Electric Flow Boiler

Electric Flow Boiler

EHC offer the most comprehensive range of electric boilers in the market and with our wealth of knowledge and technical expertise we have designed the Slim Jim Electric Flow Boiler using the latest technology. The compact design of the boiler makes it ideal for heating applications where space is at a premium. The Slim Jim is traditionally installed by professional heating engineers in properties such as apartments, domestic dwellings, holiday homes and light commercial properties. The Slim Jim is a fully controllable electric flow boiler which is designed to maximise cupboard space. The boiler also has an easy-fit front cover for future maintenance purposes. The versatile outputs are 4, 7, 10, 12, and 14.4kW. It can be installed as an open vented system or a conventional sealed system comprising of circulating pump and sealed system kit. A typical heating installation would comprise of the Slim Jim Boiler complete with standard wet system radiators, thermostatic valves, programmer and room thermostat. The boiler temperature range can be set between 30 degrees and 80 degrees centigrade which also makes it a suitable choice for underfloor heating applications. The Slim Jim has a user-friendly Front Control Panel incorporating heat mode and fault finding indicators, an on/off switch and easy-to-use temperature control setting. Safety is of paramount importance to EHC and as such our Slim Jim boiler has been designed to include a unique high current safety cut-out that protects the boiler from over-heating. The Slim Jim can be supplied as boiler only or complete with a choice of Heat Packs. Please contact our Sales Team 01698 820533 for further information.

Using the latest technology the Slim Jim Electric Flow Boiler offers the discerning buyer the flexibility and controllability of a modern electric wet central heating system. Easy to install Fully modulating boiler Compact in size: with 6 stage heating 912mm x 203mm x 172mm No mandatory boiler Outputs from 4kW servicing required up to 14.4kW Soft start approach to 100% Efficient avoid power surges No flue or fuel tanks required - can be located almost anywhere Silent in operation Maintenance free Exchanger Stainless Steel Heat Stainless Steel Heating Elements Can be used with standard radiators and thermostatic valves Adjustable control to set boiler temperature In-built fault finding diagnostics 2 years Parts & Labour guarantee

SlimJim Key Components Enclosure Heat Exchanger Insulation Flow: 22mm compression connection Stainless Steel Heat Exchanger Stainless Steel Elements Over Heat Cut-Out Entry Point for Power Return: 22mm compression connection PCB Volt Free Control Connections Entry Point for Controls

Typical System Design Sealed System-Heating only AAV Flow Auto Bypass Filling Loop PRV Pressure gauge Pump Return Expansion Vessel Magnetic Filter SlimJim Boilers in Parallel 22mm 28mm 35mm Flow 22mm 22mm 22mm Return 22mm 22mm 22mm Pump 35mm 28mm 22mm Drain Point NOTE: Expansion vessels and pressure relief valves are not shown on this schematic. All system designs should be in accordance with BS5449

In addition to supplying the Slim Jim Electric Flow Boiler, EHC also supply a variety of Stainless Steel Unvented Hot Water Cylinders. To complete your installation we can offer a selection of Heat Packs: Heating Only Sealed System Kit, Pump, Auto Air Vent, Magnetic Filter, Central Heating Programmer and Room Stat. Heating & Hot Water Sealed System Kit, Pump, Auto Air Vent, Magnetic Filter, Central Heating Programmer, Room Stat and Hot Water Programmer.

Heat Pack Components DHW Expansion Vessel Heating Expansion Vessel Auto Air Vent DHW Programmer DHW Control Valve Tundish Magnetic Filter Pump CH Programmer & Room Stat Direct Stainless Steel Slim Cylinder Options Capacity Height (mm Diameter (mm) Weight (kg empty) 120 Litre 1236 478 35 150 Litre 1424 478 40 180 Litre 1674 478 45

TECHNICAL SPECIFICATION Boiler range kw 4kW 7kW 10kW 12kW 14.4kW Pipe entry boiler - flow Pipe entry boiler - return top bottom Central heating flow & return pipes mm 22 Max pressure MPa 0.3 Min pressure MPa 0.05 Out flow water temperature ºC 30 _ 80 Max water temperature ºC 100 Overall dimensions (height x width x depth) mm 912 x 203 x 172 Weight Kg 11 Water connection mm 22 Safety class IP22 Electrical supply V AC 240V 1ph 50Hz Load current A 16.7 29.2 41.7 50.0 60.0 Recommended diameter of mains cable mm 6 10 16 16 16 Heat output (Btu/h) BTU/h 13648 23884 34120 40944 49161 Temperature setting (factory set) ºC 80 Min temperature setting ºC 30 Overheat protection ºC 100 Protection A 20 40 50 63 80 The Electric Heating Company Limited Tel: 01698 820533 Fax: 01698 825697 www.electric-heatingcompany.co.uk Email: info@electric-heatingcompany.co.uk