Last update: 06/09/11 EDGE Park / R Mounting R recessed Code Light bars Number of LED @350mA Power System W @525mA (Standard Version) @700mA Recessed Hole LXP##R04D* 2 40 47 70 93 450mm LXP##R06D* 3 60 68 102 137 450mm LXP##R08D* 4 80 90 133 n.d. 450mm LXP##R10D* 5 100 111 172 n.d. 450mm Power Factor > 0,9 For information on luminous flux for each current please see the photometric user guide on our webpage. Housing is all in aluminum construction, all components are 100% mercury free and totally recyclable. LED Lightbars applied on an aluminum extrusion designed for best thermal management thank to the BetaLED AirFlow Technology. This system ensures long life and maximum yield. Exclusive Colorfast DeltaGuard, finish features an E-Coat epoxy primer with an ultra-durable silver powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. The finish is covered by our DeltaGuard 10 year limited warranty. LED LightBar made of 20 diodes tested, with every single optic, according to the CEI EN 62471 standard for photobiological safety of lamps and lamp systems. Light system rated power between 40 and 100 LEDs, 4000 K Color temperature, CRI 75. available also in 5700 K and 3500 K color Temperature LED. Main dissipation body in extruded aluminum with an integrated printed gasket designed around the geometry of the lenses to guarantee an IP66 degree of protection. High-performance and precision lenses made of BetaLED NanoOptic patented technology. Photometric performance and curves selectable for any application requested. Internal high-performance and reliability electronic constant current driver, set at 525mA driving current (as standard version), available also with driving current at 350mA, 700mA. Recessed ceiling mounting system. Type: RL-DK-FRM. Ten years limited warranty. Insulation Class I. Degree of Protection IP66. Power factor > 0,9. Compliant with: EN60598-1, EN60598-2-2. Operating temperature : -40 C + 50 C (depending on pilot current used). Rated Voltage: 220-240Vac (capable 120-277Vac) 50 60Hz.
Available options Description Available up to Notes G Flux dimming control K D# Flux dimming control with occupancy sensor Power line control system with dimmable driver (dipending on model) Consult factory for available configurations S Two levels option virtual mid-night R Integral dimming system with plants including flux regulators D 0-10V dimmable driver See Control Systems spec sheets on our webpage. Driver current Accessories: - BRDSPK: Bird Spikes Colours: Standard Finish 25K hr Mod. 60 LED 50K hr 100K hr Silver White Black Bronze L 70 Life* (hours) 350 ma 0,95 0,90 0,81 >150.000 525 ma 0,94 0,89 0,77 129.000 700 ma 0,93 0,87 0,74 111.000 * Based on fixtures operating at 25 C. Silver Bronze Option D: 0-10V Dimming Option 0-10V Current (ma) System Watts Multiplier Lumen Multiplier 1,2 75 0.19 0.46 1.8 125 0.33 0.56 2.0 150 0.40 0.61 2.3 175 0.48 0.66 2.8 225 0.62 0.76 3.3 275 0.77 0.86 3.8 325 0.91 0.96 4.0 350 1.00 1.00 4.8 425 1.20 1.16 5.3 475 1.35 1.26 5.7 525 1.51 1.40 6.0 550 1.56 1.41 6.3 575 1.64 1.46 6.7 625 1.78 1.56 7.5 700 2.03 1.71
Photometric Diagram The following Photometric diagram are expressed in cd/klm, are referred to photometric reliev performed by independent labs. For photometric calculation make sure to apply a service factor like 0,9 on light emission. AC Optic PR Optic TM Optic
TS Optic QVM Optic QVS Optic
FS Optic 40 Optic