"FREON" 502 Refrigerant



Similar documents
Du Pont Material Safety Data Sheet

Du Pont Material Safety Data Sheet

R134a Refrigerant

Du Pont Material Safety Data Sheet

DuPont FE-36 fire extinguishing agent

DuPont Freon 22 Refrigerant

Material Safety Data Sheet

The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.

DuPont ISCEON MO89 refrigerant

: DuPont SUVA 407C Refrigerant

Material Safety Data Sheet

Trade Name of this Product Isopropyl Rubbing Alcohol 91% USP. Corporate Compliance Team 1666 East Touhy Avenue

DuPont SUVA 134a refrigerant

Material Safety Data Sheet

SAFETY DATA SHEET FILE NO.: , DRY CIDER VINEGAR SDS DATE: 05/05/15

OFF! CLIP-ON MOSQUITO REPELLENT

: DuPont ISCEON MO79 refrigerant

MATERIAL SAFETY DATA SHEET PAGE 1

Propane Fuel. Material Safety Data Sheet

CAS NO. A >94.19 % WT >94.19 % VOL SARA 313 NO

Material Safety Data Sheet Material Name: Recycled Halon 1301

* * * EMERGENCY OVERVIEW * * * High pressure gas. Can cause rapid suffocation. Can increase respiration and heart rate.

: DuPont SUVA 134aUV Leakdetect

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING. Types : ASHRAE Refrigerant number designation: R-507

: DuPont SUVA 410A Refrigerant

WINDEX ORIGINAL GLASS CLEANER WITH AMMONIA-D

WINDEX ORIGINAL GLASS CLEANER

Material Safety Data Sheet Brilliant Green, 1% Aqueous. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET MSDS No.: 007

The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Sulfuric Acid Solutions 0.01N 0.125N (>1% w/w) Section 1 - Chemical Product and Company Identification

WINDEX COMMERCIAL LINE GLASS CLEANER WITH AMMONIA- D

DOW CORNING CORPORATION Material Safety Data Sheet

Page Number:

PLEDGE MULTI-SURFACE CLEAN & DUST

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

KALREZ perfluoroelastomer semi-finished parts and shapes

DOW CORNING CORPORATION Material Safety Data Sheet

GLADE AEROSOL SPRAY - LAVENDER & VANILLA

Material Safety Data Sheet

Material Safety Data Sheet Wix Diesel Fuel Additive

MATERIAL SAFETY DATA SHEET. CAPTURE Carpet Dry Cleaner - Advanced Formula

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Phosphoric Acid mg/m3 1 mg/m3 3 mg/m3

OFF! DEEP WOODS SPORTSMEN INSECT REPELLENT I (PUMP SPRAY)

Material Safety Data Sheet. NFGA Rating: Health: 1 Flammability: 1 Instability: 0. HMIS Rating: Health: 1 Flammability: 1 Physical Hazard: 0

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET HelioBond PVA 301AT

Material Safety Data Sheet Buffer Solution ph Section 1 - Chemical Product and Company Identification

22 APR 2010 <MSDS_ID>300088</MSDS_ID> MATERIAL SAFETY DATA SHEET. <Product> PHENOLPHTHALEIN INDICATOR SOLUTION # HR </Product> Part#: N/A

Material Safety Data Sheet

Material Safety Data Sheet

1. Chemical Product and Company Identification. 2. Hazardous Ingredients

The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.

Material Safety Data Sheet Dymel 152a ( DYMEL is a registered trademark of DuPont)

Material Safety Data Sheet

Magnesium Carbonate, Lite, Powder USP

HYDROGEN PEROXIDE SOLUTION 3%

MATERIAL SAFETY DATA SHEET PRODUCT NAME:

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET NAME OF PRODUCT MSDS DATE: 04/01/11

Material Safety Data Sheet Titanium Dioxide Pigment

MATERIAL SAFETY DATA SHEET Page 01 of 05

MATERIAL SAFETY DATA SHEET

DOW CORNING CORPORATION Material Safety Data Sheet

Material Safety Data Sheet. Section 1 - Chemical Product and Company Identification

Methane in Air % to 2.5%

MATERIAL SAFETY DATA SHEET WORKING COPY

Material Safety Data Sheet. Chemical Product and Company Identification Product Name or Number:

Material Safety Data Sheet

SCRUBBING BUBBLES VANISH CONTINUOUS CLEAN DROP- INS

Du Pont Material Safety Data Sheet

**** MATERIAL SAFETY DATA SHEET **** STABIL Fuel Stabilizer **** SECTION 1 - CHEMICAL PRODUCT AND MANUFACTURER IDENTIFICATION ****

1. PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET. SODIUM HYDRIDE, 65% dispersion in mineral oil, toluene soluble bags

Material Safety Data Sheet Aluminum Hydroxide Suspension. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET PRODUCT: CFW Uncoated, CFW Coated (UL-15), CFW Coated (A-12) REVISION DATE: December 9 th, 2008

MATERIAL SAFETY DATA SHEET FILE NO.: B ZOOM Drain Care System (Liquid Drain Opener) MSDS DATE:9/17/08

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

WINDEX MULTI-SURFACE CLEANER - VINEGAR

Material Safety Data Sheet

Material Safety Data Sheet Calcium bromide hydrate

MATERIAL SAFETY DATA SHEET Page 1 of 7 Revised 1/17/01 BRIJ 35 SP Replaces 2/22/99 UNIQEMA As of 2/16/01. Material Name: BRIJ(R) 35SP

Material Safety Data Sheet

Material Safety Data Sheet

Safety Data Sheet Dust Destroyer Special Application Compressed Gas Duster

Section 1 - Chemical Product and Company Identification

SECTION 1 - PRODUCT IDENTIFICATION

1. IDENTIFICATION 2. HAZARDS IDENTIFICATION. Serious eye damage/eye irritation Category 2. Physical State Liquid

(616) Ann Street N.W. Emergency Phone Grand Rapids, MI 49504

MATERIAL SAFETY DATA SHEET

Transcription:

Information in this format is provided as a service to our customers and is intended only for their use. Others may use it at their own discretion and risk. The MSDS format adheres to U.S. standards and regulatory requirements and may not meet regulatory requirements in other locations. This information is based upon technical information DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are gained. Please return to this website for the most current version. "FREON" 502 Refrigerant 2075FR Revised 5-OCT-1996 CHEMICAL PRODUCT/COMPANY IDENTIFICATION Material Identification "FREON" is a registered trademark of DuPont. Corporate MSDS Number : DU001047 Formula : CHClF2/CClF2CF3 (AZEOTROPE) Company Identification MANUFACTURER/DISTRIBUTOR DuPont Fluoroproducts 1007 Market Street Wilmington, DE 19898 PHONE NUMBERS Product Information : 1-800-441-7515 Transport Emergency : CHEMTREC 1-800-424-9300 Medical Emergency : 1-800-441-3637 COMPOSITION/INFORMATION ON INGREDIENTS

Components Material CAS Number % * 76-15-3 *ETHANE, CHLOROPENTAFLUORO- ("FREON" 115) 51.2 *METHANE, CHLORODIFLUORO- ("FREON" 22) 75-45-6 48.8 * Disclosure as a toxic chemical is required under Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR part 372. HAZARDS IDENTIFICATION Potential Health Effects Inhalation of high concentrations of vapor is harmful and may cause heart irregularities, unconsciousness, or death. Intentional misuse or deliberate inhalation can cause death without warning. Vapor reduces oxygen available for breathing and is heavier than air. Liquid contact can cause frostbite. HUMAN HEALTH EFFECTS: Overexposure to the vapors by inhalation may include temporary nervous system depression with anesthetic effects such as dizziness, headache, confusion, incoordination, and loss of consciousness. Higher inhalation overexposures to the vapors may cause temporary alteration of the heart's electrical activity with irregular pulse, palpitations, or inadequate circulation. Fatality from gross overexposure may occur. Skin contact with the liquid may cause frostbite. Individuals with preexisting diseases of the central nervous system, cardiovascular system, lungs or kidneys may have increased susceptibility to the toxicity of excessive exposures. Carcinogenicity Information None of the components present in this material at concentrations equal to or greater than 0.1% are listed by IARC, NTP, OSHA or ACGIH as a carcinogen. FIRST AID MEASURES First Aid INHALATION If large amounts are inhaled, immediately remove to fresh air. Keep persons calm. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician.

SKIN CONTACT In case of skin contact, flush with water for 15 minutes. Treat for frostbite if necessary by gently warming affected area. EYE CONTACT In case of eye contact, immediately flush eyes with plenty of water for 15 minutes. Call a physician. INGESTION Ingestion is not considered a potential route of exposure. Notes to Physicians Because of possible disturbances of cardiac rhythm, catecholamine drugs, such as epinephrine, should be used with special caution only in situations of emergency life support. FIRE FIGHTING MEASURES Flammable Properties Flash Point : Will not burn Flammable limits in Air, % by Volume LEL : Not applicable UEL : Not applicable Autoignition : 704 C (1299 F) Fire and Explosion Hazards: Cylinders are equipped with temperature and pressure relief devices but still may rupture under fire conditions. Decomposition may occur. Extinguishing Media As appropriate for combustibles in area. Fire Fighting Instructions Keep containers cool with water spray. Self-contained breathing apparatus (SCBA) is required if cylinders rupture or release under fire conditions. ACCIDENTAL RELEASE MEASURES Safeguards (Personnel) NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL) sections before proceeding with clean-up. Use appropriate PERSONAL PROTECTIVE EQUIPMENT during clean-up.

Accidental Release Measures Ventilate area - especially low places where heavy vapors might collect. Remove open flames. Use self-contained breathing apparatus (SCBA) for large spills. Comply with Federal, State, and local regulations for reporting releases. HANDLING AND STORAGE Handling (Personnel) Avoid breathing vapors. Avoid liquid contact with skin or eyes. Use with sufficient ventilation to keep employee exposure below recommended limits. Storage Clean, dry area. Do not heat above 52 deg C (125 deg F). EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls Use with sufficient ventilation to keep employee exposure below recommended exposure limits. Local exhaust should be used when large amounts are released. Mechanical ventilation should be used in low or enclosed places. Personal Protective Equipment Impervious gloves and chemical splash goggles should be used if contact is possible. Under normal manufacturing conditions, no respiratory protection is required when using this product. Self-contained breathing apparatus (SCBA) is required if a spill or release occurs. # Exposure Guidelines Applicable Exposure Limits ETHANE, CHLOROPENTAFLUORO- ("FREON" 115) PEL (OSHA) : None Established TLV (ACGIH) : 1,000 ppm, 6,320 mg/m3, 8 Hr. TWA AEL * (DuPont) : None Established METHANE, CHLORODIFLUORO- ("FREON" 22) PEL (OSHA) : None Established TLV (ACGIH) : 1,000 ppm, 3,540 mg/m3, 8 Hr. TWA, A4 AEL * (DuPont) : None Established * AEL is DuPont's Acceptable Exposure Limit. Where governmentally imposed occupational exposure limits which are lower than the AEL are in effect, such limits shall take precedence.

PHYSICAL AND CHEMICAL PROPERTIES Physical Data Boiling Point : -45.4 C (-49.7 F) Vapor Pressure : 169 psia at 25 deg C (77 deg F) Vapor Density : 3.92 at 25 deg C (77 deg F) (Air= 1) % Volatiles : 100 WT% Evaporation Rate : >1 (CCl4 = 1) Solubility in Water : 0.15 WT% @ 25 C (77 F) ph : Neutral Odor : Slight ethereal Form : Liquified gas Color : Clear, colorless Density : 1.22 g/cc at 25 deg C (77 deg F) - Liquid STABILITY AND REACTIVITY Chemical Stability Material is stable. However, avoid open flames and high temperatures. Incompatibility with Other Materials Incompatible with alkali or alkaline earth metals- powdered Al, Zn, Be, etc. Polymerization Polymerization will not occur. Other Hazards Decomposition : Decomposition products are hazardous. "FREON" 502 Refrigerant can be decomposed by high temperatures (open flames, glowing metal surfaces, etc.) forming hydrochloric and hydrofluoric acids, and possibly carbonyl halides. TOXICOLOGICAL INFORMATION Animal Data "FREON" 115 Inhalation 4-hour LC50: >800,000 ppm in rats Oral ALD : >1200 mg/kg in rats

The effects of a single inhalation exposure at high concentrations include rapid respiration and inactivity. Repeated exposure at lower levels produced no signs of toxicity. Exposure to 150,000 ppm with simultaneous epinephrine challenge produced cardiac arrhythmia in dogs. The effects of repeated ingestion include mild diarrhea, salivation and increased activity. No animal test reports are available to define carcinogenic developmental or reproductive hazards. The compound does not produce genetic damage in bacterial cell cultures but has not been tested in animals. "FREON" 22 Inhalation 4-hour LC50: 220,000 ppm in rats The compound is a skin irritant and a slight eye irritant, but is not a skin sensitizer in animals. Effects from single high exposures include central nervous system depression, anesthesia, rapid breathing, lung congestion and microscopic liver changes. Cardiac sensitization occurred in dogs at 50,000 ppm or greater from the action of exogenous epinephrine. No toxic effects or abnormal histopathological observations occurred in rats repeatedly exposed to concentrations ranging from 10,000 to 50,000 ppm (v/v). Long-term exposures to 50,000 ppm (v/v) of vapors produced organ weight increases and a decrease in body weight gain, but no increased mortality or adverse hematological effects. In chronic inhalation studies, HCFC-22, at a concentration of 50,000 ppm (v/v), produced a small, but statistically significant increase of late-occurring tumors involving salivary glands in male rats, but not female rats or male or female mice. In the same studies, no increased incidence of tumors was seen in either species at concentrations of 10,000 ppm or 1000 ppm (v/v). Long-term administration in corn oil produced no effects on body weight or mortality. HCFC-22 was mutagenic in some strains of bacteria in bacterial cell cultures, but not mammalian cell cultures or animals. It did not cause heritable genetic damage in mammals. A slight, but significant increase in developmental toxicity was observed at high concentrations (50,000 ppm) of HCFC-22, a concentration which also produced toxic effects in the adult animal. Based on these findings, and other negative developmental studies, HCFC-22 is not considered a unique hazard to the conceptus. Studies of the effects of HCFC-22 on male reproductive performance have been negative. Specific studies to evaluate the effect on female reproductive performance have not been conducted, however, limited information obtained from studies on developmental toxicity do not indicate adverse

effects on female reproductive performance at concentrations up to 50,000 ppm. ECOLOGICAL INFORMATION Ecotoxicological Information Aquatic Toxicity: "Freon" 22 48 hour EC50 - Daphnia magna: 433 mg/l DISPOSAL CONSIDERATIONS Waste Disposal Comply with Federal, State, and local regulations. Remove to a permitted waste disposal facility or reclaim by distillation. TRANSPORTATION INFORMATION Shipping Information DOT/IMO Proper Shipping Name : CHLORODIFLUOROMETHANE AND CHLOROPENTAFLUOROETHANE MIXTURE Hazard Class : 2.2 UN No. : 1973 DOT/IMO Label : NONFLAMMABLE GAS Shipping Containers Cylinders Ton Tanks REGULATORY INFORMATION U.S. Federal Regulations TSCA Inventory Status : Reported/Included. TITLE III HAZARD CLASSIFICATIONS SECTIONS 311, 312 Acute : Yes Chronic : No Fire : No Reactivity : No

Pressure : Yes HAZARDOUS CHEMICAL LISTS SARA Extremely Hazardous Substance: No CERCLA Hazardous Substance : No SARA Toxic Chemical - See Components Section OTHER INFORMATION NFPA, NPCA-HMIS NPCA-HMIS Rating Health : 1 Flammability : 0 Reactivity : 1 Personal Protection rating to be supplied by user depending on use conditions. ---------------------------------------------------------------------- The data in this Material Safety Data Sheet relates only to the specific material designated herein and does not relate to use in combination with any other material or in any process. Responsibility for MSDS : MSDS Coordinator > : DuPont Fluoroproducts Address : Wilmington, DE 19898 Telephone : (800) 441-7515 # Indicates updated section. End of MSDS