SECTION 1 - PRODUCT IDENTIFICATION

Transcription

1 Product Identification Physical Data Hazardous Components Fire and Explosion Hazard Data Reactivity Data Health Hazard Information Spill or Leak Procedures Handling Information Special Protection Information Other Regulatory Information Shipping Information SECTION 1 - PRODUCT IDENTIFICATION Product Name: MAC One-Step Developer Product Class: Proprietary Blend Date of Last Revision: August 5, 1996 SECTION 2 - PHYSICAL DATA SPECIFIC GRAVITY: 72 DEGREES F (WATER = 1) PHYSICAL FORM: CLEAR AMBER LIQUID LBS/GAL (WATER = 8.34): 8.86 lbs./gal SOLUBILITY IN WATER: Soluble ph OF PRODUCT: FREEZE POINT (F): 32 DEGREES F ODOR: MILD, SWEET

2 SECTION III - HAZARDOUS COMPONENTS INGREDIENT CAS OSHA PEL ACGIH TLV % BY WT OTHER LIMITS DOT# Benzyl Alcohol N/D N/D REFERENCES: 29CFR , ACGIH "Threshold Limit Values For Chemicals in the Workplace", National Toxicology Program Annual Report, International Agency For Research on Cancer Monographs, and 40CFR Part 372. ALL COMPONENTS OF THIS PRODUCT ARE IN COMPLIANCE WITH TSCA. SECTION IV - FIRE AND EXPLOSION HAZARD DATA FLASH POINT: > 200 DEGREES T.C.C. EXTINGUISHING MEDIA: CARBON DIOXIDE, FOAM, AND ABC DRY POWDER SPECIAL FIRE FIGHTING PROCEDURES: USE AIR SUPPLIED BREATHING EQUIPMENT FOR ENCLOSED AREAS. - COOL EXPOSED CONTAINERS WITH WATER SPRAY - AVOID BREATHING VAPOR AND FUMES SECTION V - REACTIVITY DATA STABILITY: STABLE CONDITIONS TO AVOID: STRONG OXIDIZERS HAZARDOUS DECOMPOSITION PRODUCTS: MAY PRODUCE CARBON MONOXIDE AND CARBON DIOXIDE. HAZARDOUS POLYMERIZATION: WILL NOT OCCUR INCOMPATIBILITY: MAY REACT WITH STRONG MINERAL ACIDS TO PRODUCE HEAT. WILL REACT WITH STRONG OXIDIZING MATERIAL.

3 SECTION VI - HEALTH HAZARD INFORMATION ROUTES OF ENTRY: SKIN: PROLONGED CONTACT INHALATION: PROLONGED BREATHING OF MISTS OR CONCENTRATED VAPORS INGESTION: IF SWALLOWED HEALTH HAZARDS: SKIN: MAY CAUSE SKIN DRYNESS, IRRITATION INHALATION: RESPIRATORY IRRITATION, COUGHING, DIFFICULTY IN BREATHING INGESTION: NAUSEA, VOMITING AND ABDOMINAL PAIN EYES: TEARING, REDNESS SIGNS AND SYMPTOMS OF EXPOSURE: SKIN: SKIN DRYNESS, TISSUE IRRITATION INHALATION: RESPIRATORY IRRITATION, COUGHING, DIFFICULTY IN BREATHING. INGESTION: IF SWALLOWED EYES: TEARING REDNESS MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: DERMATITIS. EMERGENCY AND FIRST AID PROCEDURES: INGESTION - RINSE MOUTH WITH WATER. SEEK MEDICAL ATTENTION. DO NOT INDUCE VOMITING! EYES - WASH CONTINUOUSLY FOR 15 MINUTES WITH LARGE AMOUNTS OF WATER. CONTACT PHYSICIAN IF IRRITATION RESULTS. INHALATION - REMOVE TO FRESH AIR. SKIN - WASH WITH SOAP AND WATER. SECTION VII - SPILL OR LEAK PROCEDURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED SMALL SPILL: FLUSH AREA WITH WATER.

4 LARGE SPILL: USE SAWDUST, OR VERMICULITE TO CONTAIN SPILL AREA. PUT ABSORBED MATERIAL IN APPROVED CONTAINER FOR DISPOSAL. DISPOSE OF IN ACCORDANCE WITH STATE, LOCAL AND FEDERAL REGULATIONS. WASTE DISPOSAL METHOD: CONTAMINATED ABSORBENT MATERIAL MUST BE DISPOSED OF IN ACCORDANCE WITH STATE, LOCAL, AND FEDERAL REGULATIONS REGARDING CHEMICAL DISPOSAL. COMPLIANCE INCLUDES, BUT IS NOT RESTRICTED TO, THE CLEAN WATER ACT, THE CLEAN AIR ACT, AND THE RESOURCE CONSERVATION AND RECOVERY ACT. SECTION VIII - HANDLING INFORMATION PRECAUTION MEASURES: KEEP FROM FREEZING. KEEP AWAY FROM STRONG OXIDANTS. KEEP AWAY FROM HEAT AND FLAME. EMPTY CONTAINER RETAINS VAPOR AND PRODUCT RESIDUE. OBSERVE ALL LABELED SAFEGUARDS. HAZARD WARNINGS: DO NOT TAKE INTERNALLY, MAY BE HARMFUL IF SWALLOWED. AVOID PROLONGED INHALATION OF HIGH CONCENTRATION OF MIST OR VAPOR. OTHER PRECAUTIONS: STORE IN ORIGINAL CONTAINER. KEEP CLOSED. FOLLOW STANDARD CHEMICAL HANDLING PROCEDURES. SECTION IX - SPECIAL PROTECTION INFORMATION TYPE VENTILATION: EFFICIENT EXHAUST VENTILATION SHOULD ALWAYS BE PROVIDED TO DRAW FUMES AND VAPORS AWAY FROM WORKERS TO PREVENT ROUTINE INHALATION. VENTILATION SHOULD BE ADEQUATE TO MAINTAIN THE AMBIENT WORKPLACE ATMOSPHERE BELOW THE TLV OF ANY ITEMS IDENTIFIED UNDER THE HAZARDOUS COMPONENTS SECTION. RESPIRATORY PROTECTION: WEAR A NIOSHA/MSHA APPROVED RESPIRATOR WHENEVER EXPOSURE TO FUMES OR VAPORS EXCEEDS THE TLV OF ANY ITEMS IDENTIFIED UNDER THE HAZARDOUS COMPONENTS SECTION. PROTECTIVE GLOVES: IMPERVIOUS GLOVES, SUCH AS NEOPRENE OR POLYVINYL ALCOHOL, SHOULD BE WORN WHEN HANDLING CHEMICALS. EYES: NIOSHA/MSHA APPROVED SAFETY GLASSES SHOULD ALWAYS BE WORN WHEN HANDLING CHEMICALS.

5 SECTION X - OTHER REGULATORY INFORMATION SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 (SARA) TITLE III REQUIRES SUBMISSION OF ANNUAL REPORTS OF RELEASE OF TOXIC CHEMICALS THAT APPEAR IN 40 CFR 372 (FOR SARA 313). THIS INFORMATION MUST BE INCLUDED IN ALL MSDSs THAT ARE COPIED AND DISTRIBUTED FOR THIS MATERIAL. COMPONENTS PRESENT IN THIS PRODUCT AT A LEVEL WHICH COULD REQUIRE REPORTING UNDER THE STATUTE ARE: NONE SECTION XI - SHIPPING INFORMATION D.O.T. Shipping Name: NA Hazard Class: None U.N. Number: None Health 1 Flammability 0 Reactivity 0 PPE B DISCLAIMER: THE INFORMATION CONTAINED IN THIS MATERIAL SAFETY DATA SHEET RELATES ONLY TO THE SPECIFIC PRODUCT DESIGNATED HEREIN. WE BELIEVE THAT THE INFORMATION CONTAINED IS CURRENT AS OF THE DATE OF THE MATERIAL SAFETY DATA SHEET. HOWEVER, THE INFORMATION IS PROVIDED WITHOUT ANY REPRESENTATION OR WARRANTY, EXPRESSED OR IMPLIED, REGARDING ITS ACCURACY OR CORRECTNESS. SINCE THE USE OF THIS INFORMATION AND OF THESE OPINIONS AND THE CONDITIONS OF THE USE OF THE PRODUCT ARE NOT WITHIN THE CONTROL OF SOUTHERN LITHOPLATE, INC., IT IS THE USER'S OBLIGATION TO DETERMINE THE CONDITIONS OF SAFE USE OF THE PRODUCT. THE INFORMATION CONTAINED IN THIS MATERIAL SAFETY DATA SHEET RELATES ONLY TO THE SPECIFIC PRODUCT DESIGNATED HEREIN. WE BELIEVE THAT THE INFORMATION CONTAINED IS CURRENT AS OF THE DATE OF THE MATERIAL SAFETY DATA SHEET. HOWEVER, THE INFORMATION IS PROVIDED WITHOUT ANY REPRESENTATION OR WARRANTY, EXPRESSED OR IMPLIED, REGARDING ITS ACCURACY OR CORRECTNESS. SINCE THE USE OF THIS INFORMATION AND OF THESE OPINIONS AND THE CONDITIONS OF THE USE OF THE PRODUCT ARE NOT WITHIN THE CONTROL OF SOUTHERN LITHOPLATE, INC., IT IS THE USER'S OBLIGATION TO DETERMINE THE CONDITIONS OF SAFE USE OF THE PRODUCT.