Contents EXPLORENT SURGICAL INSTRUMENTS Antrum Irrigation Cannulas...SIN-105 Antrum Rasps...SIN-110 Ostium Seekers, Bougies...SIN-115 Needles, Elevators, Knives...SIN-120 Antrum Curettes...SIN-125 Sinuscopy Trocars...SIN-130 Suction Tubes, Suction Elevator...SIN-135 Retractors and Spatulas...SIN-140 Biopsy Forceps for Nasal Mucosa...SIN-145 Sinus Forceps for Microsurgical Operations...SIN-180 Through-Cutting Forceps...SIN-185 SIN-190 Antrum Punches...SIN-195 SIN-196 Nasal Scissors...SIN-200 Circular Cutting Punches...SIN-205 Sinus Punches...SIN-210 SIN-215 Nasal and Sinus Specula...SIN-220 Flexible Tension Arm System...SIN-225 Arm System...SIN-230 Biopsy and Polyp Grasping Forceps...SIN-150 Suction Forceps...SIN-151 Antrum Grasping Forceps...SIN-155 Punch and Giraffe Forceps...SIN-160 Nasal Forceps...SIN-170 SIN-171 RICHARDS INSTRUMENTS Curettes, Probes, Elevators, Knives...SIN-405 Forceps, Punches, Scissors...SIN-410 Frontal Forceps...SIN-415 SIN-420 Suction and Irrigation...SIN-425 Sinus Surgery, SIN-000 7001
7002 W7053720_4-0
Antrum Irrigation Cannulas Models with long and short curved tubes Models with malleable tubes Sinus Surgery, SIN-105 7003
V. Eicken Antrum Irrigation Cannulas 149602 149603 149604 v. Eicken antrum cannula, 15 cm, Luer-lock, long curved, 2.5 mm outer diameter 3 mm outer diameter 4 mm outer diameter 149612 149613 149614 v. Eicken antrum cannula, 15 cm, Luer-lock, short curved, 2.5 mm outer diameter 3 mm outer diameter 4 mm outer diameter 149702 149703 149704 v. Eicken antrum cannula, 15 cm, Luer-lock, malleable, long curved, 2.5 mm outer diameter 3 mm outer diameter 4 mm outer diameter 7004 W7053720_4-0
Antrum Rasps Models with blunt and trocar tip Frontal sinus rasps, strong and slender pattern Sinus Surgery, SIN-110 7005
Antrum and Frontal Sinus Rasps 508101 Wiener antrum punch, diameter 6 mm, curved, with trocar tip, 19 cm 518110 518111 Wigand frontal sinus rasp, strong pattern slender pattern 508500 Watson-Williams antrum rasp, 23 cm, blunt 7006 W7053720_4-0
Ostium Seekers, Bougies S-shaped models Double-ended models Sinus Surgery, SIN-115 7007
Frontal Sinus Ostium Seeker 518725 Frontal sinus ostium seeker, double-ended, curved Ritter-Halle Frontal Sinus Bougie 507025 507030 507040 507050 Ritter-Halle frontal sinus bougie, 14.5 cm, 2.5 mm diameter 3 mm diameter 4 mm diameter 5 mm diameter Maxillary Sinus Ostium Seeker 518619 Maxillary sinus ostium seeker, double-ended, 19 cm, ball sizes: 1.2 mm and 2 mm diameter 7008 W7053720_4-0
Needles, Elevators, Knives Angular septum needle Antrum trocar needle, with different diameters Double-ended elevators. Micro elevators curved and angled. Suction elevator model Fontanelle knife, paranasal sinus surgery, round and sickle knives: - Straight and bayonet shaped shaft - With blunt and pointed tip - Curved to left and curved to right Sinus Surgery, SIN-120 7009
Septum Needle Moriyama Fontanelle Knife 301100 Septum needle, angled, 0.8 mm, Luer-lock Lichtwitz Antrum Trocar Needles 326820 Moriyama fontanelle knife, curved, 55 mm width, round tip, 20 cm 149315 149318 149320 Lichtwitz antrum trocar needle, 10 cm working length, 1.5 mm outer diameter 1.8 mm outer diameter 2.0 mm outer diameter Draf Micro Elevators Essentially facilitate duraplasty during endonasal surgery. Sickle Knives Sickle knife, 19 cm, double cutting, 518301 tip pointed 518302 tip rounded, blunt 518303 sharp tip, curved to left 518304 sharp tip, curved to right 339001 339002 339003 Draf micro elevator, sharp, 25 cm length, 15 cm working length, 1 mm width, slightly curved 3 mm width, slightly curved 3 mm width, strongly curved 339004 4 mm width, angled 253600 Sickle knife, pointed, 16 cm Draf Knives Free Elevator 339101 339102 Draf sickle knife, 19 cm, straight bayonet 315000 Free elevator, double-ended, 20 cm Gornes Suction Elevator 405800 Gornes suction elevator, with stylet, 3 mm tip, 19 cm 339201 339202 339301 339302 339401 339402 Draf round knife, 19 cm length, 1.5 mm diameter, straight 1.5 mm diameter, bayonet 2 mm diameter, straight 2 mm diameter, bayonet Draf incision flap knife, 19 cm length, straight bayonet 7010 W7053720_4-0
Antrum Curettes Antrum, frontal sinus curettes Round, oval and oblong models Double-ended, malleable models Sinus Surgery, SIN-125 7011
Coakley Antrum Curettes Antrum Curettes 503001 503002 503003 Coakley antrum curette, 17 cm, 7.5 mm width, size 1 = oval, slightly curved size 2 = oval, strong curved size 3 = oval, retrograde curved 503006 size 6 = triangular, strong curved 518001 518002 518003 Antrum curette, slightly curved, 19 cm, oval, size 1 = 7 mm size 2 = 8 mm size 3 = 9 mm 518101 Antrum curette, 19 cm, round, small size = 5 mm Coakley antrum curette, 17 cm, 6 mm width, 503004 size 4 = oval, slightly curved 503005 size 5 = oval, strong curved 518102 518103 Antrum curette, 19 cm, oval, small size = 6 x 3 mm oval, large size = 9 x 4 mm Faulkner Antrum Curette 504000 Faulkner antrum curette, double-ended, 21 cm, 5.5 7.5 mm inner diameter 518104 518105 Frontal sinus curette, 19 cm, oval, small size = 3 mm, 55 curved 90 curved Halle Antrum Curette 506001 506002 506003 Halle antrum curette, malleable, 21 cm, size 1 = 8 x 5.5 mm size 2 = 9 x 6 mm size 3 = 10 x 7 mm Antrum curette, 19 cm, small size = 6.8 mm, 518203 forward cutting 518204 backward cutting 7012 W7053720_4-0
Sinuscopy Trocars For use with sinuscopes diameter 2.7 mm, 3.0 mm, 4.0 mm Models with billshaped and oblique beak Sinus Surgery, SIN-130 7013
Sinuscopy Trocars 518503 Trocar and cannula for sinuscopy, 3.3 mm outer diameter, 7 cm cannula length, oblique beak, for use with 2.7 mm telescopes 518504 Trocar and cannula for sinuscopy, 4 mm outer diameter, 7 cm cannula length, oblique beak, for use with 3 mm telescopes Trocar and cannula for sinuscopy, 5 mm outer diameter, 8 cm cannula length, for use with 4 mm telescopes, 518400 billshaped beak 518500 oblique beak 7014 W7053720_4-0
Suction Tubes, Suction Elevator Angled models with cut-off hole Models with ball-ended tip Models with closed blunt distal end and lateral holes Suction elevator model Sinus Surgery, SIN-135 7015
Frazier Suction Tubes Kahn-Frazier Frontal Sinus Suction Tubes 210008 210010 210012 210015 210018 210020 Frazier suction tube, 9.5 cm working length, with mandrin, stainless, 8 Fr. 10 Fr. 12 Fr. 15 Fr. 8 Fr., with olive tip 10 Fr., with olive tip 211610 211710 Kahn-Frazier frontal sinus suction tube, 10 Fr. malleable shaft, cut-off hole, 13 cm working length, size 1, slightly curved size 2, strongly curved 210022 210025 12 Fr., with olive tip 15 Fr., with olive tip Frazier suction tube, ball-ended, 10 cm working length, 210016 6 Fr. 210018 8 Fr. 210020 10 Fr. Gorney Suction Elevator 405800 Gorney suction elevator, with mandrin, 3 mm tip, 19 cm Frazier suction tube, graduated at 5 9 cm, 10 cm working length, 211006 6 Fr. 211008 8 Fr. 211010 10 Fr. 350003 350004 Frazier suction tube, with cut-off hole, with mandrin, Luer, closed blunt distal end with holes, 15 cm working length, 3 mm 4 mm 350006 350008 350010 350012 350015 Frazier suction tube, with cut-off hole, with mandrin, Luer, 15 cm working length, 6 Fr. 8 Fr. 10 Fr. 12 Fr. 15 Fr. 7016 W7053720_4-0
Retractors and Spatulas Orbital retractor, double ended Standard retractor with grid handle Flexible spatulas Sinus Surgery, SIN-140 7017
Retractors and Spatulas 500000 Hajek lip retractor, tip 14 x 21 mm, serrated, 18 cm 502501 502502 502503 502504 Langenbeck retractor, 21 cm, 35 x 7 mm 35 x 10 mm 35 x 15 mm 60 x 20 mm 507100 Orbital retractor, double-ended, 22 mm/26 mm width, 25 cm Spatula, flexible, 20 cm, 507212 12 mm width 507217 17 mm width 7018 W7053720_4-0
Biopsy Forceps for Nasal Mucosa The guillotine effect forceps allow specimens with smooth cutting edges as well as adequate size (ca. 3 mm in diameter) and provide sufficient depth in the lamina propria without damaging the epithelium. Repeated biopsies per patient require a quick and easily performable method, so that the procedure is as comfortable as possible for the patient. The knife-sharp edge of the cutting cup hits the sharp edge of the conical receptacle without putting tangential pressure onto the specimen. The angle formed by the open forceps is even large enough to biopsy a hypertrophic turbinate without any difficulties. Sinus Surgery, SIN-145 7019
Fokkens Biopsy Forceps 336000 Fokkens biopsy forceps, straight, 8 cm working length, cutting width 3 mm, round 336045 Fokkens biopsy forceps, 45 upcurved, 11 cm working length, cutting width 3 mm, round 7020 W7053720_4-0
Biopsy and Polyp Grasping Forceps Models with straight and curved shafts Models with round, oval cupped and pear-shaped jaws Sinus Surgery, SIN-150 7021
Biopsy and Grasping Forceps Biopsy and Grasping Forceps (cont.) 515000 Biopsy and grasping forceps, double-action jaws, oval cupped, 2.5 mm jaws diameter, 1.5 mm shaft diameter, 15 cm working length 515070 Maxillary biopsy forceps, double-action jaws, oval cupped, 3 mm jaws diameter, shaft angled down 70, 12 cm working length 515110 Maxillary biopsy forceps, double-action jaws, oval cupped, 3 mm jaws diameter, shaft angled down 110, 11 cm working length Biopsy forceps, double-action jaws, oval cupped, 2.6 mm diameter, 110 backwards cutting, 18 cm, 335110 opening horizontally 335111 opening vertically 335170 335171 Biopsy forceps, double-action jaws, oval cupped, 2.6 mm diameter, 70 backwards cutting, 19.5 cm, opening horizontally opening vertically 515005 Biopsy and grasping forceps, double-action jaws, oval cupped, opening vertically, 4 mm jaws diameter, malleable shaft end, 18 cm working length 335114 335124 Biopsy forceps, double-action jaws, oval cupped, 4 mm diameter, 110 backwards cutting, 22 cm, opening horizontally opening vertically Binner Polyp Grasping Forceps 335300 335304 335301 335302 Binner polyp grasping forceps, pear-shaped, jaws 3 x 1.5 mm, 21 cm, 80 upturned, opening horizontally 45 upturned, opening horizontally 80 upturned, shaft curved left 80 upturned, shaft curved right 7022 W7053720_4-0
Suction Forceps Biopsy punches, nasal forceps Through-cutting models With integrated suction channel Straight and upturned models Sinus Surgery, SIN-151 7023
Biopsy Suction Punches Blakesley Suction Punches 335200 335201 Biopsy suction punch, through-cutting, 2 mm cutting width, 10 cm working length, with suction channel, straight 45 upcurved 335204 15 upcurved 337001 337002 Blakesley suction punch, straight, for biopsy and grasping, 11 cm working length, with suction channel, size 1 = 3.5 mm size 2 = 4 mm 338302 338312 Biopsy suction punch, through-cutting, 2.5 mm cutting width, serrated upper jaw, 10 cm working length, with suction channel, detachable, straight 45 upcurved 337101 337102 Blakesley suction punch, 45 upturned, for biopsy and grasping, 11 cm working length, with suction channel, size 1 = 3.5 mm size 2 = 4 mm Takahashi Suction Punches Blakesley Suction Forceps 336800 336801 336802 336900 336901 Blakesley suction forceps, straight, 4 mm diameter, 10 cm working length, with suction channel, size 0 = 2.5 mm size 1 = 3.5 mm size 2 = 2.5 mm Blakesley suction forceps, 45 upcurved, 4 mm diameter, 10 cm working length, with suction channel, size 0 = 2.5 mm size 1 = 3.5 mm 336902 size 2 = 4 mm 338001 338002 Takahashi suction punch, straight, for biopsy and grasping, with suction channel, 4 mm shaft diameter, 10 cm working length, size 1 = 3.5 mm size 2 = 2.5 mm Takahashi suction punch, straight, for biopsy and grasping, with suction channel, 4 mm shaft diameter, 10 cm working length, 338101 size 1 = 3.5 mm 338102 size 1 = 2.5 mm 7024 W7053720_4-0
Antrum Grasping Forceps 360 rotatable models Retrograde opening jaws 120 Sinus Surgery, SIN-155 7025
Antrum Grasping Forceps 515510 Antrum grasping forceps, 360 rotatable, finger post facilitates rotation, retrograde opening jaws 120, 10 cm working length 515500 Antrum grasping forceps, for endonasal removal of cysts and polyps, retrograde opening jaws 120, 10 cm working length 7026 W7053720_4-0
Punch and Giraffe Forceps Frontal Sinus Punch Forceps: through-cutting models with round cutting jaws Giraffe forceps: models with round and oval cupped jaws Double-action jaws Models with vertical and horizontal opening jaws Upturned shaft Sinus Surgery, SIN-160 7027
Frontal Sinus Punch Forceps 55 Giraffe Forceps 336201 336202 Through-cutting frontal sinus punch forceps, double-action jaws, cupped, 2 mm, 55 upturned, 14.5 cm working length, opening vertically opening horizontally 335403 335404 Giraffe forceps, double-action jaws, cupped, 2 mm, 55 upturned, 23 cm, opening vertically opening horizontally 336203 336204 Through-cutting frontal sinus punch forceps, double-action jaws, cupped, 2 mm, 90 upturned, 14.5 cm working length, opening vertically opening horizontally 335401 335402 Giraffe forceps, double-action jaws, cupped, 3 mm, 55 upturned, 23 cm, opening vertically opening horizontally 90 Giraffe Forceps 335413 335414 Giraffe forceps, double-action jaws, cupped, 4 mm, 55 upturned, 23 cm, opening vertically opening horizontally Giraffe forceps, double-action jaws, cupped, 2 mm, 90 upturned, 22 cm, 335405 opening vertically 335406 opening horizontally Giraffe forceps, double-action jaws, cupped, 4 mm, 90 upturned, 22 cm, 335409 opening vertically 335410 opening horizontally 7028 W7053720_4-0
Nasal Forceps Standard nasal forceps, sharp Straight and upcurved models Models with basket Models with 360 rotatable shaft Sinus Surgery, SIN-170 7029
Blakesley Antrum Forceps Blakesley Nasal Forceps 330500 330600 Blakesley antrum forceps, 9.5 x 4.5 mm, tube shaft, 10 cm working length, curved left curved right Blakesley Nasal Forceps, Rotatable 330901 330902 Blakesley nasal forceps, 360 rotatable, 45 upturned, 11 cm working length, size 1 = 6.5 x 3.5 mm size 2 = 10 x 4 mm 330000 330001 330002 330003 330100 330101 330102 330103 Blakesley nasal forceps, straight, 11 cm working length, size 0 = 3 mm size 1 = 3.5 mm size 2 = 4 mm size 3 = 5 mm Blakesley nasal forceps, 45 upcurved, 11 cm working length, size 0 = 3 mm size 1 = 3.5 mm size 2 = 4 mm size 3 = 5 mm 330200 330201 330202 330203 Blakesley nasal forceps, 90 upcurved, 11 cm working length, size 0 = 3 mm size 1 = 3.5 mm size 2 = 4 mm size 3 = 5 mm 331501 331502 331503 Blakesley nasal forceps, straight, 15 cm working length, size 1 = 3.5 mm size 2 = 4 mm size 3 = 5 mm 331601 331602 Blakesley nasal forceps, 45 upcurved, 15 cm working length, size 1 = 3.5 mm size 2 = 4 mm 331701 331702 Blakesley nasal forceps, 90 upcurved, 15 cm working length, size 1 = 3.5 mm size 2 = 4 mm 7030 W7053720_4-0
Nasal Forceps (cont.) Hartmann Nasal Cutting Forceps Struycken Nasal Cutting Forceps 329001 329002 329003 329004 Hartmann nasal cutting forceps, straight shaft, 11 cm working length, size 1 = 5 mm diameter size 2 = 7 mm diameter size 3 = 9 mm diameter size 4 = 10 mm diameter 327500 Struycken nasal cutting forceps, 11 cm working length Struempel-Voss Nasal Forceps 330300 Struempel-Voss nasal forceps, extra delicate, 2.5 mm, 45 upcurved, 10 cm working length Struempel Forceps 341000 341045 341090 Struempel forceps, 10 cm working length, oval cup-shaped jaws, 2.6 mm width, straight 45 upcurved 90 upcurved Takahashi Nasal Forceps 327001 327002 Takahashi nasal forceps, spoon 3 x 10 mm, 11 cm working length, straight 30 upturned Wigand Polyp Grasping Forceps 330400 Wigand polyp grasping forceps, spoon 6 x 14 mm, round shaped, 60 upcurved, 11 cm working length, Sinus Surgery, SIN-171 7031
Draf Ethmoid Forceps 338413 338416 Draf ethmoid forceps, very delicate, 2.4 mm width, straight, 13 cm working length 16 cm working length 338419 19 cm working length 338513 338516 Draf ethmoid forceps, very delicate, 2.4 mm width, 60 upcurved, 13 cm working length 16 cm working length 338519 19 cm working length 338613 338616 Draf ethmoid forceps, very delicate, 2.4 mm width, 90 upcurved, 13 cm working length 16 cm working length 338619 19 cm working length 338423 338426 Draf ethmoid forceps, very delicate, oval cupped spoon 3 mm x 1.5 mm, straight, 13 cm working length 16 cm working length 7032 W7053720_4-0
Sinus Forceps for Microsurgical Operations Especially for endonasal endoscopic or microscopic microsurgical operations: Removal of polypoid diseased mucous membranes, membrane remnants, lamellae of bone, septa and nasal polyps Special curved and slender instruments with long shafts for easier approach of the ostium and manipulation within the maxillary sinus. Facilitate the surgery of the agger-nasi, the frontal recess and the ostium of the frontal sinus. Delicate instruments for exact manipulation at anatomically critical places. Especially suitable for pre- and post-operative day surgery. Through-cutting, backbiter and oval cupped jaws models Sinus Surgery, SIN-180 7033
Complete Set of Moriyama Forceps Moriyama Forceps Size 7 15 326800 Moriyama instrument set (not shown), includes 15 forceps, size 1 15 (326801 326815) Moriyama Forceps Size 1 6 326807 Moriyama backbiter, through-cutting forceps, size 7 = 2.7 mm cutting width, shaft upcurved, oval cups, 14 cm working length 326801 Moriyama through-cutting forceps, size 1 = 5 x 1.5 mm, straight, delicate, 14 cm working length 326808 Moriyama through-cutting forceps, size 8 = 7.5 x 3 mm, shaft upcurved, 14 cm working length 326802 Moriyama through-cutting forceps, size 2 = 5 x 1.5 mm, straight shaft, upcutting, delicate, 14 cm working length 326809 Moriyama spoon forceps, size 9 = 7.5 x 3 mm, oval cups, upcurved shaft, delicate, 14 cm working length Moriyama through-cutting forceps, straight, 11.5 cm working length, size 10, small size = 7 x 2.5 mm size 11, large size = 7.5 x 3 mm 326803 Moriyama through-cutting forceps, size 3 = 5 x 1.5 mm, shaft upcurved, delicate, 14 cm working length 326810 326811 326804 Moriyama spoon forceps, size 4 = 6.5 x 2.8 mm, oval cups, straight shaft, delicate, 14 cm working length 326805 Moriyama spoon forceps, size 5 = 5.5 x 3 mm, straight shaft, oval cups, upwards, delicate, 14 cm working length 326806 Moriyama spoon forceps, size 6 = 6.5 x 2.8 mm, shaft upcurved, oval cups, upwards, delicate, 14 cm working length 326812 326813 326814 Moriyama through-cutting forceps, straight shaft, upwards, 11.5 cm, working length, size 12, small size = 6 x 2 mm size 13, medium size = 6 x 2.5 mm size 14, large size = 7 x 3 mm 326815 Moriyama through-cutting forceps, size 15 = 5 x 1.3 mm, shaft and jaws upcurved, delicate, 14 cm working length, 7034 W7053720_4-0
Through-Cutting Forceps Sharp, strong curved cutting punches and forceps. Serve to remove or fenestrate bone partitions, excise cysts and polyps. Through-cutting models were modified that a rigid lower jaw is used as a perforator while the mobile upper-jaw is the cutting part. Super punch, upper jaw with serrated surface prevents soft tissue or mucosa from slipping away. Through-cutting models, standard type. Sinus Surgery, SIN-185 7035
Wigand Through-Cutting Forceps Super Punch Through-Cutting Forceps The serrated surface of the upper jaw prevents soft tissue or mucosa from slipping away. Wigand universal forceps, through-cutting, Super punch, 334200 334245 14 cm working length, size 3 x 4 mm, straight 45 upcurved 336400 through-cutting, serrated upper jaw, straight, 13 cm working length, size 0, oval cutting width 2 mm 336401 336402 size 1, oval cutting width 2.5 mm size 1, oval cutting width 3 mm Wigand You see what you cut Forceps 336500 336501 336502 Super punch, through-cutting, serrated upper jaw, upcurved, 13 cm working length, size 0, oval cutting width 2 mm size 1, oval cutting width 2.5 mm size 2, oval cutting width 3 mm 334300 334345 Wigand forceps, through-cutting, 14 cm working length, large size (2.5 x 11.5 mm), straight 30 upcurved Blakesley Through-Cutting Forceps Wigand forceps, through-cutting, 14 cm working length, small size (2 x 6 mm), 334400 straight 334445 30 upcurved 335800 335801 335802 Blakesley through-cutting forceps, straight, 11 cm working length, size 0 = 3 mm wide, cutting width 2 mm size 1 = 3.5 mm wide, cutting width 2.5 mm size 2 = 4 mm wide, cutting width 3 mm 335900 335901 335902 Blakesley through-cutting forceps, 45 upcurved, 11 cm working length, size 0 = 3 mm wide, cutting width 2 mm size 1 = 3.5 mm wide, cutting width 2.5 mm size 2 = 4 mm wide, cutting width 3 mm 7036 W7053720_4-0
Through-Cutting Forceps (cont.) Draf Conchotome Yoon Forceps 338901 Draf conchotome, through-cutting, very delicate, oval jaws, 3 mm x 1 mm, 14 cm working length, straight Yoon punch, through-cutting, cutting width 2 x 6 mm, oval, shaft 70 upcurved, 13 cm working length, 336601 jaws opening sidewards to left 336602 jaws opening sidewards to right 336611 336612 Yoon fontanelle forceps, through-cutting, horizontal opening, cutting width 2.5 x 5 mm, oval, 13.5 cm working length, left curved right curved Sinus Surgery, SIN-190 7037
7038 W7053720_4-0
Antrum Punches Sidebiting models and backbiters 360 rotatable backbiters, micro backbiter Backbiters with integrated suction channel Sinus Surgery, SIN-195 7039
Sidebiting Antrum Punches Rotating Backbiters 334801 334802 Sidebiting antrum punch, through-cutting, 3 mm cutting width, 13 cm working length, forward cutting, down left forward cutting, down right The rotating system allows backward cutting to the left, the right and upwards. Rotating backbiter antrum punch, 10 cm working length, 335011 pediatric size: 1.5 mm cutting width 335010 adult size: 2.5 mm cutting width Antrum Backbiters 335000 335001 335002 Antrum punch, 10 cm working length, adult size: 2.5 mm cutting width, backward cutting, up backward cutting, left backward cutting, right Rotating backbiter antrum punch, finger post facilitates 360 rotation, 10 cm working length, 335015 pediatric size: 1.5 mm cutting width 335025 adult size: 2.5 mm cutting width 335020 335021 335022 Antrum punch, 10 cm working length, pediatric size: 1.5 mm cutting width, backward cutting, up backward cutting, left backward cutting, right 335050 Tobey micro backbiter, 2 mm cutting width, finger post facilitates 360 rotation, 10 cm working length, shaft curved down 7040 W7053720_4-0
Antrum Punches (cont.) Pediatric Antrum Suction Backbiters Antrum Suction Backbiters for Adults 334900 334901 334902 Antrum suction backbiter, 2 mm cutting width, straight, 10 working length, 4 mm shaft diameter, with integrated suction channel, backward cutting, up backward cutting, left backward cutting, right 335100 335101 335102 Antrum suction backbiter, 2.5 cutting width, 10 cm working length, straight, 5 mm shaft diameter, with integrated suction channel, backward cutting, up backward cutting, left backward cutting, right 334904 Antrum suction backbiter 2 mm cutting width, curved up, 10 working length, 4 mm shaft diameter, with integrated suction channel, backward cutting, up 335104 Antrum suction backbiter (not shown) 2.5 cutting width, 10 cm working length, curved up, 5 mm shaft diameter, with integrated suction channel, backward cutting, up Sinus Surgery, SIN-196 7041
7042 W7053720_4-0
Nasal Scissors Nasal scissors, concha and ethmoid scissors, standard type, sliding shaft and tubing shaft models Serrated blade models Smooth and very delicate models Sinus Surgery, SIN-200 7043
Nasal Scissors Draf Ethmoid Scissors Nasal scissors, serrated blades, 13 cm working length, 326200 straight 326201 curved left 326202 curved right Heymann Nasal Scissors 338713 338716 338719 Draf ethmoid scissors, very delicate, 4.5 mm jaws length, straight, 13 cm working length straight, 16 cm working length straight, 19 cm working length 326000 326100 326011 Heymann nasal scissors, standard model, 9 cm working length 9 cm working length, serrated blades 11 cm working length Belucci Scissors 342000 Belucci scissors, 7 mm jaws length, 10 cm working length, straight Heymann nasal scissors, smooth blades, 9 cm working length, 326009 straight 326101 curved left 326102 curved right 7044 W7053720_4-0
Circular Cutting Punches For enlargement of openings in the sphenoid frontal wall Can be used to cut out pieces of the nasal concha, thin bone segments, bony ethmoid septa Useful for treatment of choanal atresia Full circle of 360 cutting without rotating the instrument, models with integrated suction channel By punching exclusively in the sagittal axis, there is a reduced risk of traumatizing the cranium, the carotis and the optic nerve osseous canal The rigid inside cutting jaws prevent the removal of tissue or mucosa while cutting Sinus Surgery, SIN-205 7045
Circular Cutting Punches Circular Cutting Punches with Suction Channel Circular cutting punch, cutting in a full circle of 360, 16 cm working length, 334735 3.5 mm diameter 334745 4.5 mm diameter 334765 65 upturned, 3.5 mm diameter 334835 334845 Circular cutting punch, with integrated suction channel, allows cutting in a full circle of 360 with simultaneous suction, 16 cm working length, 3.5 mm diameter 4.5 mm diameter 334935 334945 Circular cutting punch, cutting in a full circle of 360, 18 cm working length, 3.5 mm diameter 4.5 mm diameter Circular cutting punch, cutting in a full circle of 360, 65 upturned, 17 cm working length, 334965 3.5 mm diameter 334975 4.5 mm diameter 7046 W7053720_4-0
Sinus Punches Through-cutting models, backward cutting models with deposit to pick up and collect bone material 360 rotatable models, detachable models Up- and downbiting models Upturned models for frontal sinus Sinus Surgery, SIN-210 7047
Beyer Antrum Punches McKenty Sphenoid Punches 512500 512600 Beyer antrum punch, through-cutting, 2 mm cutting width, 9 cm working length, for endonasal fenestration, for children, cutting 90 up backward cutting 513100 McKenty sphenoid punch, through-cutting, slender pattern, 2 mm cutting width, rotatable 360, 14.5 cm working length Frontal Sinus Punch 512603 Frontal sinus punch forceps, shaft 70 upturned, cutting width 3 mm, forward cutting 40 up, 17.5 cm working length Heermann Ethmoid Punch Sphenoid Punches With deposit to pick up and collect bone material. Enables to work continuously. Collected material can be removed using the mandrin. Bone punch, through-cutting, with mandrin, 512402 18 cm working length, 2 mm cutting width 512403 15 cm working length, 3 mm cutting width 512800 Heermann ethmoid punch, backward cutting, opening width 17 mm, cutting width 2.5 mm 512410 Mandrin (not shown), spare for 512402/-03 7048 W7053720_4-0
Sinus Punches (cont.) Kerrison Sphenoid Punches Hajek-Kofler Sphenoid Punches Detachable for reprocessing 512902 512903 512922 512923 FS-Kerrison sphenoid punch, cutting up 90, 18 cm working length, 2 mm cutting width 3 mm cutting width FS-Kerrison sphenoid punch, cutting up 40, 18 cm working length, 2 mm cutting width 3 mm cutting width 512202 Hajek-Kofler sphenoid punch, backward cutting, down 45 backward cutting, down 45 cutting width 4 x 4 mm 512302 512301 Hajek-Kofler sphenoid punch, forward cutting, up 45, 14 cm working length, cutting width 2 x 2 mm cutting width 4 x 4 mm Hajek Sphenoid Punches 512001 512002 512201 Hajek sphenoid punch, 4 mm width, 14 cm working length, cutting up 90 cutting down 90 backward cutting, up 45 513000 Hajer-Kofler sphenoid punch, 360 rotatable, slender pattern, 17 cm working length Sinus Surgery, SIN-215 7049
7050 W7053720_4-0
Nasal and Sinus Specula Models with shortened, serrated blade and set-screw Models for adults and children Sinus Surgery, SIN-220 7051
Hartmann Nasal Specula Sinus Specula 143001 Hartmann nasal speculum, large size, 13.5 cm, for adults 143002 Hartmann nasal speculum, small size, 13 cm, for children 497601 497602 497603 497604 497605 497606 Sinus speculum, shortened blade, serrated, with set screw, length 15 cm, adaption to flexible tension arm 218800, left blade, 55 mm right blade, 55 mm left blade, 65 mm right blade, 65 mm left blade, 75 mm right blade, 75 mm Sinus speculum, blades without teeth, with set screw, adaption to flexible tension arm 218800, 497801 left blade 55 mm, right blade 35 mm 497802 right blade 55 mm, left blade 35 mm 497803 left blade 75 mm, right blade 35 mm 497804 right blade 75 mm, left blade 35 mm 497805 left blade 75 mm, right blade 52 mm 497806 right blade 75 mm, left blade 52 mm 498001 498002 Sinus speculum Wuerzburg, for children, shortened blade, serrated, with set screw, 13 cm length, adaption to flexible tension arm 218800, left blade 25 mm, right blade 18 mm right blade 25 mm, left blade 18 mm 7052 W7053720_4-0
Flexible Tension Arm System Complete with holding rod for attachment to operating table Optional clamp and adapter Sinus Surgery, SIN-225 7053
Flexible Tension Arm 218800 Flexible tension arm, complete with holding rod for attachment to operating table 218801 Rotation clamp, for flexible tension arm 218800, attachable to operating table 218803 Telescope clamp, fitting to sinuscopes 218804 Adapter, for flexible tension arm 218800, for Cottle nasal specula with set screw 7054 W7053720_4-0
Arm System Fast and stable fixing Only one central set screw Powerful holding force Fully autoclavable Universally applicable Sinus Surgery, SIN-230 7055
OPEN CLOSE Arm System 218700 Flexible tension arm, L-stand 470 x 170 mm, 18.5" x 6.7" with look Arm System (cont.) 218711 Adapter, for retractor/laryngoscope, to the support with look 218720 Adapter, for retractor/optic/mouth gag, to the support with look 218705 Clamp socket, for hinged arm support, electrical isolated, up to 4.5 KV AC for Rail 25/35 x 8/10 mm, 1/1.4 x 0.3/0.4" 7056 W7053720_4-0
Curettes, Probes, Elevators, Knives Curettes Elevators 230715 Antrum curette, curved 7 mm 270202 Dunning elevator-curette, double-ended, 185 mm (7.3") overall length, ebony finish 3 mm 10 mm 5 mm 10 mm 3 mm 70230757 Antrum curette, 70 angled, 1 pc. 6.5 mm 550737 McCollough elevator, round, knurled handle, double-ended, 190 mm (7.5") overall length 2 mm 12 mm Probes 230725 Probe, double-ended 2.3 mm 70230770 70230771 Ostium seeker probe, stainless steel, 210 mm (8.3") overall length, 1 pc., non-sterile, frontal ostium seeker maxillary ostium seeker 10 mm 2 mm 1.5 mm 7 mm 70231050 Suction elevator, Ries, 210 mm (8.3") overall length 3 mm 22 mm 1.5 mm Needles 18 mm 1.2 mm 8 mm 230666 230667 230668 Septal needle (not shown), with Luer-lock, straight knee bent bayonet Sinus Surgery, SIN-405 7057
Reusable Knives Single Use Knife 70130977 70130980 Sickle knife, straight, 4 pcs., sharp blunt 130801 Sickle knife, for sinus endoscopy, stainless steel, sterile, single use, 6 pcs. 70130978 70130979 Synechia knife, curved blade, sharp, 4 pcs., right left 70130981 Rains maxillary ostium knife, 90 bend, double-edge, 4 pcs. 230580 Sickle knife, blunt point, 190 mm (7.5") overall length, straight blade 10 mm Sickle knife, sharp point, 190 mm (7.5") overall length, 230582 straight blade 230594 30 left blade angle 230595 30 right blade angle 10 mm 10 mm 10 mm 7058 W7053720_4-0
Forceps, Punches, Scissors Takahashi Forceps Weil Blakesley Forceps (cont.) 230676 Takahashi forceps, straight, large, 100 mm shaft length 5 mm 11.5 mm Weil Blakesly forceps, 3.6 mm jaws width, 230734 curved right 30 230708 upturned 90, long 3.6 mm 10 mm 270155 Takahashi nasal forceps, straight, cupped, 2.5 mm jaws width, 120 mm (4.7") shaft length, ebony finish 10 mm 20 mm 3.6 mm 230706 230707 Weil Blakesly suction forceps, 3.6 mm jaws width, upturned 90, long upturned 90 20 mm 3.6 mm Weil Blakesley Forceps 3.6 mm 230732 230733 Weil Blakesly forceps, 2.5 mm jaws width, curved right 30 curved left 30 2.5 mm 10 mm 5.5 mm 230673 230674 Weil Blakesly forceps (not shown), 3.6 mm jaws width, upturned straight 2.5 mm 5.5 mm Sinus Surgery, SIN-410 7059
Punch 76510555 76510556 Punch, circular cutting, mushroom type, 1 pc., 180 mm working length, 3.5 mm jaws width 4.5 mm jaws width 3.5 mm 4.5 mm Backbiters 230719 230721 Medium backbiter (not shown), straight left Scissors 230877 230878 230879 Nasal scissors, pediatric, 100 mm shaft length, straight curved right curved left 4 mm 5 mm 5 mm 70230758 Nasal scissors, pediatric, 45 upturned 5 mm 7060 W7053720_4-0
Frontal Forceps Ostium Forceps Giraffe Forceps 76510601 Ostium forceps, stainless steel, frontal, 70, upturned shaft, 125 mm (5") working length, small, 2 mm jaws width, 2.5 mm 2 mm 76510569 Giraffe forceps, for polyps, stainless steel, 80 upturned shaft, 115 mm (4.5") working length, pear-shaped, cupped jaws, 5.8 mm jaws width, 6.5 mm jaws length, matte finish, 1 pc. 5.8 mm 6.5 mm 2.5 mm jaws length, 1 pc. 76510600 Ostium forceps, stainless steel, frontal, 70, upturned shaft, 125 mm (5") working length, standard, 3 mm jaws width, 3.5 mm jaws length, 1 pc. 3.5 mm 3 mm 76510604 Ostium forceps, stainless steel, frontal, 70, upturned shaft, 125 mm (5") working length, standard, 5 mm jaws width, 5.5 mm jaws length, 1 pc. 5.5 mm 5 mm Sinus Surgery, SIN-415 7061
Giraffe Biopsy Forceps Giraffe Biopsy Forceps (cont.) 70230744 70230745 70230746 Biopsy forceps, double spoon, vertical, stainless steel, matte finish, 1 pc., 2.7 mm jaws width, 5 mm jaws length, 45 upturned 4 mm jaws width, 6.8 mm jaws length, 45 upturned 4 mm jaws width, 7 mm jaws length, 70 upturned 2.7 mm 70230750 70230751 70230752 Biopsy forceps, horizontal, short, stainless steel, matte finish, 1 pc., 2.7 mm jaws width, 5 mm jaws length, 45 upturned 4 mm jaws width, 5 mm jaws length, 45 upturned 4 mm jaws width, 5 mm jaws length, 70 upturned 2.7 mm 5 mm 5 mm 4 mm 4 mm 5 mm 4 mm 6.8 mm 7 mm 4 mm 5 mm 70230747 70230748 70230749 Biopsy forceps, horizontal, stainless steel, matte finish, 1 pc., 2.7 mm jaws width, 5 mm jaws length, 45 upturned 4 mm jaws width, 6 mm jaws length, 45 upturned 4 mm jaws width, 6 mm jaws length, 70 upturned 70230753 70230754 70230755 Biopsy forceps, vertical, short, stainless steel, matte finish, 1 pc., 2.7 mm jaws width, 4 mm jaws length, 45 upturned 4 mm jaws width, 5 mm jaws length, 45 upturned 4 mm jaws width, 6 mm jaws length, 70 upturned 2.7 mm 5 mm 2.7 mm 4 mm 6 mm 4 mm 4 mm 4 mm 5 mm 4 mm 6 mm 6 mm 7062 W7053720_4-0
Frontal Forceps (cont.) Specialty Biopsy Forceps Specialty Biopsy Forceps (cont.) 230710 230711 230575 230712 Biopsy forceps, double spoon, for removal of delicate tissue, 70 upturned, 2 mm jaws width, 6 mm jaws length, horizontal 2 mm jaws width, 5 mm jaws length, horizontal, short 2.8 mm jaws width, 5 mm jaws length, vertical 2 mm jaws width, 5 mm jaws length, vertical, short 230578 Biopsy forceps, double spoon, for removal of delicate tissue, 100 upturned, 2 mm jaws width, 7 mm jaws length, horizontal 2 mm 7 mm 2 mm 6 mm 2 mm 5 mm 2.8 mm 5 mm 2 mm 5 mm Sinus Surgery, SIN-420 7063
Punch Forceps Weil Blakesley Forceps 230726 230728 Forceps, through-cutting, straight, 105 mm (4.1") shaft length, 2.5 mm jaws width, pediatric 3.6 mm jaws width 230730 4.8 mm jaws width 2.5 mm 3.6 mm 5 mm 230577 230713 230714 Punch forceps, through-cutting, for dissection of delicate tissue, 70 upturned, 2 mm jaws width, 6 mm jaws length, vertical 2 mm jaws width, 5 mm jaws length, horizontal 2 mm jaws width, 6 mm jaws length, horizontal, short 230593 2.5 mm jaws width, 7 mm jaws length, vertical, short 4.8 mm 8 mm 14 mm 2 mm Forceps, 2.5 mm 6 mm 230727 through-cutting, 45 upturned, 95 mm (3.8") shaft length, 2.5 mm jaws width, pediatric 5.5 mm 2 mm 230729 230731 3.6 mm jaws width 4.8 mm jaws width 3.6 mm 5 mm 5.5 mm 2 mm 4.8 mm 6 mm 13 mm 2.5 mm 7 mm Forceps, 70230743 70230742 through-cutting, curved left curved right 3.6 mm 6.5 mm 230592 Punch forceps, through-cutting, for dissection of delicate tissue, straight, 2 mm jaws width, 4 mm jaws length 2 mm 4 mm 3.6 mm 6.5 mm 7064 W7053720_4-0
Suction and Irrigation Weil Blakesley Forceps with Suction Fergusson Frazier Suction Kit 70230736 70230738 70230740 Forceps with suction, through-cutting, straight, 105 mm (4.1") shaft length, 2.5 mm jaws width 3.6 mm jaws width 4.8 mm jaws width 2.5 mm 3.6 mm 2 mm 130804 Fergusson Frazier suction kit, sterile, single use, 6 units 9 mm 4.8 mm 14 mm Each unit includes: 6 Fr. (2 mm) suction tube, 9 Fr. (2.8 mm) suction tube, 11 Fr. (3.6 mm) suction tube, handle with bypass Fergusson Suction Tube 70230737 70230739 70230741 Forceps, through-cutting, upturned, 95 mm (3.8") shaft length, 2.5 mm jaws width 3.6 mm jaws width 4.8 mm jaws width 2.5 mm 5.5 mm 3.6 mm 8 mm 230875 Suction tube (not shown), calibrated, 100 mm (3.9") working length, 160 mm (6.3") overall length, with finger cut-off With depth marking: Marks at 5 9 cm from tip. 4.8 mm 8 mm Sinus Surgery, SIN-425 7065
Post-Op Suction Tube 70130987 70130995 Suction tube (not shown), 14 gauge, green finish, 4 pcs., curved left frontal Rains Malleable Irrigation 70131011 Irrigation tube, stainless steel, 387 mm (15.2") overall length, sterile, single use, 6 pcs. 7066 W7053720_4-0