Roloc TM Discs Provide a fast, efficient method for deburring, blending, finishing, removing tool marks and die polishing on all types of metals. Resist loading and shelling under severe operating conditions. They lock securely in place with just a half twist a half twist and it s off. Each disc is color coded by grade. Ideal for use on air tools (right angle and straight) and on flexible shaft grinders. Additionally, Roloc discs and pads feature three different types of fastening systems to accommodate most any stock that you may currently have on hand. Easy to mount easy to change 3M coated abrasive and Scotch-Brite Roloc surface conditioning discs feature a threaded male button attached to the back of each disc for quick and easy mounting to a Roloc disc pad. With a quick half-turn, the disc is locked securely in place for the life of the disc. Each button or disc is color coded to designate grade. Proper Speed Tool 3M Roloc Disc Button Color/Grade Chart 6 24 36 40 0 60 00 4 42 Roloc System Threaded Shaft Roloc Disc Pad Roloc Disc or Wheel 0 80 220 240 280 400 43 44 Accessories: Hook and Loop - See pg. 32. Roloc - See pg. 23. Roloc TM Discs Roloc TM TS Discs Roloc TM TP Discs 6
4 3M TM 777F Regalite TM Polycut TM Resin Bond Cloth YF Wt. 3M TM 78C Regalite TM Polycut TM Fibre 3M s Regalite Polycut incorporates 3M Cubitron and premium aluminum oxide minerals on a heavy YF cloth or fibre backing. Size Prod. I.D. Pkg./Case 24 36 40 0 60 80 P00 P20 " dia. 777F 0/00 76622 76623 76624 7662 800 /2" dia. 777F 0/00 76626 76627 76628 4660 80 2" dia. 777F 0/200 76629 76630 76433 466 8008 802 3" dia. 777F 0/200 7663 76632 76633 76634 8009 803 4" dia. 78C 2/00 83690 8369 83692 83693 83694 8369 Roloc TS Discs " dia. 777F 0/00 7672 /2" dia. 777F 0/00 76749 7673 2" dia. 777F 0/200 76742 76746 7670 7674 3" dia. 777F 0/200 76743 76747 767 767 Roloc TP Discs " dia. 777F 0/00 76764 76772 /2" dia. 777F 0/00 7676 76773 2" dia. 777F 0/200 76762 76766 76770 76774 3" dia. 777F 0/200 76763 76767 7677 7677 * Add Prefix 044- to UPC No. when ordering. Kut stock items 7
3M TM 977F Regalloy Resin Bond Cloth 3M TM 963G Regal TM Resin Bond Cloth YN Wt. Grades 24 80 XF Wt. Grades P00 and P20 3M TM 984C Regal TM Resin Bond Fibre All 4" Products 3M s Cubitron ceramic aluminum oxide on a polyester backing for grinding and deburring carbon steel and aluminum. 46 Size Prod. I.D. Pkg./Case 24 36 40 0 60 80 P00 P20 " dia. 963G 0/00 422 428 427 42 /2" dia. 963G 0/00 40 449 448 4 44 43 2" dia. 963G 0/200 3 2 0 09 07 06 2" dia. 977F 0/200 8387 8388 8389 3" dia. 963G 0/200 08 0 04 03 02 0 00 3" dia. 977F 0/200 8390 839 8392 4" dia. 984C 2/00 83696 83697 83698 83699 Roloc TS Discs " dia. 963G 0/00 /2" dia. 963G 0/00 822 2" dia. 963G 0/200 824 828 8222 8226 82090 3" dia. 963G 0/200 829 8223 8227 Roloc TP Discs " dia. 963G 0/00 8236 /2" dia. 963G 0/00 82093 2" dia. 963G 0/200 82094 3" dia. 963G 0/200 823 823 826 8242 8209 * Add Prefix 044- to UPC No. when ordering. Kut stock items 3M TM 983C Regal TM Resin Bond Fibre Grades 36, 60 and 80 Cubitron mineral coated on a 30 mil fibre backing for aggressive applications where reduced edgewear and firm support is desired. 47 Size Prod. I.D. Pkg./Case 24 36 40 0 60 80 P00 2" dia. 983C 0/200 2232 2233 2234 3" dia. 983C 0/200 22349 2230 223 Roloc TS Discs 2" dia. 983C 0/200 82096 82098 3" dia. 983C 0/200 82097 82099 820 Roloc TP Discs 2" dia. 983C 0/200 3" dia. 983C 0/200 820 * Add Prefix 044- to UPC No. when ordering. 8
3M TM 36F Three-M-ite TM Resin Bond Cloth YF Wt. Grades 24 0, XF Wt. P80 P320 General purpose grinding, blending and deburring on all metals: aluminum oxide on tough, polyester backing. Size Prod. I.D. Pkg./Case 24 36 40 0 60 80 P00 P20 P0 P80 P240 P320 " dia. 36F 0/00 43 42 4 47 46 4 44 /2" dia. 36F 0/00 42 22396 37 22397 22407 22408 22409 2" dia. 36F 0/200 000 22398 22399 22400 2240 22402 22403 49 3873 49 3" dia. 36F 0/200 22392 22393 22394 2239 22404 2240 22406 82244 48 4" dia. 36F 2/00 76429 42 420 Roloc TS Discs " dia. 36F 0/00 97669 /2" dia. 36F 0/00 76789 2" dia. 36F 0/200 97680 76790 76794 9768 3" dia. 36F 0/200 97686 7679 7679 800 Roloc TP Discs " dia. 36F 0/00 9769 76804 76808 774 /2" dia. 36F 0/00 82400 76809 2" dia. 36F 0/00 76798 8240 76802 76806 7680 77 76778 3" dia. 36F 0/200 76799 82402 76803 76807 768 776 * Add Prefix 044- to UPC No. when ordering. 48 3M TM 46F Tri-M-ite TM Resin Bond Cloth YF Wt. Tri-M-ite Resin Bond Cloth are silicon carbide on a polyester backing for grinding glass, titanium and nonferrous materials. 49 Size Prod. I.D. Pkg./Case 24 36 40 0 60 80 P00 P20 P0 P80 P240 P320 2" dia. 46F 0/200 296 294 3" dia. 46F 0/200 298 297 29 * Add Prefix 044- to UPC No. when ordering. Kut stock items 9
Roloc TM Surface Conditioning Discs Scotch-Brite Roloc discs provide a burr-free surface suitable for painting or coating. These discs can also be used for removal of light rust, oxides, and coatings. Color: A VFN - Blue A CRS - Brown A MED - Maroon S SFN - Gray Compatability of Roloc TM Disc Attaching System 3M ( / 2 Turn off and on) Screw on Press on Roloc N/A Type III Roloc+ N/A N/A Roloc TP N/A Power Lock Roloc TS Quick Change Type II Roloc TM Roloc TM TS Roloc TM TP 0 Mineral Type/Grade UPC No. Size RPMs Discs/Case A CRS A MED A VFN S SFN Roloc " x NH 30,000 200 0480-393 0480-392 0480-39 /2" x NH 30,000 200 0480-08764 0480-0876 0480-08766 0480-08767 2" x NH 2,000 200 0480-028 0480-027 0480-023 0480-022 3" x NH 8,000 00 0480-032 0480-03 0480-030 0480-029 4" x NH 2,000 00 0480-294 0480-293 0480-292 Roloc TS /2" x NH 30,000 200 0480-3249 0480-320 0480-32 2" x NH 2,000 200 0480-323 0480-324 0480-32 0480-326 3" x NH 8,000 00 0480-327 0480-328 0480-329 0480-3260 Roloc TP 2" x NH 2,000 200 0480-3237 0480-3238 0480-3239 3" x NH 8,000 00 0480-324 0480-3242 0480-3243 Roloc TM SE Surface Conditioning Discs Scotch-Brite SE surface conditioning products feature a coarser, tougher, more aggressive, abrasive impregnated web construction than regular Scotch-Brite surface conditioning products. Use for heavier deburring, cleaning and finishing applications. Grade Front Color Back Color A CRS Brown Blue A MED Maroon Blue 28 Mineral Type/Grade UPC No. Size RPMs Discs/Case A CRS A MED Roloc SE 2" x NH 2,000 200 0480-808 0480-847 3" x NH 8,000 2 0480-8082 0480-8472 4" x NH 2,000 2 0480-8243 Roloc TS SE 2" x NH 2,000 200 0480-808 3" x NH 8,000 00 0480-8086 Roloc TP SE 2" x NH 2,000 200 0480-8083 3" x NH 8,000 00 0480-8084 Maximum Operating RPMs: Do not exceed the MOS ratings of the holders used with these Roloc products. 20 Accessories: See Roloc Disc Pads, pg. 23.
EXL Roloc TM Unitized Wheels Roloc unitized wheels are strong, efficient products for edge deburring and finishing. They perform well in a variety of metal working applications and on intricate machined parts where close tolerances are important. The Roloc, Roloc TS, or Roloc+ holding systems make changing unitized wheels quick and easy. Wheel Color Lettering 8A CRS Tan Orange 8A MED Tan Orange 6A MED Tan Red 6S FIN Gray Green 2A MED Gray Black 2S FIN Gray Purple 2 Mineral Type/Grade UPC No.* Size Wheels/Case RPMs 8 A CRS 8 A MED 6 A MED 6 S FIN 2 A MED 2 S FIN EXL RolocUnitized Wheels 2" dia. 60 22,00 794 792 790 787 78 783 3" dia. 40,00 79 793 79 789 786 784 EXL RolocTS Unitized Wheels 2" dia. 60 22,00+ 798 7848 7202 7846 7844 7842 3" dia. 40,00+ 799 7849 7203 7847 784 7843 * Add Prefix 0480- to UPC No. when ordering. 2
Roloc TM Bristle Discs 3M Roloc Bristle Discs are ideal for safely cleaning and stripping a wide variety of substances off of metal. The 3M Bristle Disc will easily cut through hardened enamel paint, thick dried adhesive and layers of corrosion without destroying the underlying metal or compromising your safety. In addition, the 3M Bristle Disc does not clog-up with the substances you are trying to remove, giving you a consistent finish throughout the life of the disc. 3M Bristle Discs come in sizes from inch Roloc to 7 inch x /8- thread. For hard to reach areas, try the 3 inch Radial 3M Bristle Disc. Most 3M Bristle Discs come in grades 0, 80 and 20. Color: 0X - Green 80X - Yellow 20X - White Mineral: Regalite Mineral 3 Trim Grade and UPC No. Size (T=Tapered) Pkg./Case RPM s 0 80 20 " dia. /8" 20/80 30,000 0480-8698 0480-8706 0480-870 2" dia. /2" 0/40 2,000 0480-837 /8"T 0/40 2,000 0480-8730 0480-8732 0480-8733 3" dia. /2" 0/40 8,000 0480-83 0480-838 /8"T 0/40 8,000 0480-8734 0480-8736 0480-8737 4." dia. /8"- Thread /0 2,000 0480-2424 0480-24242 0480-24243 7" dia. /8"- Thread / 6,000 0480-0777 0480-0778 Maximum Operating RPMs: The lower of the disc or the disc pad MOS rating must always be used. Roloc TM Bristle Discs Introductory Pack Product 982BS 983BS 982RS 983RS Contents 2 ea. Roloc Bristle Disc, 2" x /2" trim, 0x, 80x, 20x ea. Roloc Disc Pad Holder, 2", Hard 2 ea. Roloc Bristle Disc, 3" x /2" trim, 0x, 80x, 20x ea. Roloc Disc Pad Holder, 3", Hard 3 ea. 3M 777F, 2", 60YF, 80YF, 20YF 2 ea. Roloc Surface Conditioning Discs, 2", ACRS, AMED, AVFN, SSFN 2 ea. Roloc SE Surface Conditioning Discs, 2", ACRS ea. Roloc EXL Unitized Wheels, 2", 2SFIN, 6AMED, 8ACRS 2 ea. Roloc Bristle Disc, 2" x /8" tapered, 0x, 80x, 20x ea. Roloc Disc Pad Holder, 2", Hard 3 ea. 3M 777F, 3", 60YF, 80YF, 20YF 2 ea. Roloc Surface Conditioning Discs, 3", ACRS, AMED, AVFN, SSFN 2 ea. Roloc SE Surface Conditioning Discs, 3", ACRS ea. Roloc EXL Unitized Wheels, 3", 2SFIN, 6AMED, 8ACRS 2 ea. Roloc Bristle Disc, 3" x /8" tapered, 0x, 80x, 20x ea. Roloc Disc Pad Holder, 3", Hard Product Packs/Case UPC No. 982BS 0480-8696 983BS 0480-8697 982RS 0480-8694 22 4
Roloc TM Radial Bristle Discs 3M Radial Bristle Discs are abrasive-filled products with unique features designed to increase productivity in the following applications: Remove adhesive, paint and other coatings, discoloration, heavy oxides, and surface contaminants. Deburr and blend. Clean and prepare surfaces before and after welding. Flexible bristles conform to the part and clean without removing base material reducing damage and rework. The unique bristle pattern reaches tight or awkward areas such as grooves and along 90 angles. Trim Grade and UPC No. Size (T=Tapered) Pkg./Case RPM s 0 80 20 3" dia. 0/40 2,000 0480-24276 0480-24277 0480-24278 Accessories Roloc TM Discs 3M TM Roloc TM Disc Pads Rubber back-up pads are available in different diameters and degrees of hardness for varying grinding applications. Pads are female threaded to receive any standard /4"- 20 thread shaft. Threaded Disc Roloc Shaft Back-up Pad Disc Proper Speed Tool Diameter Hardness RPM s UPC No. " Medium 30,000 044-40 / 2" Hard 30,000 044-400 / 2" Medium 30,000 044-4099 / 2" Soft 30,000 044-4098 2" Extra Hard 2,000 044-4097 2" Hard 2,000 044-4096 2" Medium 2,000 044-409 2" Soft 20,000 044-4094 3" Extra Hard 20,000 044-4093 3" Hard 20,000 044-409 3" Medium 8,000 044-4092 3" Soft,000 044-4090 4" / 8" - Hard 2,000 044-83489 4" Medium 2,000 044-479 / 4" Threaded Shaft 044-402 3M TM Roloc TM TS Disc Pads For use with 3M TS grinding discs and screw on abrasive discs. Diameter Hardness RPM s UPC No. " Medium 30,000 044-77724 / 2" Hard 30,000 044-77728 / 2" Medium 30,000 044-77729 2" Extra Hard 2,000 044-77733 2" Hard 2,000 044-422 2" Medium 2,000 044-42 3" Extra Hard 20,000 044-77737 3" Hard 20,000 044-426 3" Medium 8,000 044-42 3" Soft,000 044-77738 4" Medium 2,000 044-77740 / 4" Threaded Shaft 044-402 3M TM Roloc TM TP Disc Pads For use with 3M TP grinding discs and with press on type abrasive discs. Diameter Hardness RPM s UPC No. " Medium 30,000 044-77723 / 2" Hard 30,000 044-7772 / 2" Medium 30,000 044-77726 / 2" Soft 30,000 044-77727 2" Hard 2,000 044-498 2" Medium 2,000 044-497 2" Soft 20,000 044-77732 3" Extra Hard 20,000 044-7773 3" Hard 20,000 044-4202 3" Medium 8,000 044-420 3" Soft,000 044-77736 4" Medium 2,000 044-77739 / 4" Threaded Shaft 044-402 23
Roloc TM + Buttons These buttons thread into the No. Roloc + Holder for use with unitized wheels. They offer this front-loading feature to allow for quick and easy wheel change. Maximum Product Diameter Use With Oper. RPM 6 3 /8" Unitized Wheels 2,000 w/ /2" dia. /2" - 3" dia. x /8" 20,000 w/2" dia. wide x 3 /8" CH,000 w/3" dia. 7 3 /8" Unitized Wheels 2,000 w/ /2" dia. /2" - 3" dia. x /4" 20,000 w/2" dia. wide x 3 /8" CH,000 w/3" dia Product Buttons/Case UPC No. 6 0480-09 7 0480-060 #6 Button is blue, #7 Button is red Additional Helpful Information Coated Abrasive Roloc TM Discs Optimum Tool Speeds (RPM s) To Maximize Roloc TM Coated Abrasive Disc Cut Rates and Life. Disc Size /2" 2" 3" Stainless 20,000 RPM,000 RPM 0,000 RPM Aluminum 20,000 RPM,000 RPM 0,000 RPM 6 Steel 30,000 RPM 20,000 RPM,000 RPM Roloc TM + Holders & Button Combination Packs These combination packs contain one Roloc + Holder No. and one Roloc + Button No. 6 or 7. Product Specifications Product Use With No. and No. 6 Unitized Wheels 3" Diameter and smaller x /8" wide x 3 /8" CH No. and No. 7 Unitized Wheels 3" Diameter and smaller x /4" wide x 3 /8" CH Product Sets/Case UPC No. No. and No. 6 0480-496 No. and No. 7 0480-49 Material Type Titanium 9,000 RPM 7,000 RPM 4,00 RPM Glass 9,000 RPM 7,000 RPM 4,00 RPM Composites,000 RPM 0,000 RPM 8,000 RPM Compatibility of Roloc TM Disc Attaching Systems 3M ( /2 Turn off and on) Press on Screw on Roloc TP TS Type III Power Lock Type II N/A N/A Quick Change 3M Back-up Pad 7 8 Non 3M Back-up Pad WARNING: Use with 3M Roloc Back-up pads for safe, secure performance. Non-3M back-up pads may have a deeper threaded cavity which causes the button to continue to tighten down during use. This can cause the button to separate from the disc resulting in disc fly off and potential operator harm. 24