DESKS CONTROL DESK SOLUTIONS Three types of solutions: - enclosures with control desk based on Areta system, with door, panel or front shelf - modular desks with and 500 mm depth - monobloc desks. 157 CONTROL DESKS SOLUTIONS
ARETA AL DESK CAINETS MAIN ACCESSORIES ATPA front inserted mounting plate (see page 162) ATFI side panels (see page 44) modular plinth (see page 163) eyebolts (see page 46) ARETA AL The control desk series AL is based on the same vertical modularity concept successfully tested with the PC enclosure: the basic enclosure with Areta structure is completed with a front frame that can be fitted with a closing panel or a shelf. Available in 4 widths, 2 depths and one height within 1mm, the range of control desks can be completed with Areta accessories, to enrich a unique product in its category. / - ARETA structure with rear door or panel (assembled or in kit) - ATAL front frame complete with upper and lower door (see specifications on page 160) The front structure must be completed with shelf ATME AL or front panel ATPN AL. - structure: colour RAL 7035 smooth finish - roof and bottom: colour RAL 7025 textured finish - AL front, rear door or panel: colour RAL 7035 textured finish. IP 55. 158 ARETA AL DESK CAINETS
DESKS 159 ARETA AL DESK CAINETS
ASSEMLED ARETA AL CAINET - Areta structure already assembled with rear door or rear panel - ATAL structure (to be ordered separately the shelf or the front panel and the mounting plate check on page 161-162) AL CAINET H=1 WITH REAR DOOR ATAL ATAL061404FP ATAL081404FP WIDTH CAINET DIMENSIONS DEPTH ATAL121404FP ATAL161404FP 1 ATAL061405FP 500 ATAL081405FP 500 ATAL121405FP 500 ATAL161405FP 1 500 AL CAINET H=1 WITH REAR PANEL ATAL ATAL061404FR ATAL081404FR WIDTH CAINET DIMENSIONS DEPTH ATAL121404FR ATAL161404FR 1 ATAL061405FR 500 ATAL081405FR 500 ATAL121405FR 500 ATAL161405FR 1 500 FLAT-PACK ARETA AL CAINET - Areta structure supplied flat-pack with rear door or rear panel - ATAL structure (to be ordered separately the shelf or the front panel and the mounting plate check on page 161-162) ATAL FRONT FRAME / Frame manufactured from 20/10 sheet steel. Roof extension manufactured from 20/10 sheet steel. Upper door manufactured from 15/10 sheet with sendzimir profiles and mechanical stop avoiding accidental closing, and Ø 3mm double bar locking system. Lower door manufactured from 15/10 sheet steel with stiffening profile and Ø 3mm double bar latch closing system. - adhesive gasket and mounting accessories - a pair of structural uprights. FLAT-PACK ARETA AL CAINET DIMENSIONS WIDTH HEIGHT DEPTH 1 1 500 TOP + OTTOM ATTF040 ATTF050 AL FRONT STRUCTURE* + STRUCT. UPRIGHT ATAL060140 ATAL060140 REAR DOOR* + STRUCT. UPRIGHT ATPO060140 ATPO060140 1 ATTF040 ATAL080140 ATPO080140 1 500 ATTF050 ATAL080140 ATPO080140 1 ATTF40 ATAL120140 ATPO120140 1 500 ATTF50 ATAL120140 ATPO120140 1 1 ATTF140 ATAL160140 ATPO160140 1 1 500 ATTF150 ATAL160140 ATPO160140 REAR PANEL* + STRUCT. UPRIGHT ATRE060140 ATRE060140 ATRE080140 ATRE080140 ATRE120140 ATRE120140 ATRE160140 ATRE160140 (*) AL front structure, rear door, rear panel are supplied together with a pair of uprights. 160 ARETA AL DESK CAINETS
DESKS ARETA AL COMPLEMENTARY ACCESSORIES SHELF ATME Structure manufactured from 15/10 sheet steel. Upper panel manufactured from 15/10 sheet steel with sendzimir rails and gas springs avoiding accidental closing. Colour: RAL 7035 textured finish. Supply includes: - one shelf - upper panel complete with Ø 3mm double bar locking system - sealing gasket - mounting accessories. ATME ATME000AL ATME000AL ATME00AL ATME001AL SHELF CAINET WIDTH 1 PANEL ATPN Manufactured from 15/10 sheet steel. Colour: RAL 7035 textured finish. Supply includes nr. 1 piece with mounting accessories. PANEL ATPN ATPN000AL ATPN000AL ATPN00AL ATPN001AL CAINET WIDTH 1 161 ARETA AL COMPLEMENTARY ACCESSORIES
MOUNTING PLATE H= ATPR Manufactured from 25/10 sendzimir sheet steel. To be ordered separately: - lateral rails (see below) and mounting accessories (see page 54). MOUNTING PLATE H= ATPR ATPR-080 ATPR-080 ATPR-80 ATPR-180 CAINET WIDTH 1 For the correct use and handling of the mounting plates, it is suggested to wear proper gloves (complying with the art. 41-42-43 of the decree 626/94). RAILS WTPR Supply includes: nr. 2 pieces. To be ordered separately: - mounting accessories WTSF - 001CP. RAILS WTPR WTPR-050040CP WTPR-050050CP WTPR-050060CP WTPR-050080CP CAINET DEPTH 500 MOUNTING PLATE H=1300 ATPA Manufactured from 25/10 sendzimir sheet steel. To be ordered separately: - mounting accessories (see page 36). For L > 1 Mounting plate manufactured with two parts with horizontal union and stiffening omega. For the correct use and handling of the mounting plates, it is suggested to wear proper gloves (complying with the art. 41-42-43 of the decree 626/94). MOUNTING PLATE H=1300 ATPA CAINET WIDTH ATPA-060140 ATPA-080140 ATPA-120140 ATPA-160140 1 162 ARETA AL COMPLEMENTARY ACCESSORIES
DESKS MODULAR PLINTH Corner pieces manufactured from 25/10 sheet steel, with PVC front covers caps. Front and side crosspieces manufactured from 20/10 press bent sheet steel. Colour: RAL 7025 textured finish The modular plinth is made up of: - corner pieces: supply includes 4 pieces complete with front covers and mounting hardware - front crosspieces: supply includes 2 pieces - side crosspieces: supply includes 2 pieces. UNIVERSAL CORNER PIECES SIDE CROSSPIECES FOR DESK CAINET CROSS. LENGTH (mm) -A100 -A200 CORNER PIECES FOR PLINTH H=100 CORNER PIECES FOR PLINTH H=200 -T0T -T0500T SIDE CROSS. FOR PLINTH D= 369 SIDE CROSS. FOR PLINTH D=500 469 Supply includes 4 pieces with mounting accessories. Supply includes 2 pieces. To order the side crosspieces H=200, add the suffix D to the code. I.E.: -T0TD. UNIVERSAL FRONT CROSSPIECES CROSS. LENGTH (mm) Note: for more information, assembly drawings and dimensional features, please check on page 217. -T0 FRONT CROSS. FOR PLINTH W= 444 -T0 FRONT CROSS. FOR PLINTH W= 644 -T FRONT CROSS. FOR PLINTH W= 1044 -T1 FRONT CROSS. FOR PLINTH W=1 1444 Supply includes 2 pieces. To order the front crosspieces H=200, add the suffix D to the code. I.E.: -T0D. 163 ARETA AL COMPLEMENTARY ACCESSORIES
MODULAR CONTROL DESKS MM DEPTH W=/ W=/1 OX AE Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel. Door manufactured from 15/10 sheet steel with lateral stiffening cover. - box - door complete with Ø 3mm double bar closing system - mounting plate - adjustable cable entry. Enclosure, door and panel: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55 - NEMA 12 complying with UL508A; UL50. internal mounting plate space space space OX AE AE AE601 AE802 AE123 AE164 DIMENSIONS FIXING FLOOR CALE ENTRY DOOR SPACE INNER PLATE A P C D E F M L H I (MAX) 770 489 303 490 260 445 530 684 358 770 689 303 690 260 645 730 684 358 770 1089 303 510 (x2) 260 445 1130 684 358 1 770 1489 303 710 (x2) 260 645 1530 684 358 164 MODULAR CONTROL DESKS
DESKS SHELF LE Structure manufactured from 15/10 press bent sheet steel. Upper panel manufactured from 20/10 sheet steel with sendzimir rails and gas springs to support lid and avoiding accidental closing. - shelf - lid complete with Ø 3mm double bar closing system - rails to mount supplementary mounting plate - sealing gasket - mounting accessories. Enclosure, door and panel: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55. LE SHELF LE NR. OF LOCKS LE601 LE802 LE123 LE164 2 2 2 1 3 UPPER PART PE Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel with zincpassivated 20/10 rails for mounting plate adjustment. Overturning front panel manufactured from 20/10 sheet steel complete with sendzimir vertical rails and mechanical stop. - upper part - overturning front cover with Ø 3mm double bar closing system - mounting plate - sealing gasket - mounting accessories. Enclosure, door and panel: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55. UPPER PART PE innner plate PE PE601 PE802 PE123 PE164 MOUNTING PLATE DIM. L H I (MAX) 510 370 250 710 370 250 1110 370 250 1 1510 370 250 165 MODULAR CONTROL DESKS
SHELF ME Structure manufactured from 15/10 press bent sheet steel. Upper panel manufactured from 20/10 sheet steel with sendzimir rails and gas springs to support lid and avoiding accidental closing. - shelf - lid complete with Ø 3mm double bar closing system - sealing gasket - mounting accessories. Enclosure, door and panel: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55 - NEMA 12 complying with UL508A, UL50 ME SHELF ME NR. OF LOCKS ME601 ME802 ME123 ME164 2 2 2 1 3 Typical composition: AE box + LE shelf + PE upper part 166 MODULAR CONTROL DESKS
500MM DEPTH DESKS OX AE Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel. Front and rear doors manufactured from 15/10 sheet steel with lateral stiffening cover. - box - doors complete with Ø 3mm double bar closing system - mounting plate - adjustable cable entry. W= W=/1 ox and doors: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55 - NEMA 12 complying with UL508A; UL50. internal mounting plate space space space OX AE AE AE8025 AE1235 AE1645 DIMENSIONS FLOOR FIXING CALE ENTRY DOOR SPACE INNER PLATE A P C D E F M L H I (MAX) 770 500 689 373 690 330 645 730 684 425 770 500 1089 373 510 (X2) 330 445 1130 684 425 1 770 500 1489 373 710 (X2) 330 645 1530 684 425 167 MODULAR CONTROL DESKS
SHELF LE Structure manufactured from 15/10 press bent sheet steel. Upper panel manufactured from 20/10 sheet steel with sendzimir rails and gas springs to support lid and avoiding accidental closing. - shelf - lid complete with Ø 3mm double bar closing system - rails to mount supplementary mounting plate - sealing gasket - mounting accessories. ox and doors: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55. LE SHELF LE NR. CLOSING SYSTEM LE8025 LE1235 LE1645 2 2 1 3 front panel rear panel UPPER PART PE Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel with 20/10 zincpassivated rails for mounting plate adjustment. Overturning front and rear panel manufactured from 20/10 sheet steel complete with sendzimir vertical rails and mechanical stop. - upper part - overturning front cover with Ø 3mm double bar closing system - mounting plate - sealing gasket - mounting accessories. ox and doors: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55. inner plate UPPER PART PE PE PE8025 PE1235 PE1645 PLATE DIMENSIONS L H I (MAX) 710 370 335 1110 370 335 1 1510 370 335 168 MODULAR CONTROL DESKS
DESKS SHELF ME Structure manufactured from 15/10 press bent sheet steel. Upper panel manufactured from 20/10 sheet steel with sendzimir rails and gas springs to support lid and avoiding accidental closing. - shelf - lid complete with Ø 3mm double bar closing system - sealing gasket - mounting accessories. ox and doors: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55 - NEMA 12 complying with UL508A, UL50. ME SHELF ME NR. OF LOCKS ME8025 ME1235 ME1645 2 2 1 3 Typical composition: AE box + LE shelf + PE upper part 169 MODULAR CONTROL DESKS
MODULAR PLINTH Corner pieces manufactured from 25/10 sheet steel, with PVC front covers caps. Front and side crosspieces manufactured from 20/10 press bent sheet steel. Colour: RAL 7025 textured finish. The modular plinth is made up of: - corner pieces: supply includes 4 pieces complete with front covers and mounting hardware - front crosspieces: supply includes 2 pieces - side crosspieces: supply includes 2 pieces UNIVERSAL CORNER PIECES SIDE CROSSP. FOR MODULAR CONTROL DESKS CROSS. LENGTH (mm) -A100 -A200 CORNER PIECES FOR PLINTH H=100 CORNER PIECES FOR PLINTH H=200 -T0A -T0500 SIDE CROSS. PLINTH D= 236 SIDE CROSS. PLINTH D=500 306 Supply includes 4 pieces with mounting accessories. Supply includes 2 pieces. To order the side crosspieces H=200, add the suffix D to the code. I.E.: -T0AD. UNIVERSAL FRONT CR0SSPIECES CROSS. LENGTH (mm) Note: for more information, assembly drawings and dimensional features, please check on page 217. -T0 FRONT. CROSS. FOR PLINTH W= 444 -T0 FRONT. CROSS. FOR PLINTH W= 644 -T FRONT. CROSS. FOR PLINTH W= 1044 -T1 FRONT. CROSS. FOR PLINTH W=1 1444 Supply includes 2 pieces. To order the front crosspieces H=200, add the suffix D to the code. I.E.: -T0D. 170 MODULAR CONTROL DESKS
DESKS MONOLOC CONTROL DESKS SA W=/ W=1000/ Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel. Front and rear doors manufactured from 15/10 sheet steel with lateral stiffening cover. Upper panel manufactured from 15/10 sheet steel complete with sendzimir rails and gas springs to support lid and avoiding accidental closing. Structure, doors, upper panel: colour RAL 7035 textured finish. - control desk - doors complete with Ø 3mm double bar closing system - mounting plate - upper panel complete with closing system - adjustable cable entry. CONFORMITY AND APPROVAL - IP 55 - NEMA 12 complying with UL508A, UL50. internal mounting plate 171 MONOLOC CONTROL DESKS
CONTROL DESK SA SA SA601 SA801 SA001 SA201 DIMENSIONS FLOOR FIXING CALE ENTRY DOOR SPACE INNER PLATE A 1000 1000 P C 489 689 D 273 273 E 490 690 1000 1000 889 273 410 (X2) 230 345 930 830 334 1000 1089 273 510 (X2) 230 445 1130 830 334 F 230 230 M 445 645 L 530 730 H 830 830 I (MAX) 334 334 MODULAR PLINTH Corner pieces manufactured from 25/10 sheet steel, with PVC front covers caps. Front and side crosspieces manufactured from 20/10 press bent sheet steel. Colour: RAL 7025 textured finish. The modular plinth is made up of: - corner pieces: supply includes 4 pieces complete with front covers and mounting hardware - front crosspieces: supply includes 2 pieces - side crosspieces: supply includes 2 pieces UNIVERSAL CORNER PIECES SIDE CROSSPIECES FOR SA CONTROL DESKS CROSS. LENGTH (mm) -A100 CORNER PIECES FOR PLINTH H=100 -T0 SIDE CROSSPIECES FOR PLINTH D= 206 -A200 CORNER PIECES FOR PLINTH H=200 Supply includes 2 pieces. Supply includes 4 pieces with mounting accessories. To order the side crosspieces H=200, add the suffix D to the code. I.E.: -T0D. UNIVERSAL FRONT CROSSPIECES CROSS. LENGTH (mm) Note: for more information, assembly drawings and dimensional features, please check on page 217. -T0 FRONT CROSS. FOR PLINTH W= 444 -T0 FRONT CROSS. FOR PLINTH W= 644 -T1000 FRONT CROSS. FOR PLINTH W=1000 844 -T FRONT CROSS. FOR PLINTH W= 1044 Supply includes 2 pieces. To order the front crosspieces H=200, add the suffix D to the code. I.E.: -T0D. 172 MONOLOC CONTROL DESKS
DESKS ZA Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel mounted on the rear cover. Upper cover manufactured from 15/10 sheet steel complete with sendzimir profiles and mechanical stop. Adjustable cable entry. Structure, doors, upper panel: colour RAL 7035 textured finish. - control desk - doors complete with Ø 3mm double bar closing system - mounting plate - upper cover complete with locking system - adjustable cable entry. CONFORMITY AND APPROVAL - IP 55 - NEMA 12 complying with UL508A, UL50. W=/ W=1000/ inner plate CONTROL DESK ZA ZA DIMENSIONS FLOOR FIXING CALE ENTRY DOOR SPACE INNER PLATE A P C D E F M L H ZA601 1000 489 303 490 260 445 520 918 ZA801 1000 689 303 690 260 645 720 918 ZA001 1000 1000 889 303 410 (X2) 260 345 920 918 ZA201 1000 1089 303 510 (X2) 260 445 1120 918 173 MONOLOC CONTROL DESKS
MODULAR PLINTH Corner pieces manufactured from 25/10 sheet steel, with PVC front covers caps. Front and side crosspieces manufactured from 20/10 press bent sheet steel. Colour: RAL 7025 textured finish. The modular plinth is made up of: - corner pieces: supply includes 4 pieces complete with front covers and mounting hardware - front crosspieces: supply includes 2 pieces - side crosspieces: supply includes 2 pieces UNIVERSAL CORNER PIECES SIDE CROSSPIECES FOR ZA CONTROL DESKS CROSS. LENGTH (mm) -A100 CORNER PIECES FOR PLINTH H=100 -T0A SIDE CROSS. FOR PLINTH D= 236 -A100 CORNER PIECES FOR PLINTH H=200 Supply includes 2 pieces. Supply includes 4 pieces with mounting accessories. To order the side crosspieces H=200, add the suffix D to the code. I.E.: -T0AD. UNIVERSAL FRONT CROSSPIECES CROSS. LENGTH (mm) Note: for more information, assembly drawings and dimensional features, please check on page 217. -T0 FRONT CROSS. FOR PLINTH W= 444 -T0 FRONT CROSS. FOR PLINTH W= 644 -T1000 FRONT CROSS. FOR PLINTH W=1000 844 -T FRONT CROSS. FOR PLINTH W= 1044 Supply includes 2 pieces. To order the front crosspieces H=200, add the suffix D to the code. I.E.: -T0D. 174 MONOLOC CONTROL DESKS
DESKS CONTROL DESKS COMPLEMENTARY ACCESSORIES CASING FOR PE To be mounted on the 500mm deep PE instead of the rear panel when a greater depth is required. PECF equipment footprint PECF8025 PECF1235 PECF1645 CASING PE PE WIDTH 1 Manufactured from 15/10 sheet steel. Colour: RAL 7035 textured finish. Supply includes nr. 1 casing with closing system, sealing gasket and mounting accessories. MOUNTING PLATE FOR AE Manufactured from 25/10 sendzimir sheet steel. Supply includes nr. 1 piece complete with mounting accessories. MOUNTING PLATE FOR AE PA4-AE PA4-AE825 PA4-AE235 PA4-AE645 AE WIDTH 1 MOUNTING PLATE FOR LE Manufactured from 25/10 sendzimir sheet steel. Supply includes nr. 1 piece complete with mounting accessories. MOUNTING PLATE FOR LE PA4-LE PA4-LE015 PA4-LE025 PA4-LE235 PA4-LE645 LE WIDTH 1 175 CONTROL DESKS COMPLEMENTARY ACCESSORIES
COVER TL FOR LE SHELF Manufactured from 15/10 sheet steel. Colour: RAL 7035 textured finish. Supply includes nr. 1 piece complete with sealing gasket and mounting accessories. TL FOR LE D= TL TL601 TL802 TL123 TL164 1 DIMENSIONS P 398 398 398 398 TL FOR LE D=500 TL TL8025 TL1235 TL1645 1 DIMENSIONS P 498 498 498 HANDLE FOR CONTROL DESK Manufactured from aluminium alloy. Supply includes nr. 1 piece complete with mounting accessories. HANDLE WA WA- WA-410 WA-430 WA-440 WA-450 WIDTH 1000 1 SPA UPPER PART SPA SPA601 SPA801 SPA001 SPA201 594 794 994 1194 DIMENSIONS E 470 670 870 1070 176 CONTROL DESKS COMPLEMENTARY ACCESSORIES
DESKS LOCKING SYSTEMS WE REF. WE251 1 LOCK WE255 2 ETA INSERT WE160 3 ETA KEY WE260 4 INSERT 6 WE263 5 KEY 6 WE265 6 INSERT 7 WE268 7 KEY 7 WE270 8 INSERT 6,5 WE273 9 KEY 6,5 WE275 10 INSERT 8 WE278 11 KEY 8 WE209 12 FIAT LOCK WE210 13 FIAT KEY LOCKING SYSTEMS WE REF. WE010 1 ROD SYSTEM WE080 2 FIAT INSERT WE210 3 FIAT KEY WE027 4 COVER FOR FIAT INSERT WE030 5 ETA INSERT Ø 3 WE160 6 ETA KEY Ø 3 WE040 7 ETA INSERT Ø 5 WE170 8 ETA KEY Ø 5 WE050 9 INSERT 7 WE180 10 KEY 7 WE060 11 INSERT 8 WE190 12 KEY 8 WE070 13 INSERT 7 WE200 14 KEY 7 WE020 15 ETA LOCK COVER 177 CONTROL DESKS COMPLEMENTARY ACCESSORIES