Single Fiber Arc Fusion Splicer FSM 60S

Single Fiber FSM 60S

Single Fiber SPECIFICATIONS FSM 60S STANDARD PACKAGE OPTIONAL ITEMS ACCESSORIES RESISTANCE FEATURES STANDARD PACKAGE & OPTIOINAL ITEMS TOP VIEW MGS-06 DETACHABLE WORK TABLE Fujikura Asia Ltd. Fujikura Europe Ltd. AFL Telecommunications

Single fiber Arc fusion splicer FSM-60S Tough. Reliable. Compact. 1/20

Features Tough Shock resistance Dust resistance Rain resistance Compact 136W * 161D * 143H [mm] 2.3kg with AC adapter 4.1 TFT color LCD Reliable Core alignment with PAS technology Longer battery operation 2/20

Features Tough Shock resistance Bottom surface drop of 76cm (30inch) The splicing unit, after a drop of 76cm, such that the bottom surface of the unit is struck parallel to the impact surface should be capable of producing splices which meet the loss, reflectance and yield requirements. - Abstract from Telcordia GR-765 CORE [135] Bottom Surface Drop Elastomer rubber protectors 3/20

Features Tough Dust resistance Exposure to Dust (0.1 500mm Alumina Silicate) The equipment, after below condition, shall be capable of producing splices which meet the loss, reflectance and yield requirements. The equipment is placed in a 1 cubic foot box with total 6 teaspoons of dry 0.1-500 mm hydrated Alumina Silicate.. Airblow is introduced for 12mins to the box for the powders to fully circulate in the box. -Telcordia TR-NWT-000264 modified harder by Fujikura FSM-60S covered with powder 4/20

Features Tough Rain resistance Artificial Rain of R=10mm/hr for 10mins. The splicing unit, fully-dried condition after an artificial rain condition (10mm/hr, 10min), should be capable of producing splices which meet the loss, reflectance and yield requirements. - Abstract from JIS C 0034 (JIS C 60068-2-18) Ra.1 FSM-60S in the rain test 5/20

Features Reliable Core alignment with history proven PAS technology. Y ALIGNI NG LED Focal plane PAS: Profile Alignment System CMOS Camera 6/20

Frequency FSM-60S Features Reliable Splicing performance Splicing time SM FAST SM AUTO AUTO 9 sec 10sec 13sec Splice loss (Typical) SMF 0.02dB MMF 0.01dB DSF 0.04dB NZDSF 0.04dB 20 15 10 5 0 Fiber : SMF28 Ave : 0.01 db Std. : 0.006 db N = 30 0.00 0.01 0.02 0.03 0.04 Splice loss [db] The data stated here was obtained at a test labs. Splicing result in the actual field with unexpected factors may be differ to this. 7/20

Features Reliable Longer battery operation 160 cycles (splice & tube heat) / charge. New circuit design with less energy consumption. 8/20

Features Compact Basic dimensions 136W x 161D x 143H [mm] 2.3kg with AC adapter 4.1 TFT color LCD 9/20

Other features Fiber holder system Inter-changeable fiber holding system Conventional Sheath-clamp User-friendly Fiber Holder Inter-changeable CLAMP-S60A, -S60B, -S60C FH-60-250, -900 10/20

Other features Detachable work-table Carrying case with detachable work table. Detached from carrying case Splicer and equipment fixed to tray. 11/20

Other features Software upgrade via Internet. USB cord FSM-60S Internet-connected PC at customer site 12/20

Other features Operation via PC FSM-60S Splicing operation Image capture Data communication 13/20

Specifications Item Specifications Applicable fibers SMF, MMF, DSF, NZDSF etc. Cladding dia./ Sheathe dia. 80 to 150 mm / 100 to 1000mm Splice mode Total 100 modes Automatic fiber identification SMF, MMF, NZDSF Splice loss estimate Equipped Attenuation splice 0.1dB to 15dB by 0.1dB step Splice result storage Last 2000 splices Viewing methods 2 axis 2CMOS camera with 4.1 LCD Tension test 1.96 to 2.25N Protection sleeve 60mm, 40mm and Fujikura micro sleeves Diagnostic function Equipped 14/20

Specifications Item Specifications USB port for PC connection Operating condition USB 1.1 Mini-B Altitude : 0 to 5,000m above sea level Wind : 15m/sec Temperature : -10 to 50deg C Humidity : 0 to 95%RH, non-dew 15/20

Components Battery BTR-08 AC Adapter ADC-13 Electrode ELCT2-20A Arc fusion splicer FSM-60S Carrying case CC-24-60S AC Cord ACC-XX Charge Cord DCC-14 USB Cable USB-01 Magnifier MGS-06 J-plate JP-05 Video Instruction manual V-60S-E Quick reference guide M-60S/18S-E Warning & Cautions W-60-E DC Cord DCC-12/13 16/20

Accessories PS-02 Primary Coat Stripper (for 250mm fiber) JS-01 Nylon Jacket Stripper (for 900mm fiber) CT-30, -30A, -30B High Precision Fiber Cleaver HJS-02 Thermal Jacket Stripper (for fiber holder system) Protection sleeves 17/20

Comparisons to FSM-50S Applicable fiber Functions FSM-50S FSM-60S Cladding dia. / Sheathe dia. Splice loss SM/MM/DS/NZDS 80-150um / 100-1000um SM:0.02dB / MM:0.01dB DS & NZDS:0.04dB Typical splice time (SM) 9sec 9sec (SM Fast mode) Typical heating time (FP-03) 35sec 30sec Fiber magnification 295X / 147X 300X / 187X Viewing method 5.6 color LCD monitor 4.1 color LCD monitor No. of splice/heat per battery 80 cycles (S battery) 160 cycles Electrode life 1000 arc-discharges 2500 arc-discharges Dimensions 150Wx150Dx150H [mm] 136Wx161Dx143H [mm] Weight (with AC adapter) 2.8kg 2.3kg 18/20

Comparisons to FSM-50S Features FSM-50S FSM-60S Shock-resistance *1 - Bottom surface drop of 76cm Dust resistance *1 - Exposure to dust (0.1-500mm Alumina Silicate) Rain-resistance *1 - R=10mm/hr for 10mins. Not compliant Not compliant Not compliant Tested Tested Tested Fiber holder capability No Available Carrying case with detachable work table No Equipped Software upgrade via internet No Available *1 : Carried out in Fujikura lab in Japan with wind-protector closed. The shock resistance, Dust resistance and Rain resistance tests do not guarantee that the product will not be damaged under these conditions. 19/20