485.78 0.85 Note 1: Graphics and company logos are available upon request. Note 2: Minimum 200 key blanks per order. 9

BEST Preferred Patented Keys 1AF 1 1P 1 7 Key Shape (Bow) Key Type Keyway Cut Code Pin Size 1AF Preferred Patented 9AF Preferred Blockout Blade 0 Blockout blade 1 Operating 2 Control 3 Master 4 Submaster 5 Grandmaster 9 Extractor key 1P 2P 7P 8P 9P 10P 1 Blank 2 Cut 7 7-pin (150 series 1CF cores only) N* Long nose (6-pin only) CS* Custom stamp for key bow *Indicates extra cost option; see below If keys are cut, you must specify keymark and number of each marking Description Patented 1AF Patented blanks 3.95 Operating-cut 8.46 Control, Master, SM or GM-cut 10.16 9AF Blockout blade (9AF0) 32.16 Extractor key (9AF9) 32.16 *Extra cost options Long nose cut blade (6-pin only) One-time die stamping cost (Note1) List price add-on per key blank (Note 2) Option code N CS Add-on 15.80 485.78 0.85 Note 1: Graphics and company logos are available upon request. Note 2: Minimum 200 key blanks per order. Note: Best Preferred series keyways are backwards compatible with Best Peaks series keyways of the same number. 10

BEST CORMAX Patented Keys 1AM 1 X1 Key Shape (Bow) Key Type Keyway 1AM M series key 1AX X series key 2AM Large round 3AM Large rectangular 4AM Access bow 9AM Blockout blade 9AX Blockout blade 0 Blockout blade 1 Operating or blank 2 Control 3 Master 4 Submaster 5 Grandmaster 9 Extractor key MJ MK ML MM X1..X32, etc. 2 Level 1 (W) Nonexclusive 2 Cut 1 Blank 2 (X) Two-digit zipcode exclusive 3 (Y) One digit zipcode exclusive 4 (Z) National exclusive 1 Cut Code KS716 Key Stamp KS699-1AX Back KS716-1AM Front KS717-1AM Front KS800-1AM Back B* Long blade (1AM series only) H* No hole (2AM series only) N* Long nose (1AM series only) S* Key serialization *Indicates extra cost option; see below. Designate multiple keyways if ordering a multi-milled key. If keys are cut, you must specify keymark and number of each marking. Description CORMAX 1AM Blanks 1.86 Operating-cut Control, Master, SM or GM-cut 4.18 5.25 1AX Blanks 1.86 Operating-cut 4.18 Control, Master, SM or GM-cut 5.25 2AM, 3AM & 4AM Blanks 1.97 Operating-cut 4.80 Control, Master SM or GM-cut 6.77 9AM & 9AX Blockout blades (9AM0) (9AX0) 5.30 Extractor key (9AX9) (9AM9) 5.30 Notes: 1 M keyways are backward compatible with sandard keyways of the same letter. 2 X series keyways are not backward compatible. 3 Please contact factory for information regarding all security levels for the "M" and "X". Levels 2, 3, and 4 require Masterkey Dept authorization. 4 Match key keyway level to core keyway level. *Extra cost options Double milling Quadruple milling Long blade (1AM only) No hole (2AM only) Long nose (1AM only) Key serialization / key Option code Specific keyways B H N S Add-on 1.47 3.72 1.47 0.96 2.93 0.96 11

B Padlocks 41B Shackle Diameter 11B Brass 1/4" dia. 21B Brass 5/16" dia. 41B Brass 3/8" dia. 12B Aluminum 1/4" dia. 22B Aluminum 5/16" dia. 42B Aluminum 3/8" dia. 7 Core Housing 7 7-pin housing; accepts all BEST cores 2 Shackle Height Steel shackle 2 3/4" 21 1" w/ shroud (21B only) 22 1 1/2" 72 2" 82 4" Bronze shackle (brass padlock only) 0 3/4" 20 1 1/2" 70 2" 80 4" L Function T Key retained L Nonkey retained Chain Option M Case drilled for clevis only M1* Bronze chain (available for brass padlocks only) M5* Galvanized steel chain Special Stamp No. Blank Best logo PS1010 Safety first (11B & 21B) (Available for brass padlocks only) Specify PS# or describe stamp. (Available for brass padlocks only.) Price for special stamps available upon request. F3 Frangible shackle (11B720 only) O* Lockout/tagout S* Car seal (41B only) ZZ* Double lockout (11B only) XSPL* Cut resistant shackle (21B & 22B & 41B & 42B only) WC* Weather cover (21B & 22B & 41B & 42B only) SH Shrouded padlock w/cut resistant shackle (21B only) 606* Satin Brass finish (brass only) Red Anodized finish (alum only) Black Anodized finish (alum only) *Indicates extra cost; see the last page of B. Must specify keymark and number of keys or designate L/C for less core. BRASS ALUMINUM Shackle Complete with Combinated Core Complete with Combinated Core Less Core Height Patented** Premium Standard Patented** Premium Standard Less Core 11B 3/4" 1-1/2" 2" 49.09 49.09 50.21 53.60 53.60 54.73 45.70 45.70 46.83 19.75 19.75 20.88 12B 44.01 44.01 44.57 48.52 48.52 49.09 40.62 40.62 41.19 14.67 14.67 15.23 4" 21B 52.47 56.98 49.09 23.13 46.26 22B 50.78 42.88 16.93 3/4" 49.65 54.16 46.26 20.31 44.57 49.09 41.19 15.23 1-1/2" 2" 49.65 50.78 54.16 55.29 46.26 47.39 20.31 21.44 44.57 45.14 49.09 49.65 41.19 41.75 15.23 15.80 4" 53.03 57.55 49.65 23.70 46.83 51.34 43.44 17.49 41B 42B 3/4" 1-1/2" 50.21 50.21 54.73 54.73 46.83 46.83 20.88 20.88 45.14 45.14 49.65 49.65 41.75 41.75 15.80 15.80 2" 51.34 55.86 47.96 22.00 45.70 50.21 42.32 16.36 4" 54.16 58.68 50.78 24.82 47.39 51.91 44.01 18.05 21B with Shroud* 1" 68.83 73.35 65.45 39.49 *Pricing includes stainless steel shroud and cut-resistant shackle. Must include "SH" option when ordering **Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. Note: 626 finish is standard on brass padlocks series. Clear anodized finish is standard on aluminum padlock series. 12

B Padlocks (continued) Description Cable Padlocks Catalog Number Complete with Combinated Core Patented Premium Standard Less Core Jacketed 24" cable 21JB7-24T 57.55 62.06 54.16 28.21 Jacketed 36" cable 21JB7-36T 60.37 Jacketed 48" cable 21JB7-48T 63.19 Extra cable per ft. or fraction thereof jacketed Add-on 2.96 64.88 67.70 2.96 56.98 31.03 59.81 33.85 2.96 2.96 *Extra cost options Bronze chain Galvanized steel chain Lockout / tagout Padlock weather covers (21B-41B only) Cut resistant shackle Car seal slot (41B only) Satin Brass Finish Double lockout (11B only) Option code M1 M5 O WC XSPL S 606 ZZ Add-on 3.53 5.50 4.23 2.40 8.46 6.77 6.77 7.90 Accessories Catalog number Price Frangible shackle kit* Frangible shackle only *Includes: padlock disassembly tool, three shackles and springs. 11B2OFK 68.83 11B2OFF 3.53 Repairs Includes all new parts, even a shackle, if necessary, but not a core or a new chain. Price 11B 12.98 21B 12.98 41B 12.98 Note: Chain options are not available on cable padlocks or padlocks with shroud. M1 M5 13

BEST Standard & Premium Cores 1C 7 A 1 606 Core Type Core Size Keyway Combinating Code Finish 1C Standard 1CD Drill resistant 1CDP Drill resistant Premium 1CP Premium 2C** Core for 8L mailbox 3C Core for 8E cylinder 5C** High security 6C Core for 4S cylinders 6CP Premium core for 4S cylinder 5 5-pin (1C only) 6 6-pin (1C only) 7 7-pin Designate specific keyway (A, E, etc.) 1 Uncombinated 2 Combinated B* Pick & drill resistant (1CD only) K* Key trap (1C only) P* Pick resistant T* Key retained (6C & 6CP only) W* Wear resistant 605 606 611 612 613 625 626 690 *Indicates extra cost option; see below. **Requires long blade key. If combinated, you must specify keymark and number of keys. Description 1C & 1CP Combinating Code Premium Standard Uncombinated 1 20.88 16.93 Combinated 2 33.85 25.95 1CD & 1CDP Uncombinated 1 38.37 34.98 Combinated 2 51.34 43.44 2C & 3C Uncombinated 1 18.62 Combinated 2 27.65 5C Uncombinated 1 25.95 Combinated 2 34.42 6C & 6CP Uncombinated 1 22.57 18.62 Combinated 2 35.54 27.65 *Extra cost options Option code Add-on Pick and/or drill resistant B, P 9.03 Key trap (1C only) K 4.23 Key retained T 4.23 Wear resistant W 4.23 Part Description Part Number Quantity Price Per Pkg. Per Pkg. Standard pin segments A0, A1 etc. 100 4.01 Spool pin segments (Note 1) A6, A7, etc. 100 4.40 Stainless steel segments A0, A1, etc. 100 20.88 Core caps (500 per pkg.) 21C 500 5.36 Core springs (500 per pkg.) 22S 500 14.11 1C 7-pin 3C 2C (Requires long blade) key) 5C (Requires long blade key) Note 1: Standard spool pin segments are available in the following sizes: A6; A7; A8; A9; B6; B8; B10; C3; C4; C5; C6; D6; D8; E3; E4; E5; F6; F7; & F8. (B6 spool pin segments should not be used with 5C core.) 6C 6CP 14

BEST Peaks Cores BEST Peaks Keying System s patent expired on June 8, 2010 making the system vulnerable. It is highly recommended BEST Peaks keys/cores be replaced with BEST CORMAX Patented or Preferred Patented keys/cores to ensure patented key control. 1CB 7 B1 1 626 Core Type Core Size Keyway Combinating Code Finish 1CB 150 Patented 1CK 140 Patented 6 6-pin (140 & 150 series) 7 7-pin (150 series only) B1 B6 B2 B7 B3 B10 1 Uncombinated 2 Combinated 626 Simulated 606 Simulated 612 Simulated 613 Simulated Style 3840 - BEST I/C 6 pin 140 series See the list below for other options. *If combinated, you must specify keymark and number of keys. 1CB Cores Description Interchangeable cores BEST I/C 6-pin brass 150 BEST I/C 7-pin brass 150 Combinated 38.93 38.93 Uncombinated 23.70 23.70 1CK Peaks Patented Cores Style Description Interchangeable cores 3840 BEST I/C 6-pin brass 140 Conventional cylinders (KIK = Key in Knob) 3404 Corbin Russwin CK4200 grade, 1 knob & UT5200 unit lock 3406 Arrow, LSDA, Schlage 06 kit includes 2 security bushings, 3 faced tailpieces 3408 Sargent 7, 8 & 9 line knob Combinated Uncombinated 38.93 23.70 46.83 46.83 46.83 31.60 31.60 31.60 3410 Sargent Kit for 6,10, 65 line and 2000 exit device line; includes security bushing and 2 fixed tailpieces (Use A and E bottom pins only) 3454 Yale 5300 grade 2 & 5400 grade 1 knob 3455 Corbin Russwin CL3900 & Yale 5400LN grade 1 lever 3476 Sargent 7600 Integra Lock 46.83 46.83 46.83 46.83 31.60 31.60 31.60 31.60 3495 Falcon, Sargent & Weiser cyl. kit for small dia. plug faces; 3 fixed & 3 lost motion tailpiece (Use J or K bottom pins only) 46.83 31.60 3499* Peaks Universal 99 cyl. kit includes 3 fixed & 3 lost motion tailpieces (Use J or K bottom pins only) 46.83 31.60 *The 3499 universal cylinder should be used for all Key-in-Knob applications except Falcon, Sargent, & Weiser locks, and specialty applications listed above. Refer to the BEST Peaks Technical Manual for various KIK Tailpiece Configurations. Removable core 6140 6-pin Corbin Russwin R/C 6240-6 6-pin Yale R/C 6240-7 6-pin for 7-pin housing Yale R/C 6340 6-pin Medeco R/C 6440 6-pin Schlage R/C 6540 6-pin Sargent R/C 51.91 51.91 34.98 34.98 51.91 34.98 51.91 34.98 54.16 38.93 51.91 34.98 15

BEST Preferred Patented Cores 1CF 7 1P 1 626 Core Type 1CF 150 Patented 1CDF - 150 Drill Resistant Patented 1CKF 140 Patented 3CF - Core for 8E Cylinder 150 6CF - Core for 4S Cylinders 150 Core Size Keyway Combinating Code Style Finish 6 6-pin (140 series only) 7 7-pin (150 series only) 1P 7P 9P 2P 8P 10P 1 Uncombinated 2 Combinated See list below for style options B* Pick & drill resistant (1CDF only) K* Key trap P* Pick resistant T* Key retained (6CF only) W* Wear resistant 626 Simulated 606 Simulated 612 Simulated 613 Simulated *Indicates extra cost option; see below If combinated, you must specify keymark and number of keys. 1CF, 1CDF, 3CF, and 6CF Preferred Patented Cores Description Interchangeable cores 1CF - BEST Preferred I/C 7-pin brass 150 series 1CDF - BEST Preferred drill resistant I/C 7-pin brass 150 series 3CF - BEST Preferred I/C for 8E cylinder 7-pin brass 150 series 6CF - BEST Preferred I/C for 4S cylinder 7-pin brass 150 series Combinated Uncombinated 40.62 27.08 49.65 36.11 45.14 29.90 45.14 29.90 1CKF Preferred Patented Cores Style Description Combinated Interchangeable cores 3840 BEST I/C 6-pin brass 140 42.88 Conventional cylinders (KIK = Key in Knob) 3404 Corbin Russwin CK4200 grade, 1 knob & UT5200 unit lock 45.70 3406 Arrow, LSDA, Schlage 06 kit includes 2 security bushings, 3 faced tailpieces 45.70 3408 Sargent 7, 8 & 9 line knob 45.70 Uncombinated 27.65 31.03 31.03 31.03 3410 Sargent Kit for 6,10, 65 line and 2000 exit device line; includes security bushing and 2 fixed tailpieces (Use A and E bottom pins only) 45.70 31.03 3454 3455 3476 Yale 5300 grade 2 & 5400 grade 1 knob Corbin Russwin CL3900 & Yale 5400LN grade 1 lever Sargent 7600 Integra Lock 45.70 45.70 45.70 31.03 31.03 31.03 3495 Falcon, Sargent & Weiser cyl. kit for small dia. plug faces; 3 fixed & 3 lost motion tailpiece (Use J or K bottom pins only) 45.70 31.03 3499* Peaks Universal 99 cyl. kit includes 3 fixed & 3 lost motion tailpieces (Use J or K bottom pins only) 45.70 31.03 *The 3499 universal cylinder should be used for all Key-in-Knob applications except Falcon, Sargent, & Weiser locks, and specialty applications listed above. Refer to the BEST Peaks Technical Manual for various KIK Tailpiece Configurations. Removable core 6140 6-pin Corbin Russwin R/C 51.91 34.42 6240-6 6-pin Yale R/C 51.91 34.42 6240-7 6-pin for 7-pin housing Yale R/C 51.91 34.42 6340 6-pin Medeco R/C 51.91 34.42 6440 6-pin Schlage R/C 53.60 38.37 6540 6-pin Sargent R/C 51.91 34.42 Extra Cost Option Code Add-on Pick and/or drill resistant B, D, P 9.03 Key Trap K 4.23 Key Retained T 4.23 Wear Resistant W 4.23 16

BEST CORMAX Patented Cores 1CM Core Type 7 X1 3 1 Core Size 1CM CORMAX Core M 6 6-pin (1CM 1CX CORMAX Core X only) 1CDM CORMAX Drill resistant (M 7 7-pin only) 1CDX CORMAX Drill resistant (X only) 5CM*** CORMAX for High security (M only) 6CM CORMAX Core for 4S cylinder (M only) Keyway MJ MK ML MM X1..X32, etc. Combinating Level Code 1 (W) Nonexclusivbinated 1 Uncom- 2 (X) Two-digit 2 Com-binated zipcode exclusive 3 (Y) One digit zipcode exclusive 4 (Z) National exclusive B* Pick & drill resistant (1CDM or 1CDX only) K* Key trap (1CM only) P* Pick resistant T* Key retained (6CM only) W* Wear resistant 626 Finish 605 606 611 612 613 625 626 690 *Indicates extra cost option; see below. If combinated, you must specify keymark and number of keys. Description Combinating Code CORMAX 1CM & 1CX Uncombinated 1 20.88 Combinated 2 29.34 1CDM & 1CDX Uncombinated 1 29.90 Combinated 2 38.37 5CM Uncombinated 1 28.21 Combinated 2 35.54 6CM Uncombinated 1 22.57 Combinated 2 31.03 Note: 1 M keyways are backward compatible with standard keyways of the same letter 2 X series keyways are not backward compatible 3 Please contact factory for information regarding all security levels for the "M" and "X". Levels 2, 3, and 4 require Masterkey Dept authorization. 4 Match key keyway level to core keyway level. *Extra cost options Pick and/or drill resistant Key trap Key retained Wear resistant Option code B, D, P K T W Add-on 9.03 4.23 4.23 4.23 17

D Service Equipment The security items in this series are available only to registered BEST Masterkey System owners. This restriction is for the purpose of avoiding proliferation of equipment that could be used to compromise the security of such systems. Description AD Key Equipment Key combinator (Standard & CORMAX) Key combinator Premium Key carriage (Standard & CORMAX M series keyways) Key carriage Premium Key combinator system conversion Key cut indicator (in CD431 Kit) Key calibrator (mechanical) Key calibrator (digital) Key stamping plate (55 standard keys) BD Padlock Equipment Assembly kit complete Tweezers 6" (in BD640 Kit) Shackle plug tool (in BD640 Kit) Holding plate (in BD640 Kit) Rivet flaring tool Storage hook (41B & 61B) Padlock disassembly tool (11B, 21B, 41B) Lockout Lockout ties (pkg. of 50) Lockout name tag Lockout / tagout Corroson-free aerosol lubricant CD Core Equipment Combinating kit complete Combinating bin Core stamping plate face only (87 cores) Core stamping plate side only (50 cores) Core capping / decapping press Graphite gun Graphite 1 lb. container Core capping / decapping block for 1C 150 (in CD431 Kit) Hand capping pin for use with capping block (in CD431 Kit) Ejector pin (in CD431 Kit) Tweezers 3" (in CD431 Kit) Combinating bin kit DD Combinating Equipment Letter dies 1/16" or 3/32" Number dies 1/16" or 3/32" Core / key marking block (1 core & key) Core / key marking plate (5 cores & 10 keys) Catalog Number AD433* AD433P* AD434 AD434P Call to Order AD501* AD502 AD502D AD504A Price 2,255.67 2,589.11 350.37 291.13 289.43 15.23 360.52 926.42 797.78 BD640 187.88 BD641 9.59 BD642 135.41 BD643 43.44 BD650 113.40 BD651 6.77 BD654 78.99 BD655 8.46 BD656A 14.11 BD657 2.96 BD658 2.96 BD660 11.85 CD431* CD433 CD504B CD504C CD517 CD535 CD535A CD540 CD547 CD548 CD549 CD435 447.41 179.42 797.78 797.78 1,211.34 12.98 23.13 90.27 10.16 6.77 2.51 903.85 DD502 113.40 DD503 38.93 DD513 90.27 DD514 232.45 Magnetic strip (2 ea. in DD514) DD514A 2.12 LPS lubricant DD537 9.59 Combinating hammer with plastic head DD550 53.03 Plastic heads (for DD550) DD551 15.23 *Specify A2, A3, or A4 keying system. 18

D Service Equipment (continued) The security items in this series are available only to registered BEST Masterkey System owners. This restriction is for the purpose of avoiding proliferation of equipment that could be used to compromise the security of such systems. Description Catalog Number Price ED Cylinder Equipment Mortise cylinder wrench ED211 19.75 Mortise cylinder assembly tool ED212 34.42 Thread repair die 1E cylinder ED221 248.25 Cylinder cam testing tool ED222 20.31 3E Cylinder hole tap ED224 213.27 1E Cylinder hole tap Eurocylinder wrench 5E Combinating kit complete (Note 1) ED225 ED801 5ED250 213.27 72.22 479.01 5E Thread tap 3/4" x 24 5ED253 94.79 5E Capping block (in 5ED250 Kit) 5ED261 139.36 5E Cap depressor (in 5ED250 Kit) 5ED262 37.24 5P Capping fixture 5PD655 302.98 KA Door Adaptor Kits (Note 2) Mortise to cylindrical 1" faceplate 62KA2A 40.06 Mortise to cylindrical 1-1/8" faceplate 83KA2A 40.06 Wrap-around 2-3/8" backset (160) 62KA2B 40.06 Wrap-around 2-3/4" backset (161) 83KA2B 40.06 KD Cylindrical/Tubular Equipment 9K Throughbolt drill jig KD303 3.58 Boring jig kit complete (Note 3) KD304A 535.99 Drill bit 2-1/8" KD308 179.42 Faceplate marking chisel (160) KD312 47.39 Faceplate marking chisel (161) 1-1/8" KD315 47.39 8K Spanner wrench KD316 3.58 9K Spanner wrench KD317 3.58 Drill bit 1" x 9" Strike plate locating pin KD318 KD325 38.93 15.23 Return spring loading tool Knob Adaptation Cut-Off Fixtures For: KD340 32.16 Schlage D KD352S 91.96 Yale #5400 KD351Y 91.96 Note 1: Specify A2, A3, or A4 Keying System. Note 2: Specify the door thickness (630 finish only). Note 3: KD304A includes a boring jig and a 3/8" adapter chuck. (The boring jig and 3/8" adaptor chuck are not sold separately). 19

D Service Equipment (continued) For Servicing BEST Peaks and Preferred Cores 140 Bottom Pins A2 Bottom pins (except for 6140, 6440, & 6540 RC, and KIK cylinders) A2A0 thru A2A9 6.77 per 100 A2 Bottom pins for 6140 & 6540 RC, and KIK cylinders A2J0 thru A2J9 6.77 per 100 A4 Bottom pins (except for 6140, 6440, & 6540 RC, and KIK cylinders) A4E0 thru A4E5 6.77 per 100 A4 Bottom pins for 6140 & 6540 RC, and KIK cylinders A2 Bottom pins for 6440 removable cores 140 Top Pins A4K0 thru A4K5 A2X0 thru A2X9 6.77 6.77 per 100 per 100 A2 Top pins for all products (except 6440 removeable core) Use BEST top pins (see page 10) A4 Top pins for all products (except 6440 removeable core) Use BEST top pins (see page 10) A2 Top pins for 6440 removeable core A2W2 thru A2W19 6.77 per 100 Patent Top & Bottom Pins Patent top pins for all IC and RC cylinders Patent top pins for KIK cylinders PT1 PT2 22.00 22.00 per 100 per 100 Patent bottom pins (except for 6140, 6440, & 6540 RC, and KIK cylinders) PB1 22.00 per 100 Patent bottom pins for 6140 & 6540 RC, and KIK cylinders PB2 22.00 per 100 Timing Pins Timing pin for 6340 and 6540 RC cylinders TP6312 22.00 per 100 Segment Springs Springs for all products except Schlage 6440 RC SS4220 29.90 per 500 Springs for Schlage 6440 RC SS4010 29.90 per 500 Spring Slide Covers Spring cover for all KIK cylinders and 6440 RC SC2000 22.00 per 100 Spring cover for 6140 & 6240 RC, mortise, and rim cylinders SC2005 22.00 per 100 Spring cover for 6340 and 6540 RC cylinders SC2001 22.00 per 100 Caps for 3840 IC core Use BEST 21C caps (see page 10) C-Clips C-clip for IC and KIK cylinders C-clip for 6140 RC cylinders C-clip for 6240 RC cylinder C-clip for 6340 RC cylinder Capping Tools Staking fixture for KIK, mortise, and rim cylinders Staking fixture for IC, and all RC cylinders (except 6440 RC) Staking tool for KIK, and all RC cylinders (except 6440 RC) Staking fixture for 6440 RC cylinder Staking tool for 6440 RC cylinder Plug follower 140 & 150 key gage for both A2 and A4 Pin Kits Peaks universal A2 pin kit complete (Manufactured by KABA) Peaks universal A4 pin kit complete (Manufactured by KABA) CR4002 CR4003 CR4004 CR4005 CD6840 CD4001 CD6401 CD4003 AD4050 CD5012 CD5004 1.04 each 1.04 each 1.04 each 1.04 each CD4000 236.40 CD6440 Peaks Schlage 6440 RC A2 pin kit complete (Manufactured by KABA) CD5002 605.39 236.40 110.58 117.92 110.58 18.62 29.34 605.39 605.39 20

D Service Equipment (continued) AD Key Equipment (You must purchase directly from BEST) Key combinator Peaks 6-pin Key combinator Peaks 7-pin Key carriage Peaks 6-pin Key carriage Peaks 7-pin Capping Tools (You must purchase directly from BEST) 140 IC Capper/Decapper press 140 IC Capping block only (order CD540 for 150 IC) 140 & 150 Key cut indicator (Peaks equipment) 140 & 150 IC Capping tool (for use with capping block) All 140 keys and 150 keys using B3 through B6 keyways require a key milling machine. *Specify A2 or A4 keying system. AD436* AD437* AD436K AD437K CD517P CD540P AD4050 CD547 2,746.53 2,746.53 454.75 454.75 1,192.72 88.58 29.34 10.16 21

KRD Key Retaining Devices KRD-2 UL-KRD-2 S Device type Part number Option Description BEST core models Catalog number Price KRD-2 BEST SFIC Model KRD-2H Hybrid (Sargent LFIC/BEST SFIC Model) KRD-2H Hybrid (BEST SFIC/Schlage LFIC Model) KRD-3 BEST SFIC Dual Function Model Non-BEST Full size core models KRD-2 Corbin Russwin 6-pin LFIC KRD-2 Corbin Russwin 7-pin LFIC KRD-2 Medeco LFIC KRD-2 Sargent LFIC KRD-2 Schlage LFIC KRD-2 Yale 6-pin LFIC KRD-2 Yale 7-pin LFIC UL-KRD-2 221.73 UL-KRD-2H SAR/BEST 254.45 UL-KRD-2H BEST/SCH 254.45 UL-KRD-3 330.06 UL-CR6-KRD-2 254.45 UL-CR7-KRD-2 254.45 UL-MED-KRD-2 254.45 UL-SAR-KRD-2 254.45 UL-SCH-KRD-2 254.45 UL-YA6-KRD-2 254.45 UL-YA7-KRD-2 254.45 *Extra cost options Option code Add-on Switch S 78.42 Security seal SS 69.40 *Add option code to part number shown above. 22

QU-I.C-SYSTEM Combinating Tool Packages For Servicing BEST Standard, Premium, Peaks, Preferred, and CORMAX Cores BQDP A2 7 Example: GM 8301836 CTL 4189250 Package description System Type Core size System Code Information REQUIREMENT Dedicated BQDP Basic QU-I.C-KEY Dedicated Package PQDP Professional QU-I.C-KEY Dedicated Package A2 A2 System A4 A4 System 6 6-pin 7 7-pin YES System Grand Master and Control codes must be supplied Universal BQUP Basic QU-I.C-KEY Universal Package PQUP Professional QU-I.C-KEY Universal Package A2 A2 System A4 A4 System 6 6-pin 7 7-pin NO Code information is not necessary. Description Catalog number Price Dedicated packages These QU-I.C-KEYS are permanently factory built specifically for just one key system. Grand Master & Control codes are required. These tools are intended for long-term use by Institutional Locksmiths and others who continuously work with the same key system(s). Basic dedicated package, includes: QKD, QLT-6 or QLT-7, QTT, QCT, QTJ, and QPT (see individual components listed below). Professional dedicated package, includes all components in the basic package, plus QTA, QPP and CKT-80 (see individual components listed below). BQDP-A2/A4-pin/GM & CTL * PQDP-A2/A4-pin/GM & CTL * Basic universal package, includes: QKD, QLT-6 or QLT-7, QTT, QCT, QTJ, and QPT (see individual components listed below). BQUP-A2/A4-pin * 1,055.62 Professional universal package, includes all components in the basic package, plus QPP, QTA and CKT-80 (see individual components listed below). PQUP-A2/A4-pin * 1,264.94 Individual components Dedicated QU-I.C-KEY with viewing base (system information required) QKD-A2/A4-pin/GM & CTL 270.82 Dedicated QU-I.C-KEY tool only (system information required) QKDT-A2/A4-pin/GM & CTL 203.68 Universal QU-I.C-KEY with viewing base (specify A2 or A4 system) QKU-A2/A4 502.14 Universal QU-I.C-KEY tool only (specify A2 or A4 system) QKUT-A2/A4 199.16 QU-I.C-LOAD tool (specify 6 or 7-pin cores) QLT-6 * or QLT-7 * 207.63 QU-I.C-TEST tool QTT * 287.18 QU-I.C-CHEX Tool QCT * 47.39 QU-I.C-Tweez-jector QTJ 76.17 QU-I.C-Preamer QPT 63.75 QU-I.C-Power preamer QPP 47.39 QU-I.C-TEST Adapter (must be used with QTT) QTA 108.89 12 Position Core & key tray CKT-12 92.53 80 Position Core & key tray CKT-80 195.21 *Not compatible with the special 140. 842.91 1,053.93 Universal packages Using a blank QU-I.C-KEY and code strips you get to custom build a QU-I.C-KEY for any A2 key system that you are working with. These kits are better suited for temporary use and re-use not for long-term or continuous key system use. A4 System kits are also available. 23

E Cylinders 1E 7 4 C4 RP3 626 See Below Core Housing 0 Dummy 6 6-pin 7 7-pin housing; accepts all BEST cores Function Code See below Length Code Blank Standard 22 1-3/8" 24 1-1/2" up to 6" (See length code below) Cam or Spindle C4 Standard cam C181 Adams Rite MS cam S2 Standard spindle For a complete list of cams, see the next page. Rings RP Rim cylinder RP1 Tapered cylinder RP2 6-pin mortise RP3 7-pin mortise RP4 3E mortise For special rings, see the catalog. Finish 626 690 Satin* 606 612 613 619 Bright* 605 611 625 *Indicates extra cost; see below. Must specify keymark and number of keys or designate L/C for less core. 1-5/32" Diameter Cylinders 12E 1E 1EA 1EB 1EC 1ED /Description Standard rim Standard mortise Tapered mortise Dummy rim / mortise (0-pin only) Turn knob-rim / mortise (6-pin only) Rim / mortise with dust cover Square head mortise *Extra cost options Satin finish 606, 612, 613, etc. Bright finish 605, 611, 625, etc. Part Description Cams Standard rings Straight rings (Specify lengths.) Tapered rings (Specify lengths.) Security rings (Specify lengths.) Spindles Hex nut for 1E Standard throw pins Throw pins Adams Rite MS Cam Function or Length Code Complete with Combinated Core Patented* Premium Standard 2 55.86 60.37 4 55.86 60.37 6 55.86 60.37 02/04 A2/A4 B2/B4 71.65 76.17 C4 71.65 76.17 D4 71.65 76.17 Slabbed direct motion (7-pin only) 1EE 1EF 1EG 1EJ 1EK Slabbed lost motion (7-pin only) (Specify RH or LH hand.) Standard lost motion (Note 1) Hotel shifting cam High security UL-listed (7-pin only **) High security Non-UL (7-pin only**) E4 F4 G4 J4 K4 71.65 71.65 71.65 108.89 71.65 1E Special Length Mortise Cylinders 1-3/8" 22 66.01 Each additional 1/8" (1-1/2" to 6") 24 to 96 1.75 3E Mortise-1-1/2" diameter (7-pin**) 4 71.65 Add-on 1.78 2.60 Part Number 1EC4, etc. 1ER2, 3, 4, 5 1ER7 1ER8 1ESR 1ES2, 3 A00836 A40095 A20924 Part Price 2.20 1.92 6.21 8.46 29.34 1.92 1.75 0.23 0.23 76.17 76.17 With lock add-on 0.00 0.00 2.93 5.64 0.00 0.00 0.00 0.00 0.00 52.47 52.47 52.47 68.27 68.27 68.27 Less Core 26.52 26.52 26.52 14.11 20.31 42.32 42.32 42.32 76.17 68.27 42.32 76.17 68.27 42.32 106.63 69.40 70.53 1.75 * Patented pricing shown is for CORMAX patented keying. Add $11.28 for Best Preferred patented keying. ** Only Standard and CORMAX M keying available on 1EJ and 1EK cylinders. 68.27 62.63 1.75 68.27 42.32 36.67 1.75 42.32 Note 1: Specify the stop pin on the right or left of the cam from the back view. Length code Cyl length 22 1 3/8" 24 1 1/2" 26 1 5/8" 28 1 3/4" 30 1 7/8" 32 2" 34 2 1/8" 36 2 1/4" 38 2 3/8" 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 84 86 88 90 92 94 96 2 1/2" 2 5/8" 2 3/4" 2 7/8" 3" 3 1/8" 3 1/4" 107.3 3 1/2" 3 5/8" 3 3/4" 3 7/8" 4" 4 1/8" 4 1/4" 4 3/8" 4 1/2" 4 5/8" 4 3/4" 4 7/8" 5" 5 1/8" 5 1/4" 5 3/8" 5 1/2" 5 5/8" 5 3/4" 5 7/8" 6" 24

E Cylinders (continued) Use the following table to determine the kinds of cams available for 1E, 3E and 5E cylinders. Cams listing Cam type Cabinet 1E Cyl C224 C225 C228 C229 C235 C238 C241 C246 C248 C249 C250 C253 C500 thru C509 (C500, C501, C502, etc) A04607 A08854 A10281 A14154 Cams by cylinder type 3E Cyl 5E Cyl C2A C245 C4A C3 C2B C4B A10281 A21198 A26344 Cloverleaf C118 C161 C204 C222 C243 C254 C256 C258 C265 C281 C118 C161 Roller C142 C221 C227 C240 C251 A04533 A04533 Straight C101 C103 C110 C115 C121 C123 C124 C127 C128 C129 C130 C131 C134 C136 C137 C143 C148 C152 C162 C165 C169 C171 C173 C177 C178 C179 C181 C182 C185 C186 C187 C191 C193 C200 C203 C208 C209 C210 C211 C220 C223 C226 C231 C233 C234 C239 C242 C247 C252 C4 C127 C136 C208 C210 C3 C4 Thumbturn C140 C401 thru C450 (C401, C402, etc) Two-point C102 C114 25

5E and 8E Utility Cylinders (Cam Locks) 5E 7 A 1 C R708 4B 21 Lock Body Keyway Combinating Cam Ring Cam Type* Cam Code Motion Length Length 5E 3/4" 6 6-pin Desig-nate 1 Uncombinated A Direct R701 1 Fixed Straight 10 5/8" 7 7-pin specific B Limited 1/16" 2A Fixed offset 12 3/4" keyway (A, 2 Combinated C Lost R702 1/8" in 14 7/8" E, etc.) motion D Throw R703 3/16" 2B Fixed offset out 16 1" and so member drive R704 1/4" 3 Lost motion R705 5/16" forth in 16ths of an inch R706 3/8" R707 7/16" R708 1/2" etc. 4A Lost motion offset in 4B Lost motion offset out D Direct throw member 12 Mounting Position 3 3 o'clock 6 6 o'clock 9 9 o'clock 12 12 o'clock R Cam Direction R Right L Left 90 Degree of Rotation 90 90 180 180 360 360 626 Finish 626 Standard *See the previous page for other compatible 5E cams. If combinated, you must specify keymark and number of keys. 5E cylinders available in Standard, Premium, and CORMAX keyways. Peaks and Preferred keyways not available. Description 5E Uncombinated 5E Combinated Part Description Combinating Code 1 2 Part Number Price 28.77 38.93 Part Price Cams Slide cap 6-pin Slide cap 7-pin Cam screws Hex nut 3/4" Cam screw lock washer Rings (Specify length.) Springs (box of 500) Lock body washer 5EC1, etc. 2.23 5ECP6 0.37 5ECP7 0.37 5ECS 0.96 5EH 1.97 5ELW 0.96 5ER7 2.68 5ES1 15.23 5EW 0.96 Description Catalog Number Complete with Core Patented** Premium Standard Less Core 8EA Eurocylinders Single cylinder elliptical 1 8EA7A5 69.40 41.75 Double cylinder elliptical 1 8EA7A6 105.51 50.21 Single cylinder profile 1 8EA7E4 108.89 81.24 Double cylinder profile 1 8EA7E5* 142.18 86.89 Cylinder x turnknob profile 1 8EA7E8 108.89 81.24 Union single cylinder 2 8EA7H5 95.35 99.86 91.96 66.01 Union double cylinder 2 8EA7H6 143.87 152.90 137.10 85.19 Union cylinder x turnknob 2 8EA7H7 104.38 108.89 100.99 75.04 Union cylinder x leverturn 2 8EA7H8 132.02 136.54 128.64 102.68 *To order 8E7E5, you must specify the ring length and critical dimensions. Refer to the catalog section Cylinders. **Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. 1- Available in 606, 619, 626 finishes. 2- Available in 606, 625, 626 finishes. 5E Offset in 5E Offset out 107 ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code. Delay in unlocking for rapid emergency exit could be hazardous or even fatal. 26

Keystone 600N5 Key Control Software KS 600N 2 1 KS Key Control Software Product 600N Full install for KS600 software 600NUP Upgrade from KS600 version 3.53 to 5.11* 600N5UD Upgrade from Keystone 600N version 4.x to 5.0 600UD Upgrade from older version of KS600 version 3.52 to 3.53** 600NLU Increase the number of logins for existing KS600N Program 600NDB Add more Facility Databases to an existing KS600N program # of Logins 1 5 logins (default) 2 10 logins 3 15 logins etc. # of Databases 1 One Facility database (default) 2 Two Facility Databases 3 Three Facility Databases *To find your version click Help > About. **Only recommended for an additional upgrade to 5.0. KS KS Key Control Software 600IMP Quantity of Files to be Product Imported 600IMP Import / Price per File Imported Append of (see below) Masterkey codes and other data 1 Software Packages Software Packages KS600N complete program with 5 logins Upgrades KS600NUP version 3.53 to 5.0*** KS600UD version 3.52 to 3.53 KS600N5UD version 4.x to 5.0*** *** All 5.0 version upgrades come with 5 logins standard Price 1,943.10 973.81 257.28 307.49 *Extra cost options Number of Logins purchased with KS600N or KS600NUP Option code Add-on 10 total logins 307.49 15 total logins 614.41 20 total logins 915.70 25 total logins 1,228.26 Number of facility databases purchased with KS600N & KS600NUP Number of login upgrades purchased after installation Number of facility database upgrades purchased after installation Number of files to be imported (masterkey codes, other data)**** ****Note: Each keyway system will normally be an additional file charge. Single additional facility database KS600NLU-1 (5 additional logins) KS600NLU-2 (10 additional logins) KS600NLU-3 (15 additional logins) KS600NDB- (1 added facility db) KS600NDB- (2 additional facility db) KS600NDB- (3 additional facility db) KS600IMP-1 KS600IMP-2 KS600IMP-3 307.49 307.49 614.41 921.34 307.49 614.41 921.34 428.23 855.33 1,282.43 27

45H Mortise Locks Federal Spec. 86 ANSI 1000 45H 7 R 14 H 626 RH Core Housing Function Code Lever Style Trim Style Finish Door Hand 45H Standard mortise lock 0** Less cylinder (nonkeyed or dummy trim) 7 7-pin housing accepts all BEST cores A Office D Storeroom L Privacy N Passage R Classroom T Dormitory etc. See below 3 Solid tube/return 12* Solid tube/no return 14 Curved/return 15 Contour/angle return 16 Curved/no return 17R* Gull wing RH 17L* Gull wing LH Knobs: 4 Round Decorative* 50-91 H 2-3/4"dia. 618 626 630*** R 2-3/4"dia. 690 622 S 3-1/2" dia 626AM* 630AM* J* wrought Satin* M* forged 606 612 N* forged 613 619 (concealed Bright* cylinder; N trim 605 611 invalid on nonkeyed and double 625 629*** keyed functions) RH RHR LH LHR 7/8"* 7/8" lip-to-center strike LL* Lead lined MNT* Mounted sample SH* Security head screws Thick Door* Specify thickness if other than 1-3/4" TAC/B* Tactile both levers/knobs TAC/O* Tactile outside lever/knob TAC/I* Tactile inside lever/knob VIN* Visual Indicator VT* Vandal trim *Indicates extra cost option **Indicates cost deduction. Must specify keymark and number of keys or designate L/C for less core. Function Complete with Combinated Core Function Code Description Patented* Premium Standard Less Core Single Keyed Latch A, AT, D, R 400.02 404.53 396.63 370.68 Deadbolt AB,B,BA,BW T,TA,TD,B5,B7 411.30 415.82 407.92 381.96 Holdback RHB 407.35 411.87 403.97 378.01 Hotel H, HJ 454.75 428.79 Deadlock AD, YD 177.72 182.24 174.34 148.38 Deadlock-Classroom RD 200.29 204.80 196.91 170.95 Double Keyed Latch C, INL, W 462.64 471.67 455.87 403.97 Deadbolt G, IND, S, INA 475.06 484.08 468.29 416.38 Holdback CHB 475.06 484.08 468.29 416.38 Deadlock WD 239.79 248.81 233.01 181.11 Keyless Passage N 292.82 Privacy (Latch) LT 336.83 Privacy (Deadbolt) L, LB 346.98 Exit NX 336.83 Single Dummy 1DT 126.95 Double Dummy 2DT 225.68 Universal Latch UNR 425.97 430.48 422.59 396.63 Deadbolt UNT, UNAB 433.87 438.38 430.48 404.53 *Patented pricing shown is for CORMAX patented keying. Add $11.28 for Best Preferred patented keying. 28

45H Mortise Locks (continued) * Extra Cost Option Code Per Lock * Extra Cost Option Code Per Lock Satin finishes (per lock) Bright finishes (per lock) UltraShield antimicrobial finish Wrought trim Thick door Tactile both levers/knobs** Tactile outside lever/knob** Tactile inside lever/knob** Lead lined Forged trim Security head screws 7/8" Lip-to-center strike Mounted samples *Indicates extra cost option **Not available on #17 levers. 606, 612, 613,619 etc. 13.54 605, 611, 625, etc. 27.08 626AM, 630AM 28.21 J 5.08 Specify thickness 39.49 TAC/B 56.42 TAC/O 28.21 TAC/I 28.21 LL 110.02 M, N 43.44 SH 10.16 7/8 LTC 10.16 MNT Quote Vandal trim - 630 finish*** VT 70.53 Vandal trim - other finishes*** VT 53.60 Visual Indicator VIN 20.31 12, 17 Lever Design Decorative Lever Design 12, 17 50 to 91 30.47 99.30 ***Available only with #14 and #15 levers. Only #14 lever complies with California State Fire Marshal Code. **Cost Deductions Less cylinder option (Deduct from complete price) Option Code 0 Per Lock 31.03 29

47H High Security Mortise Lock Federal Spec. 86 ANSI 1000 47H 7 R 14 M 626 RH Core Housing Function Code Lever Style Trim Style Finish Door Hand 47H Lever/ Knob - High Security mortise lock 7 7-pin housing accepts all BEST cores A Office D Storeroom R Classroom T Dormitory etc. Levers: 3 Solid tube/return 12* Solid tube/no return 14 Curved/return 15 Contour/angle return 16 Curved/no return 17* Gull wing Knobs: 4 Round Decorative* 50 91 H*** 2-3/4" dia R*** 2-3/4" dia S*** 3-1/2" dia M Forged 626 630 626AM* 630AM* RH RHR LH LHR 7/8"* 7/8" Lip-to-center strike K Non UL cylinder LL* Lead lined TAC/B* Tactile both levers/knobs TAC/O* Tactile outside lever/knob TAC/I* Tactile inside lever/knob Thick Door* specify thickness if other than 1 3/4" VT* Vandal Trim *Indicates Extra Cost See 45H section. ** Indicates cost deduction; see 45H section. Must specify keymark and number of keys. ***To maintain the UL437 standard for high security locks, order only M trim. Using H, R or S trim does not meet the UL437 standard. Function Description Function Code Complete with Combinated Core Patented* Standard Single keyed: Latch A, AT, D, R 490.29 486.90 Deadbolt AB, B, BA,BW, T, TA, TD 504.96 501.57 Deadlock Deadlock-Classroom AD, YD RD 305.80 330.06 302.41 326.67 Double keyed: Latch C, INL, W 600.87 594.10 Deadbolt G, IND, S, INA 618.93 612.16 Deadlock WD 421.46 414.69 *Patented pricing shown is for CORMAX M patented keying system only. Note: The 47H must be keyed at the factory unless the K option is ordered. 30

48H and 49H Mortise Deadlocks 48H 7 K 626 Core Housing Function Code Finish 48H Standard 49H** High security 0 Less cylinder (48H only) 7 7-pin housing 48H accepts all BEST cores 49H accepts 5C core only See below 622 626 690 626AM* Satin* 606 612 613 619 Bright* 605 611 618 625 49H 626 K 1E7K4 high security cylinder (non UL) for 49H only LL* Lead lined SH* Security head screws Thick Door* Specify thickness if other than 1-3/4" RH - Specify for R function LH - Specify for R function (R functions handling must be specified) *Indicates extra cost option; see below. **49H is keyed at the factory unless the K option is ordered. Must specify keymark and number of keys or designate L/C for less core. Security Head screws provided standard on 49H. Description Function Complete with Combinated Core Code Patented* Premium Standard Less Core 48H Single cylinder K, L 176.03 180.54 172.65 146.69 Single cylinder - Classroom R 198.03 202.55 194.65 168.70 Double cylinder M 235.84 244.86 229.07 177.16 49H Single cylinder K, L 331.19 327.80 Single cylinder-classroom R 354.32 350.93 NA Double cylinder M 400.02 393.25 *Patented pricing shown is for CORMAX M patented keying system only. Add $11.28 for Best Preferred patented keying. *Extra cost options Option code Add-on Satin finishes (48H) 606, 612, 613, etc. 13.54 Bright finishes (48H) 605, 611, 625, etc. 27.08 UltraShield antimicrobial finish 626AM, 630AM 28.21 Security head screws (48H) SH 10.16 Thick door (48H only) Specify thickness 39.49 Lead lined LL 110.02 31

40H Mortise Components Federal Spec. 86 ANSI 1000 Case Only Trim Kits 45HCA 45HCA - Mortise lock case only R Function Code A - Office D - Storeroom R - Classroom T - Dormitory etc. 626 Finish 626 630 622 690 626AM* 630AM* Satin* 606 612 613 619 618 Bright* 605 611 625 629 SH* Security head screws 7/8"* 7/8" Lip-to-center strike 40HTK 40HTK - Trim Kit OS2 14 Knob/Lever Function Code Style IS1 inside lever only Levers: IS2 inside lever x turn 3-solid tube/return IS3 inside lever x cyl 12* Solid tube/no IS4 inside cyl only return IS5 inside turn only 14-curved return IS6 inside lever x cylinder 15-contour/angle return x visual indicator 16-curve/no return OS1 outside lever only 17-RH OS2 outside lever x cyl 17-LH OS3 outside Knobs: lever/emergency plate 4-round OS4 outside cyl only OS5 outside lever x visual indicator OS6 outside lever x cylinder x visual indicator Not available in decorative levers. H Trim Style H-2-3/8" dia. R-2-3/4" dia. S-3-1/2" dia J*-wrought M*-forged N*-forged (concealed cylinder) 626 Finish 605* 606* 611* 612* 613* 618* 619* 622 625* 626 629 630 690 626AM* 630AM* Thick Door* (specify thickness if other than 1 3/4") SH* Security head screws TAC/B* Tactile both levers/knobs TAC/O* Tactile outside lever/knob TAC/I* Tactile inside lever/knob *Indicates extra cost option. Function Description Single Keyed Latch Deadbolt Function Code A, AT, D, R AB, B, B5, B7, BA,BW,T,TA,TD Price 156.28 170.39 Holdback RHB 160.80 Hotel H, HJ 170.39 Deadlock AD, YD 107.76 Deadlock- Classroom RD 98.74 Double Keyed Latch C, INL, W 156.28 Deadbolt G, IND, S, INA 170.39 Holdback CHB 160.80 Deadlock WD 107.76 Keyless Passage N 121.87 Privacy (Latch) LT 156.28 Privacy (Deadbolt) L, LB 170.39 Exit NX 486.90 Universal Functions Latch UNR 156.28 Deadbolt UNT, UNAB 170.39 Price includes lock case, faceplate and strike package. Refer to 45H section for complete mortise cylinder pricing. Vandal Trim Retrofit Kit Lever Style 45HVTK 14*-curved return Vandal trim kit 15-contour/angle return Finish 605,606,611,612, 613,618,619,622, 625,626,629,630, 690 Kit Number IS1 - Inside lever only IS2 - Inside lever x turn IS3 - Inside lever x cylinder IS4 - Inside cylinder only IS5 - Inside turn only IS6 - Inside lever x cylinder x visual indicator OS1 - Outside lever only OS2 - Outside lever x cylinder OS3 - Outside lever x emergency plate OS4-Outside cylinder only OS5-Outside lever x Visual Indicator OS6-Outside lever x cylinder x visual indicator *Extra cost options Option code Satin finishes 606, 612, 613, etc. Bright finishes 605, 611, 625, etc. UltraShield antimicrobial finish 626AM, 630AM J Trim J Forged trim M, N Thick Door Specify Thickness Security head screws SH 7/8" Lip-to-center strike 7/8" Tactile both levers/knobs** TAC/B Tactile outside lever/knob** TAC/O Tactile inside lever/knob** TAC/I **Not available on #17 levers. Thick door (specify thickness if other than 1 3/4") Add-on 13.54 27.08 28.21 5.08 43.44 39.49 10.16 10.16 56.42 28.21 28.21 Price 85.76 113.97 123.56 33.85 28.77 143.31 95.35 128.07 99.86 33.85 115.10 147.82 Vandal trim kit finish Price 630 70.53 All others 53.60 32

40H Strike Packages Federal Spec. 86 ANSI 1000 40HST 1 626 Kit number 40HST Strike package 1 Standard 5 Latchbolt only 6 Latchbolt/deadbolt Finishes 605 606 Thick Door* (specify thickness if other than 1-3/4") 611 612 7/8"* 7/8" lip-to-center strike 613 618 SH* Security head screws 619 622 RH - Handing (required for 5,6 kit) 625 626 LH - Handing (required for 5,6 kit) 629 630 626AM* 630AM* 690 *Indicates extra cost option. Parts Description Parts Number Price Strike packages Standard strike package Latchbolt-only strike package Latchbolt/deadbolt strike package Strike packages Plastic strike box Wrought steel strike box Extra cost options 40HST-1-finish 14.67 Thick door Specify thickness 40HST-5-finish-hand 16.93 7/8" Lip-to-center strike 7/8 LTC 40HST-6-finish-hand 16.93 Security head screws SH 1547007 0.99 UltraShield antimicrobial finish 626AM, 630AM 3126903 2.79 10.16 10.16 10.16 28.21 40H Lever Sets 40H Lever Sets 40HLS 14 40HLS Lever set Knob/lever style Levers: 3 Solid tube/return 12* Solid tube/no return 14 Curved/return 15 Contour/angle return 16 Curved/no return 17* RH Gull wing right hand 17* LH Gull wing left hand Knobs: 4 Round 626 Finishes 605 606 611 612 613 618 619 622 625 626 629 630 690 626AM* 630AM* Thick door* (specify thickness if other than 1-3/4") SH* Security head screws *Indicates extra cost option. **Decorative lever design sets are not available. Parts Description Parts Number Price Lever sets 40H Lever Set #3 design 40HLS -3 134.28 40H Lever Set #12 design 40HLS -12 167.00 40H Lever Set #14 design 40HLS-14 134.28 40H Lever Set #15 design 40HLS-15 134.28 40H Lever Set #16 design 40HLS-16 134.28 40H Lever Set #17 RH design 40H Lever Set #17 LH design 40HLS -17 RH 40HLS -17 LH 167.00 167.00 40H Knob Set #4 design 40HLS-4 134.28 Extra Cost Thick Door Security head screws UltraShield antimicrobial finish Specify Thickness SH 626AM 630AM 10.16 10.16 28.21 33

40H Replacement Spindles Federal Spec. 86 40HRS 2 40HRS Replacement spindle kits *Indicates extra cost option. Kit number 2 40H Standard spindle 4 40H Hook spindle Thick door* Specify thickness if other than 1 3/4" ANSI 1000 Parts Description Replacement spindles Parts Number Price *Extra cost options 40H Standard spindle assembly 40HRS-2 14.67 Thick door Specify Thickness 10.16 40H Hook Spindle assembly 40HRS-4 28.77 40H Screw Kits 40HSK 40HSK Screw kits *Indicates extra cost option. 1 Kit number 1 H, R, S, J trim screw kit 2 M, N trim screw kit 3 Special purpose fasteners screw kit 4 Surface-mounted trim screw kit 5 Visual indicator screw kit 40H Screw Kits 626 Finishes 606 612 613 622 626 Thick door* Specify thickness if other than 1 3/4" SH* Security head screws Parts Description Screw kits H, R, S, J trim screw kit M, N trim screw kit Special purpose fasteners screw kit Surface-mounted trim screw kit Visual indicator screw kit Parts Number 40HSK-1 40HSK-2 40HSK-3 40HSK-4 40HSK-5 Price 10.16 10.16 10.16 10.16 10.16 *Extra cost options Thick door Security head screws Specify Thickness 10.16 SH 10.16 34

40H Faceplate Kits Federal Spec. 86 40HFP 3 626 ANSI 1000 Kit number Finishes 40HFP Faceplate kit 0 for function: AB 1 for functions: BW, TD, H, HJ 2 for function: A 3 for functions: AT, D, C, INL, NX, R, W 4 for functions: N, LT 5 for functions: AD, RD, YD, WD 6 Blank with logo 7 for functions: BA, S, TA 8 for functions: B, G,IND, L, LB, T 9 for functions: CHB, RHB 10 Blank without logo 605 606 611 612 613 618 619 622 625 626 629 630 690 SH* Security head screws *Indicates extra cost option. Description All faceplate kits Price 14.67 *Extra cost options: Security head screws SH 10.16 35

J Semi-Trailer Kingpin Locks 2J 7 L11 Core Housing Function Code 2J Standard body 7 7-pin housing; accepts all BEST cores See below TA Without armor Must specify keymark and number of keys or designate L/C for less core. Function Description Single latch Double latch Function Code L11 L21 Complete with Combinated Core Patented* Premium** Standard 308.05 312.57 304.67 453.05 462.08 446.28 Less Core Price 278.71 394.38 *If TA option is not included, only CORMAX M patented keying system can be used and pricing shown applies. If TA option is included, Best Preferred patented keying system can be used and $11.28 must be added to pricing shown. **Applicable only if TA option is included. Part Description Catalog Number Price Accessories Warning flag assembly 2JOF1 27.65 Storage Racks Three post mount 2JOR3 182.80 Three post cad. plated 2JOR3C 228.50 Five post mount 2JOR5 306.36 Five post cad. plated 2JOR5C 342.47 2J7L11-TA 2J7L11-TA 2J7L21-TA 2J7L21-TA 36

5K Grade 2 Tubular Locks Federal Spec. 160 5K 3 7 A 15 C STK 626 ANSI 4000 Backset Core Housing Function Code Knob Style Trim Style Strike Package Finish 5K 2-2 3/8" 3-2 3/4" adjustable backset 0 Keyless 6 6-pin non-ic cylinder 7 7-pin IC housing; accepts all BEST cores A Entrance D Storeroom L Privacy N Passage R Classroom 1DT Dummy Trim*** 14 Curved return 15 Contour angle return C 3" STK Standard S3* ANSI FL* Full lip radius 626 605* 613* 0B** non-ic zero bitted KA** non-ic keyed alike KD** non-ic keyed different OEM**** non-ic OEM cylinder RL Radius latch * Indicates extra cost option. ** Six-pin cylinder in Schlage "C" keyway included with OB, KA, KD. Must specify "6" for core housing. *** Throughbolt makes it difficult to install two dummy trims on the same door with perfect alignment. Double dummy trimming may result in imperfect alignment **** Cylinder not included with OEM option. Must specify "0" for core housing. Function Description Single Keyed Office Storeroom Classroom Keyless Passage Privacy Single dummy trim Function Code A D R N L 1DT Complete with Combinated Core Patented* Premium Standard 85.76 90.27 82.37 85.76 85.76 Less core/less cyl (OEM) 42.88 42.88 25.95 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. 90.27 90.27 82.37 82.37 56.42 56.42 56.42 With non-ic cyl 0B/KA/KD 76.17 76.17 76.17 *Extra Cost Option Code Add-On Bright & Satin finishes (per lock) 605, 613 8.46 Strikes S3, FL 1.97 37

6K 6K Grade 2 Cylindrical Locks - Knobs Federal Spec. 160 6K 2 2-3/8" 3 2-3/4" 4* 3-3/4" 5* 5" 3 7 AB 4 C STK 626 Backset Core Housing Function Code Knob Style Trim Style Strike Package Finish 0 Keyless See below 4 Round C 2-9/16" STK 626 7 7-pin housing; 6 Tulip D* 3-3/8" Standard accepts all BEST convex S3 ANSI Satin* cores LS Less 606 612 strike 613 Bright* 605 611 625 ANSI 4000 KNL* Knurled knobs (keyed knob only) L8 Drive-in latch NF Narrow face latch (std with 62K) WF Wide face latch (std with 63K) *Indicates extra cost option; see below. Must specify keymark and number of keys Function Function Complete with Combinated Core description code Patented* Premium Standard Less Core Single Keyed Office AB 123.56 128.07 120.17 94.22 Storeroom D 123.56 128.07 120.17 94.22 Service station E 123.56 128.07 120.17 94.22 Classroom R 123.56 128.07 120.17 94.22 Keyless Passage N 41.19 Exit Y 41.19 Privacy L 55.86 Hospital privacy LL 55.86 Patio P 55.86 Single dummy trim 1DT 22.00 Double dummy trim 2DT * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. *Extra cost options Satin finishes (per lock) Bright finishes (per lock) Special backset 3-3/8" rose Knurled keyed knob Option code 606, 612, 613, etc. 605, 611, 625, etc. 64K / 65K D KNL Add-on 8.46 19.75 4.80 8.46 11.28 43.44 4D* 6C Part description Part number 2-3/8" deadlocking latch 6KL2 2-3/4" deadlocking latch 6KL3 3-3/4" deadlocking latch 6KL4 5" deadlocking latch 6KL5 2-3/8" drive-in latch 6KL2-8 2-3/4" drive-in latch Standard strike package 6KL3-8 6KS2 ANSI strike package Standard throw member Standard strike box 6KS3 3125559 B25640 Price 18.05 18.05 22.00 22.00 18.05 18.05 3.39 9.59 5.64 1.97 6D* 38

7KC Grade 2 Cylindrical Locks - Levers Federal Spec. 160 7KC 3 Backset 7KC 2 2-3/8" 3 2-3/4" 4* 3-3/4" 5* 5" 7 Core Housing 0 Keyless 6 6-pin non-ic cylinder 7 7-pin housing; accepts all BEST cores AB 15 D STK 626 Function Code Lever Style Trim Style Strike Package Finish See below 14 Curved D 3-1/2" STK 626 return Standard 15 Contour S3 ANSI Satin* angle return 606 612 16 Curved no 613 return Bright* 605 625 ANSI 4000 L8 Drive-in latch (only available on 2-3/8" and 2-3/4" backset). 0B** Zero bitted KA** Keyed alike KD** Keyed different OEM*** Orig equipment mfg ATB Alternate through-bolt NF Narrow face latch *Indicates extra cost option **Six-pin cylinder in Schlage "C" keyway included with 0B, KA, & KD options. Must specify 6 for core housing. ***Cylinders not included with OEM option. Must specify "0" for core housing. Function Description Single Keyed Entrance Storeroom Classroom Keyless Passage Exit Privacy Function Code AB D R N Y L Patented* 159.67 159.67 159.67 Complete with Combinated Core Premium Standard 164.18 156.28 130.33 164.18 156.28 130.33 164.18 156.28 130.33 Less core/cyl OEM 95.91 95.91 108.33 Single dummy trim 1DT 44.01 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. With non-ic cylinder 0B, KA, KD 150.08 150.08 150.08 *Extra cost options Option code Add-on Satin finishes (per lock) 612, 613, etc. 8.46 Bright finishes (per lock) 605, 625, etc. 19.75 Special backset 74KC / 75KC 4.80 Part description 2-3/8" deadlocking latch 2-3/4" deadlocking latch 3-3/4" deadlocking latch 5" deadlocking latch Standard strike package ANSI strike package Standard strike box Part number Price 7KCL2 18.05 7KCL3 18.05 6KL4 22.00 6KL5 22.00 6KS2 3.39 6KS3 9.59 B25640 1.97 39

8K Grade 1 Cylindrical Locks - Knobs Federal Spec. 161 8K 8K Knob Style 3 7 AB 4 D STK 626 Backset 3 2-3/4" 4* 3-3/4" 5* 5" Core Housing 0 Keyless 7 7-pin housing; accepts all BEST cores Function Code See below 4 Round 6 Tulip Strike Rose Style Package A 3-3/8" STK concave, Standard C 2-9/16" S3 ANSI concave, S3 7/8* D 3-3/8" convex 7/8" lip-tocenter strike LS Less strike S5 S6 Finish 626 690 626AM* Satin* 606 612 613 619 Bright* 605 611 625 ANSI 4000 3/4* 3/4" throw BRK Break-away (keyed only) FRL* Full radius latch LL* Lead lined (not available in double keyed functions) SH* Security head screws SPN Spin free (D & W only) TAC/B* Tactile both knobs TAC/O* Tactile outside knob TAC/I* Tactile inside knob *Indicates extra cost option; see below. Must specify keymark and number of keys. Function Description Function Code Complete with Combinated Core Patented* Premium Standard Less Core Single Keyed Entrance AB 268.56 273.07 265.17 239.22 Storeroom D 268.56 273.07 265.17 239.22 Service station E 268.56 273.07 265.17 239.22 Classroom R 268.56 273.07 265.17 239.22 Dormitory T 268.56 273.07 265.17 239.22 Special Note** 268.56 273.07 265.17 239.22 Hotel (SPN-standard) H, HJ 292.26 296.77 288.87 262.92 Double Keyed Corridor C 328.93 337.96 322.16 270.25 Storeroom G 328.93 337.96 322.16 270.25 Communicating S 328.93 337.96 322.16 270.25 Institutional W 328.93 337.96 322.16 270.25 Special DR, RD 328.93 337.96 322.16 270.25 Keyless Passage N, NX 170.39 Exit Y 170.39 Privacy L 196.91 Patio P 196.91 Special LL, M, Q, Z 196.91 Single dummy trim 1DT 72.22 Double dummy trim 2DT 143.87 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. **Single-keyed special functions include: A, B, DZ, EA, RH, RZ, XD, XR, YD, YR, YRH, YRM and YZ. ATTENTION: Locksets that secure both sides of the door (e.g., G, DR, M, RD, S, W, XD, YD & YR) are controlled by building codes and the Life Safety Code. Delay in unlocking for rapid emergency exit could be hazardous or even fatal. 40

8K Grade 1 Cylindrical Locks (continued) * Extra Cost Option Code Add-On Satin finishes (per lock) 606, 612, 613, etc. 8.46 UltraShield antimicrobial finish 626AM 19.75 UltraShield antimicrobial finish 626AM 28.21 3/4" throw latch 3/4 14.11 Special backsets 84K / 85K 9.59 Lead lined Security head screws LL SH 110.02 10.16 Tactile knob both sides TAC/B 39.49 Tactile knob outside TAC/O 19.75 Tactile knob inside TAC/I 19.75 7/8" Lip-to-center strike S3 7/8 10.16 Full radius latch FRL 9.59 Part Description Part Number Price 2-3/4" deadlocking latch 8KL3 34.42 3-3/4" deadlocking latch 8KL4 42.88 5" deadlocking latch 8KL5 42.88 Standard strike package 8KS2 3.39 ANSI strike package 8KS3 9.59 Throw member 6-pin / 7-pin B54210 / B54200 0.71 Breakaway knob driver B54856 3.67 4 TAC option (Blind, safety, & handicapped application) 41

9K Grade 1 Cylindrical Locks - Levers Federal Spec. 161 ANSI 4000 9K 9K 3 Backset 7 Core Housing AB Function Code 0 Keyless 6 6-pin non-ic cylinder 7 7-pin housing; accepts all BEST cores 3 2-3/4" 4* 3-3/4" 5* 5" *Indicates extra cost. Must specify keymark and number of keys. **S3 7/8 is the ANSI flat lip strike ***STK 7/8 is the standard flat lip strike Function Description Function Code See below (Contact sales support for special functions and pricing.) 14 Lever Style 14 Curved with return 15 Contour angle with return 16 Curved without return Complete with Combinated Core Patented* Premium Standard Less Core W/ non-ic cyl Single Keyed Entrance AB 280.41 284.92 277.02 251.07 270.82 Storeroom Service station D E 280.41 280.41 284.92 284.92 277.02 277.02 251.07 251.07 270.82 270.82 Classroom R 280.41 284.92 277.02 251.07 270.82 Dormitory T 280.41 284.92 277.02 251.07 270.82 Special Note** 280.41 284.92 277.02 251.07 270.82 UA UA 280.41 284.92 277.02 251.07 270.82 Hotel (SPN-standard) H, HJ 305.80 310.31 302.41 276.46 296.21 Double Keyed Corridor C 340.21 349.24 333.44 281.54 321.03 Storeroom G 340.21 349.24 333.44 281.54 321.03 Intruder IN 351.50 360.52 344.73 292.82 332.31 Communicating S 351.50 360.52 344.73 292.82 332.31 Institutional W 351.50 360.52 344.73 292.82 332.31 Special DR, RD 351.50 360.52 344.73 292.82 332.31 Keyless Passage N, NX 179.98 NA Exit Y 179.98 NA Privacy L 208.19 NA Patio P 208.19 NA Special LL, M, Q, Z 208.19 NA Single dummy trim 1DT 75.04 NA Double dummy trim 2DT 149.51 NA C Rose Style C 3" convex D 3-1/2" convex K 3" convex no ring L 3-1/2" convex no ring STK Strike Package STK Standard S3 ANSI S3 7/8** STK 7/8*** LS Less strike 626 Finish 626 690 622 626AM* Satin* 606 612 613 619 Bright* 605 611 625 618 3/4* 3/4" throw latch AL/B* Abrasive lever both sides AL/O* Abrasive lever outside AL/I* Abrasive lever inside TL/B* Tactile lever both sides TL/O* Tactile lever outside TL/I* Tactile lever inside ATB Alternate through-bolt mounting FRL* Full radius latch LL* Lead lined ( for double keyed functions) LM Lost motion SH* Security head screws Thin Door* 1-3/8" 0B* non-ic zero bitted KA* non-ic keyed alike KD* non-ic keyed different COR* non-ic Corbin-Russwin MED* non-ic Medeco SAR* non-ic Sargent SCH* non-ic Schlage YAL* non-ic Yale SCHRC Schlage removable core (14 & 15 lever only) WS* Windstorm (listed for Miami-Dade and Florida Building Code) *Only chose one option: [OB,KA, KD] or [COR, MED, SAR, SCH, YAL] ATTENTION: Locksets that secure both sides of the door (e.g., G, DR, IN, M, RD, S, W, XD, YD & YR) are controlled by building codes and the Life Safety Code. Delay in unlocking for rapid emergency exit could be hazardous or even fatal. 42

9K Grade 1 Cylindrical Locks (continued) *Extra Cost Option Code Add-On Satin finishes (per lock) 606, 612, 613, etc. 8.46 Bright finishes (per lock) UltraShield antimicrobial finish Thin door 1-3/8" 605, 625, 629, etc. 626AM 1-3/8" 19.75 28.21 37.24 3/4" throw latch 3/4 14.11 Windstorm Special backsets WS 94K / 95K 14.11 9.59 Lead lined LL 110.02 Security head screws SH 10.16 Abrasive lever both sides AL/B 19.75 Abrasive lever outside AL/O 9.87 Abrasive lever inside AL/I 9.87 Tactile lever both sides TL/B 39.49 Tactile lever outside Tactile lever inside TL/O TL/I 19.75 19.75 7/8" Lip-to-center strike S3 7/8 or STK 7/8 10.16 Full radius latch FRL 9.59 Non-IC zero bitted (single keyed) 0B 19.75 Non-IC zero bitted (double keyed) 0B 39.49 Non-IC keyed alike (single keyed) KA 19.75 Non-IC keyed alike (double keyed) KA 39.49 Non-IC keyed different (single keyed) KD 19.75 Non-IC keyed different (double keyed) KD 39.49 *Only chose one option: [OB,KA, KD] or [COR, MED, SAR, SCH, YAL] *Extra Cost Non-IC Corbin-Russwin (single keyed) Non-IC Corbin-Russwin (double keyed) Non-IC Medeco (single keyed) Non-IC Medeco (double keyed) Non-IC Sargent (single keyed) Non-IC Sargent (double keyed) Non-IC Schlage (single keyed) Non-IC Schlage (double keyed) Non-IC Yale (single keyed) Non-IC Yale (double keyed) Part Description 2-3/4" deadlocking latch 3-3/4" deadlocking latch 5" deadlocking latch Standard strike package ANSI strike package Throw member 6-pin / 7-pin Option Code COR COR MED 3.10 MED 6.21 SAR 3.10 SAR 6.21 SCH 3.10 SCH 6.21 YAL 3.10 YAL 6.21 Part Number 8KL3 8KL4 8KL5 8KS2 8KS3 B54210 / B54200 Add- On 3.10 6.21 Note: These options below don't come with a cylinder. The Lock is just prepped for cylinders of these other manufacturers and comes with a throw member for that manufacturer's cylinder Price 34.42 42.88 42.88 3.39 9.59 0.71 Adaptation Kit Adaptation Kit Family 9KA 9KA Adaptation Kit SCHRCKT Kit Type SCHRCKT Schlage RC Adaptation Kit 14 626 Kit Type Price Lever Style Finish SCHRCKT 35.54 14 Curved return 606 626 15 Contour angle return 612 613 43

AK Knob Adaptations (formerly KA series) Adaptation Kit Number Finish Please contact BEST for the specific kit number to convert your heavy AK duty lockset. The name of the 626 manufacturer and model number are required. Must specify keymark and number of keys. Manufacturer s Name Russwin Patented* Complete with Combinated Core Premium Corbin 98.74 103.25 Sargent 109.45 113.97 Schlage 88.58 93.09 Standard 95.35 106.07 85.19 Less Core 69.40 80.12 59.24 98.74 103.25 95.35 69.40 Yale 109.45 113.97 106.07 80.12 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. Installation at BEST factory 50.00 Kit Components Knob Only Less Core Throw Member Corbin 59.24 12.98 Sargent 67.14 9.59 Schlage 49.09 8.46 Russwin 56.98 12.98 Yale 67.14 10.72 Schlage round Schlage tulip Schlage throw member 44

L Cabinet Locks 5L 7 R D 2 606 Core Housing Mounting Type Latch Type Hand Finish 3L Coin box 5L Standard 5 5-pin housing M Mortise 6 6-pin housing R Rim 7 7-pin housing; accepts all BEST cores D Dead-locking L Latchbolt 2 Vertical 5 Inverted 626 690 Satin* 606 612 613 619 Bright* 605 611 625 T Deadlocking SL* Square Latch, spring loaded 1-1/8" to 2"* Special cylinder (specify length) TR Special trim ring A450 Special strike A451 Special strike A452 Special strike A453 Special strike *Indicates extra cost option; see below. Must specify keymark and number of keys. Description Cabinet Locks Cabinet mortise & rim 3L 66.01 Cabinet mortise & rim 5L 55.86 60.37 52.47 26.52 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. *Extra Cost Square latch spl. cylinder Special cylinders-3l Option Code SL 1-1/2" to 2" Complete with Combinated Core Patented* Premium Standard Add-On 6.77 7.33 Special cylinders-5l 1-1/8" to 2" 7.33 Special finishes See above 1.97 70.53 62.63 Less Core 36.67 Description Catalog Number Complete with Combinated Core Patented* Premium Standard Less Core 8L Mail Box Lock Standard mail box lock 8L7SPR-627 75.04 79.55 71.65 45.70 You must specify the name of the manufacturer and the model number. 5L7RD2 5L7MD5 3L7RD2 Vertical only 45

P Push Locks 2P 7 3 626 Lock Body Mounting slot Finish 2P File cabinet 7 7-pin 3 Vertical body may 4 Horizontal be keyed 6- pin 606 626 Description 2P Catalog Number Patented* Complete with Combinated Core Premium Vertical mounting slot 2P73 73.91 78.42 Standard Horizontal mounting slot 2P74 73.91 78.42 70.53 44.57 *Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. 70.53 Less Core 44.57 Note: You must specify the make, model and year of the filing cabinet for the 2P. 2P73 2P74 46

S Sliding Door Locks 3S 7 5 627 Core housing Function code Finish 2S Sliding door push 3S Sliding panel 4S Sliding door cyl. 7 7-pin housing; accepts all BEST cores (4S requires 6C core) See below 2S 626, 605, 606, 3S Strike straps: 622, 625 S1* 1/4" thick 4S 625, 605, 606, 626 S2* Standard 1/4" 3S 627 S3 5/16" to 1/2" S4 1/2" to 11/16" S5 3/4" & thicker *Included in the price of the housing. Description Function Patented* Complete with combinated core Premium 2S Surface mount 1/2" bolt 3 98.17 102.68 94.79 68.83 Through bolt 1/2" bolt 3 TBM 119.05 123.56 115.66 89.71 Through bolt 3/4" bolt 4 TBM 119.05 123.56 115.66 89.71 Surface mount bolt pin 5 119.05 123.56 115.66 89.71 3S Straight housing 5 82.94 87.45 79.55 53.60 Captured panel housing 7 82.94 87.45 79.55 53.60 Housing with 1" extension 8 108.89 113.40 105.51 79.55 4S ** Sliding glass door cylinder 3 57.55 62.06 54.16 28.21 Sliding wood door cylinder 4 62.06 66.58 58.68 32.72 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. ** 4S Lock requires 6C core (not available with Peaks or Preferred keying). Description Catalog number Separate With lock add-on 3S Strike straps 4-1/4" long for 1/4"panel 6-1/4" long for 1/4" panel 1 2 7.90 9.59 3S Standard strike straps 6-1/4" long for 5/16" to 1/2" 3 14.67 4.57 6-1/4" long for 1/2" to 11/16" 6-1/4" long for 3/4" or thicker 4 5 18.05 12.98 8.46 2.43 Standard Less core 47

SPSL Stanley Patient Safety Lever SPSL SPSL Stanley Patient Safety Lever ML Chassis ML Mortise A Office privacy D Storeroom IND Intruder deadbolt IND2 Intruder storeroom dblt INL Intruder latch LT Bathroom privacy LTF Female patient privacy R Classroom RF Female patient privacy T Dormitory deadbolt W1 Asylum lever/lever W2 Asylum double cyl lever/lever Mortise Safety Levers R Function W3 Asylum deadbolt lever/lever W4 Asylum deadbolt double cyl lever/lever W10 Asylum lever/blank W20 Asylum double cyl lever/blank W30 Asylum deadbolt lever/blank W40 Asylum deadbolt double cyl lever/blank 16F Lever 16F Antiligature lever 630 Finish 630 Satin stainless steel RH Hand RH LH RHR LHR Cylindrical Safety Levers SPSL SPSL Stanley Patient Safety Lever CL Chassis CL Cylindrical 2 3/4" backset CL5 Cylindrical 5" backset ON Function ON Cylindrical passage ONX Cylindrical passage blank interior 16F Lever 16F Antiligature lever 630 Finish 630 Satin stainless steel RH Hand RH LH RHR LHR Description Function Complete with Combinated Core Code Patented* Premium Standard Less Core Mortise Safety Lever Office privacy A 797.78 802.29 794.39 768.44 Storeroom D 737.41 741.92 734.02 708.07 Intruder deadbolt IND 737.41 741.92 734.02 708.07 Intruder storeroom deadbolt IND2 737.41 741.92 734.02 708.07 Intruder latch INL 737.41 741.92 734.02 708.07 Bathroom privacy LT 797.78 802.29 794.39 768.44 Passage ON 648.27 Female patient privacy (RF) RF 797.78 802.29 794.39 768.44 Female patient privacy (LTF) LTF 797.78 802.29 794.39 768.44 Classroom R 737.41 741.92 734.02 708.07 Dormitory deadbolt T 737.41 741.92 734.02 708.07 Asylum lever/lever W1 737.41 741.92 734.02 708.07 Asylum double cyl lever/lever W2 766.75 775.78 759.98 708.07 Asylum deadbolt lever/lever W3 737.41 741.92 734.02 708.07 Asylum deadbolt double cyl lever/lever W4 766.75 775.78 759.98 708.07 Asylum lever/blank W10 737.41 741.92 734.02 708.07 Asylum double cyl lever/blank W20 766.75 775.78 759.98 708.07 Asylum deadbolt lever/blank W30 737.41 741.92 734.02 708.07 Asylum deadbolt double cyl lever/blank W40 766.75 775.78 759.98 708.07 Cylindrical Safety Lever Passage ON 600.31 Passage blank interior ONX 600.31 Dummy Trim Dummy Trim DT 350.93 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. SPECIAL NOTE Normal discount structure does NOT apply to list prices on this page. Obtain net price quotes from your local Stanley Sales Representative. 48

SPSL Stanley Patient Safety Lever (continued) Part description Cylindrical Security head screw kit Mortise Security head screw kit Security head driver kit Turnpiece Disable kit for Female Privacy Locks Cylinder Protector for IC core cylind. SPSL (incl. 2 keys) Cylinder Protector for non-ic cylind. SPSL (incl. 2 keys) Extra magnetic key for SPSL-CP Kit number Price SPSL-SH M1 8.46 SPSL-SH C1 8.46 SPSL-SH D1 8.46 SPSL-TD 56.42 SPSL-CP-IC 400.02 SPSL-CP-NIC 400.02 SPSL-CP-K 14.67 49

SSRL STANLEY Seclusion Room/Time Out Room Locks How to Order Product description 3-Point constant supervision 3-Point unsupervised Product number SSRLS-3 SSRLU-3 Price 982.81 1,050.34 Alum. angled strike kit for 4 point outswing doors SSRL-SK4 244.07 Single point constant supervision SSRLS-1 579.97 Single point constant supervision, includes strike kit for outswing doors SSRLS-1-SK1 604.85 Single point unsupervised SSRLU-1 646.91 Single point unsupervised, includes strike kit for outswing doors SSRLU-1-SK1 672.39 Strike kit for single point outswing doors 3-Point constant supervision w/ digital counter SSRL-SK1 SSRLS-3-C 25.47 1,077.00 3-Point unsupervised w/ digital counter SSRLU-3-C 1,144.54 SPECIAL NOTE Normal discount structure does NOT apply to list prices on this page. Obtain net price quotes from your local Stanley Sales Representative. 50

T Tubular Deadbolts Federal Spec. 180, 181 8T/7T 3 7 K STK Note: 8T=ANSI/BHMA Grade 1 7T=ANSI/BHMA Grade 2 606 Backset Core Housing Function Code Strike Finish 8T 7T 2 2-3/8" 3 2-3/4" 7 7-pin housing; accepts all BEST cores See below STK Std deadbolt S1 ANSI deadbolt S3 ANSI deadlatch S4 Lip deadbolt S5* High security deadbolt (only available in 630 finish) 626 630 690 626AM* Satin* 606 612 613 619 Bright* 605 611 625 (8T only) 7T 626 612 CS* Concealed screws (8T only) D5 Drive-in bolt LL* Lead lined (8T only) NF Narrow face 1" SH* Security head screws (8T only) Thick Door* specify thickness (8T only) Thin Door* specify thickness (8T only) *Indicates extra cost option; see below. Description Function Complete with Combinated Core Code Patented* Premium Standard Less Core 8T Deadbolts Single-keyed turnknob K 117.35 121.87 113.97 88.02 Single-keyed no turnknob L 117.35 121.87 113.97 88.02 Non-keyed turnknob KL 88.02 Double-keyed CS-standard M 169.26 178.29 162.49 110.58 Single-keyed classroom S 117.35 121.87 113.97 88.02 7T Deadbolts Single-keyed turnknob K 78.99 83.50 75.60 49.65 Single-keyed no turnknob L 78.99 83.50 75.60 49.65 Double-keyed M 129.20 138.23 122.43 70.53 *Patented pricing shown is for CORMAX patented keying. Add $11.28 for Best Preferred patented keying. *Extra cost options Satin finishes (per lock) Bright finishes (per lock) (8T only) UltraShield antimicrobial finish (8T only) Concealed screws (8T only) Lead lined (8T only) High security strikes Security head screws (8T only) Thick door (8T only) Thin door (8T; M function only) Option code 606, 612, 613, 619 605, 611, 618, 625 626AM, 630AM CS LL S5 SH Specify thickness Specify thickness Add-On 8.46 8.46 14.11 16.93 64.88 12.41 10.16 13.54 13.54 Part Description Part Number Price 2-3/8 Deadbolt tube 8T27 18.62 2-3/4 Deadbolt tube 8T37 18.62 2-3/8 Drive-in bolt 8T27-D5 18.62 2-3/4 Drive-in bolt 8T37-D5 18.62 Std. deadbolt strike pkg. 8T-7-STK 3.39 ANSI deadbolt strike pkg. 8TS1 9.59 Deadbolt lip strike pkg. 8TS4 3.39 High security strike pkg. / deadbolt 8TS5 19.18 ATTENTION: Locksets that secure both sides of the door (e.g., L and M functions) are controlled by building codes and the Life Safety Code. Delay in unlocking for rapid emergency exit could be hazardous or even fatal. 51

SEDA STANLEY Emergency Door Alarm How to Order Product description Product number Price SPECIAL NOTE Sensor 36" to 42" wide door SEDA-DSA-P1 424.28 Sensor 42" to 48" wide door 12 Door controller/power supply 24 Door controller/power supply 36 Door controller/power supply 48 Door controller/power supply Second console output SEDA-DSA-P2 SEDA-CPS-1A52-12 SEDA-CPS-1A52-24 SEDA-CPS-1A52-36 SEDA-CPS-1A52-48 SEDA-CPS-MOD-CONS-2 456.44 1,320.23 2,320.55 3,320.32 Consult factory 152.33 Normal discount structure does NOT apply to list prices on this page. Obtain net price quotes from your local Stanley Sales Representative. 12 Door LED console SEDA-DCRS-12 840.09 24 Door LED console SEDA-DCRS-24 1,400.34 36 Door LED console SEDA-DCRS-36 1,960.03 48 Door LED console SEDA-DCRS-48 Consult factory 12 Door LED Wall Console SEDA-WCRS-12 1,200.05 24 Door LED Wall Console SEDA-WCRS-24 1,840.42 36 Door LED Wall Console SEDA-WCRS-36 2,576.14 Wall mounted keyswitch SEDA-KS101 152.33 Strobe light ceiling mount SEDA-SL1 72.22 Strobe light ceiling mount w/ steel mounting plate SEDA-SL2 88.02 Full surface angled alum. hinge modified for new or existing hinges SEDA-ECHFS-MH-AL-4 496.50 Splice box for room w/ multiple doors SEDA-SPLB-1 88.02 52

W Electric Switch Locks 1W 1W 7 Core Housing 7 7-pin housing; accepts all BEST cores B1 Function code See below 626 Finish 626 690 Satin* 606 612 613 619 Bright* 605 611 625 SWR Optional Box** See below *Indicates extra cost option; see below. **Not all boxes are compatible with all switch locks. See the catalog for details. Function Description Switch type Key position 2*** Key position 3*** Function Code Patented* Complete with Combinated Core Premium Standard Less Core Maintained Switch Locks Low voltage SPST 3 o'clock NA A1 106.63 111.15 103.25 77.30 Single switch SPDT 2 o'clock NA B1 94.79 99.30 91.40 65.45 Single switch SPDT 12 o'clock NA B2 94.79 99.30 91.40 65.45 Single switch SPST 5 o'clock 12 o'clock C2** 129.20 133.72 125.82 99.86 Toggle switch DPST 2 o'clock NA D2 117.92 122.43 114.53 88.58 Toggle switch TPDT 3 o'clock 9 o'clock E2 119.61 124.12 116.23 90.27 Toggle switch SPDT 2 o'clock 12 o'clock L2 132.02 136.54 128.64 102.68 Dual switch Dual switch 2 SPDT 2 SPDT 3 o'clock 12 o'clock NA NA J1 J2 126.95 142.74 131.46 147.26 123.56 139.36 97.61 113.40 Momentary Switch Locks Single switch SPDT 2 o'clock 12 o'clock B3 106.63 111.15 103.25 77.30 Dual switch 2 SPDT 2 o'clock 12 o'clock J3 126.95 131.46 123.56 97.61 Toggle switch DPDT 2 o'clock 10 o'clock K4 126.95 131.46 123.56 97.61 Dual switch 2 SPDT 2 o'clock 10 o'clock P4 117.92 122.43 114.53 88.58 Quad switch 4 SPDT 2 o'clock 10 o'clock R4 124.12 128.64 120.74 94.79 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. **Supplied with OC1 box only (included in price). ***Key postion 1 for all switch locks is 12 o'clock except for the C2 function which is at 7 o'clock and the L2 function which is at 10 o'clock. For all switch locks, the key is removable in the 12 o'clock position only. *Extra Cost Satin finishes Bright finishes Interior box Standard octagon center mount Option code 606, 612, 613 etc. 605, 611, 625 etc. INT OC1 Add-on 1.78 2.60 22.57 22.00 Parts FUNCTION CODE A1 B1, B2, B3, J1, J2, J3, P4, & R4 REPLACEMENT SWITCH # S4A S4B Price 18.05 6.21 Deep octagon offset mount OC2 37.24 C2 S4C 34.42 Standard weather resistant box SWR 123.00 D4 S4D 11.85 E2 S4E 28.77 K4 L2 S4K S4L 28.77 25.95 53

45HW Electromechanical Mortise Locks Core Housing Function Code Lever Style Trim Style Finish Door Hand 45HW Lever 0** Keyless Electrically-locked:*** 7 7-pin housing; DEL LEL accepts all BEST NXEL TDEL cores TWEL WEL Electrically-unlocked: DEU LEU NXEU TDEU TWEU WEU 45HW 7 DEL 14 H 626 RH Levers: 3 Solid tube/return 12* Solid tube/no return 14 Curved/return 15 Contour/angle return 16 Curved/no return 17* Gull wing Knobs: 4 Round Decorative* 50 91 H 2-3/4"dia. 626 R 2-3/4"dia. 630**** S 3-1/2" dia 690 J* Wrought 626AM* M* Forged 630AM* N* Forged Satin* (concealed 606 612 cylinder; N trim 613 619 invalid on nonkeyed and double Bright* 622 keyed functions) 605 611 625 629**** RH RHR LH LHR DS* Door status monitor IDH* Integrated Door Hardware LL* Lead lined LS* Latch status monitor RQE* Request to exit Thick door* Specify thickness 7/8"* Flat lip strike VT* Vandal Trim 12V 12V Solenoid (24V is standard) TAC/I* Tactile Lever Inside TAC/O* Tactile lever Outside TAC/B* Tactile Lever Both VIN* Visual Indicator * Indicates extra cost; see below. ** Indicates cost deduction; see below. *** Fail safe functions (EL) and fail secure functions (EU) include a Temperature Control Module (TCM) with the price of the lock. Function Complete with Combinated Core Function Code Description Patented* Premium Standard Less Core 45HW Electro-mechanical: 45HW Single key, latch, fail secure DEU 644.32 648.83 640.93 614.98 45HW Single key, latch, fail safe DEL 644.32 648.83 640.93 614.98 45HW Double key, latch, fail secure WEU 704.69 713.71 697.92 646.01 45HW Double key, latch, fail safe WEL 704.69 713.71 697.92 646.01 45HW Keyless, latch, fail secure NXEU 583.95 45HW Keyless, latch, fail safe NXEL 583.95 45HW Single key, deadbolt, fail secure TDEU 656.16 660.68 652.78 626.83 45HW Single key, deadbolt, fail safe TDEL 656.16 660.68 652.78 626.83 45HW Double key, deadbolt, fail secure TWEU 716.53 725.56 709.76 657.86 45HW Double key, deadbolt, fail safe TWEL 716.53 725.56 709.76 657.86 45HW Keyless, deadbolt, fail secure LEU 595.80 45HW Keyless, deadbolt, fail safe LEL 595.80 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. *Extra Cost Option Code Add-On *Extra Cost Satin finishes (per lock) Bright finishes (per lock) 606, 612, 613,619 etc. 605, 611, 625, etc. 27.08 54.16 Request to exit Integrated door hardware UltraShield antimicrobial finish 626AM, 630AM 59.81 Latch status monitor Wrought trim J 5.08 Door status monitor Thick door Lead lined Specify thickness LL 39.49 110.02 Tactile both levers/knobs** Tactile outside lever/knob** Forged trim M, N 43.44 Tactile inside lever/knob** 7/8" Lip-to-center strike 7/8 LTC 10.16 Decorative Lever Design 12, 17 Lever Design 12, 17 30.47 Vandal trim - 630 finish*** VT 70.53 **Cost Deductions Vandal trim - other finish*** VT 54.73 Less cylinder option (Deduct from Visual Indicator VIN 20.31 complete price) **Not available on #17 levers ***Available only with #14 and #15 levers. Only #14 lever complies with California State Fire Marshal Code. ATTENTION: Locksets that secure both sides of the door (e.g., WEL & WEU) are controlled by building codes and the Life Safety Code. Delay in unlocking for rapid emergency exit could be hazardous or even fatal. Option Code Add-On RQE IDH 19.75 57.55 LS 42.32 DS 57.55 TAC/B 56.42 TAC/O 28.21 TAC/I 28.21 50 to 91 99.30 Option Code 0 Deduct 31.03 54

47HW High Security Electromechanical Mortise Locks 47HW 7 DEL 14 H 626 RH Core Housing Function Code Lever Style Trim Style Finish Door Hand 47HW Lever 0** Keyless Electrically-locked:*** 7 7-pin housing; DEL accepts all BEST LEL cores NXEL TDEL TWEL WEL Electrically-unlocked: DEU LEU NXEU TDEU TWEU WEU Levers: 3 Solid tube/return 12* Solid tube/no return 14 Curved/return 15 Contour/angle return 16 Curved/no return 17* Gull wing Knobs: 4 Round Decorative* 50-91 M forged H**** 2-3/4"dia. R**** 2-3/4"dia. S**** 3-1/2" dia 626 630 690 626AM* 630AM* Satin* 606 612 613 619 622 Bright* 605 611 625 629 RH RHR LH LHR DS* Door status monitor IDH* Integrated Door Hardware LS* Latch status monitor RQE* Request to exit Thick door* (Specify thickness) 7/8"* Flat lip strike VT* Vandal Trim 12V 12V Solenoid (24V is standard) K Non-UL Cylinder TAC/I* Tactile Lever Inside TAC/O* Tactile lever Outside TAC/B* Tactile Lever Both * Indicates extra cost; see below. ** Indicates cost deduction; see below. *** Fail safe functions (EL) and fail secure functions (EU) include a Temperature Control Module (TCM) with the price of the lock. ****To maintain the UL437 standard for high security locks, order only M trim. Using H, R or S trim does not meet the UL437 standard. Function Complete with Combinated Core Function Code Description Patented* Premium Standard 47HW Electro-mechanical: 47HW Single key, latch, fail secure DEU 650.52 647.14 47HW Single key, latch, fail safe DEL 650.52 647.14 47HW Double key, latch, fail secure WEU 744.18 737.41 47HW Double key, latch, fail safe WEL 744.18 737.41 47HW Single key, deadbolt, fail secure TDEU 663.50 660.11 47HW Single key, deadbolt, fail safe TDEL 663.50 660.11 47HW Double key, deadbolt, fail secure TWEU 751.51 744.74 47HW Double key, deadbolt, fail safe TWEL 751.51 744.74 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. Less Core See note See note *Extra Cost Option code Add-on *Extra Cost Option Code Add-On Thick door Specify thickness 39.49 Tactile both levers/knobs** TAC/B 56.42 7/8" Lip-to-center strike 7/8 LTC 10.16 Tactile outside lever/knob** TAC/O 28.21 12, 17 Lever Design 12, 17 30.47 Tactile inside lever/knob** TAC/I 28.21 UltraShield antimicrobial finish 626AM, 630AM 28.21 Decorative Lever Design 50-91 99.30 **Cost Deductions Option code Deduct Vandal trim - 630 finish*** VT 70.53 Less cylinder option (Deduct from Vandal trim - other finish*** VT 54.73 complete price) 0 31.03 Request to exit RQE 19.75 Security Head screws provided standard on 47HW. Integrated door hardware IDH 57.55 Latch status monitor LS 42.32 Door status monitor DS 57.55 Satin Finish (Per Lock) 606, 612, 613, 619, etc. 27.08 ATTENTION: Locksets that secure both sides of the door Bright Finish (Per Lock) 605, 611, 625, etc. 54.16 (e.g., WEL & WEU) are controlled by building codes and **Not available on #17 levers the Life Safety Code. Delay in unlocking for rapid ***Available only with #14 and #15 levers. emergency exit could be hazardous or even fatal. Only #14 lever complies with California State Fire Marshall Code. Note: The 47HW must be keyed at the factory unless the K option is ordered. 55

8KW/9KW Electromechanical Cylindrical Locks 8KW 8KW 3 2-3/4" 4* 3-3/4" 5* 5" 3 Backset 7 Core Housing 7 7-pin housing; accepts all BEST cores DEL 4 C STK 626 Function Code DEL Electrically locked DEU Electrically unlocked Knob Style 4 Round 6 Tulip Rose Style Strike Package C 3" convex STK D 3-1/2" convex Standard K 3" convex S3 ANSI L 3-1/2" convex Finish 626 690 626AM* Satin* 606 612 613 619 622 Bright* 605 611 625 BRK Break-away (keyed only) LL* Lead lined SH* Security head screws SPN Spin free (D & W only) 3/4* 3/4" throw RQE* Request to Exit Thin Door* 1-3/8" TAC/I* Tactile Lever Inside TAC/O* Tactile lever Outside TAC/B* Tactile Lever Both * Indicates extra cost; see below. ** Indicates cost deduction; see below. *** Fail safe functions (EL) and fail secure functions (EU) include a Temperature Control Module (TCM) with the price of the lock. 9KW 9KW 3 2-3/4" 4* 3-3/4" 5* 5" 3 7 Backset Core Housing 7 7-pin housing; accepts all BEST cores DEL Function Code DEL Electrically locked DEU Electrically unlocked 15 Lever Style 14 Curved with return 15 Contour with angle return 16 Curved with no return C Rose Style C 3" convex D 3-1/3" convex K 3" convex no ring L 3-1/2" convex no ring S3 626 Strike Package STK Standard S3 ANSI S3~7/8* 7/8 Lip to Center strike LS Less Strike Finish 626 690 626AM* Satin* 606 612 613 619 622 Bright* 605 611 625 3/4* 3/4" throw latch ATB Alternate through-bolt mounting LL* Lead lined LM Lost motion RQE* Request to Exit Thin Door* 1-3/8" AL/O* Abrasive Lever Outside AL/I* Abrasive Lever Inside AL/B* Abrasive Lever Both TL/O* Tactile Lever Outside TL/I* Tactile Lever Inside TL/B* Tactile Lever Both 0B** non-ic zero-bitted KA** non-ic keyed alike KD** non-ic keyed different COR*** Non IC Corbin-Russwin MED*** Non IC Medeco SAR*** Non IC Sargent SCH*** Non IC Schlage YAL*** Non IC Yale SCHRC*** Schlage RC (14 & 15 lever only) * Indicates extra cost option. 56

8KW/9KW Electromechanical Cylindrical Locks (continued) Function Description Function Code Complete with Combinated Core Patented* Premium Standard Electro-mechanical 8KW Elect. locked / unlocked DEL, DEU 453.05 457.57 449.67 9KW Elect. locked / unlocked DEL, DEU 469.98 474.49 466.59 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. Less Core 423.71 440.64 * Extra Cost Option code Add-on Part Description Part Number Price Satin finishes (per lock) 606, 612, 613, etc. 8.46 2-3/4" deadlocking latch 8KL3 34.42 Bright finishes (per lock) 605, 625, 629, etc. 19.75 3-3/4" deadlocking latch 8KL4 42.88 UltraShield antimicrobial finish 626AM 28.21 5" deadlocking latch 8KL5 42.88 Thin door 1-3/8" 1-3/8" 37.24 Standard strike package 8KS2 3.39 3/4" throw latch 3/4 14.11 ANSI strike package 8KS3 9.59 Special backsets 84K / 85K / 94K / 95K 9.59 Throw member 6-pin / 7-pin B54210 / B54200 0.71 Lead lined LL 110.02 Breakaway knob driver B54856 3.47 Security head screws SH 10.16 Tactile knob both sides TAC/B 39.49 **Cost Deductions Option code Deduct Tactile knob outside TAC/O 19.75 Less cylinder option (Deduct from Tactile knob inside TAC/I 19.75 complete price) 0 31.03 Abrasive lever both sides AL/B 19.75 Abrasive lever outside AL/O 9.87 Abrasive lever inside AL/I 9.87 Tactile lever both sides TL/B 39.49 Tactile lever outside TL/O 19.75 Tactile lever inside TL/I 19.75 7/8" Lip-to-center strike S3 7/8 10.16 Request to exit RQE 80.68 57

Electromechanical Lock Accessories DESCRIPTION Transformer AC to DC converter Narrow plate (push button) Standard plate (push button) Temperature control module Door transfer loop Catalog number 8W599 8WCON 8WBU-1-N 8WBU-1-A 8WTCM Price 64.88 24.82 44.01 44.01 71.09 8WDTL 19.75 58

Electronic Lock Software & Accessories For Wi-Q Technology Wireless software, accessories and locks, see pages 76-82 Description Electronic Lock Software NT500 Software: NT510 Administration Software offline NT520 16 Door online license only upgrade* NT520 Client license up to 5** NT510 ID Badging license* NT520 CCTV license agreement B.A.S.I.S. G Software: B.A.S.I.S. G Administration software B.A.S.I.S. G Client license B.A.S.I.S. V Software: B.A.S.I.S. V Administration software B.A.S.I.S. V Client license *Requires NT510 **Requires NT520 Part Number NT510 369.55 NT520 258.97 NT500RC 222.29 NT510ID 210.45 NT500V 314.82 BAS-SWS-G BAS-SWC-G BAS-SWS-V BAS-SWC-V Price 432.18 157.41 432.18 157.41 B.A.S.I.S. G G BV N Z M V X X X X X X X B.A.S.I.S. V X X NT500 Keypad EZ IDH MAX V Two-Door Controllers AC512 Two-door controller with 12V power supply & enclosure (readers and locking devices not included) AC512-IP-B Two-door controller with 12V power supply and enclosure. Ethernet connector. Non-UL. AC512-D Two-door controller with DIN rail mounting plate. RS232 connector. UL*** AC512-IP-D Two-door controller with DIN rail mounting plate. Ethernet connector. UL rated.*** NTAC512B 888.05 NTAC512IPB 1,221.49 NTAC512D 554.61 NTAC512IPD 1,013.87 X X X X Readers Magnetic card access reader 12VDC, track 2, weatherized (no keypad), black (MR-5)**** Dual validation (magnetic stripe & keypad) reader 12VDC, track 2, weatherized (no keypad), black (MR-20), with tamper. 36012OWBK 31012OWBKOT 230.76 444.03 X X HID Proximity reader MiniProx Gray with pigtail leads (5 16 VDC). Mullion mount multi-frequency reader XF1100D 207.63 ***Requires 74N-ENC-D enclosure and BAS-3PMCTX power supply separately. ****Tamper not available on this reader Cards Magnetic Stripe cards non-encoded (Stanley branded): PVC (box of 500) Polyester (box of 500) PVC (single card) Polyester (single card) Magnetic Stripe cards encoded (Stanley branded): PVC (single card) Polyester (single card) Proximity cards non-encoded (HID & Indala branded): HID Clam shell (box of 100) HID branded Indala Clam shell (box of 100) Indala branded 5365EGP00 235.84 Indala proximity reader slim, graphite, 5 inch length. FP4515A 244.86 VPAPVC VPAPOLY VPAPVC-SC VPAPOLYSC VPAPVCSCEN VPAPOLYSCEN 1326LSSMV FPCRDSSSMW0000 977.76 1,107.52 2.03 2.34 6.21 6.77 292.82 314.82 X X X G BV N Z M V X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 59

Electronic Lock Software & Accessories (continued) Description Part Number Price Accessories REPLACEMENT PARTS: Shrink wrap battery pack & foam VPDBATT 9.03 Replacement battery pack VPDBB 15.80 4 Cell Battery holder for new style 2 piece I/S escutcheon offline C83511 19.18 products 8 Cell Battery holder for new style 2 piece I/S escutcheon offline C83522 34.98 products Extended life battery pack VPDEXBB 31.60 Extented life battery door cover B62129 11.85 Service Equipment: PC Admin kit Weigand interface* NTOAKWI 530.91 Line driver (RS232 to RS485)** AC512 Programming cable*** NTLD232485 NTCABAC512 144.44 81.81 Offline lock programming cable Magnetic Card Encoder BASDCAB MSR20633BA 86.89 1,550.42 Transport Programming Device SES-NetBook 658.99 Transport Memory Drive SES-MEM 37.80 Transport USB to Serial Adapter SES-USB 47.39 Transport connector/adapter (no cable, used to connect SES- SES-DB9CON 10.16 USB to BASDCAB) Transport cable adapter (6' Cable adapter) PDA Programming Device PDA Serial cable (Lock & PDA) SES-DP9CAB PDA PDA-CAB 19.18 838.97 90.84 DIN rail enclosure (accepts up to four AC512 door controllers)**** Power supply 12 or 24 VDC, 2.5A output, 120 VAC input, UL Backup battery for power supply, 12 VDC, 12 AH Standard driver bit NT74NENCD AL300ULX NP12A12V VPD-T15 124.69 288.31 91.96 11.85 McGard driver bit VPD-HS-DRVR 15.23 McGard battery door screw (specify finish) VPD-HS-SCRW 15.23 Cleaning cards (box of 50) VPDCLN 81.81 Serial mounting kit NTDDB90 142.74 Cross-over cable NTDCC 18.62 Alarm server BE-55N-AC500D 1,221.49 Alarm input module BE-55N-AC520D 428.79 Alarm output module BE-55N-AC530D 537.12 Delayed egress magnetic lock 17035 768.44 Delayed egress mini magnetic lock 17300 719.92 *Enrolls HID or Indala prox encoded cards. **Extends AC512 beyond 50 feet to 1000 feet. ***PC to AC512 (only for offline installation). ****Accepts up to four AC512-D or AC512IP-D controllers. B.A.S.I.S. G G BV N Z M V X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X B.A.S.I.S. V X NT500 X X X X X X X X X Keypad EZ IDH MAX V X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 60

45HZ Keypad EZ Mortise Locks 45HZ 45HZ Lever 7 TV Core Housing 0** Keyless 7 7-pin housing; accepts all BEST cores Function Code DV Latch with key TV Deadbolt with key NV Latch without key LV Deadbolt without key 15 Lever Style Levers: 3 Solid tube/return 12* Solid tube/no return 14 Curved/return 15 Contour/angle return 16 Curved/no return 17* Gull wing 4 Round Knob Decorative* 50-91 KP 626 Trim Style KP Keypad KPA Keypad adap-tation Finish 626 690 626AM* Antimicrobial Satin* 606 612 613 619 622 Bright* 605 611 618 625 RH Door Hand RH RHR LH LHR 8CE* 8-cell battery holder assy with batteries 4SW 4-cell shrink wrap battery P2** Phillips head screws Thick Door* Specify thickness 7/8"* Flat lip strike TAC/I* Tactile Lever Inside TAC/O* Tactile lever Outside TAC/B* Tactile Lever Both * Indicates extra cost; see below. **T15 Torx security screws are supplied standard. Function Description Function Complete with Combinated Core Code Patented* Premium Standard Less Core KEYPAD EZ MORTISE LOCKS: 45HZ - Single Keyed Latch 45HZ - Single Keyed Deadbolt DV TV 565.89 577.18 570.41 581.69 562.51 573.79 536.55 547.84 45HZ - Non-keyed Latch NV 505.52 45HZ - Non-keyed Deadbolt LV 516.81 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. * Extra Cost Option Code Add-On Satin finishes (per lock) 606, 612, 613,619 etc. 27.08 Bright finishes (per lock) 605, 611, 625, etc. 54.16 UltraShield antimicrobial finish 626AM 59.81 Thick door Specify thickness 39.49 Tactile both levers/knobs** TAC/B 56.42 Tactile outside lever/knob** TAC/O 28.21 Tactile inside lever/knob** 7/8" Lip-to-center strike TAC/I 7/8 LTC 28.21 10.16 12, 17 Lever Design 12, 17 30.47 Decorative Lever Design 50-91 99.30 Extended Life Battery 8CE 31.60 **Not available on #17 levers. **Cost Deductions Less cylinder option (Deduct from complete price) Option Code Deduct 0 31.03 61

9KZ Keypad EZ Cylindrical Locks 9KZ 9KZ 3 2-3/4" 4* 3-3/4" 5* 5" 3 7 DV Backset Core Housing 0*** Keyless 6 6 pin non-ic cylinder 7 7-pin housing; accepts all BEST cores Function Code DV With key 15 Lever Style 14 Curved with return 15 Contour angle return 16 Curved with no return 4 Round Knob KP STK Strike Trim Style Package KP Keypad STK Standard S3 ANSI S3~7/8* Lip to center strike 626 Finish 626 690 626AM* Satin* 606 612 613 619 622 Bright* 605 611 618 625 8CE* 8 cell battery holder assy with batteries 4SW 4 cell shrink wrap battery P2**** Phillips head screws LM Lost motion 3/4* 3/4" throw latch 0B** non-ic zero-bitted KA** non-ic keyed alike KD** non-ic keyed different COR*** Non IC Corbin-Russwin MED*** Non IC Medeco SAR*** Non IC Sargent SCH*** Non IC Schlage YAL*** Non IC Yale SCHRC*** Schlage RC (14 & 15 lever only) AL/O* Abrasive Lever Outside AL/I* Abrasive Lever Inside AL/B* Abrasive Lever Both TL/O* Tactile Lever Outside TL/I* Tactile Lever Inside TL/B* Tactile Lever Both * Indicates extra cost option. ** Six-pin cylinder in Schlage "C" keyway included with 0B, KA, and KD options. Must specify "6" for core housing. *** Cylinder not included with COR, MED, SAR, SCH, YAL, or SCHRC options. Must specify "0" for core housing. ****T15 Torx security screws are supplied standard. Function Description Function Complete with Combinated Core Code Patented* Premium Standard Less Core Keypad EZ Cylindrical Lock 9KZ - Single keyed lock DV 485.21 489.73 481.83 455.87 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. * Extra Cost Option Code Add-On Satin finishes (per lock) 606, 612, 613, etc. 27.08 Bright finishes (per lock) 605, 625, 629, etc. 54.16 UltraShield antimicrobial finish 626AM 59.81 3/4" throw latch 3/4 14.11 Special backsets 94KZ / 95KZ 9.59 Abrasive lever both sides AL/B 19.75 Abrasive lever outside AL/O 9.87 Abrasive lever inside AL/I 9.87 Tactile lever both sides TL/B 39.49 Tactile lever outside TL/O 19.75 Tactile lever inside TL/I 19.75 7/8" Lip-to-center strike S3~7/8 10.16 Extended Life Battery 8CE 31.60 Part Description Part Number 2-3/4" deadlocking latch 8KL3 3-3/4" deadlocking latch 8KL4 5" deadlocking latch 8KL5 Standard strike package 8KS2 ANSI strike package 8KS3 Throw member 6-pin / 7-pin B54210 / B54200 Price 34.42 42.88 42.88 3.39 9.59 0.71 62

EXZ Keypad EZ Exit Trim EXZ EXZ Keypad EZ 7 Core Housing 0** Keyless 7 7-pin housing; accepts all BEST cores EV Function Code EV With key** NV Without key 15 Lever Style 14 Curved w/ return 15 Contour w/ angle return KP Trim Style KP Keypad 626 Finish 626 690 626AM* Satin* 606 613 RHR Door Hand RHR LHR PH1 Manf. VD9 Von Duprin 98/99 series PH2 Precision Hardware 2000 series SA8 Sargent 8000 *** RM Locking Type RM Rim*** MO Mortise RD Surface and concealed vertical rods SH* Security head screws *Indicates extra cost option; see below. **The EV function (key override) is not available on the Von Duprin mortise type, or Sargent rim type device. *** SA8 Only available with rim type device. Function Description Function Complete with Combinated Core Code Patented* Premium Standard Less Core Keypad EZ Exit Trim Locks EXZ - Exit Trim - single keyed EV 737.97 742.49 734.59 708.64 EXZ - Exit Trim - non keyed NV 677.60 * Patented pricing shown is for CORMAX patented keying. Add $11.28 for Best Preferred patented keying. * Extra cost options Satin finishes (per lock) UltraShield antimicrobial finish Security head screws Option code 606, 613, etc. 626AM SH Add-on 27.08 59.81 10.16 63

45HG B.A.S.I.S. G Mortise Locks 45HG 7 TV 14 MS 626 RH Core Housing Function Code Lever Style Trim Style Finish Door Hand 45HG B.A.S.I.S. G 0** Keyless 7 7-pin housing; accepts all BEST cores DV Latch w/key TV Deadbolt w/key LV Deadbolt w/o key NV Latch w/o key Levers: 3 Solid tube/return 12* Solid tube/no return 14 Curved/return 15 Contour/angle return 16 Curved/no return 17* Gull wing Knobs: 4 Round Decorative* 50-91 MS Magnetic stripe DV Dual validation (magstripe and keypad) DVA Other cylinder MSA Other cylinder 626 690 626AM* Satin* 606 612 613 619 Bright* 605 611 625 RH RHR LH LHR 8CE* 8 cell battery holder assy with batteries 4SW 4 cell shrink wrap battery P2*** Phillips head screws KOS* Key override sensor Thick Door* Specify thickness 7/8"* Flat lip strike TAC/I* Tactile Lever Inside TAC/O* Tactile lever Outside TAC/B* Tactile Lever Both TRK1 Track 1 TRK2 Track 2 TRK3 Track 3 *Indicates extra cost option. **Indicates cost deduction. ***T15 Torx security screws are supplied standard. Function Description Function Complete with Combinated Core Code Patented* Premium Standard Less Core Magnetic stripe reader 45HG - Single Keyed Latch DV 609.90 614.41 606.52 580.56 45HG - Single Keyed Deadbolt TV 621.75 626.26 618.36 592.41 45HG - Non-keyed Latch NV 549.53 45HG - Non-keyed Deadbolt LV 561.38 Magnetic stripe/keypad dual validation reader 45HG - Single Keyed Latch DV 685.50 690.02 682.12 656.16 45HG - Single Keyed Deadbolt TV 699.04 703.56 695.66 669.71 45HG - Non-keyed Latch NV 621.18 45HG - Non-keyed Deadbolt LV 634.16 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. * Extra cost options Option code Add-on **Cost deductions Satin finishes (per lock) 606, 612, 613,619 etc. 27.08 Less cylinder option (Deduct from Bright finishes (per lock) 605, 611, 625, etc. 54.16 complete price) UltraShield antimicrobial finish 626AM 59.81 Thick door Specify thickness 39.49 Tactile both levers/knobs** TAC/B 56.42 Tactile outside lever/knob** TAC/O 28.21 Tactile inside lever/knob** TAC/I 28.21 7/8" Lip-to-center strike 7/8 LTC 10.16 12, 17 Lever Design 12, 17 30.47 Decorative Lever Design 50-91 99.30 Extended Life Battery 8CE 31.60 Key Override Sensor KOS 15.80 **Not available on #17 levers. Option code 0 Deduct 31.03 64

9KG B.A.S.I.S G Cylindrical Locks 9KG 9KG 3 7 DV 14 MS STK 626 Backset Core Housing Function Code Lever Style Rose Style Strike Package Finish 3 0 Keyless DV with key 4 Round knob MS Magnetic STK 626 690 2-3/4" 6 6 pin non-ic 14 Curved with return stripe Standard 626AM* 4* cylinder 15 Contour with angle DV Dual S3 ANSI 3-3/4" 7 7-pin housing; return validation S3~7/8* Satin* 5* 5" accepts all BEST 16 Curved without (magstripe and Lip-tocenter 606 612 cores return keypad) strike Bright* 605 625 8CE* 8 cell battery holder assy with batteries 4SW 4 cell shrink wrap battery P2**** Phillips head screws FM Free Motion 3/4* 3/4" throw latch 0B** non-ic zero-bitted KA** non-ic keyed alike KD** non-ic keyed different COR*** Non IC Corbin-Russwin MED*** Non IC Medeco SAR*** Non IC Sargent SCH*** Non IC Schlage YAL*** Non IC Yale SCHRC*** Schlage RC (14 & 15 lever only) AL/O* Abrasive Lever Outside AL/I* Abrasive Lever Inside AL/B* Abrasive Lever Both TL/O* Tactile Lever Outside TL/I* Tactile Lever Inside TL/B* Tactile Lever Both TRK1 Track 1 TRK2 Track 2 TRK3 Track 3 * Indicates extra cost option. ** Six-pin cylinder in Schlage "C" keyway included with 0B, KA, KD options. Must specify "6" for core housing. *** Cylinder not included with COR, MED, SAR, SCH, YAL, or SCHRC options. Must specify "0" for core housing. ****T15 Torx security screws are supplied standard. Function Description Function Complete with Combinated Core Code Patented* Premium Standard Less Core Magnetic Stripe Reader 9KG - Single keyed lock DV 525.83 530.35 522.45 496.50 Mag Stripe/Keypad Dual Validation Reader 9KG - Single keyed lock DV 600.31 604.82 596.92 570.97 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. * Extra Cost Option Code Add-On Satin finishes (per lock) 606, 612, 613, etc. 27.08 Bright finishes (per lock) 605, 625, 629, etc. 54.16 UltraShield antimicrobial finish 626AM 59.81 3/4" throw latch 3/4 14.11 Special backsets 94KG / 95KG 9.59 Abrasive lever both sides AL/B 19.75 Abrasive lever outside AL/O 9.87 Abrasive lever inside AL/I 9.87 Tactile lever both sides TL/B 39.49 Tactile lever outside TL/O 19.75 Tactile lever inside TL/I 19.75 7/8" Lip-to-center strike S3~7/8 10.16 Extended Life Battery 8CE 31.60 Part Description 2-3/4" deadlocking latch 3-3/4" deadlocking latch 5" deadlocking latch Standard strike package ANSI strike package Throw member 6-pin / 7-pin Part Number Price 8KL3 34.42 8KL4 42.88 8KL5 42.88 8KS2 3.39 8KS3 9.59 B54210 / B54200 0.71 65

EXG B.A.S.I.S G Exit Trim EXG EXG B.A.S.I.S. G 7 Core Housing 0** Keyless 7 7-pin housing; accepts all BEST cores EV Function Code EV With key** NV Without key 15 Lever Style 14 Curved w/ return 15 Contour w/ angle return MS Trim Style MS Magnetic stripe DV Dual validation (magstripe and keypad) 626 Finish 626 690 626AM* Satin* 606 613 RHR Door Hand RHR LHR PH2 Manf. VD9 Von Duprin 98/99 series PH2 Precision Hardware 2000 series SA8 Sargent 8000 *** RM Locking Type RM Rim*** MO Mortise RD Surface and concealed vertical rods SH* Security head screws TRK1 Track 1 TRK2 Track 2 TRK3 Track 3 *Indicates extra cost option; see below. **The EV function (key override) is not available on the Von Duprin Mortise type, or Sargent Rim type device. *** SA8 Only available with Rim Type device. Function Description Function Complete with Combinated Core Code Patented* Premium Standard Less Core Magnetic stripe reader EXG - Exit Trim - single keyed EV 685.50 690.02 682.12 656.16 EXG - Exit Trim - non keyed NV 625.13 Magnetic stripe/keypad dual validation reader EXG - Exit Trim - single keyed EV 757.72 762.23 754.34 728.38 EXG - Exit Trim - non keyed NV 700.17 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. * Extra Cost Satin finishes (per lock) UltraShield antimicrobial finish Security head screws Option Code Add-On 606, 613, etc. 27.08 626AM 59.81 SH 10.16 66

45HBV B.A.S.I.S V Mortise Locks 45HBV 7 TV 14 MS 626 RH 45HBV B.A.S.I.S. V Core Housing 0** Keyless 7 7-pin housing; accepts all BEST cores Function Code DV Latch w/key TV Deadbolt w/key LV Deadbolt w/o key NV Latch w/o key Lever Style Trim Style Finish Door Hand Levers: 3 Solid tube/return 12* Solid tube/no return 14 Curved/return 15 Contour/angle return 16 Curved/no return 17* Gull wing Knobs: 4 Round Decorative* 50-91 MS Magnetic stripe DV Dual validation (magstripe and keypad) PH Proximity HID PM Proximity Indala DVA Dual Validation Adaptation MSA Magstripe Adaptation PHA Prox HID Adpatation PMA Prox Motorola Adaptation 626 630 690 626AM* 630AM* Satin* 606 612 613 619 Bright* 605 611 625 629 RH RHR LH LHR 8CE* 8 cell battery holder assy with batteries 4SW 4 cell shrink wrap battery P2*** Phillips head screws KOS* Key override sensor Thick Door* Specify thickness 7/8"* Flat lip strike TAC/I* Tactile Lever Inside TAC/O* Tactile lever Outside TAC/B* Tactile Lever Both TRK1 Track 1 TRK2 Track 2 TRK3 Track 3 MWIE Motorola 26 bit Wiegand H26B HID 26 bit Wiegand H37B HID 37 bit Wiegand *Indicates extra cost option. **Indicates cost deduction. ***T15 Torx security screws are supplied standard. Function Description Function Complete with Combinated Core Code Patented* Premium Standard Less Core Magnetic stripe reader 45HBV - Single Keyed Latch DV 736.28 740.79 732.90 706.94 45HBV - Single Keyed Deadbolt TV 743.62 748.13 740.23 714.28 45HBV - Non-keyed Latch NV 675.35 45HBV - Non-keyed Deadbolt LV 682.68 Magnetic stripe/keypad dual validation reader 45HBV - Single Keyed Latch DV 814.14 818.65 810.76 784.80 45HBV - Single Keyed Deadbolt TV 815.27 819.78 811.88 785.93 45HBV - Non-keyed Latch NV 749.82 45HBV - Non-keyed Deadbolt LV 757.72 HID Proximity reader 45HBV - Single Keyed Latch DV 991.30 995.81 987.91 961.96 45HBV - Single Keyed Deadbolt TV 1000.89 1005.40 997.51 971.55 45HBV - Non-keyed Latch NV 999.20 45HBV - Non-keyed Deadbolt LV 934.88 Indala proximity reader 45HBV - Single Keyed Latch DV 1068.03 1072.54 1064.65 1,038.69 45HBV - Single Keyed Deadbolt TV 1078.19 1082.70 1074.80 1,048.85 45HBV - Non-keyed Latch NV 1,079.31 45HBV - Non-keyed Deadbolt LV 1,009.92 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. 67

45HBV B.A.S.I.S Mortise Locks (continued) * Extra Cost Option Code Add-On **Cost Deductions Option Code Satin finishes (per lock) 606, 612, 613,619 etc. 27.08 Less cylinder option (Deduct from Bright finishes (per lock) 605, 611, 625, etc. 54.16 complete price) 0 UltraShield antimicrobial finish 626AM, 630AM 59.81 Thick door Specify thickness 39.49 Tactile both levers/knobs** TAC/B 56.42 Tactile outside lever/knob** TAC/O 28.21 Tactile inside lever/knob** TAC/I 28.21 7/8" Lip-to-center strike 12, 17 Lever Design 7/8 LTC 12, 17 Decorative Lever Design 50-91 Extended Life Battery 8CE Key Override Sensor **Not available on #17 levers. KOS 10.16 30.47 99.30 31.60 15.80 Deduct 31.03 68

9KBV B.A.S.I.S V Cylindrical Locks 9KBV 3 7 DV Backset Core Housing Function Code Lever Style Rose Style 9KBV 3 0 Keyless DV with key 4 Round knob MS Magnetic 2-3/4" 6 6 pin non-ic 14 Curved with return stripe 4* cylinder 15 Contour with angle DV Dual 3-3/4" 7 7-pin housing; return validation 5* 5" accepts all BEST 16 Curved without (magstripe and cores return keypad) PH Proximity HID PM Proximity Indala 14 MS STK Strike Package STK Standard S3 ANSI S3~7/8* Lip to center strike 626 Finish 626 690 626AM* Satin* 606 612 Bright* 605 625 8CE* 8 cell battery holder assy with batteries 4SW 4 cell shrink wrap battery P2**** Phillips head screws FM Free Motion 3/4* 3/4" throw latch 0B** non-ic zero-bitted KA** non-ic keyed alike KD** non-ic keyed different COR*** Non IC Corbin-Russwin MED*** Non IC Medeco SAR*** Non IC Sargent SCH*** Non IC Schlage YAL*** Non IC Yale SCHRC*** Schlage RC (14 & 15 lever only) AL/O* Abrasive Lever Outside AL/I* Abrasive Lever Inside AL/B* Abrasive Lever Both TL/O* Tactile Lever Outside TL/I* Tactile Lever Inside TL/B* Tactile Lever Both TRK1 Track 1 TRK2 Track 2 TRK3 Track 3 MWIE Motorola 26 bit Wiegand H26B HID 26 bit Wiegand H37B HID 37 bit Wiegand * Indicates extra cost option. ** Six-pin cylinder in Schlage "C" keyway included with 0B, KA, KD options. Must specify "6" for core housing. *** Cylinder not included with COR, MED, SAR, SCH, YAL, or SCHRC options. Must specify "0" for core housing. ****T15 Torx security screws are supplied standard. Function Description Magnetic Stripe Reader Function Complete with Combinated Core Code Patented* Premium Standard Less Core 9KBV - Single keyed lock DV 670.27 674.78 666.88 640.93 Mag Stripe Keypad Dual Validation Reader 9KBV - Single keyed lock DV 747.57 752.08 744.18 718.23 HID Proximity Reader 9KBV - Single keyed lock DV 926.98 931.49 923.60 897.64 Indala Proximity Reader 9KBV - Single keyed lock DV 998.63 1003.15 995.25 969.30 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. * Extra Cost Satin finishes (per lock) Option Code 606, 612, 613, etc. Add-On 27.08 Bright finishes (per lock) 605, 625, 629, etc. 54.16 UltraShield antimicrobial finish 626AM 59.81 3/4" throw latch 3/4 14.11 Special backsets 94KBV / 95KBV 9.59 Abrasive lever both sides AL/B 19.75 Abrasive lever outside AL/O 9.87 Abrasive lever inside AL/I 9.87 Tactile lever both sides TL/B 39.49 Tactile lever outside TL/O 19.75 Tactile lever inside TL/I 19.75 7/8" Lip-to-center strike S3~7/8 10.16 Extended Life Battery 8CE 31.60 Part Description Part Number 2-3/4" deadlocking latch 8KL3 3-3/4" deadlocking latch 8KL4 5" deadlocking latch 8KL5 Standard strike package 8KS2 ANSI strike package 8KS3 Throw member 6-pin / 7-pin B54210 / B54200 Price 34.42 42.88 42.88 3.39 9.59 0.71 69

EXBV B.A.S.I.S V Exit Trim EXBV 7 EV 15 Core Function Housing Code Lever Style EXBV B.A.S.I.S. V 0** Keyless 7 7-pin housing; accepts all BEST cores EV With key** NV Without key 14 Curved w/ return 15 Contour w/ angle return MS Trim Style MS Magnetic stripe DV Dual validation (magstripe and keypad) PH Proximity HID PM Proximity Indala 626 Finish 626 690 626AM* Satin* 606 613 RHR Door Hand RHR LHR PH1 Manf. VD9 Von Duprin 98/99 series PH2 Precision Hardware 2000 series SA8 Sargent 8000 *** RM Locking Type RM Rim*** MO Mortise RD Surface and concealed vertical rods SH* Security head screws TRK1 Track 1 TRK2 Track 2 TRK3 Track 3 *Indicates extra cost option; see below. **The EV function (key override) is not available on the Von Duprin Mortise type, or Sargent Rim type device. ***SA8 Only available with Rim Type device. Function Description Function Complete with Combinated Core Code Patented* Premium Standard Less Core Magnetic Stripe Reader EXBV - Exit Trim - single keyed EV 798.91 803.42 795.52 769.57 EXBV - Exit Trim - non keyed NV 737.97 Mag Stripe Keypad Dual Validation Reader EXBV - Exit Trim - single keyed EV 876.20 880.72 872.82 846.86 EXBV - Exit Trim - non keyed NV 811.88 HID Proximity Reader EXBV - Exit Trim - single keyed EV 1053.36 1057.88 1049.98 1,024.02 EXBV - Exit Trim - non keyed NV 991.86 Indala / HID iclass Proximity Reader EXBV - Exit Trim - single keyed EV 1125.01 1129.53 1121.63 1,095.68 EXBV - Exit Trim - non keyed NV 1,061.82 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. * Extra cost options Satin finishes (per lock) UltraShield antimicrobial finish Security head screws Option code Add-on 606, 613, etc. 27.08 626AM 59.81 SH 10.16 70

45HM IDH MAX Mortise Locks 45HM 7 DEU 14 MS 626 RH Core Housing Function Code Lever Style Trim Style Finish Door Hand 45HM IDH MAX 0** Keyless 7 7-pin housing; accepts all BEST cores DEU Electrically unlocked DEL Electrically locked NXEU Electrically unlocked NXEL Electrically Locked TDEU Electrically Unlocked TDEL Electrically Locked LEU Electrically unlocked LEL Electrically locked Levers: 3 Solid tube/return 4 Round 12* Solid tube/no return 14 Curved/return 15 Contour/angle return 16 Curved/no return 17* Gull wing Decorative* 50-91 MS Magnetic stripe PH Proximity HID PM Proximity Indala MSA Magstripe Adaptation PHA Proximity HID Adaptation PMA Proximity Motorola Adaptation SC - HID iclass 626 630 690 626AM* 630AM* Satin* 606 612 613 Bright* 605 611 625 629 RH RHR LH LHR ABA or Weigand Proximity reader only P2**** Phillips head screws Thick Door* Specify thickness 7/8"* Flat lip strike 1300* B.A.S.I.S. Direct Connect TAC/I* Tactile Lever Inside TAC/O* Tactile lever Outside TAC/B* Tactile Lever Both MWIE Motorola 26 bit Wiegand H26B HID 26 bit Wiegand * Indicates extra cost; see below. ** Indicates cost deduction; see below. *** Fail safe functions (EL) and fail secure functions (EU) include a Temperature Control Module (TCM) with the price of the lock. ****T15 Torx security screws are supplied standard. Function Description Function Code Complete with Combinated Core Patented* Premium Standard Magnetic Stripe Reader 45HM - Single Keyed Latch DEU, DEL 934.32 938.83 930.93 45HM - Non-keyed Latch NXEU, NXEL 45HM - Single Keyed Deadbolt TDEU, TDEL 943.91 948.42 940.52 45HM - Non-keyed Deadbolt LEU, LEL HID Proximity Reader 45HM - Single Keyed Latch DEU, DEL 1206.26 1210.77 1202.87 45HM - Non-keyed Latch NXEU, NXEL 45HM - Single Keyed Deadbolt TDEU, TDEL 1208.52 1213.03 1205.13 45HM - Non-keyed Deadbolt LEU, LEL Indala /HID iclass Proximity Reader 45HM - Single Keyed Latch DEU, DEL 1288.63 1293.15 1285.25 45HM - Non-keyed Latch NXEU, NXEL 45HM - Single Keyed Deadbolt TDEU, TDEL 1291.45 1295.97 1288.07 45HM - Non-keyed Deadbolt LEU, LEL * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. Less Core 904.98 873.38 914.57 882.41 1,176.92 1,145.33 1,179.18 1,147.58 1,259.29 1,225.44 1,262.12 1,228.26 71

45HM IDH MAX Mortise Locks (continued) * Extra Cost Option Code Add-On **Cost Deductions Option Code Deduct Satin finishes (per lock) 606, 612, 613,619 etc. 27.08 Less cylinder option (Deduct from 0 31.03 Bright finishes (per lock) 605, 611, 625, etc. 54.16 complete price) 626AM, 630AM 59.81 UltraShield antimicrobial finish Thick door Specify thickness 39.49 Tactile both levers/knobs** TAC/B 56.42 Tactile outside lever/knob** TAC/O 28.21 Tactile inside lever/knob** TAC/I 28.21 7/8" Lip-to-center strike 7/8 LTC 10.16 12, 17 Lever Design 12, 17 30.47 Decorative Lever Design 50-91 99.30 Integrated BAS1300/LNL1300 reader electronics board 1300 304.67 **Not available on #17 levers. 1300 Option - Integrated BAS1300/LNL1300 reader electronics board or Intelligent System Controller (ISC) is embedded behind the escutcheon, secured and out of sight. This option functions with B.A.S.I.S./Mercury on-line equipment only. 72

9KM IDH MAX Cylindrical Locks 9KM 9KM 0*** Keyless 6 6 pin non-ic cylinder 7 7-pin housing; accepts all BEST cores DDEU Electrically unlocked DDEL Electrically locked 3 7 DDEU 14 MS STK 626 Backset 3 2-3/4" 4* 3-3/4" 5* 5" Core Housing Function Code Lever Style 14 Curved with return 15 Contour with angle return 16 Curved without return Rose Style MS Magnetic stripe PH Proximity HID PM Proximity Indala SC - HID iclass Strike Package STK Standard S3 ANSI S3~7/8* Lip to center strike LS Less Strike Finish 626 690 626AM* Satin* 606 612 613 619 622 Bright* 605 611 625 LM Lost motion P2***** Phillips head screws 3/4* 3/4" throw latch 1300* B.A.S.I.S. Direct Connect 0B** non-ic zero-bitted KA** non-ic keyed alike KD** non-ic keyed different COR*** Non IC Corbin-Russwin MED*** Non IC Medeco SAR*** Non IC Sargent SCH*** Non IC Schlage YAL*** Non IC Yale SCHRC*** Schlage RC (14 & 15 lever only) AL/O* Abrasive Lever Outside AL/I* Abrasive Lever Inside AL/B* Abrasive Lever Both TL/O* Tactile Lever Outside TL/I* Tactile Lever Inside TL/B* Tactile Lever Both MWIE Motorola 26 bit Wiegand H26B HID 26 bit Wiegand H37B HID 37 bit Wiegand * Indicates extra cost option. ** Six-pin cylinder in Schlage "C" keyway included with 0B, KA, KD options. Must specify "6" for core housing. *** Cylinder not included with COR, MED, SAR, SCH, YAL, or SCHRC options. Must specify "0" for core housing. **** Fail safe functions (EL) and fail secure functions (EU) include a Temperature Control Module (TCM) with the price of the lock. *****T15 Torx security screws are supplied standard. Function Description Function Code Complete with Combinated Core Patented* Premium Standard Less Core Magnetic Stripe Reader 9KM - Single keyed lock HID Proximity Reader 9KM - Single keyed lock DDEU, DDEL DDEU, DDEL 892.56 1160.56 897.08 1165.07 889.18 1157.17 863.23 1,131.22 Indala / iclass Proximity Reader 9KM - Single keyed lock DDEU, DDEL 1239.55 1244.06 1236.16 1,210.21 * Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. 1300 Option Integrated BAS1300/ LNL1300 reader electronics board or Intelligent System Controller (ISC) is embedded behind the escutcheon, secured and out of sight. This option functions with B.A.S.I.S./Mercury online equipment only. * Extra Cost Option Code Price Satin finishes (per lock) 606, 612, 613, etc. 27.08 Bright finishes (per lock) 605, 625, 629, etc. 54.16 UltraShield antimicrobial finish 626AM 59.81 3/4" throw latch 3/4 14.11 Special backsets 94KM / 95KM 9.59 Abrasive lever both sides AL/B 19.75 Abrasive lever outside AL/O 9.87 Abrasive lever inside AL/I 9.87 Tactile lever both sides TL/B 39.49 Tactile lever outside TL/O 19.75 Tactile lever inside TL/I 19.75 * Extra Cost Option Code Price 7/8" Lip-to-center strike S3~7/8 10.16 Integrated BAS1300/LNL1300 reader electronics board 1300 304.67 Part Description 2-3/4" deadlocking latch 3-3/4" deadlocking latch 5" deadlocking latch Standard strike package ANSI strike package Throw member 6-pin / 7-pin Part Number Price 8KL3 34.42 8KL4 42.88 8KL5 42.88 8KS2 3.39 8KS3 9.59 B54210 / B54200 0.71 73

STANLEY ID Express Station Remote Card Encoding System The Stanley ID Express Station system provides the ability for cardholders to conduct self-managed transactions via a simple and user-friendly interface at a kiosk station. Existing cards can be updated, or temporary cards can be issued. The Stanley ID Express Station is only compatible with the B.A.S.I.S. Access Control Software. Part Number SSK-IDEXPRESS-K SSK-IDEXPRESS-DC SSK-IDEXPRESS-PROX SSK-IDEXPRESS-Logo Description Stanley ID Express Station - Kiosk configuration with 17" Touchscreen monitor, magnetic stripe card dispenser/enrollment station, verification CCTV and Uninterruptible Power Supply, (see note regarding shipping/crating costs)* Stanley ID Express Station - Desktop Complete Configuration configuration with Touchscreen monitor, magnetic stripe card dispenser/enrollment station and verification CCTV. Uninterruptible Power Supply is not included. An exterior placed UPS is recommended. (see note regarding shipping/crating costs)** Additional Proximity card enrollment station for the K option Kiosk configuration Placement of Customer's LOGO on top of Kiosk. Customer must provide art-ready graphic in electronic format Price 19,653.34 15,856.28 563.07 296.21 LE-SWG-1140*** LE-SWG-1140- INT OpenIT Software Module OpenIT Software Module Integration Programming 4,443.08 Call for Quote** **** Applications utilizing dual validation locks (card and pin) will also require the OpenIT software module for the B.A.S.I.S. management system. Refer to the Technical Support Group section for installation pricing. Shipping/crating charges: *The above unit pricing does not include the crating charge of $350. This amount is in addition to the per unit pricing. (additional rates apply outside of Contiguous United States) **The above unit pricing does not include the crating charge of $250. This amount is in addition to the per unit pricing. (additional rates apply outside of Contiguous United States) ****Applications utilizing dual validation locks (card and pin) will also require the OpenIT software module for the B.A.S.I.S. management system. Refer to the Technical Support Group section for installation pricing. Installation Requirements: (Provided by Others) Electrical: Requires one (1) standard duplex 110 VAC 30 amp circuit located within 2 of equipment. Communications: Data Connection: Ethernet terminated with a RJ45 located within 2 of equipment. 74

STANLEY DataLink Services Part Number Description Price Data integration solutions BASD-SDL 2,633.69 BASD-INST Hourly fee for Datalink related Services 154.03 BASD-TK Turn-key installation for BASD-SDL 6,159.94 Support agreements BASD-B BASD-S BASD-G BASD-P BASD-247 Bronze Support Plan - 1 yr Silver Support Plan - 1 yr Gold Support Plan - 1 yr Platinum Support Plan - 1 yr 24/7 Emergency Pager Support - 1yr Call For Price Call For Price Call For Price Call For Price Call For Price Stanley DataLink provides a generic API (Applications Programming Interface) for the B.A.S.I.S. security database to communicate with another ODBC compliant databases. Contact the technical support team for additional questions or pricing. 75

STANLEY Wi-Q Technology Wireless Access Management Software & Accessories Description Software B.A.S.I.S. 32ES Server* (base support for 32 readers; can be upgraded to 64) B.A.S.I.S. 32ES Client B.A.S.I.S. 32ES Server with Integrated Badging B.A.S.I.S. ADV* (base support for 64 readers; can be upgraded to 256 readers) B.A.S.I.S. ADV & PRO Client B.A.S.I.S. ADV with Integrated Badging B.A.S.I.S. PRO* (base support for 128 readers; can be upgraded to unlimited) Stanley Wi-Q Access Management Software (64 readers enabled) *Requires Stanley Wi-Q Access Control Software (WQS-SWAT) ** Includes Stanley Wi-Q Access Control Software (WQS-SWAT) Part Number Price WQS-SWS-32ES 771.83 WQS-SWC-32ES 256.71 WQS-SWS-32ESI 2,056.51 WQS-SWS-ADV 3,316.93 WQS-SWC-ADV 2,786.58 WQS-SWS-ADVI 8,292.05 WQS-SWS-PRO 14,087.51 WQS-SWAT 185.06 B.A.S.I.S. 32 Reader Upgrade for 32ES System B.A.S.I.S. ADV and PRO reader upgrade (blocks of 64 readers) Note: Normal B.A.S.I.S. software upgrade licenses apply. (Base software and 64 reader blocks) Stanley Wi-Q Software Database Import Database Import Utility Software Database Import Utility Software WQS-32ES-W-32RUP-WQ WQS-PRO-W-64RUP-WQ WQS-12861 WQS-12862 493.11 986.22 Call for Quote Call for Quote 76

STANLEY Wi-Q Technology Wireless Access Management Software & Accessories (cont) Description Portal Gateways (PG) Portal Gateway for up to 64 Readers/Locks* with half wave dipole omnidirectional antenna (should only be used where PG is mounted in an open area, not in a ceiling or restricted signal area) Portal Gateway for up to 64 Readers/Locks* with ceiling mount omnidirectional antenna. Portal Gateway with enclosure, power supply and ceiling mount omnidirectional antenna. Portal Gateway in a mounting enclosure, without Power Supply. This would be used with Power Over Ethernet (POE) devices (not included) Portal Gateway in a mounting enclosure, with ceiling mount omnidirectional antenna, without Power Supply. This would be used with Power Over Ethernet (POE) devices (not included) Portal Gateway for up to 64 Readers/Locks* with wall mount directional antenna. Portal Gateway with enclosure, power supply and wall mount directional antenna. Part Number WQX-PG-C WQX-PG-C-B WQX-PG-BP WQX-PG-BP-C WQX-PG-W WQX-PG-W-B 725.56 910.62 707.51 1,003.15 * Does not imply that 64 readers/locks will be within distance/rf range to connect. Total number of portal gateways required is based on individual system survey and requirements. Price WQX-PG 621.75 810.19 818.09 Wireless Access Controllers (WAC) Wireless Access Controller with half wave dipole omnidirectional antenna (should only be used where WAC is mounted in an open area, not in a ceiling or restricted signal area). Wireless Access Controller with ceiling mount omnidirectional antenna. Wireless Access Controller in enclosure with power supply and ceiling mount omnidirectional antenna. Wireless Access Controller with wall mount directional antenna. Wireless Access Controller in enclosure with power supply and wall mount directional antenna Wireless Access Controller in Nema enclosure with power supply and exterior directional antenna Wireless Access Controller in Nema enclosure with power supply and exterior omni-directional antenna WQX-WAC 420.33 WQX-WAC-C 524.14 WQX-WAC-C-B 709.20 WQX-WAC-W 616.67 WQX-WAC-W-B 801.73 WQX-WAC-D-BW 987.91 WQX-WAC-O-BW 950.68 Wireless Access Controller sign-on keypad WQD-WACPAD Wireless Access Controller Survey Kit WQD-Survey Power and adapters Sealed battery pack VPD-BB Plug-in Transformer (wall-mount) with 6' of cable WQD-12827 Power over Ethernet Power Supply/Inserter WQD-12927-001 Power over Ethernet Active Splitter with Isolation WQD-12928-001 Dial-up to Ethernet Modem WQD-12873-001 Stanley Wi-Q Antennas 2.4 GHz Interior Ceiling Mount Omni-directional Antenna kit* WQD-ACMO 2.4 GHz Interior Wall mount directional antenna kit* 2.4GHZ Exterior directional antenna** 2.4GHZ Exterior omnidirectional mast mount kit** Exterior Antenna Grounding kit*** Surge Protection Kit Cleaning cards (box of 50) * Antenna Kit include antenna, standard mount and 20' cable to connect to PG or WAC. ** Antenna Kit includes antenna, wall and post mounts and 20' cable to connect to WAC or PG. ***Grounding kit includes coax grounding kit and lightning arrestor. WQD-AWMD WQD-AEMD WQD-AEMO WQD-AGT WQD-SURG VPDCLN 123.56 1540.83 Net 15.80 15.80 60.93 59.24 480.70 103.81 196.34 259.53 222.29 178.29 133.15 81.81 77

BEST 45HQ Wireless Mortise Locks With STANLEY Wi-Q Technology 45HQ 7 TV 14 MS 626 RH Core Housing Function Code Lever Style Trim Style Finish Door Hand 45HQ Wireless mortise 0** Keyless 7 7-pin housing; accepts all BEST cores DV Latch w/key TV Deadbolt w/key Levers: 3 Solid tube/return 12* Solid tube/no return 14 Curved/return 15 Contour/angle return 16 Curved/no return 17* Gull wing Knobs: 4 Round Decorative* 50-91 MS Magnetic stripe DV Dual validation (magstripe and keypad) PH Proximity HID PM Proximity Indala DVA Other cyl MSA Other cyl PHA Other cyl PMA Other cyl SC - HID iclass 626 630 690 626AM* 630AM* Satin* 606 612 613 Bright* 605 611 625 629 RH RHR LH LHR 8CE* 8 cell battery holder assy with batteries 4SW 4 cell shrink wrap battery P2*** Phillips head screws Thick Door* Specify thickness 7/8"* Flat lip strike TAC/I* Tactile Lever Inside TAC/O* Tactile lever Outside TAC/B* Tactile Lever Both TRK1 Track 1 TRK2 Track 2 TRK3 Track 3 Note: Wireless locks come with Integrated Door Hardware (IDH) as standard -Request to Exit (RQE), door position switch (DS), latch bolt monitor switch (LS) and key-override switch (KOS) on DV Function. Note: Wireless locks come with Integrated Door Hardware. *Indicates extra cost option. **Indicates cost deduction. ***T15 Torx security screws are supplied standard. Function Description Magnetic stripe reader Magnetic stripe/keypad dual validation reader 45HQ- Single Keyed Latch 45HQ- Single Keyed Deadbolt HID Proximity reader 45HQ- Single Keyed Latch 45HQ- Single Keyed Deadbolt Indala proximity reader 45HQ- Single Keyed Latch 45HQ- Single Keyed Deadbolt TV 1336.03 45HQ- Single Keyed Latch DV 1088.34 1092.86 1084.96 1,059.00 TV 1098.50 1103.01 1095.11 1,069.16 DV TV DV DV 1157.74 1219.24 1223.75 1274.53 Premium 45HQ- Single Keyed Latch DV 986.22 990.74 45HQ- Single Keyed Deadbolt TV 996.38 1000.89 iclass Smart Card reader Function Code Patented* 1274.53 Complete with Combinated Core 1162.25 1279.04 1340.54 1279.04 Standard 982.84 992.99 1154.35 1215.85 1271.14 1332.64 1271.14 Less Core 956.88 967.04 1,128.40 1,189.90 1,245.19 1,306.69 1,245.19 45HQ- Single Keyed Deadbolt TV 1336.03 1340.54 1332.64 1,306.69 *Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. 78

BEST 45HQ Wireless Mortise Locks With STANLEY Wi-Q Technology (continued) * Extra Cost Option Code Add-On **Cost Deductions Option Code Deduct Satin finishes (per lock) Bright finishes (per lock) UltraShield antimicrobial finish Thick door 606, 612, 613,619 etc. 605, 611, 625, etc. 626AM, 630AM Specify thickness 27.08 54.16 59.81 39.49 Less cylinder option (Deduct from complete price) 0 31.03 Tactile both levers/knobs** TAC/B 56.42 Tactile outside lever/knob** TAC/O 28.21 Tactile inside lever/knob** TAC/I 28.21 7/8" Lip-to-center strike 12, 17 Lever Design 7/8" 12, 17 10.16 30.47 Decorative Lever Design 50-91 99.30 Extended Life Battery 8CE 31.60 **Not available on #17 levers. 79

BEST 9KQ Wireless Cylindrical Locks With STANLEY Wi-Q Technology 9KQ 3 7 DV 14 MS STK 9KQ Backset 3 2-3/4" 4* 3-3/4" 5* 5" Wireless cylin Core Housing 0 Keyless 6 6 pin non-ic cylinder 7 7-pin housing; accepts all BEST cores Function Code DV with key Lever Style 14 Curved with return 15 Contour with angle return 16 Curved without return 4 Round knob Rose Style MS Magnetic Strike Package STK Standard S3 ANSI S3~7/8* Lip to center strike Finish 626 690 626AM* Satin* 606 612 stripe DV Dual validation (magstripe and keypad) PH Proximity HID PM Proximity Indala SC - Smart card 626 Bright* 605 625 8CE* 8 cell battery holder assy with batteries 4SW 4 cell shrink wrap battery P2**** Phillips head screws LM Lost motion 3/4* 3/4" throw latch 0B** non-ic zero-bitted COR*** non IC Corbin Russwin MED*** non IC Medeco SAR*** non IC Sargent SCH*** non IC Schlage YAL*** non IC Yale SCHRC*** Schlage RC (14 & 15 lever only) AL/O* Abrasive Lever Outside AL/I* Abrasive Lever Inside AL/B* Abrasive Lever Both TL/O* Tactile Lever Outside TL/I* Tactile Lever Inside TL/B* Tactile Lever Both TRK1 Track 1 TRK2 Track 2 TRK3 Track 3 Note: Wireless locks come with Integrated Door Hardware (IDH) as standard -Request to Exit (RQE), Door Position Switch (DS) * Indicates extra cost option. ** Six-pin cylinder in Schlage "C" keyway included with 0B, KA, KD options. Must specify "6" for core housing. *** Cylinder not included with COR, MED, SAR, SCH, YAL, or SCHRC options. Must specify "0" for core housing. ****T15 Torx security screws are supplied standard. Function Description Function Complete with Combinated Core Code Patented* Premium Standard Magnetic Stripe Reader 9KQ - Single keyed lock DV 897.08 901.59 893.69 Mag Stripe Keypad Dual Validation Reader 9KQ - Single keyed lock DV 998.63 1003.15 995.25 HID Proximity Reader 9KQ - Single keyed lock DV 1159.43 1163.94 1156.05 Indala Proximity Reader 9KQ - Single keyed lock iclass Smart Card Reader DV 1276.22 1280.73 1272.84 Less Core 867.74 969.30 1130.09 1246.88 9KQ - Single keyed lock DV 1276.22 1280.73 1272.84 1246.88 *Patented pricing shown is for CORMAX patented keying system. Add $11.28 for Best Preferred patented keying. * Extra Cost Option Code Add-On Part Description Part Number Satin finishes (per lock) 606, 612, 613, etc. 27.08 2-3/4" deadlocking latch 8KL3 Bright finishes (per lock) 605, 625, 629, etc. 54.16 3-3/4" deadlocking latch 8KL4 UltraShield antimicrobial finish 626AM 59.81 5" deadlocking latch 8KL5 3/4" throw latch 3/4 14.11 Standard strike package 8KS2 / 9KS2 Special backsets 94KQ / 95KQ 9.59 ANSI strike package 8KS3 / 9KS3 Abrasive lever both sides AL/B 19.75 Throw member 6-pin / 7-pin B54210 / B54200 Abrasive lever outside AL/O 9.87 Abrasive lever inside AL/I 9.87 Tactile lever both sides TL/B 39.49 Tactile lever outside TL/O 19.75 Tactile lever inside TL/I 19.75 7/8" Lip-to-center strike 7/8" 10.16 Extended Life Battery 8CE 31.60 Price 34.42 42.88 42.88 3.39 9.59 0.71 80

BEST EXQ Wireless Exit Trim With STANLEY Wi-Q Technology Core housing 0** Keyless 7 7-pin housing; accepts all BEST cores Function code EV With key** Lever style Trim style MS Magnetic stripe DV Dual validation (magstripe and keypad) PH Proximity HID PM Proximity Indala SC - Smart card EXQ 7 EV 15 MS 626 RHR PH2 RM EXQ Wireless exit trim 14 Curved w/ return 15 Contour w/ angle return Finish 626 690 626AM* Satin* 606 612 613 Door hand RHR LHR Mfg VD9 Von Duprin 98/99 series PH2 Precision Hardware 2000 series SA8 Sargent 8000 *** Locking type RM Rim*** MO Mortise RD Surface and concealed vertical rods SH* Security head screws MT1 Track 1 MT2 Track 2 MT3 Track 3 Note: Wireless locks come standard with door position switch (DS), connector/input to connect to a RQE switch inside exit device. (RQE switch must be purchased separately for exit device brand and model). Note: Latch Switch connector is also included for use with a latch switch indicator only on Precision exit devices. *Indicates extra cost option; see below. **The EV function (key override) is not available on the Von Duprin Mortise type, or Sargent Rim type device. ***SA8 Only available with Rim Type device. Function Description Function Complete with Combinated Core Code Patented* Premium Standard Less Core Magnetic Stripe Reader EXQ - Exit Trim - single keyed EV 1103.01 1107.52 1099.63 1,073.67 Mag Stripe Keypad Dual Validation Reader EXQ - Exit Trim - single keyed EV 1207.95 1212.47 1204.57 1,178.61 HID Proximity Reader EXQ - Exit Trim - single keyed EV 1407.68 1412.19 1404.29 1,378.34 Indala Proximity Reader EXQ - Exit Trim - single keyed EV 1512.62 1517.13 1509.24 1,483.28 iclass Smart Card Reader EXQ - Exit Trim - single keyed EV 1512.62 1517.13 1509.24 1,483.28 *Patented pricing shown is for CORMAX patented keying. Add $11.28 for Best Preferred patented keying. * Extra cost options Satin finishes (per lock) UltraShield antimicrobial finish Security head screws Option code Add-on 606, 612, 613 27.08 626AM 59.81 SH 10.16 81

BEST Wireless Conversion Kits With STANLEY Wi-Q Technology WQCNKT Wireless upgrade kits WQCNKT-1 Cylindrical wireless upgrade kit Kit works on B.A.S.I.S. 9K and 40H Platforms Works on Magnetic Stripe, Dual Validation, HID Proximity, and Indala Proximity Kits will not work on 30H Mortise Platforms. Description Kit to convert a B.A.S.I.S. 9K V/G standalone lockset to a Stanley Wi-Q Wireless Lockset. Notes: 1) Kit includes a new 9K chassis with new motor, RQE hub and door position switch. 2) If the conversion kit will be used on a standalone lock with a HID Proximity, it is highly recommended that a new HID Proximity current reader assembly is also purchased. The new style reader will provide approximately 50% better battery life. (Part # 3064905 --- B82399 45HQ HID PROX BEZEL SUB-ASSY (HID), List price $164.18) Price 631.90 WQCNKT-2 Mortise DV function (without deadbolt) wireless upgrade kit with alarm functionality Kit to convert a B.A.S.I.S. 45H V/G standalone lockset to a Stanley Wi-Q Wireless Lockset. Notes: 1) Kit also contains a new 45H DV mortise case which includes RQE, door position switch, latch position switch and key-override sensor to provide for full alarm functionality. 2) If the conversion kit will be used on a standalone lock with a HID Proximity, it is highly recommended that a new HID Proximity current reader assembly is also purchased. The new style reader will provide approximately 50% better battery life. (Part # 3064905 --- B82399 45HQ HID PROX BEZEL SUB-ASSY (HID), List price $164.18) 647.14 WQCNKT-3 Mortise TV function (with deadbolt) wireless upgrade kit with alarm functionality Kit to convert a B.A.S.I.S. 45H V/G standalone lockset to a Stanley Wi-Q Wireless Lockset. Notes: 1) Kit also contains a new 45H TV mortise case which includes RQE, door position switch, deadbolt position switch, and key-override sensor to provide for full alarm functionality. 2) If the conversion kit will be used on a standalone lock with a HID Proximity, it is highly recommended that a new HID Proximity current reader assembly is also purchased. The new style reader will provide approximately 50% better battery life. (Part # 3064905 --- B82399 45HQ HID PROX BEZEL SUB-ASSY (HID), List price $164.18) 678.17 Upgrade kits must be installed by a Stanley Security Solutions technician for warranty purposes. 82

Electronic Lock Inside Escutcheon Conversion Kits Cylindrical conversion kits 9KEKT 9KEKT Cylindrical conversion kit Wireless or non-wireless Q Wi-Q Wireless Blank Non-wireless Kit works on Keypad EZ, B.A.S.I.S. G, B.A.S.I.S. V, NT500, and Wi-Q products. Kits do not work on IDH Max products. DV Function Code DV Latch w/key 626 Finish 626 626AM* Satin* 606 612 613 Bright* 605 625 629 8CE* 8 cell battery holder assy with batteries 4SW 4 cell shrink wrap battery pack P2** Phllips head screws * Indicates extra cost option. **T15 Torx security screws are supplied standard. Mortise conversion kits 45HEKT Q TV 606 45HEKT Mortise conversion kit Wireless or non-wireless Q Wi-Q Wireless Blank Non-wireless Function Code DV Latch w/key TV Deadbolt w/key LV Deadbolt w/o key NV Latch w/o key Finish 626 626AM* Satin* 606 612 613 Bright* 605 625 629 8CE* 8 cell battery holder assy with batteries Thick Door* Specify thickness P2** Phllips head screws **T15 Torx security screws are supplied standard. Conversion kit Price 9KEKT Cylindrical conversion kit Wi-Q Wireless 109.45 Non-wireless 51.34 45HEKT Mortise conversion kit Wi-Q Wireless 109.45 Non-wireless 51.34 * Extra cost options Satin finish Bright finish UltraShield antimicrobial finish Thick door Extended Life Battery Option code 606 612 613 Add-on 27.08 605 625 629 54.16 626AM 59.81 Specify thickness 39.49 8CE 31.60 83

BEST ELECTRONIC & MECHANICAL LOCKS PRICE LIST 62 GSA Stanley Security Solutions, a business division of Stanley Black & Decker, is a provider of integrated access control and security solutions for institutional, commercial and industrial businesses and organizations. Stanley Security Solutions delivers a comprehensive suite of security products, software and integrated systems with a strong emphasis on service. Stanley Security Solutions is committed to extending its position as a leading comprehensive resource for a broad and extensive array of solutions that span the entire security spectrum. 2013 Stanley Security Solutions, Inc. www.stanleysecuritysolutions.com PL62 GSA 04/13