The Norwegian Public Roads Administration



Similar documents
High Visibility Clothing

Road Transport Authority Information Bulletin

Legal Requirements for. Motor Vehicles and Trailers. according to ECE Regulation 48. Our Ideas, Your Success. Customized Solutions

The Delivery Hub health, safety and environment Raising the bar 2 Traffic management entry and exit

Get your lights right. What you need to know about fitting and using additional vehicle lighting

E&P HYDRAULICS Remote control EPRC-01 Level System Camper

This section deals with mandatory and optional equipment for your vehicle as well as suggestions for safer road use.

EN471 technical brochure

GUIDELINES. for oversize and overmass vehicles and loads MAY Government of South Australia. Department for Transport, Energy and Infrastructure

Guidelines for Traffic Controllers

Vehicle Standards Instruction (General 18.0) Projecting Loads Released January 2014

Traffic controllers and speed zones

International Fellowship of Chaplains

Operations ODO 27.0 Traffic Management

DRIVING TEST POSSIBLE QUESTIONS & ANSWERS.

OPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS

UNTIL FURTHER NOTICE THE USE OF THE GREEN LIGHTS AND SIRENS ARE SUSPENDED AS DECIDED BY THE RCCF COMMITTEE.

Light and its effects

OFFICE OF THE NATIONAL COMMANDER CIVIL AIR PATROL UNITED STATES AIR FORCE AUXILIARY MAXWELL AIR FORCE BASE, ALABAMA

Road safety matters Guidance for parents of children aged 7 11

W150: Miniature photoelectric switch series with completely integrated electronics

The Foundation User Manual LED Battery Slim Par Fixture (RGBA, DMX 7Ch/4CH)

SBC90. Abrasive Blast Cabinet Assembly & Operating Instructions

RADAR SPEED DISPLAYS.

Laserlyte-Flex Alignment System

Drayton Digistat +2RF/+3RF

Bathroom Cabinet. Installation & User Guide. Illuminated Mirrors.

Inwall 4 Input / 4 Output Module

Group R-70 to R-75: only Vauxhall. Subject. Sound Package. Vehicles. Omega-B (only Saloon) General

Product and functional description

POINTS POSITION INDICATOR PPI4

AUSTRALIAN CAPITAL TERRITORY Road Transport (Dimension and Mass) ACT 1990 OVERSIZE VEHICLES EXEMPTION NOTICE INSTRUMENT NO.

Regulations relating to pedestrian and vehicle traffic (traffic rules)

TS-E24mm f/3.5l TS-E45mm f/2.8 TS-E90mm f/2.8 Instructions

NIGHTWEAR AND FIRE. A Guide to Nightwear (Safety) Regulations. Contents

User s manual FLIR VP50/VP52 Non-contact AC voltage detector

Flame Direct Attach UV-VIS Integrated Sampling System Installation and Operation Instructions

Modifying the Yaesu FT-847 External MHz Reference Input

How to connect your D200 using Bluetooth. How to connect your D200 using GPRS (SIM Card)

LED NarrowStik LED LC-Stik

Operating instructions Diffuse reflection sensor. OJ50xx / / 2004

SAFELIGHT FILTERS AND DARKROOM LAMPS

KVT-729DVD INSTALLATION MANUAL

FREQUENTLY USED CODES

User Installation Guide

Ministerial Declaration (Loaded Silage Trailer) Order 2013

When you switch off your system, or mute the sound, the red indicator light appears immediately, indicating that the subwoofer is not in use.

Cycle Safety. Some tips on safer cycling. Údarás Um Shábháilteacht Ar Bhóithre Road Safety Authority

Multi-function Card. 1 Description. 2 Technical data ESSK General. 1.2 Application example

Mobile use, radio signals and health

The Jeans Collection

EF-S18-55mm f/ IS II COPY ENG. Instruction

HIGH VISIBILITY CLOTHING FOR HEAVY & HIGHWAY CONSTRUCTION

EF-S18-135mm f/ IS

Shutter Speed in Digital Photography

Isola Steel Gutters Strength and design for extreme climate!

FLAME RESISTANT (FR) NFPA 70E NESC OSHA ASTM F1506. CSA Z462 (Canada) Secondary Protection from Electric Flash fire hazards

1 Safety instructions. 2 Device components. 3 Function. Leader in Led solutions. Compact presence detector. Operating instructions

Portable Grinder. Given a properly adjusted portable grinder, instruction and demonstration of use, each student will be able to:

Operating instructions Diffuse reflection sensor with background suppression O1D101 O1D / / 2012

NAIT DEVICE STANDARD FOR CATTLE 25 SEPTEMBER 2014

Ontario Emergency Medical Services Section 21 Sub Committee. Emergency Medical Services Guidance Note #5

Estimating Lengths in Metric Units

Radio Thermostat Clock Part Number: Installation & User Instructions. Suitable for all Ferroli Combination Boilers

Interference. Physics 102 Workshop #3. General Instructions

Filters for Black & White Photography

LASER-PROTECTION INFORMATION

SECTION 1: REQUIREMENTS FOR CERTIFICATES OF COMPLIANCE FOR CLASSES OF RADIATION SOURCES

Equipment Lighting and Visibility Requirements

Installation handbook. AutroBeam 25 Beam detector

Video surveillance camera Installation Guide

sensors Miniature Sensors - S100 The universal miniature photoelectric sensor

INFRARED QUARTZ WALL HEATER

GUIDE TO A PERFECT MEN S SHIRT FIT

Honda Motor Europe Motorcycles 470 London Road, Slough, Berkshire, SL3 8QY England

EF24-105mm f/4l IS USM

CHAPTER 2 TRAFFIC SIGNS AND HIGHWAY MARKINGS

Service Standard Protective Clothing and Accessories

TRAFFIC MANAGEMENT PLAN

Wide Range InfraRed (IR) Thermometer with Type K input and Laser Pointer

» FLAME RETARDANT. You can find more flame retardant facts and information about certifications etc. on our website

DOCUMENT. Introduction WG2/01 SEPTEMBER Future CE marking requirements

Derbyshire Constabulary GUIDANCE ON THE ISSUE OF TRAFFIC OFFENCE REPORTS AND VEHICLE DEFECT RECTIFICATION SCHEME POLICY REFERENCE 05/035

DALI DIM/CONVERTER CONTROL (DC NV) 1 10V (0-10 V) analog DALI Converter with (Multi-) Sensor-control and 1 and 2-Switch dim functions

SC, FC and ST * Hot Melt Fiber Optic Connectors

City Of Cincinnati Public Vehicle Squad Rules & Regulations For Taxicab Drivers

CHAPTER 5-A. Bicycle and Skateboard Ordinance

INDICATOR LAMPS & LED REPLACEMENT LAMPS

Temporary Traffic Management

MTX-D, Boost/Shift Gauge

DVI DA2 and DVI DA 4 User Guide

TECHNICAL BULLETIN. Meritor WABCO Cab Leveling Valves and Chassis Leveling Valves. How the Cab Leveling and Chassis Leveling Valves Work

LASER DIAGRAM TABLE OF CONTENTS. SKY Technologies Inc. Laser Diagram. Technical Specifications. Laser Operation.

RAILWAY EQUIPMENT REFLECTORIZATION RULES

VS-0202 VS User Manual

Length measuring instruments

SCREENLOGIC INTERFACE WIRELESS CONNECTION KIT

Transcription:

The Norwegian Public Roads Administration Responsible unit: Executive officer/telephone: Our reference: Your reference: Our date: Directorate of Public Roads Øystein Buran / 22073599 15/211378-6 20.05.2016 NA CIRCULAR 2015/12 Amendment of requirements for high visibility warning clothing and signalling boards in handbooks N301 and R310 New technical requirements are being introduced for the design of high visibility warning clothing. New technical requirements are being introduced for the design of jackets for manual traffic direction. Requirements are being introduced for high visibility trousers for manual traffic direction. New requirements are being introduced for the use of signalling boards. New technical requirements are being introduced for signalling boards. Breaks for traffic directors have been clarified. This circular replaces the following sections in Handbook N301 "Work on and alongside roads" (2012/2014) and Handbook R310 "Road Traffic Safety Equipment" (2011/2014): - Provision 3.5.2.2 in section 3.5.2 "Requirements for anyone directing traffic manually" in N301 - Section 3.7.1 "Personal protective equipment" in N301 - Section 4.2.2 "Signalling boards" in R310 - Section 4.4 "Personal protective equipment" in R310 Transitional scheme All requirements are hereby applicable. A transitional period will be granted for requirements for high visibility warning clothing, jackets for manual traffic direction and signalling boards. Equipment pursuant to the preceding provisions must not be used after 1 Postal address Telephone: 02030 Office Address Billing Address The Norwegian Public Roads Brynsengfaret 6A The Norwegian Public Roads firmapost@vegvesen.no 0667 OSLO Nationwide accounts Org.no: 971032081 9815 Vadsø

2 January 2018. Equipment pursuant to both provisions may be used during the transitional period. High visibility warning clothing NS-EN 471:2003+A1:2007 "High-visibility warning clothing for professional use" has been withdrawn and replaced by NS-EN ISO 20471:2013 "High visibility clothing Test methods and requirements". Section 3.7.1 "Personal protective equipment" in N301 and section 4.4.1 "Workwear" in R310 are replaced in their entirety with the following: Anyone carrying out work on/alongside to public roads open to general traffic must wear class 3 high visibility warning clothing compliant with NS-EN ISO 20471. Combination of garments: It is possible to combine garments with a lower visibility class in order to achieve class 3 visibility. In this case, the garments together must be approved for a higher visibility class. This must be specified in each individual garment. Traffic direction Jackets for manual traffic direction Section 4.4.2 "Jackets for manual traffic direction" in R310 is replaced in its entirety with the following: Colours: High visibility jackets shall have a fluorescent red-orange mid-piece and side panels and sleeves of fluorescent yellow. The cuffs and the bottom part of the jacket must be fluorescent red-orange. The reflective strip must emit white light. Reflectors: A 25 mm wide reflective strip must pass from the shoulders and down to the lower part of the sleeves, front and rear. All the yellow and red-orange sections must be separated using a 50 mm wide reflective strip. There must be a 50 mm wide reflective strip on the bottom part of the sleeve, a 50 mm wide reflective strip around the waist, and a 50 mm wide reflective strip which passes over both shoulders and down to the waist. The reflective strip which passes over the shoulders must be centred on the shoulders. See the diagram with dimensions. Other points: Such jackets shall not have extremely visible logos or other departmental or company markings. A plastic pocket 6x9 cm in size for an ID card is permitted on the left sleeve. It is also possible to place a manufacturer's label 3x3 cm in size on the jacket.

3 Use of signalling boards The provision 3.5.2.2 in section 3.5.2 "Requirements for anyone directing traffic manually" in N301 is replaced in its entirety with the following: Personnel directing traffic manually in connection with roadworks must wear a specific type of high visibility jacket in order to improve their visibility. High visibility trousers must also be worn. This jacket must only be worn when directing traffic manually. Anyone directing traffic manually is particularly vulnerable, and it is important for the traffic to be directed correctly and clearly. Anyone directing traffic must stand in a position clearly visible to road users and have a complete overview of traffic at any points of conflict. One person must not be responsible for more than one point of conflict. If the section is more than approximately 50 metres long, two people must direct the traffic. (This will often be appropriate on shorter sections as well.) If there is insufficient visual contact, there must be contact in another way as well, e.g. using radios or telephones. The traffic must be stopped by using a signalling board with a red flashing light. When the traffic is to be stopped, the person must stand facing the traffic to be stopped. The signalling board is held in the right hand and raised with the red side facing the traffic. The left hand is also moved up and down in order to signal to road users to reduce their speed. The signalling board must always have a red flashing light when it is used to stop traffic. When the traffic is clear to pass, the signalling board must be lowered, with the red side facing away from road users. The light must always be switched off when the signalling board is lowered. It is also necessary to signal clearly with the left hand to indicate that road users may proceed.

4 The red light must be dimmed to a lesser brightness in darkness, fog or other conditions that amplify the effect of the light. Signalling boards may be used for short-term stopping of traffic or inspections carried out by the Norwegian Public Roads Administration. Signalling boards must otherwise only be used by people directing traffic manually. One person must not direct traffic manually for a consecutive period of more than 2 hours without a break. If traffic is required to be directed manually for longer periods, it is necessary to ensure that the person directing the traffic is relieved. Driving an escort vehicle does not constitute a break. The speed limit must not exceed 50 kph when traffic is being directed manually. Design Section 4.2.2 "Signalling boards" in R310 is replaced in its entirety with the following: A signalling board is made up of a handle and a sign part. Signalling boards must have a total length of 40 cm, while the diameter of the sign disc must be 20 cm. The sign part must meet requirements for a class 3 red reflective film on one side. The other side must be neutral grey. There must be a light which shines red in the middle of the red side. The red light must only be capable of emitting flashing red light. It must be simple to switch off and on. It must have a manual dimmer function to switch easily between two different brightness levels. The red light must be compliant with NS-EN 12368:2015 "Traffic control equipment. Signal heads" with regard to the following functional requirements: Aperture: 10 cm Brightness: Min 500cd/Max. 1000cd Dimming: Min 100cd/Max. 200cd Distribution of brightness: Wide Beam signal (type W), or Medium wide beam signal (type M) Flash frequency: approx. 60 ±5 flashes/min. Flash time between 250 and 500 msec. Light source: LED Red colour: C red compliant with NS-EN 12352:2006 "Traffic control equipment. Warning and safety light devices"

5 Department of Public Roads and Transport With regards Jane Bordal Director Jacob Trondsen Tekst for godkjenning settes inn ved ekspedering.